PDA

View Full Version : Nissan s13 p plate legal



OMG866
15th February 2009, 08:26 PM
car sold please delete

blair
15th February 2009, 09:17 PM
cage locker bucket seats all engineered?

marvis
15th February 2009, 09:55 PM
Bride seats and lockers can't be legally engineered.

Clinton
16th February 2009, 12:33 PM
lol@welding the diffs up at keans.

shift_rook
16th February 2009, 12:41 PM
so yeah if you pull that stuff out it'll be p-plate legal, tohugh having said that having a later model silvia engine in it.. would that be counted as an engine mod??

Clinton
16th February 2009, 02:10 PM
no it doesnt count as an engine mod.

OMG866
16th February 2009, 05:30 PM
cage, seat, and locker are not engineered, cage can be taken out to lower cost, seat can be replaced with standered seat, diff well its locked and there is no reversing that unless replaced,

julzy
16th February 2009, 07:45 PM
was this on boostcruising a month ago?

OMG866
16th February 2009, 07:59 PM
yea mate was advertised on bosst loosing. but went through a stage where i wanted to keep the car, but now i deff kno i need to sell it due to work. but i am lookin for a rolla or something plus aill cash, are u still looking for a 13 Julzy

julzy
16th February 2009, 08:16 PM
mmmmm maybe,
i messaged ya off a mates account on boost.
but dont know if i want something thats had a hard time around the track.

OMG866
16th February 2009, 08:23 PM
lol funny thing is. that it has never been to the track. never had a hard time. i have only driven it to and from work. thats why i was so confused if i should sell it or not. like i have done so much work to this car and not even had a tru go of it. i got this car and my plan was to set it up for the track, and as soon as i have jsut about finished, my boss says i need to take all gear with me from a to b. and i simply dont have enough room in the 13, thats why im saving for a ute. but would still like a rolla. jsut need alittle cash atm,

julzy
16th February 2009, 08:27 PM
How does it go compared to a 4age rolla?
Has the engine number been swapped over?
hows it drive, suspension abit hard for daily or what?
any problems?

OMG866
16th February 2009, 08:42 PM
well to tell u the truth of the starting point they go jsut about the same. but once the vct kicks in about 4400 rpm there is fair differnce in power. the motor has good pick up. the lightend nismo flywheel makes a big differnce. the brass button is awsome. alittle heavy on the foot but u get used to it. doesnt slip one bit. the coilovers are awsome. i was thinking of taking them out and putting them in a rolla but the spring rate would be much to hard for the wieght of a rolla. so they may as well stay in the car. i would like to sell it set up to some one who is lookin for a car already mostly done.. the only two things thast is wrong. is the cold start injector was not hooked up when it was wired up,, its not a big deal, jsut before u start it on a cold morning u gotta pump the throttle a few times. and the rims. i would personally jsut buy some different once. but that jsut comes down to wat i would like the car to look like there is noting wrong with them.

Rhys.
16th February 2009, 11:59 PM
yeehaaaa club dirty hahahaha


you know you want another 86, do it nick

wideslider
17th February 2009, 09:42 AM
I had the same cold start issue when I did a S14 to S13 conversion, I don't recal them actually having a cold start injector, Are you using the S14 loom?

Want to sell the Bride separatly, It's a match to my drivers seat?

OMG866
17th February 2009, 04:43 PM
yea i am using the s14 loom and ecu, i will get back to u on the bride in about three days if thats ok. i have a few ppl interested

OMG866
17th February 2009, 04:43 PM
oh and rhys, totally miss my hachi.

julzy
17th February 2009, 04:45 PM
hey mate,
can ya get some more pics?
interior, body, engine etc thanks

OMG866
17th February 2009, 05:15 PM
i planned to do it this afternoon. but it is pissin down. and has been for the last week. u boys down under need some of this rain

julzy
17th February 2009, 07:45 PM
yeah pics would be sick,
just don't kno if i could swap,
rolla means so much to me loll

