View Full Version : Seans Keto
E7 PIG
1st May 2010, 09:01 AM
ok so im been lazy and decided its time to start my own build and show you guys what ive been up to .:cool:
not sure on the setup im looking for but just going with the flow of a street/drifter.
Specs:
Engine:
- 4k with rebuilt head
-oil cooler ,braided hoses , earls fittings.
-new coil
-new dizzy cap
-new water pump
-new themostat
-eagle spark plug leads
-new spark plugs
Driveline:
Driveline:
-stock 4sp box
-t50 gearbox (not fitted)
-exedy hd clutch (not fitted)
Suspension - Brakes:
Front:
- ae86 tein coilovers 8kg springs+helper spring , 1-16 damper
-jdm ae86 slotted rotors and cailpers
-tein camber tops
-cusco adj caster rod brace
-cusco adj caster rods and brackets
-uknown brand front strut brace
-unknown RCA's
Rear:
-whiteline pan hard rod
-tercel 17mm rear sway bar with new bush's.
-custom made rear strut brace
-falcon cut springs
Body:
- ke70 flat front guards
- t18 chrome rear bar ( not fitted )
- quad lights . thanks Aaron from shakotan garage
- ke70 fender mirrors .
- hotwire rims with brand new Tires
-ajps windscreen banner . thanks to ajps
-heaps of stickers lol
-hang ring.
-2' straight through exhaust with sports muffler
-Set of hurricanes 14x8 - 10 offset i think
Interior:
-nardi leather wheel + nardi horn
-dildo shift knob
-cd player lol
-stickers
Future plans:
-engine transplant ( 4age or a beams )
-dished rims
-flare rear guards
-full respray
-Bride bucket seats
-harness
-gauges
-welded diff
-bigger front sway bar
-ajps lock spacer
-t18 chrome front bar
+ more.
My inspiration :DD
http://img17.imageshack.us/img17/9572/1419115.jpg (http://img17.imageshack.us/i/1419115.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
so heres it when i got it and some changes happening.
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/43008.jpg (http://img341.imageshack.us/i/dsc03074g.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img101.imageshack.us/img101/447/dsc03071e.jpg (http://img101.imageshack.us/i/dsc03071e.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img707.imageshack.us/img707/6114/dsc03077l.jpg (http://img707.imageshack.us/i/dsc03077l.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img11.imageshack.us/img11/3405/dsc03080k.jpg (http://img11.imageshack.us/i/dsc03080k.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img192.imageshack.us/img192/1161/dsc03081it.jpg (http://img192.imageshack.us/i/dsc03081it.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/43013.jpg (http://img683.imageshack.us/i/dsc03083a.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/43014.jpg (http://img683.imageshack.us/i/img9073j.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img140.imageshack.us/img140/553/dsc03164ri.jpg (http://img140.imageshack.us/i/dsc03164ri.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/43016.jpg (http://img526.imageshack.us/i/img9083g.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img85.imageshack.us/img85/2980/dsc03185n.jpg (http://img85.imageshack.us/i/dsc03185n.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img227.imageshack.us/img227/5092/dsc03186g.jpg (http://img227.imageshack.us/i/dsc03186g.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img87.imageshack.us/img87/4203/dsc03188f.jpg (http://img87.imageshack.us/i/dsc03188f.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img132.imageshack.us/img132/3719/dsc03178u.jpg (http://img132.imageshack.us/i/dsc03178u.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
guards all finished need to start on bonnet.
http://img208.imageshack.us/img208/9403/dsc03196x.jpg (http://img208.imageshack.us/i/dsc03196x.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/43022.jpg (http://img189.imageshack.us/i/dsc03195j.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img23.imageshack.us/img23/9954/dsc03204y.jpg (http://img23.imageshack.us/i/dsc03204y.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
E7 PIG
1st May 2010, 09:50 AM
*Edited
R&D Mechanical
1st May 2010, 12:03 PM
Loooks good dude! what fender mirrors are they? 2nd type of ebay? keep it up :)
trikzlane
1st May 2010, 12:22 PM
looks good, am a fan of the exhaust tips
E7 PIG
1st May 2010, 12:35 PM
Loooks good dude! what fender mirrors are they? 2nd type of ebay? keep it up :)
cheers guys , yea there off ebay so not sure lol.
