VR4 Galant

[ozyvr4]

Hi there guys, I thought I would add some info on my VR4 Galant. I owned it for 4 years.

1990 HH VR4 Galant ( ozzy release )
Forged 4G63
Fored Performance FP3052 ( GT3076 internals )
Forced Performance race cast turbo mani
Fprced Performance 4" intake with Weapon R 4"x10" filter
880 PTE Injectors
SARD FPR
Walbro 255 pump
ECMLink ECU ( airflow gone, running speed density )
Innovate WB02
Brian Crower 272 cams
Unorthodox cam gears
Tial 44mm wastegate
3" exhaust
550x240x75 IC with waterspray
2.5" IC piping

Dobison super low springs
KYB AGX shocks
SS brake lines
Green stuff front pads
Whiteline strut brace & front & rear sway bars
J-spec RS front bar & bonnet

There is a lot more

A few pics.
http://www.ae86drivingclub.com.au/dcimages/7/7/4/3/64647.jpg
This is the engine with the old turbo & intake. I'll get some new pics of the new turbo
http://www.ae86drivingclub.com.au/dcimages/7/7/4/3/64648.jpg

[ThatsHowWeRoll]

That is cool as, would be real fun. What sorta power does it make? Would be pretty responsive with that set-up.

[ozyvr4]

Have not had on the dyno yet as I have tuned myself.

I did have it a dyno with a TD05 18g & it made 185wkw @ 5000rpm ( 22psi ) .

The new turbo feels stronger @ same boost but will be turned up to 25psi once I get it profresionally tuned soon. I'm at the point where the pro can finish it off. I'm hoping for 250wkw. Turbo is good after 3500rpm & fullboost around 4200rpm but a little lazy under 3500rpm.