View Full Version : Another Container Due in Early MARCH 2011
44GTE
14th December 2010, 12:32 AM
Hi All
Just an update on whats happening
I have another container due to land in Early March 2011 at this stage if all goes well.
Have all sorts of stuff again in this
1 Zenki complete Coupe car
1 Kouki Hatch for myself for abit of track work hpefully
1 Kouki Hatch full cut
Various other stuff including as follows
This is just a very quick list of things, will get a moe detailed list added shortly
Kouki Levin front bars / lips / mounts
Kouki trueno Front bars
Levin Bonnets
Levin front guards
Doors
Hatches
Front and rear spoilers
Seats
Trim
Various wheels
JDM EFI tanks
Trueno Headlights
LEVIN Kouki headlights
Whiteline Tail Light sets
Redline Tail Light sets
Tailshaft
Struts
Hubs / rotors
Calipers
Roll cages ( full 7 point)
Gearboxes
Looms
1 or 2 front Cuts and the rear wrecked out
Rear Quarters
Roof Pannel ( Non Sunroof)
Rear Bar Kouki
Side skirts and caps
Factory GTV Standrad steering wheels
PWR Steer setups
Mirrors
Lotus type tail lights
Will add more as i remember
If you are looking for a body kit of FRP / Carbon bonnet let us know asap as i have room and can give you an estimated delivery price
Cheers all :))
McLEVIN
14th December 2010, 08:35 AM
sweet dude will be keen on a few things
PRIMRK
14th December 2010, 10:30 AM
whats the std GTV wheel going for? PM me price as i know i wont remember to check here...
EDIT: Also do you have any of the levin indicators, the ones that wrap around (i dunno if all JDM ones do this)
zacnsw
14th December 2010, 11:36 AM
that keen on the coupe. can u pm me the price and details if u have them yet? is it a levin or trueno?
topher
14th December 2010, 07:01 PM
any chance of a Zenki front bar???
joeschmo_57
15th December 2010, 12:13 AM
will any of the cars be complianced? i could be verrrrrrrrrrrrry very interested.
also 2010 is almost past. do you mean 2011?
cheers \
joe
civa
15th December 2010, 01:04 PM
pm sent craig
cheers
sotiros86
16th December 2010, 11:00 AM
Interested in an FRP/carbon trueno bonnet. Either standard style or drop vent, i dont mind.
Let me know the price.
Cheers,
Andrew
44GTE
16th December 2010, 08:27 PM
Interested in an FRP/carbon trueno bonnet. Either standard style or drop vent, i dont mind.
Let me know the price.
Cheers,
Andrew
Hi Andrew
New would be around $1250 delivered to Syd
Cheers
MarmO.
16th December 2010, 09:05 PM
Hi I'm after a second hand levin carbon bonnet, how much am i looking at?
44GTE
16th December 2010, 11:24 PM
Hi I'm after a second hand levin carbon bonnet, how much am i looking at?
Hi
I don't have any coming at this stage, but would be looking at $550 and up depending on condition. New arouns $1000
Cheers
vivioman
18th December 2010, 01:59 PM
Any JDM front seats and quote with freight to WA 6069 pls.
Thanks
B1FF_86
19th December 2010, 06:39 PM
any 15x10 wheels?
Y-B-NRVS
22nd December 2010, 06:07 PM
hey mate im after a few things prices on levin bonnet front guards & doors all 2nd hand & im interested in how much you want for that 7 point roll cage & do the bars go through the dash before they bolt to the floor or they miss the dash?
cheers rod
meadan
26th December 2010, 10:20 AM
Hi,
I will be after one of those cheap j-blood copy front bars off yahoo japan. Or even the whole kit depending on price.
n2866
26th December 2010, 10:46 AM
hey man how much for a rwd 16v loom?
