KE70xris
3rd December 2010, 01:01 PM
Blew my old KE70's engine up so i bought this new one. comp tested it before buying to make sure it was ok pulled 170,170,170,170 :)
Had some rear damage when i bought it and came with a spare rear qtr and was pretty much stock (wouldnt start with a key and looked to have been left outside for at least a year in the dandenongs)
14789
So first thing i did was clean the crap out of it and remove the million leaves that were in all the cracks.
We then replaced the rear qtr and ive fixed all the wiring issues (stripped my old ke and swapped looms and all plugs across) I then stripped the extractors, exhaust, front lower control arms, knuckles, steering arms, suspension and swapped it over, we put in some Peugot rear struts and AU ford rear springs (fronts are corona struts, brakes, lca's). This time i wrapped the extractors in heat wrap to try and seperate alittle heat from the intake (as it sits on the extractors. Purchased some new fender mirrors and some Work 14x6.5 +20? wheels fitted some 165/65/14's to them and had my brother modify the guards to fit them.
14787
14786
14788
You might notice that the front end has alot of camber :) well we run Primal Garage and at Primal we like to do things ourselves so we modded up the lca to be 43mm longer, lengthened the steering arms 40mm, and modified the corona knuckles for more lock. So now i have so much lock its rediculas to drift with. before i could only hold a shallow drift before hitting the limits of lock now i can easily pull off 90degree slides, the car is now so much fun to drive.
Heres a pic of the old engine bay
14790
List of Mods
4kc 1299cc
Modified Airbox
Pacemaker extractors (heat wrapped)
2 1/4" exhaust
New NGK plugs
new leads
15degrees timing
Modified Corona LCA
Modified Corona Knuckles
Corona front struts with chopped springs
Munroe Peugot Shocks
Ford AU Springs (chopped)
Primal front strut brace
Locked Diff
Work ??? 14x6.5 +?? front 165/65/14
Eagle Racing 14x6 +10 rear 175/65/14
Fender Mirrors
Bride Zeta with custom Primal rail
OMP Dished wheel
300mm Dildo gearknob
On order
AJPS Madhouse Chin Spoiler
Soon to be resprayed
Looking for some 14x8 -/0 ~ wheels for the back so it sits flush. going to purchase a 20mm bolt on spacer for the time so it doesnt look so aids..
http://www.ae86drivingclub.com.au/forums/digitalvb/morbid_black/misc/pencil.png
Had some rear damage when i bought it and came with a spare rear qtr and was pretty much stock (wouldnt start with a key and looked to have been left outside for at least a year in the dandenongs)
14789
So first thing i did was clean the crap out of it and remove the million leaves that were in all the cracks.
We then replaced the rear qtr and ive fixed all the wiring issues (stripped my old ke and swapped looms and all plugs across) I then stripped the extractors, exhaust, front lower control arms, knuckles, steering arms, suspension and swapped it over, we put in some Peugot rear struts and AU ford rear springs (fronts are corona struts, brakes, lca's). This time i wrapped the extractors in heat wrap to try and seperate alittle heat from the intake (as it sits on the extractors. Purchased some new fender mirrors and some Work 14x6.5 +20? wheels fitted some 165/65/14's to them and had my brother modify the guards to fit them.
14787
14786
14788
You might notice that the front end has alot of camber :) well we run Primal Garage and at Primal we like to do things ourselves so we modded up the lca to be 43mm longer, lengthened the steering arms 40mm, and modified the corona knuckles for more lock. So now i have so much lock its rediculas to drift with. before i could only hold a shallow drift before hitting the limits of lock now i can easily pull off 90degree slides, the car is now so much fun to drive.
Heres a pic of the old engine bay
14790
List of Mods
4kc 1299cc
Modified Airbox
Pacemaker extractors (heat wrapped)
2 1/4" exhaust
New NGK plugs
new leads
15degrees timing
Modified Corona LCA
Modified Corona Knuckles
Corona front struts with chopped springs
Munroe Peugot Shocks
Ford AU Springs (chopped)
Primal front strut brace
Locked Diff
Work ??? 14x6.5 +?? front 165/65/14
Eagle Racing 14x6 +10 rear 175/65/14
Fender Mirrors
Bride Zeta with custom Primal rail
OMP Dished wheel
300mm Dildo gearknob
On order
AJPS Madhouse Chin Spoiler
Soon to be resprayed
Looking for some 14x8 -/0 ~ wheels for the back so it sits flush. going to purchase a 20mm bolt on spacer for the time so it doesnt look so aids..
http://www.ae86drivingclub.com.au/forums/digitalvb/morbid_black/misc/pencil.png