E7 PIG
1st May 2010, 12:36 PM
looks good, am a fan of the exhaust tips
cheers i took them off as im on my L's lol loud as fark
E7 PIG
1st May 2010, 01:19 PM
Update: Got my AJPS banner on today . Note: peeping pedo bear lol
http://img18.imageshack.us/img18/7471/dsc03208v.jpg (http://img18.imageshack.us/i/dsc03208v.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/43029.jpg (http://img191.imageshack.us/i/dsc03207o.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
squish_m8
1st May 2010, 01:55 PM
love the work, looking good!
E7 PIG
1st May 2010, 02:09 PM
love the work, looking good!
thanks for the comments will update more soon , currently working of my bonnet
pen15
3rd May 2010, 05:40 PM
i like this car good work keep up the good work
E7 PIG
3rd May 2010, 06:25 PM
i like this car good work keep up the good work
cheers almost finish my bonnet , gotta bog it tomorrow if its a good day .
Quick Update too: Stickers
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/43157.jpg (http://img683.imageshack.us/i/dsc03209x.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
keimeier
3rd May 2010, 07:13 PM
haha yes stickers look mad. jdm sticker pack ftw
E7 PIG
3rd May 2010, 07:45 PM
haha yes stickers look mad. jdm sticker pack ftw
yea haha too bad i ran out tho had to chuck on some random ones lol like red herring and shit like that.
marvis
7th May 2010, 12:12 PM
Clean base, good plans.
But that exhaust doesn't do it any justice, straight out would have been better, and that hangring shouldn't be on the outside.. It's not cool, and you just look like an idiot for those who knows whats up. Chuck it on the inside.
Don't do a 1j, 4age is a proven win. :)
Clinton
7th May 2010, 12:16 PM
this is zoku as bro!
E7 PIG
7th May 2010, 02:04 PM
Clean base, good plans.
But that exhaust doesn't do it any justice, straight out would have been better, and that hangring shouldn't be on the outside.. It's not cool, and you just look like an idiot for those who knows whats up. Chuck it on the inside.
Don't do a 1j, 4age is a proven win. :)
got more hang rings coming so they will be going on inside , the only reason i wann go 1j cause its something different , theres too many 4age's out the in keto's .
i always like to do shit different instead of going with shit that people like all the time , its my car i dont really care if you or anyone else doesnt like it , everyone has different tastes.
marvis
7th May 2010, 02:08 PM
Your doing it wrong.
E7 PIG
7th May 2010, 02:10 PM
Your doing it wrong.
cool man :D
marvis
7th May 2010, 02:17 PM
Stop and think about it.
You got a ke70, that's not very different to begin with. You want to put a 1j in it to be "different" but everyone is throwing 1j's in everything anyway... It will be fail, look at the dudes in japan, you don't see them rocking 1j's in E&/AE86. I'm sure if it was better they would do it.
4age is win, if you want more power rock a 20v or a beams. 1j is 140KG + over a 4age, where 3sge is 40 (inc W58).. That would feel awesome having that much extra weight hanging over the front of an originally 850kg car.
Maybe if your car looked like this it could rock a hangring, but it's heaps ADM and not lowdown. Stop trying to look cool, you look like an try hard idot rocking hangrings on this to people who know anything about them.
Good work signing up to auszoku asking for one too. We love it when kids do that.
http://www.ae86drivingclub.com.au/dcimages/5/2/9/43467.jpg
E7 PIG
7th May 2010, 02:21 PM
cool man glad you took the time to find that lol 20 v sounds good tho
marvis
7th May 2010, 02:23 PM
Find what? I have many KE70 pictures, if that's what you are talking about..
Ah I see you are reasonably new to the site...
20V in a KE70 is a winner, and won't cost nearly as much as a 1jz or 3sge Beams.
E7 PIG
7th May 2010, 02:26 PM
Look ok dont wanna have my build thread covered in bs talk , lets just stop here .
ok yes i know i dont know alot about KE/AE's and there styling and all that but im here to learn .
marvis
7th May 2010, 02:38 PM
Pay attention then.
BTW, un-cracked dash?? WIN!
