Distance bellhousing to center of gearshifter t50 box

[Bozu]

Like the title says, I'm looking for the distance from the front of the bellhousing to center of gearshifter on a t50 box.
So far I've found on the internet that it's about 670mm, can someone verify that?

Cheers,

Bozu

[86TRD]

Just measured a spare box and its 650mm. or there abouts.
deffinatly not 670mm though.

[Bozu]

Sweet as, I was hoping someone had a sparebox and would measure it up, thanks mate!

[Bozu]

Anybody knows this distance for the sr20det box?
And the sr20det box with rb20 bellhousing?

[assassin10000]

I can confirm the above #'s from measurements I took when doing my W58 adapter.

From where the bellhousing mounts to the center of the shifter 'bucket' is 19 1/4" which is about 490mm.
From the front including the bellhousing (6 3/8") is 25 5/8" which is about 650mm

Andrew

[Bozu]

And does anyone know these measurements for the 4AGZE box?
- The distance from the front of the bell housing to the center of the gear shifter
- The length of the bell housing

[slide86]

there is no RWD 4agze gearbox, its either a t50, or a W series conversion

what are you trying to achieve?