OMG866
17th February 2009, 09:37 PM
yea man totally understand. i miss my hachi and spirit. no biggy, some one out there will be interested in it, jsut a matter of time

julzy
17th February 2009, 10:06 PM
I'll wait on more pics,
then suss out what i want lol

Rhys.
18th February 2009, 04:28 PM
you so want to swap me for my hachi haha

OMG866
18th February 2009, 05:53 PM
i dno rhys. pm me. srs offers only :)

uploading new pics now

blair
18th February 2009, 06:07 PM
woh @ more neg camber in rear than front!

car looks hot tho man good luck with the p-plate thing.

julzy
18th February 2009, 06:11 PM
Do you still have all the missing trim bits?
and carpet stuff for the boot?

OMG866
18th February 2009, 06:23 PM
i have all the interior trim. the rear carpet was so dirty when i got it so i jsut replaced it. this stuff is so much better. easy to clean etc

OMG866
18th February 2009, 06:24 PM
also will sell parts seperate

full 13 roll cage with padding. 800

s13 front and rear sway bars. F 30mm R 28mm, 250 cash

pikle
18th February 2009, 07:13 PM
yea i am using the s14 loom and ecu, i will get back to u on the bride in about three days if thats ok. i have a few ppl interested

hey mate i got a rolla has coil overs in the front ford springs in the back camber tops sigma control arms wheels yer how much if i did a swap but if u took the cage and seat out message if ya interested0433481831

julzy
18th February 2009, 08:58 PM
Was this originially sr turbo?
turbo diff? g/box etc?

pen15
18th February 2009, 09:16 PM
i can vouge for this car considering i help put this motor in it runs really smoothly very nice car i love cruising in it btw every1 seat is sold me thinks to my brother

bams_keto
20th February 2009, 06:28 PM
someone buy this off him, so he can buy my engine off me, so i can buy a 86 shell!!
then were all happy, good car anywayz for the price with those mod's!!

OMG866
20th February 2009, 06:37 PM
price drop 7K without coilovers, cage seat, sway bars, and castor rods. BUt will still include the other parts that are listed in my add. will install standered suspension, sway bars and seat and castor rods :)

julzy
20th February 2009, 06:37 PM
wat diff, gbox etc?

bams_keto
20th February 2009, 06:43 PM
wat diff, gbox etc?

diff is locked r180 and the gbox is sr20det

julzy
20th February 2009, 06:50 PM
price of car with all suspension and seat?
with the cage?
8.5?

OMG866
21st February 2009, 11:14 AM
if anyone wants the car with all the suspension seat etc, let me kno asap cause i plan on putting stock parts back in, 9.2 the whole car.

OMG866
22nd February 2009, 08:40 PM
bump myself

OMG866
23rd February 2009, 09:21 PM
throw me some offers of wat u wont etc

OMG866
25th February 2009, 04:17 PM
i am neg on price. come on gotta sell this thing cant afford to have 2 cars

bams_keto
26th February 2009, 09:47 PM
good car people buy up,
quick car for p plate drivers, keeped up with me and i've got sr turbo.
handles very very well

pen15
1st March 2009, 06:52 PM
cage is now out all stock interior is all in now all it has left thats not stock is the seat and suspension car is also now going for 6500 stock as a rock

OMG866
1st March 2009, 09:08 PM
yea price drop 6500 take her away. come on ppl good car needs new home :)

OMG866
3rd March 2009, 09:08 PM
price is neg. some1 out there must want a silvia. :)

little-cherri
4th March 2009, 11:04 AM
still wanna sell fron n rear sway bars? post to melb 3038?

OMG866
8th March 2009, 07:55 PM
bah sorry mate. sorta want to sell the car whole. if no one is interestd soon i will post them.. cheers mate.. bump still for sale

OMG866
9th March 2009, 03:07 PM
price drop 6300

Rhys.
9th March 2009, 04:10 PM
swap me mofo

OMG866
9th March 2009, 04:20 PM
arnt u after a turbo one tho???

OMG866
10th March 2009, 08:35 PM
Sold!!!!