Tbo92
20th January 2011, 12:01 PM
pm sent
sidewayz_simon
21st January 2011, 01:52 AM
I need a trueno badge for my coupe. The one that goes on the front bumper. If you have/can get one that'd be awesome :)
44GTE
21st January 2011, 07:29 AM
I need a trueno badge for my coupe. The one that goes on the front bumper. If you have/can get one that'd be awesome :)
Hi
Have on currently in stock.
Will get price for you
Cheers
Tbo92
21st January 2011, 04:28 PM
hi im looking for fiberglass trueno front guards + 30 and rear flares +35
cheers
44GTE
21st January 2011, 07:32 PM
hi im looking for fiberglass trueno front guards + 30 and rear flares +35
cheers
Hi
Have some FRP Trueno guards in stock now, not sure on size also have some rear quarter with the wedge style look in stock also
Will find out what they are
cheers
Tbo92
25th January 2011, 05:45 PM
cheers, any luck with them???
n2866
25th January 2011, 08:04 PM
hey do you have any rwd 4age looms? engine loom that is.
44GTE
25th January 2011, 10:33 PM
hey do you have any rwd 4age looms? engine loom that is.
Hi
Have some early/ Zenki type in stock right now
$250 delivered to NSW
cheers
ae8zn6
1st February 2011, 10:04 PM
might be interested in the factory skirts with end caps
PT86
2nd February 2011, 08:46 PM
you've been pm'd. not sure you got the msg tho
Savtec
12th February 2011, 06:54 PM
hey mate what looms do you have? im after a JDM 86 loom from a bigport. price to 2333
cheers gav
HI
You have PM
Cheers
44GTE
14th February 2011, 09:20 PM
Hi all
Update container is on the water finally,
I have loaded up some pics of items coming in it onto my website under the following
http://www.justjdmimports.com/apps/photos/album?albumid=9486538
Some items have more than one but only one pictured
I will uploading prices as time permits .
Any questions please just email me on
craig@justjdmimports.com
I will answer as soon as i can, due to work commitments etc.
Cheers
LittleRedSpirit
15th February 2011, 09:15 PM
Looking for a bonnet and hatch, got much in stock? Prices?
44GTE
16th February 2011, 07:07 PM
Looking for a bonnet and hatch, got much in stock? Prices?
Hi
Currently have a black levin bonnet in stock , small upward dent in one spot otherwise good $300
Have a average hatch complete in stock , previous repair at back $125
Have bonnets and hatch coming in
Cheers
Brenton 86
17th February 2011, 06:31 PM
Hey mate,
Roughly how much for the trueno front bar in pic 110
mc68
17th February 2011, 06:41 PM
pm sent :)
Dave
21st February 2011, 07:06 PM
hi craig just wondering how much the EFI tanks will cost cheers
44GTE
21st February 2011, 07:22 PM
hi craig just wondering how much the EFI tanks will cost cheers
Hi
Complete tank setup $400 plus post/freight
Bare tank only $265
Cheers
JDMWheels
21st February 2011, 07:34 PM
Hey mate,
Do you have any TRD 86 Wings to suite a coupe?
I'm trying to get one on my ae71 :)
Dan
44GTE
21st February 2011, 10:50 PM
Hey mate,
Do you have any TRD 86 Wings to suite a coupe?
I'm trying to get one on my ae71 :)
Dan
Hi Dan
Yeah have one in stock now actually if my memory is correct. Will check tommorow
cheers
44GTE
22nd February 2011, 12:12 AM
Hey mate,
Roughly how much for the trueno front bar in pic 110
Hi
$395 with badge
$345 without badge
Mounts extra $155 to suit
Cheers
JDMWheels
22nd February 2011, 12:43 AM
Hi Dan
Yeah have one in stock now actually if my memory is correct. Will check tommorow
cheers
Thanks mate -
If you do could you PM me a pic ? I'm after one that looks like this (Example included) :)
http://img440.imageshack.us/img440/4724/dscn1502k.jpg
Also...
