PDA

View Full Version : my XL levin (mz11 soarer)



domokun
25th December 2009, 12:44 PM
hi ther first post on here in like 2 years for got my username / password :P . heres my mz11 soarer i bought of jon a little while ago now. its still running the 6mge with a w57 and a ma61 lsd that has seen better days but i dynoed it my iphone and made 104kw :D. since iv had it iv replced a few bushes here and there, powersteeering rebuild kit and a new heavy duty clutch. i have a set of s13 kei office coil overs and break assembley ready to go in but need new wheels to fit the s13 gear.

after the suspension is done ill be getting stainless steel mandrel bent exctrators and exhaust made up for it. a new dif, wheels all round and a new paint job.

eventually id like to put a 1jz or 1uz in it either way it would be wicked in this car.

any way heres some pics of how it is atm

http://www.ae86drivingclub.com.au/dcimages/4/0/1/7/32418.jpg
http://www.ae86drivingclub.com.au/dcimages/4/0/1/7/32419.jpg
http://www.ae86drivingclub.com.au/dcimages/4/0/1/7/32420.jpg

dyno readout off the phone with slipping clutch
http://www.ae86drivingclub.com.au/dcimages/4/0/1/7/32421.jpg

marvis
25th December 2009, 02:20 PM
How does that dyno work?

What size wheels are you looking at?

marvis.

domokun
25th December 2009, 02:45 PM
setup up the app with weight of the car capacity etc and drive terrain loss avg 15% for manual 20% for auto, then u accelerate to watever speed and it measures the g and how much power from that sized motor is required to move and object of that size so far using the gps. also does ur quarter mile times and wat not.

as for wheels 15x8j ish 0 to -15 offset for the front and 15x9-10j at least -25off for the rear

45KIDS
25th December 2009, 03:05 PM
Seen this at qr a few times. Will look cool when it's back to it's old lowdown style!

If you wanna sell them ma61 wheels pm me

domokun
25th December 2009, 03:08 PM
not ma61 wheels there soarer wheels half and inch narrower and +20 offset from memory

slydar
25th December 2009, 04:02 PM
good car. totally rate it.

spiderman
26th December 2009, 04:16 AM
I tried to swap my old Scorp for this thing while it was FS on auszoku. I was only half joking too :P

dr1ft-pig
26th December 2009, 11:08 AM
sick car man... hope you make it half as good as what john had it coz it will still be sick

domokun
26th December 2009, 12:31 PM
had a bit of fun with the new clutch on xmas day in the rain got pulled over twice for rbts tho :P i have noticed tho on a down shift without using heel and toe thers a whine cant pin point it so i don't no if its comming from the diff or gear box.

ae71
26th December 2009, 01:39 PM
most likely the gearbox if you only notice it on a downshift. nothing to worry about.

should be able to fit s13 brakes on, they require 15"minimum for sr20det brakes. you could always test fit a wheel over the brakes.

btw i was going to buy this car a while back. im semi obsessed with z10 soarers. FK this one up, ill find you and mash your face with a potato masher :) just a friendly warning.

domokun
26th December 2009, 02:48 PM
its not the breaks the don't fit its the centering lip on the disk doesn't fit though the standard Toyota wheels

domokun
30th December 2009, 08:58 PM
new wheels but needs to be lower!!!!
http://www.ae86drivingclub.com.au/dcimages/4/0/1/7/32981.jpg

slide86
30th December 2009, 09:05 PM
i think you will need a spacer on the rear too...maybe 20mm

Breaka
30th December 2009, 09:08 PM
Mz11's are quite possibly my most favourite automobile.
Really loving it, hope it gets lower and wiiiiiddder.

Javal
31st December 2009, 12:16 AM
Your car needs a 1.5" lower ride height at both ends and 15x10 -24 Challengers for epic win.