E7 PIG
7th May 2010, 02:39 PM
yea got a new one from the wreakers , cause it was cracked from previous owner and he painted it black <----rofl
blake.
8th May 2010, 09:23 AM
i like this, your rear strutbrace is cool to, might copy :)
needs to be lower with some negative camber, also on the hotwires you can polish the tops of the wires and leave the inner bit black, i did this and looks alright,
marvis wasn't having a go at you ethier, he's knows heaps bout styling cars, just look at some of his built threats, your guaranteed to cream over them.
E7 PIG
8th May 2010, 09:26 AM
i like this, your rear strutbrace is cool to, might copy :)
needs to be lower with some negative camber, also on the hotwires you can polish the tops of the wires and leave the inner bit black, i did this and looks alright,
marvis wasn't having a go at you ethier, he's knows heaps bout styling cars, just look at some of his built threats, your guaranteed to cream over them.
with the strut brace i just used and old panhard rod from the wreakers , i just cut a welded shit lol .
yea it will be getthing camber as soon as my coilovers come .
blake.
8th May 2010, 10:01 AM
i definanty will be copying that then :) sounds easy and i already have the panhard to do it!
get some corona lca's aswell, cos my coilovers (tein tops) don't give me enough neg camber, not sure about yours tho.
E7 PIG
8th May 2010, 10:25 AM
yea pretty easy to do , just takes time lol
yea im not sure lol have to wait and see.
belstaff
11th May 2010, 11:59 PM
Good work signing up to auszoku asking for one too. We love it when kids do that.
http://www.ae86drivingclub.com.au/dcimages/5/2/9/43467.jpg
An interesting clipping from a magazine.
Say and do you have similar photos here about this car: KE70 Drift (http://www.youtube.com/watch?v=ZRHLOVT2YgI) or Really Nice AE70 (with Nomura Ken) (http://www.youtube.com/watch?v=X0iNhq4TD8I&feature=related)
It has long been looking specification for this KE70
Beau
12th May 2010, 12:16 AM
Good stuff, always like to see young guys doing stuff themselves and getting their hands dirty. You are doing a good job.
However, i do agree here with Marvis even if he has a super rude and crude way of trying to help you out here brother. (you know your alright in Uncle Beaus Book Marv) i like the fact that you want to be different with this build always a important thing to do when building your car, building a car is art, its away of expressing yourself with out looking like a art fag. However doing things just because 'noone has done it' usually leads to heart break.
Putting a Beams in a KE is still quite different in Australia, even though it has done does not mean its a popular mod, there are a few great options you could go with that could be a slight bit different from the 4age but still be a kick ass platform and not put your car in between a rock and hard place and handle like one.
if you are only on your L's i wouldnt stress too much about engines and so on (i know you are Keen) however concentrate on driving skills and getting your P's and in the mean time or afterwards start looking at the suspension set up and how you can better it. This will make you a better driver and you will learn a tonne about yourself and the car. Trust me - sounds far fetched but its true.
fuck i sound like Dr Phil. But just hate to see ya make a decision and regret it and then just leave the seen cause of bad tastes! - and just a heads up, watch out for overspray on those stickers on your bonnet!
Keep it real!
E7 PIG
12th May 2010, 09:47 AM
Good stuff, always like to see young guys doing stuff themselves and getting their hands dirty. You are doing a good job.
However, i do agree here with Marvis even if he has a super rude and crude way of trying to help you out here brother. (you know your alright in Uncle Beaus Book Marv) i like the fact that you want to be different with this build always a important thing to do when building your car, building a car is art, its away of expressing yourself with out looking like a art fag. However doing things just because 'noone has done it' usually leads to heart break.
Putting a Beams in a KE is still quite different in Australia, even though it has done does not mean its a popular mod, there are a few great options you could go with that could be a slight bit different from the 4age but still be a kick ass platform and not put your car in between a rock and hard place and handle like one.
if you are only on your L's i wouldnt stress too much about engines and so on (i know you are Keen) however concentrate on driving skills and getting your P's and in the mean time or afterwards start looking at the suspension set up and how you can better it. This will make you a better driver and you will learn a tonne about yourself and the car. Trust me - sounds far fetched but its true.
fuck i sound like Dr Phil. But just hate to see ya make a decision and regret it and then just leave the seen cause of bad tastes! - and just a heads up, watch out for overspray on those stickers on your bonnet!
