PDA

View Full Version : A31Ev's Ceffy



a31Ev
21st March 2010, 01:43 PM
hi guys i bought my self a 1990 rb20e model ceffy about 4 1/2 months ago f and thought i should post her up this is my first car so the build is gonna be slow and it gonna be a learning experience. since i got it i havent worked on it much since i know dick all about cars so thanks to "daz" and (silentdrifter) its coming along nicely.:thumbup: i cant drive the car much since im only on my L's but the licence isnt far way haha.


work done so far:


manual conversion (MW)
front strut brace
new Hsd coilovers all round
Shimmed viscus
nardi deepcorn
new tie rods
rear strut brace* waiting to be put it
extra lock spacers added
drift button
steering shaft spacer

Hopeful plans:



adjustable Castor rods* done!
rear strut brace* done
my own rims that arnt borrowed from daz32
solid cradle bushes
rear camber arms( dont think its needed -3deg as it sits)
5 stud conversion( probably will never happen)
rb25de upgrade (same as above^ i can still dream)
late model tail lights
late model grille
mabey late model head lights mabey
respray down the track
there is more but i cant think of them


pics are on the way ;)
927992809281

a31Ev
25th June 2011, 03:58 PM
wow forgot i put this here,

well updates lots been done since this

so the car is now running rb25de ITB's are getting made in the next few weeks
also fitted
traction arms
rear camber arms
rear toe arms
tension rod
23mm rear sway
cradle bushes
spiltfire coils
have some extractors will be fitted when itbs are installed
getting exhaust made same time

for those wanting details on itbs im getting them done by JDM garage
i think he is going to blog it when it starts


running cheapo china wheels xxr 513 16x8 +0 till i buy some nice ones
planning on some horoshino inpul rear and some xr4's up front 15"

the interior is still bone stock apart from the nardi and screwdriver handle shifter i made
same as exterior not so pretty has a front lip a made from an old ca bar turned upside down
looks piggish not nice

i would have pics or ill try to get some but for now you will have to wait

cheers

Panda BVB700
26th June 2011, 10:29 PM
before i had red this properly i was looking at the motor and thinking damn thats a strange looking rb30 never seen an rb20 sohc before good to see more people going with itbs alswell, i like the sound of this little project, keep it posted and get some pics up once the itb's are on

a31Ev
24th August 2011, 09:52 PM
SOOOO updated

Ceffy is still down at jdm garage the itb's are getting the final welds done and are just about ready to be fitted and ready to tune I will post pics as soon as i get some from jdm garage, the rb25de i bought was only running on 4 cyl when i took it down to erin so got injectors clean and flowed and a det fuel pump so hoping i get some improvement. exhaust got done today and the extractors fitted, getting sr20det calipers fitted as the rb20e ceffy had the CA brakes and its just not good enough. after the work is done im looking for a set of Watanabe's 15" i want the same style as the strange drive r34 the new car classic. i want it to work but wont know till i try

its not looking the best.
2095520951

niclol
15th September 2011, 11:39 AM
Can't wait to see the ITB's! what sort of extractors are you running?

declan
21st September 2011, 11:21 PM
i love that you're going 15s, i love the you stayed NA and went ITB, i love that you're doing everything i would do to a ceffy.

here's a pic to keep you motivated

http://www.ae86drivingclub.com.au/dcimages/2/3/3/6/234355.jpg

a31Ev
28th December 2011, 08:14 PM
^^^ that this is awesome



so updates

car is still being built i went all out on the engine so the specs are
268degree cams 9mm lift valve springs to suit everything shimmed
shaved head to increase comp to 11.1
neo bottom end
head ported-portmatched and polished alot
itb's from rb26 made to fit and port matched to the neo head

also got a 2 way and planning on a autech rear and skirts

pics of exhaust and itb's being chopped
23617236182361923620

declan
30th December 2011, 11:27 AM
i get so excited when this thread gets updated

estimated power figures man?

joeschmo_57
31st December 2011, 09:30 PM
i wanna see the itbsssssss

a31Ev
2nd January 2012, 10:01 PM
me too still waiting on the head to go back together the springs we got are not going to be enough so had to order some others
so still waiting for that. i just want to hear this run its going to sound insane

a31Ev
26th May 2016, 11:28 PM
reviving my dead thread the car is running the RB25DE with ITB's it sat in a shed for many moons but has come back to life and has been tuned and runs once again so she can be ready for sale.
new update spec list here
- autech kit, skirts, front and rear bar
- d max roof lip
- d max boot lip
- vented bonnet ( not sure on the make ) ( not fitted at the moment still has standard on )
- wantanabe 15x8 front 16x9 rear ( i think, i have to check )
- s13 sr20det front brakes
- r33 rear brakes
- Nismo 2 way ( rebuilt 3 way adjustable one )
- PBM (part shop max) adjustable toe rod, traction rod, camber arms rear.
- HSD coil overs 8-10kg
- PBM (part shop max) subframe collars
- basic rear strut brace
- ultra racing front strut brace
- bolt in cusco cage fit a31 c33 ( sand blasted and repainted )
- ikeya formula tierods
- tie rod ends KTS
- modified crossmember for rack to be moved forward for the knuckles
- Custom knuckles ( purchased from JDM garage )
- rack spacers
- braided brake lines
- urethane rack bushing
- white line rear sway bar uprated
- urethane sway bar bushings
- gtr front driver and passenger seats
- nardi classic
- defi gauges, vacuum, oil temp, Water temp.


Engine, trans


- head has massive porting as big as we could take it both inlet and exhaust have pictures of the porting
- HKS step 2 RB26 cams as big as we could fit without grinding the head for more space.
- uprated valve springs
- adjustable cam gears
- bosch 250 fuel pump
- custom made RB26 throttle bodies ( engineered for correct length and tuning)
- vacuum block
- r33 radiator
- alloy swirl pot
- HPC coated custom fabricated extractors
- full stainless custom fabricated and tucked 2.5" exhaust
- titanium exhaust tip
- exedy Heavy Duty clutch ( racing variant i think i can't remember )
- running on a link g3+ with adapter plug and play.


it is currently tuned by godzilla motorsport conservatively at 164whp i have the printout in the car will upload if you want to see but numbers are numbers.
https://youtu.be/ZtMrv0V3mEQ
the video is old! before i bought the link g3+ and cleaned up the engine bay and wiring. i don't have any pictures of the body yet but will upload soon.