doots' D7 pig

[doots]

this is my boy elroy
the intentions of the car are to be as offensive as possible. hills crowd is hard to please

Engine:
4kc
K50
ramflow + rocker cover oil breather

Suspension front:
aurora springs (smidge lower)
monroe shocks
new rack ends
new tie rods
super pro castor bushes
13x60x175 retreads

rear:
aurora springs
monroe shocks
17mm sway bar, nolathane bushes
13x165x60 pieces of squealing shit. leave big black lines though

interior:
gktech deep dish steering wheel
tacho dash
stripping the entire interior and stitch welding it all up

body:
flat front grill
t18 chrome bumper
fender mirrors missing 1 mirror (popped out while driving scared the shit out me)
rear bumper support only
putting on the wing properly (off a corona if you know what it is?)
13x6 jelly beans

Future holds:
performance hurricanes/challengers
rack spacers
s13 front end
low HARD springs
caster rods
panhard rod
get all the bushes done (ordering this weekend)

it will be kept 4wd spec for a few weeks till i get a decent supply of money in. (Y)

http://www.ae86drivingclub.com.au/dcimages/2/4/2/6/40038.jpg

http://www.ae86drivingclub.com.au/dcimages/2/4/2/6/40039.jpg

http://www.ae86drivingclub.com.au/dcimages/2/4/2/6/40040.jpg

http://www.ae86drivingclub.com.au/dcimages/2/4/2/6/40041.jpg
will post up pics when lcas are on and will probably roll guards and chop springs.

[svenmate]

Sounds good, mate. Good luck :)

[doots]

thanks mate

pics up and a quick up date

[R&D Mechanical]

Is this the one i see at hungrys in blackwood? it has mesh now?

[doots]

nah mate i'm from stirling area. doesnt have a grill at the moment but im picking one up monday night
also picking up a 17mm sway bar.
also cleaned it up a bit and i've put on a t18 chrome bumper

[doots]

http://www.ae86drivingclub.com.au/dcimages/2/4/2/6/549338.jpg

update its starting to look more and more road worthy.
also got my old steering wheel in.

organising an intermediate cruise for the hills next week if your interested just pm

[rolledup]

Keen to see the progress of this. Looks gd so far

[AJPS]

Offensive as possible?

I saw this in the hills the other weekend

[Hazzard]

Good to see that you have some plans for my old car :) If ya ever wanna sell it, got first dibs! already missing the old beast. Also, howd u mount the T18 bumper? I had quite a bit of trouble, but looks like u got it done easy :). will start a build thread on your old beast soon enough. Whens the cruise planned for man?

Hazzard

[Brendan]

love how ratty this thing looks :) i say spend money on going fast before looking good lol

[doots]

haha brendan thats definately the intentions.

hazzard i just bolted it straight in. i'll fix it later but im way to lazy to do that atm, cos its crooked and very obvious lol.

got a 17mm sway bar going in today, also chucked in a hektic ramflow + ramflow.

also putting in bushes for lca's, new rack ends and new tie rods (i'll put pictures of the old 1s up theyre rooted). will be hitting up ajps asap for rack spacers.

also got tyres fitted to my jellybeans so they go on the front when the wheels go back on.

pics soon it should look decent.

AJPS i think the proof is in the pudding. i usually get pretty dirty looks living around stirling area haha. i hope to get more.

[doots]

well, its been a long time since ive done an update on this and though i havent spent much money its safe to say it looks better now than it did.
all the plans are set out in the next months the following will happen
- xt130 lcas will finally go in rebushed and balljointed
- AJPS coilovers
- 6kg rear springs
- 4AGE conversion because i like doing things differently...
- buckets seats yo
- lots of welding including a sunroof delete. [if you want it 10 bucks]
- spray paint interior and finally finish exterior

also got 15x7 superlites on the front and had them on the rear as well but 4k struggled with skids off dirrt.

[ae71ness]

well in the last week i have bought the following:
xt130 coilovers with 8kg springs helper springs. also has nice big rotors and rebuild calipers
6kg rear ajps springs
ajps panhard
t3 camber tops
t3 castor rods
t3 knuckles and out tie rods
wuntun soup wheels 14x7
kelway strut bar

tomorrow i pick up front and rear whiteline swaybars and cusco underbrace.

also bought an ae71 just gotta get it up and running.

also have a deposit on a rebuilt 4age. ftw.

also have a fk off exhaust i was gonna put on but im thinking 2 inch with twin hotdog resinators.

not sure whether to put all the ae71 shit into the ke70 and continue with business as usual or whether to put it all in the ae71.

thoughts? its definately cleaner the ae71. will still strip it as bare as the ke70 and then put the interior in the ke70.

[ae71ness]

http://www.ae86drivingclub.com.au/dcimages/1/7/48187.jpg

wuntuns

http://www.ae86drivingclub.com.au/dcimages/5/5/0/4/48121.jpg

2.5inch to 3 inch straight through. could be over kill?

[skizzamods]

ae71 will save you heaps of hassles when putting the 4age in.
depends which is cleaner of the two.

[AJPS]

http://www.ae86drivingclub.com.au/dcimages/1/7/48187.jpg

wuntuns

http://www.ae86drivingclub.com.au/dcimages/5/5/0/4/48121.jpg

2.5inch to 3 inch straight through. could be over kill?

NO STRAIGHT PIPES ON STREET CARS!!!!

Other than that, its coming along well

[ae71ness]

ae71 is much much cleaner i think im going to keep that.

yer i reckon you could be right about the pipes i might have to go with resinators and a smaller width

[AJPS]

muffler for sure

4k/ac sound so fucked with exhausts

[Hazzard]

ill buy the ke off ya :) miss the old girl already...

[ae71ness]

haha when ive changed all the interior over ill let you know.
im going 4age ive decided not to fk around with the 4ac.

blew the carby last night doin a skid. shit lol.