Your Container coming:
Details on Pic's: (Widths and offset's if not listed and rough guide to pricing)
32, 126, 141
Cheers again :)
Dan
whatcamber
22nd February 2011, 07:22 PM
Hey craig interested in a bride reclinable seat with a low mount rail. Anything available now? or how much when stock arrives?
Thanks
bams_keto
23rd February 2011, 10:07 PM
hey mate, need a price on a few things if i could
full jdm levin headlight setup no grill?
Bride low max side mount d/s side rails?
and if you can get one a oem boot lip for a hatch?
thanks
HI
Yes good set of JDM headlights with Fog Brackets and Eye lids in stock $ 550
Fogs extra $200
Have RHS bride side mount rails due in this container $235
OEM Boot spoilers from $200 - 245
cheers
44GTE
3rd March 2011, 08:32 AM
Hey craig interested in a bride reclinable seat with a low mount rail. Anything available now? or how much when stock arrives?
Thanks
Hi
HAve one left in stock currently and have a RHS rail to suit if needed.
Check the thread for the seats and it is shown.
cheers
dtour
3rd March 2011, 11:14 PM
Shoot gun some gt apex, rear seats and side trim, redline tail lights and jdm zenki body loom.
pm me if you have them coming?
Hi
You have PM
Cheers
bones
8th March 2011, 08:59 PM
these in yet ? kinda keen on zenki lsd.
Faceplant456
8th March 2011, 11:01 PM
got any Zenki trueno front lips?
send me a pm
Cheers
Hi
Will check but dont think so, did have 5 at on stage and no body wanted now everybody does >|
cheers
Robo86
9th March 2011, 04:21 PM
is that maroon zenki coupe in yet? wouldnt mind the wing off it!
Hi
Not for sale by it self unless i wreckout. But that looks unlikely as have a few people interested in it.
cheers
McLEVIN
9th March 2011, 04:48 PM
price on a brand new zenki front lip posted to 5023
thanks
chris
Hi Chris
You have PM mate
Cheers
Robo86
10th March 2011, 10:28 AM
bummer! do you at least know what brand it is? never seen it before!
PeakingDuck
10th March 2011, 11:07 AM
Looking for a pair of jdm doors, and interested in the pwr windows + door cards.
If available, please PM me a price. Thanks.
johl
10th March 2011, 09:26 PM
bummer! do you at least know what brand it is? never seen it before!
looks like a 32 gtr wing. i'v seen a few people use 32gtst wings before but not gtr
sld sho
12th March 2011, 06:43 PM
any chance you have a ducktail wing for a ae86 notchbak?
44GTE
12th March 2011, 07:18 PM
any chance you have a ducktail wing for a ae86 notchbak?
Hi
Not sure exactly what you are after.
I have Standard factory to suit 2dr and 3dr
I have large FRP TRD type to suit 2 dr and 3dr also.
Cheers
sld sho
14th March 2011, 01:30 AM
yeah im after the trd one, how much do they go for posted to 3048 melbourne?
john84ie
14th March 2011, 09:42 AM
how much for new front lip?
44GTE
14th March 2011, 10:11 AM
how much for new front lip?
Hi
$400 + post
Cheers
44GTE
14th March 2011, 09:23 PM
Hi all
Update
Unloaded all today, couple of days and should have it all cleared if all goes well.
Cheers
45KIDS
15th March 2011, 01:40 PM
Pm what wheels you have in 4x114.3 anywthing between 15x7.5 - 15x8.5??
Hi
Will
need to check once i can get to them all , but i know i have some 15 x 7.5 -5 SSr mesh type in stock
cheers
Jarrod
16th March 2011, 11:10 PM
jdm Throttle cable?
Hi
Yeah have both new and second hand in stock. PM what you are after
cheers
86coupe
19th March 2011, 09:28 PM
Hi Craig,
After an apex wrap-around rear seat and side trim for a 2 door. Also chrome window visors for a levin.
Stain
20th March 2011, 07:34 PM
Speaking of, would you have Trueno window visors?
