what brake master for a hydro setup

[ke_70]

hey guys had a quick search but is a pretty quick and easy question...

whats a good master cylinder to use for a hyrdo hand brake setup?
needs to be found easily at a wreckers also.

brakes atm are ra60 drums. but will see some sort of an upgrade upgrade one day...

thanks

[corollaart]

Better off with a new one to start with,but if you want second hand try series two landrover clutch master cylinder.If you can find one.

I use a pbk p4872 it cost about 90.00 dollars and works well.

rob

[biggo]

Yair id go for a clutch master too. There was some debate awhile back on the bore size. Cant remeber where or what thread that was in tho. 15/16th rings a bell. Hell ask d1 davey even

[ke_70]

15/16 sounds big as.

isnt there some commo on thats good?

and dont clutch masters only have 1 outlet?

[Andy San]

Yes and then you split the line into two when you get to the rear axle

[ke_70]

dont i split the rear line and put each end in to the master cylinder?

therefore wont you need and in and outlet? the 86 clutch master only has 1 outlet.

can you get a desent master andy?

[Skylar]

You seem totally confused. If you are running the originl rear calipers, you get a master with an in and out.

If you are running dedicated handbrake calipers only then you get a clutch master. You run the one line to the diff then a splitter which will route the fluid to each caliper.

[ke_70]

^ yeah thats the one so what do people use for a master with an in and out?

[Andy San]

Clay which setup are you using? If you are running drum rear end you will only have to plumb the handbrake inline with the rear brake line and use whatever master cyl comes on the handbrake, it will work.

[ke_70]

im making my own lever just need a master cylinder...

[Skylar]

http://www.wilwood.com/MasterCylinders/MasterCylinderLanding.aspx

Ask 'em.

[Andy San]

im making my own lever just need a master cylinder...

I have the right ones at work.

have a look here:
http://autosportdirect.com.au/brakingsystemsmastercylinders/

or you can get a complete handbrake for $120 more

[ke_70]

this is what i need.
http://www.ae86drivingclub.com.au/dcimages/2/2/1/59861.jpg
so there isnt any oem master like this on?e (trailers for example)?
whats a good bore to get?

[Andy San]

Trailer ones are shit quality but they are the same thing I guess