PDA

View Full Version : AE71 20v Show To Drifter



4A-G3
25th October 2009, 10:30 PM
Engine: 4A-GE 20valve ( Needs After Market ECU)

Exhaust: TRD Extractors With 2.25inch All Through With 3inch Tip

Suspension: White Line Sway Bars, Strut Brace With Stock Shocks and Cut Springs Not Very Nice ( Want Cheap KE70 Kings Front And Rear And Also Camber Top For Front For Now)

Wheels: anz Ghosts 18x7.5 ( Want Tanky Drift Wheels With Good Offset Hopefully White Rota Grids )

Modifications: 20valve, Full Tan Interior, Paint, Wheels, Tail Shaft ect ect

Stereo Audio / Visual: Pioneer DVD With MTX Splits

Estimated Power: Not Sure


Just Posting This To See What Ideas People Give Me On How To Do it To Make It A Show Drifter


Wanting To Do To The Car

*Fully Adjustable Coil Overs
*16x8 White Rota Grids
*Microtech ECU
*Remove as much unwanted plastics as possible
*Convert Cluster To Full AutoMeter Set Up
*Door Trims To Sheet Metal
*Quad Light Conversion
*Front And Rear Chrome Bar And Front Bottom Lip Like Grant Scotts AE71/KE70



Just Throw Me Some Ideas

ke_70
25th October 2009, 10:46 PM
get springs from lawson from ajps cheaper better and he'll help you get the right rates
id also go 15s if you really want a change

Konakid
25th October 2009, 10:52 PM
*Fully Adjustable Coil Overs
As well as replace all the bushes, strut braces, rear springs, shocks, panhard rod.

*16x8 White Rota Grids
Something jap 14x7~8
Something local, Performance Superlite 15x8, challenger 15x8 or 14x7
Some MA61 Supra 14x7's

*Microtech ECU
Yeah ok.

*Remove as much unwanted plastics as possible
Full interior will keep it streetable, leave it.

*Convert Cluster To Full AutoMeter Set Up
Waste of money, just get a tacho dash.
If you need an oil temp and water temp gauge, chuck them in somewhere neat

*Door Trims To Sheet Metal
Don't bother

*Quad Light Conversion
Dont bother

*Front And Rear Chrome Bar And Front Bottom Lip Like Grant Scotts AE71/KE70
Don't bother, Satin black the grille, ditch the toyota grille badge, paint the bumpers satin black, door mirrors satin black, wipers satin black, get stock number plates



Just Throw Me Some Ideas

That will make the car look about, hmmm, 10000000times better than it does now.

corknose
25th October 2009, 11:00 PM
i like the sound of your plans. sorry for hating on you before its just most people that come on here just wanna sell there car and are complete fuckwits but u seem pretty sweet but like konakid said do all the things he said start with suspention then wheels.

4A-G3
25th October 2009, 11:11 PM
i like the sound of your plans. sorry for hating on you before its just most people that come on here just wanna sell there car and are complete fuckwits but u seem pretty sweet but like konakid said do all the things he said start with suspention then wheels.


yea all good man just really stuck with the coil overs and all the sus. not sure what to get like i can get ae86 coilovers but not sure what mods are needed

corknose
25th October 2009, 11:20 PM
none they bolt straight in.

Chaos Theory
26th October 2009, 12:09 AM
do exactly as konakid said and this will be dope.

just a recap on the aesthetics.

Black Mirrors
Black Bars
Black Wipers
Black grill minus the toyota badge
and some 14x7 +/- 0 offset wheels would be perfect.

and most definitely change the number plate to random letters and numbers.
all people need these days is your number plate make a call and you get fucked over. cmerln is way too easy to remember.


also buy sundee86's coil overs.

4A-G3
27th October 2009, 09:45 PM
vid http://www.youtube.com/watch?v=BZNcxevmGd8

Sherlock
3rd November 2009, 04:38 PM
Ok, so out of 9 pages of Bull shit, there was 8 ok posts to leave up.

Lets try and keep this Members ride thread helpful to '4A-G3' but at the same time let him do what he wants.

You all need to realise its not your car, he can do what he likes with his car. If he asks for guidance, give it, otherwise, STFU and keep negative opinions to yourself.

Joshie_Mcslide
4th November 2009, 09:10 PM
Shattered....none of mine made the cut!

Should be a good thing when your done with it man!
look forward to seeing it de pimped!
Good luck with it all!

Josh

4A-G3
4th November 2009, 09:13 PM
Shattered....none of mine made the cut!

Should be a good thing when your done with it man!
look forward to seeing it de pimped!
Good luck with it all!

Josh

thanks man alredy in progress starting with them wheels

Joshie_Mcslide
4th November 2009, 09:17 PM
what you end up getting? or what are you getting?

4A-G3
4th November 2009, 09:59 PM
xxr 513 15x8 3.5" dish 0+ offset

corknose
4th November 2009, 10:06 PM
good choice cheap and look good,

86TRD
6th November 2009, 12:52 PM
hows everything coming along?

stahlz_ae86
6th November 2009, 09:02 PM
xxr 513 15x8 3.5" dish 0+ offset

Plain black with red stripe yeah?

4A-G3
25th November 2009, 03:18 PM
far haven't been on here in a while went on a holiday. well i hope i can still get the xxrs for that fabulous price, just bought cusco camber tops and supplying all the suspension this week and then pick up my orded ecu from microtech and head off to NG Japs.

marvis
25th November 2009, 05:04 PM
That wheel choice is no better then whats on it.

corknose
25th November 2009, 06:22 PM
they will do fine for the time being, not a bad rim, peoplle will say omg not jdm enough but who cares they arew cheaps have a nice offset.

stahlz_ae86
25th November 2009, 06:26 PM
15X8's for 600 bucks delivered is not bad, you'd maybe get a set of 14X6 watanabe's for that money. I'll probably get some for my pano soon as "temp rims" until I can afford a nice set of SSR MKII's in same size.

corknose
25th November 2009, 06:28 PM
idzactly, use them till u have the funds and use them as skidders, like 15's are fail but 600 bucks whos complaining.

stahlz_ae86
25th November 2009, 06:39 PM
15's are fail I agree but I will need to run them to clear brakes.