View Full Version : Jdm Coolant Bottle bracket
slideways
30th September 2009, 12:33 PM
Could someone please take close up photo's of said bracket, and any dimensions you could be bothered to measure.
There aren't enough spare's of these, so I am going to make my own.
Can also do a write up if people care enough.
Cheers
Nikkojoe
30th September 2009, 01:08 PM
I will finish making mine today if you want and put a picture up. Just make sure the width of the thing is the same as the groove.
Otherwise if i get a chance ill take a pic of the standard one
slideways
30th September 2009, 01:30 PM
i will finish making mine today if you want and put a picture up. Just make sure the width of the thing is the same as the groove.
Otherwise if i get a chance ill take a pic of the standard one
good man!!!!
Nikkojoe
30th September 2009, 07:15 PM
ok so i didn't end up doing mine but i drew a picture of what it roughly looks like:
http://www.ae86drivingclub.com.au/forums/attachment.php?attachmentid=6456&stc=1&d=1254298475
The two holes are where it bolts onto the strut tower so measure the distance between them on your car.
todd
30th September 2009, 07:21 PM
MS paint architectural perspective at it's finest ladies and gentlemen ^^
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.