Keep it real!
cheers beau , yea engine transplant is last on the list i dont have a job some no money for an engine lol .
oh and for the stickers on the bonnet its already been spayed before i put them on so i dont need to be worried about over spray.
oh im not that young either lol i mean 19 is kinda young but yea not as young as 16 lol. but cheers for the comments and help :D
CoR*
12th May 2010, 07:40 PM
Sr20 it rofl
E7 PIG
14th May 2010, 12:41 PM
UpDate : Tien coilovers came today :D
http://img80.imageshack.us/img80/1379/dsc03219y.jpg (http://img80.imageshack.us/i/dsc03219y.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
heres a photo of how she sits atm.
http://img140.imageshack.us/img140/3741/dsc03217g.jpg (http://img140.imageshack.us/i/dsc03217g.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
AJPS
19th May 2010, 10:30 PM
where did the teins come from?
shift_rook
19th May 2010, 10:39 PM
looks good man, definately start with a 4age though, if you want more, put a 1j afterwards, though it will handle like poo, keep it up
E7 PIG
20th May 2010, 09:22 AM
where did the teins come from?
off here lol , took ages to get here so much weight , got rotors and calipers with them .
need some 86 steering knuckles so i can chuck these in .
AJPS
20th May 2010, 05:38 PM
ive got knuckles pm me
E7 PIG
20th May 2010, 09:06 PM
after stock used ones or maybe ps ones , theres some on ebay i might get.
E7 PIG
21st May 2010, 07:30 PM
Update: managed to convince my brother to let me have the caster rod brace i got him since im not going up to SA anymore .:DD
BIG SCORE!!!!!!
Looks pretty good with cusco parts
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/44412.jpg (http://img191.imageshack.us/i/dsc032231.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
got bored one afternoon and just chucked on my whiteline panhard rod on.
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/44413.jpg (http://img341.imageshack.us/i/dsc032281.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
AJPS
21st May 2010, 08:32 PM
looks nice man!!!
E7 PIG
21st May 2010, 08:46 PM
looks nice man!!!
cheers , booking my P test on monday so hopefully i pass this time so i can enjoying driving this on my own.
marvis
25th May 2010, 04:19 PM
I would recommend RCA's, lock spacer and PS arms :)
Good progress.
45KIDS
25th May 2010, 05:23 PM
i like the way this is heading :)
just build a tough 4age. deffently be enough power!
E7 PIG
25th May 2010, 08:53 PM
cheers and yes 4age will be going in when money comes in lol
E7 PIG
25th May 2010, 08:54 PM
I would recommend RCA's, lock spacer and PS arms :)
Good progress.
got RCA's , will get lock spacer and ps arms when i get money
E7 PIG
3rd June 2010, 06:29 PM
not really an update but got my licence today so will get photos asap!!
svenmate
3rd June 2010, 07:25 PM
Yew! The freedom of P's :)
Sounds like a good plan, man. Keep it up!
E7 PIG
3rd June 2010, 07:57 PM
yea man sure does feel good :D
E7 PIG
6th June 2010, 07:08 PM
Update: heres some photos of when i went out the bush with some friends and done some skids ( fail for me cause im a noob lol ) soo muddy .
http://img696.imageshack.us/img696/887/dsc03688l.jpg (http://img696.imageshack.us/i/dsc03688l.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/45793.jpg (http://img228.imageshack.us/i/dsc03689.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/45794.jpg (http://img251.imageshack.us/i/dsc036831.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
looks hell 4x4 spec here lol
http://img268.imageshack.us/img268/9049/dsc03696qn.jpg (http://img268.imageshack.us/i/dsc03696qn.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
Jdm-Mcc
6th June 2010, 07:14 PM
FUCK YES! looks like fun mate :) go the stanza!