And I'm chasing the upper/lowing rad mounts and a decent cap.
44GTE
20th March 2011, 10:37 PM
Speaking of, would you have Trueno window visors?
And I'm chasing the upper/lowing rad mounts and a decent cap.
Hi
HAve visors which came from the Trueno cuts previously but didn't know and haven't noticed they were different. What is different ?
Have the Top Radiator mounts and the lower Radiator rubber mounts in stock.
cheers
44GTE
20th March 2011, 10:38 PM
Hi Craig,
After an apex wrap-around rear seat and side trim for a 2 door. Also chrome window visors for a levin.
Hi
Have some 2dr rear sides and the seat to match in stock
Not sue about LEVIN visors, will have to check. Think i have another set of Trueno
cheers
cheers
86coupe
20th March 2011, 10:54 PM
Do you have you photos of them? Need to be in vgc.
Only difference between visors is the writing on them - and usually most of it has peeled off.
ae86 drifter
21st March 2011, 08:37 PM
PM sent
mack 10
31st March 2011, 12:30 PM
Any exhaust manifolds to suit 16v 4age?
44GTE
4th April 2011, 01:50 PM
Any exhaust manifolds to suit 16v 4age?
Hi
I have STD manifolds in stock , but no primmaris down to the cat.
I also have a set of used extracors in stock
cheers
anastasios
4th April 2011, 03:37 PM
Hey mate,
EFI tank? got one for me?
44GTE
4th April 2011, 06:31 PM
HI
Yeah got 5 in stock
PM if interested
cheers
mack 10
4th April 2011, 07:20 PM
What extractors are they?
hilux05
13th April 2011, 08:37 AM
hey craig
got any half cages in stock for an 86?? 4 or 5 point??
cheers.
44GTE
13th April 2011, 06:58 PM
hey craig
got any half cages in stock for an 86?? 4 or 5 point??
cheers.
HI
Only have some 6 and 7 point cages in stock
cheers
bams_keto
19th April 2011, 02:29 PM
any kouki rear bars? if so how much without mounts
44GTE
19th April 2011, 02:33 PM
any kouki rear bars? if so how much without mounts
Hi
yeah
$275 + post
cheers
john84ie
2nd May 2011, 02:26 PM
what sort of drivers side seats have you?
44GTE
2nd May 2011, 07:20 PM
what sort of drivers side seats have you?
Hi
Only have a recaro SR2 /3 type left for the RHS in stock.
Cheers
haydenz
2nd May 2011, 10:00 PM
craig, do you have any fuse boxes avaliable? I need one that supports my loom which contained fog lights, power steering & power mirrors. Cheers
ae86 drifter
2nd May 2011, 10:48 PM
any kouki front bars with mounts or fibreglass bars craig?
44GTE
3rd May 2011, 09:42 AM
craig, do you have any fuse boxes avaliable? I need one that supports my loom which contained fog lights, power steering & power mirrors. Cheers
HI
Have JDM Fuse Boxs for the engiine bay if thats what you are looking for ?
cheers
44GTE
3rd May 2011, 09:43 AM
any kouki front bars with mounts or fibreglass bars craig?
HI
Yeah have some kouki bars in stocj with mounts and also factory lips on them
cheers
ae86 drifter
3rd May 2011, 09:47 AM
Price on bar to nsw 2278 plz also do u have photos on the website Craig
44GTE
3rd May 2011, 10:13 AM
Price on bar to nsw 2278 plz also do u have photos on the website Craig
HI
Most are from memory, PM me an email if you want and i will see what i can do with other pics. But really flatout at the moment so might be a couple of days.
cheers
trikzlane
24th May 2011, 08:33 PM
hey craig, have you got any cambertops cheap
LittleRedSpirit
13th July 2011, 11:49 AM
Do you have a 1/2 cage or better that would fit in a ke70?
trikzlane
13th July 2011, 08:27 PM
have any decent smallport/212mm HD button clutches
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.