View Full Version : 14 x 8.5 -20
DAMO46
14th November 2009, 09:39 PM
Are these wheels to big for stock rear guards? If so what work would they need?
ae86
14th November 2009, 09:49 PM
a decent pull on the lip that goes down flat, maybe round it so it continues the curve of the rest of the guard,
DAMO46
14th November 2009, 09:56 PM
so u reckon they wont fit stock guards?
corknose
14th November 2009, 10:03 PM
he had 14x9 -25 with 185/60 with a lipped gaurd and it rubbed a bit n was pretty mexican.
DAMO46
14th November 2009, 10:05 PM
mm mexican
ae86
14th November 2009, 10:08 PM
mine are 14x8.5 -4 and the lip just hangs out stock guards looks wrong until i slam my car, bending that little lip out will give you an extra 10mm or so of guard so it will look much better than keeping it standard, if inside is lipped up already just need to pull that edged lip out make it inline with the rest, even dolly and hammer it yourself.
DAMO46
14th November 2009, 10:14 PM
thanks dave u got any pics of the rear of ur car?
corknose
14th November 2009, 10:15 PM
http://ae86drivingclub.com.au/forums/showthread.php?t=8729&page=2
DAMO46
14th November 2009, 10:18 PM
thats with his old wheels callum, though chin up mate your doing great
corknose
14th November 2009, 10:18 PM
oh i thought thats what you wanted.
DAMO46
14th November 2009, 10:20 PM
some one hasnt been following the thread..
chin up
ae86
14th November 2009, 10:24 PM
http://i55.photobucket.com/albums/g146/Filoe/SDC10636.jpg
thats kinda from rear but i mean i can guarantee its inline with guard and panhard is corrected, yours will be another 13mm further out.
Konakid
15th November 2009, 03:05 AM
8.5 -6 sits only slightly in the guard with the rear guard flared to follow the original guard curve.
It will have 10cm of poke.
Will sit the same as these on Gillys old AE86. 14x9 -25 185/60
http://www.ae86drivingclub.com.au/dcimages/1/5/1244.jpg
http://www.ae86drivingclub.com.au/dcimages/1/5/1240.jpg
DAMO46
15th November 2009, 03:20 AM
have a look at this
Fr:
- 14x8 -6, 195/60 tyre
- ~ -2 camber
- stock guard
Rr:
- 14x8.5 -13, 195/60 tyre
- stock guard
http://www.ae86drivingclub.com.au/dcimages/2/6/8/2/28762.jpg
todd
15th November 2009, 03:54 AM
sigh * nevermind
DAMO46
15th November 2009, 04:07 AM
todd u is crazzzzziieee
blair
15th November 2009, 10:01 AM
all depends on how low you wanna go man!
with completely rolled out rear guards and 8's -15, 80mm at rails scrubs like a bitch lol.
ke70dave
15th November 2009, 11:26 AM
http://www.ae86drivingclub.com.au/forums/showthread.php?t=645
have a look through that, will give you an idea.
when people say their wheels "fit" it is a loose term:P.
some consider 1mm of clearance fitting, with continual scrubbing.
DAMO46
16th November 2009, 09:35 PM
just put them on they fit like a mexican glove
Robo86
18th November 2009, 02:41 PM
14x8.5 -22, Stock guard.
http://www.ae86drivingclub.com.au/dcimages/6/9/17910.jpg
Please note:
http://2.bp.blogspot.com/_JdFs87ua_1s/R5Ys3mh_0tI/AAAAAAAADW0/2VOW_4o46Yo/s400/mexican_bandito.jpg
:)
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.