PDA

View Full Version : slidekids 3tg t18 money pit



slidekid
26th January 2010, 11:41 AM
Hey guys been around for a while. this is my t18
engine specs are
self built 3tg hybrid
260 2tg head
double valve spring
reground cams unknown specs
ported head
reseated & reground valves
new valve stem seals
shaved head
all new gaskets
3tc block crank & rods
flycut 60 thou oversise 3tc pistons
fully ballanced bottom end
18rg sloex carbys
4 into 1 extractors
2.5 inch exhaust 1 muffler
electronic crane cams ignition

drive line specs
lightend flywheel
heavy duty clutch
t50
locked series 2 tseries

suspension wise
front ae86 coilovers
kyb shocks
whitline swaybars
superpro bushes
rear is just cut falcons but looking for new rear setup b4 new rego

let me know what u think regards slidekid :yeah:

86TRD
26th January 2010, 10:52 PM
i think it needs a wash haha , list sounds pretty good , with a set of wheels would look great.

Andy San
27th January 2010, 09:50 AM
Don't suppose you've got any pictures of the pistons, interested to see what you need to cut out to use them with the twincam head.

slidekid
30th January 2010, 10:54 AM
Don't suppose you've got any pictures of the pistons, interested to see what you need to cut out to use them with the twincam head.

i got the exhaust cut out the same as the intake
chris milton race engines did it cost 25 $
i used oversise mahle 3tc pistons witch were $ 185 new with rings & pins

Andy San
31st January 2010, 01:04 PM
shit that works out pretty cheap... do you know the final capacity with the overbore?

slidekid
31st January 2010, 03:10 PM
shit that works out pretty cheap... do you know the final capacity with the overbore?

at a guess close to 1950 or 2000

R&D Mechanical
31st January 2010, 05:20 PM
nice job dude havnt seen this car in ages from when you come to c1s with the webber on haha

still looks the same but the motor! looks good mate :)

slidekid
31st January 2010, 07:45 PM
nice job dude havnt seen this car in ages from when you come to c1s with the webber on haha

still looks the same but the motor! looks good mate :)

only just got rego again yesterday.
its been of the rd for a year and a bit i have a cressida daily now.
spent all day polishing & fixing it today & got about 50 ks of runing in done
i had it on the rd for a few days when i first built the motor &the cam gear come undone . and bent all my valves
then pulled themotor apart replaced all the valves & so far so good

Master__09
19th June 2011, 11:22 PM
Hey guys. Just an update, I now onw this car. Expect BIG THINGS at Mallala. That is all ;)

AJPS
20th June 2011, 02:51 AM
how much power is it making?

Master__09
27th June 2011, 10:03 PM
Untuned about 70rwkw. That's fuel too rich, carbs out of synch etc.

Picture of what the motor currently looks like.
http://www.ae86drivingclub.com.au/dcimages/520772.jpg

stouty
30th June 2011, 04:58 PM
looks pretty neat mate im making 106kw atw with my 3tg but it has a fair bit of work done to it bored out to 1960cc forged pistons rised compression 12:1 45mm webber wade cams. Would love to make 120 but think that is pretty impossible lol