E7 PIG
6th June 2010, 07:25 PM
yea it was till this morning when i had to was all the hard mud off lol and noticed i bent my beaver panel when i ended in a ditch kinda :P
the stanza has more touque then this shit 4k its does 3 gear skids in the dry lol ( only cause it had so much body roll )
Jdm-Mcc
6th June 2010, 07:36 PM
hahaha nissan powa! has the stanza got just an l16?
soo need a camping/bash car that is registered
E7 PIG
6th June 2010, 07:55 PM
ummm dunno just the stock carbie engine is all i know it has .
yea good idea but doesnt need to be rego'd cause noones around where we do it.
logan_7
8th June 2010, 03:14 AM
its myn and coreys stanza and has l20b in it
E7 PIG
8th June 2010, 09:49 AM
yes logan , i didnt say it was my car lol
logan_7
8th June 2010, 05:54 PM
i know i was just saying that and you should email me the vid and photos :p
E7 PIG
8th June 2010, 06:50 PM
haha aiight dick lol
E7 PIG
8th June 2010, 06:52 PM
Update: swapped my sub for a pair of centerlines with tires :D loves them.
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/45907.jpg (http://img198.imageshack.us/i/dsc03734g.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
keimeier
8th June 2010, 11:56 PM
well worth it! looking good dude
E7 PIG
9th June 2010, 11:04 AM
yea i know pretty much over listening to music while driving so i didnt mind .
marvis
15th June 2010, 02:04 PM
Looking better man.
I think black mirrors will help also.
14 x 7 0 brake cookers?
Jdm-Mcc
15th June 2010, 02:52 PM
^^ what he said, black wheels on white 80's toyota is the goods
E7 PIG
15th June 2010, 08:01 PM
nah dont need black mirrors cause cars almost ready to be change to quad lights with fender mirrors.
E7 PIG
15th June 2010, 08:02 PM
Looking better man.
I think black mirrors will help also.
14 x 7 0 brake cookers?
oh dont know what size lol
Zach
15th June 2010, 08:12 PM
Looking good man :D
E7 PIG
15th June 2010, 08:13 PM
cheers should have some photos during the week with the conversion underway .
Zach
15th June 2010, 08:21 PM
sweet.
E7 PIG
22nd June 2010, 08:38 PM
so the conversion begins.
http://img27.imageshack.us/img27/3694/dsc03919u.jpg (http://img27.imageshack.us/i/dsc03919u.jpg/)
more photos tomorrow when i get the tein coilovers in.
E7 PIG
23rd June 2010, 07:43 PM
Progress Pics.
http://img43.imageshack.us/img43/1451/dsc03922q.jpg (http://img43.imageshack.us/i/dsc03922q.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
E7 PIG
23rd June 2010, 08:07 PM
mods can you please change my build title to " Seans Keto; "
E7 PIG
29th June 2010, 08:56 AM
took me a week but i got it done lol :P
http://img85.imageshack.us/img85/5884/dsc03950o.jpg (http://img85.imageshack.us/i/dsc03950o.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img205.imageshack.us/img205/904/dsc03956f.jpg (http://img205.imageshack.us/i/dsc03956f.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img63.imageshack.us/img63/7007/dsc03963v.jpg (http://img63.imageshack.us/i/dsc03963v.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/47622.jpg (http://img193.imageshack.us/i/dsc03962xc.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/47623.jpg (http://img706.imageshack.us/i/dsc03923no.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img85.imageshack.us/img85/7609/dsc03925t.jpg (http://img85.imageshack.us/i/dsc03925t.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
Jdm-Mcc
29th June 2010, 11:14 AM
Thats a fair old update! looks awesome man well done!
E7 PIG
29th June 2010, 01:38 PM
cheers :)
another update rolling and flaring rear guards with a hammer lol
Jdm-Mcc
29th June 2010, 01:42 PM
looking foward to seeing the update! got a matching set of hurricanes or just a pair?
E7 PIG
29th June 2010, 03:58 PM
yea looks fail i must admit but doesnt matter as im going to cut them out cause there full of rust , yea ive got a set of hurricanes
SA_kesev
29th June 2010, 09:56 PM
Your quads dont look like their sitting properly, but other than that, it look loads better and those front guard look flared and cut really good.
E7 PIG
30th June 2010, 10:00 AM
yea ive been having trouble getting them right , i dont know why , but any way should be able to fix it when its going in to get painted ( when i have money :P )
marvis
30th June 2010, 11:35 AM
That's a big oil cooler for a 4kc.