However, the current win level is fairly reasonable.

domokun
31st December 2009, 06:11 AM
Ithink it'll need more then-24 wen 1.5"lower it has IRS:)

domokun
7th January 2010, 11:06 PM
coilovers back in so its back to low down just need wider wheels on the rear with more offset and raise it in the rear a tiny little bit. will get pics soon.
specs from wheel alignment -4 camber on the rear -2.5 on the front 2deg toe out and max caster in the front

domokun
8th January 2010, 05:50 PM
low down pics :D reinstalled jons coilovers
http://www.ae86drivingclub.com.au/dcimages/4/0/1/7/33776.jpg
http://www.ae86drivingclub.com.au/dcimages/4/0/1/7/33777.jpg
http://www.ae86drivingclub.com.au/dcimages/4/0/1/7/33778.jpg

shichi~
8th January 2010, 05:59 PM
id love to have one of these! phat car man!

domokun
8th January 2010, 06:19 PM
heres a quote from wat 2 guys said to me wen i came out after paying for my fuel at the servo.
guy no.1 " we no wat this is we've seen initial d"
guy 2. "yer nice 86 man"

i loled then left

Dave
8th January 2010, 06:21 PM
love the wheels they look sick on it, love the car also :)

domokun
10th January 2010, 09:46 PM
pics from jonzoku
http://teamobscurityracing.files.wordpress.com/2010/01/thez1110.jpg?w=655&h=376
http://teamobscurityracing.files.wordpress.com/2010/01/thez1111.jpg?w=655&h=376

xsoarerx
10th January 2010, 11:33 PM
low down pics :D john reinstalled johns coilovers


fixed for you ;) got it down to 6 hrs from stock to S13 gear with help from jason... not bad.

blog link - http://teamobscurityracing.wordpress.com/2010/01/09/zokusha-of-auszoku-the-mz11/

when you have some spare cash we will find some wheels :jdmsmile:

marvis
11th January 2010, 03:31 PM
Sorry I couldn't help guys, car was being troublesome.

focus_7
11th January 2010, 07:06 PM
heres a quote from wat 2 guys said to me wen i came out after paying for my fuel at the servo.
guy no.1 " we no wat this is we've seen initial d"
guy 2. "yer nice 86 man"

i loled then left

Asif people said this.

xsoarerx
11th January 2010, 07:18 PM
when i owned this it happened 4 time... it even happened on an ae86 cruise... ask drift pig, deleta etc...

you give people outside 80's toyota scene too much credit.

deal with it, it happened. :DD

domokun
11th January 2010, 08:01 PM
yer it happened i don't have the comical geniuses to come up with script like that :P

blair
11th January 2010, 09:51 PM
HA that happened to me a couple of weeks ago in my white T18!!


hahahaha cheers for the memory-laugh


OT: dig the car man, and yeh needs 10's :D

ae71
11th January 2010, 10:40 PM
HA that happened to me a couple of weeks ago in my white T18!!


thats a insult to 86s.... j/k t18 are a sick kunt bus.


needs a big drop tank and a 308 donk to go with those wheels


sorry maybe thats a bit harsh but it needs something like those brake boilers back on it, the challengers look arse.

domokun
12th January 2010, 05:31 PM
yer im not to fond on the wheels would much prefer somthing with a step dish instead of a suction offset.

joeschmo_57
14th January 2010, 07:18 AM
mk3's would be ideal.

especially 10's!

domokun
17th January 2010, 11:01 PM
stopped and got some pics while i tested the coilovers out round nebo
http://www.ae86drivingclub.com.au/dcimages/4/0/1/7/34531.jpg
http://www.ae86drivingclub.com.au/dcimages/4/0/1/7/34532.jpg

45KIDS
17th January 2010, 11:33 PM
Nice pic's. Seen this at qr Friday. Deffently need wheels when you can afford some.

Mighty.Soarer
21st June 2010, 01:55 PM
Love the wheels....how much $$ ya ?