View Full Version : 4AGE Altenator in ADM AE86
dtour
12th October 2009, 05:58 PM
Hi
Im a little unsure of how to wire in the 20V alternator into the body loom,
as i understand it the 4AC had an external regulator were as the 20v alt has an in built regulator.
how do i go about wiring the 20v alt in?
i cant rely on wire colours either my 20v alt was missing the plug so i replaced it with a new connector and some pins from a couple of unused plugs.
Cheers,
Jon
ke70dave
12th October 2009, 06:20 PM
this is what i used when i put a 20V alternator in my car
http://www.rollaclub.com/faq/index.php?title=Tech:Engine/A_Series/Alternator_Wiring_Diagram
should do the trick for you.
dtour
12th October 2009, 06:27 PM
any one know the pin out order on the 4ag alternator? do i have to do anything with the original voltage regulator wiring?
ke70dave
12th October 2009, 06:42 PM
just get the multi meter out mate, forget about the original voltage regualtor, just pull it out. you only need to find the few powers, and then the alternator light. done!
Nikkojoe
13th October 2009, 01:27 AM
The voltage regulator plug has 2 of the wires you need to join to. These are:
Ignition - Black Yellow
Lamp - Yellow/Yellow White
Most fwd seem to have the same colour wires as the adm 4ac setup.
The sense wire is usually white and pretty thick. Usually just connect this to the battery/bolt on strap on the alternator. In the end it goes back to the battery anyway.
dtour
14th October 2009, 12:06 AM
sweet if all else fails ill just get an auto electrician to come fix it
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.