Low Style
30th June 2010, 12:46 PM
mods can you please change my build title to " Seans Keto; "
done :)
E7 PIG
30th June 2010, 02:52 PM
done :)
cheers :)
That's a big oil cooler for a 4kc.
haha yea true :P
marvis
30th June 2010, 03:46 PM
Would make it run worse I would think..
E7 PIG
30th June 2010, 04:04 PM
nah runs fine , really helps with the oil temps tho
marvis
30th June 2010, 04:14 PM
Oil temps wouldn't get high enough on a 4k to use it? If it has no thermostat it could be making the oil run too cool.
Pidgey
30th June 2010, 04:19 PM
Unless you are valve bouncing it like every sensible 4K-equiped car owner should....
lol.
E7 PIG
30th June 2010, 07:40 PM
yea ive been hitting the bush like every saturday in it but all shall end soon when i get it painted
joeschmo_57
30th June 2010, 10:42 PM
some serious hate from marv.
but he is right, and hes doing because he cares.
last update looks boss!
what colour will it be sprayed (i may have missed it)
E7 PIG
1st July 2010, 09:22 AM
http://ll.speedhunters.com/u/f/eagames/NFS/speedhunters.com/Images/Dino%20Dalle%20Carbonare/ECSN-09-NEWOLD/bb1.jpg
this is the colour.
joeschmo_57
1st July 2010, 10:48 AM
fuck. once that is sprayed there will be no hitting trees. that is a nice colour!!!!!
cannot wait to see it finished.
chrome bimpers or no chrome bumpers?
E7 PIG
1st July 2010, 11:16 AM
chrome bars bro , either t18 one's or the proper ke ones .
Low Style
1st July 2010, 12:31 PM
Like!
E7 PIG
1st July 2010, 10:57 PM
went for a cruise with some friends thought i would chuck up some pics .
http://img163.imageshack.us/img163/4038/dsc03969fu.jpg (http://img163.imageshack.us/i/dsc03969fu.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/47873.jpg (http://img692.imageshack.us/i/dsc03973p.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img709.imageshack.us/img709/8698/dsc03979iu.jpg (http://img709.imageshack.us/i/dsc03979iu.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
Prewer
2nd July 2010, 09:44 AM
Coming along nicely there
what have you done with your centrelines?
E7 PIG
2nd July 2010, 10:02 AM
gave them to my friend with the ae71 wagon in the pic.
E7 PIG
2nd August 2010, 10:48 PM
sad news :( sold they ke , now a owner of a toyota soarer.
marvis
3rd August 2010, 11:53 AM
LOL.
Pics
E7 PIG
4th August 2010, 11:05 AM
will get some soon .
stahlz_ae86
4th August 2010, 09:55 PM
MZ10 or ban
E7 PIG
5th August 2010, 09:40 AM
nah its a Uzz31 :P
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/50301.jpg (http://img571.imageshack.us/i/dsc04801w.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img340.imageshack.us/img340/3240/dsc04798m.jpg (http://img340.imageshack.us/i/dsc04798m.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/50303.jpg (http://img825.imageshack.us/i/dsc04811.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://www.ae86drivingclub.com.au/dcimages/4/4/4/7/50304.jpg (http://img716.imageshack.us/i/dsc04805i.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img412.imageshack.us/img412/271/dsc04806q.jpg (http://img412.imageshack.us/i/dsc04806q.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img696.imageshack.us/img696/6978/dsc04808t.jpg (http://img696.imageshack.us/i/dsc04808t.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img809.imageshack.us/img809/2845/dsc04815g.jpg (http://img809.imageshack.us/i/dsc04815g.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
squish_m8
5th August 2010, 10:35 AM
nice 1J :P
E7 PIG
5th August 2010, 11:04 AM
yea sorry put wrong letter.
-ollie-
5th August 2010, 03:28 PM
Shouldn't it be a UZZ30 then?? There is no 1jzzzzzz in that bad boy!
E7 PIG
5th August 2010, 04:12 PM
yea haha sorry my mistake haha its a uzz31
Ke70alex
5th August 2010, 06:34 PM
this thing must handle fukn great!
E7 PIG
6th August 2010, 09:10 AM
if its the rolla then yes , but if its the soarer then fuck no so much body roll its scary :P
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.