View Full Version : Beams KE10 Build
Jordain
20th March 2011, 06:34 PM
Well this is where it all starts for me, first car build and first car. Its a 1969 ke10 Corolla. I bought it off eBay and here is what I bought.. thinking it was complete.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs243.snc4/39486_1541736028670_1393026071_1434106_5858226_n.j pg
Actual image from the eBay advertisement
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/65637.jpg
The night I got my car home, At this stage I started to realise things were missing haha!
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs263.snc4/39486_1541736108672_1393026071_1434108_4071310_n.j pg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1200.snc4/155215_1717466661826_1393026071_1814803_2656742_n. jpg
I started pulling things off, before I knew it the car was a shell
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs224.snc4/38534_1544226650934_1393026071_1439792_4573704_n.j pg
and what would a Corolla be without rust.. We love rust. Not.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1335.snc4/162745_1717166534323_1393026071_1814189_167593_n.j pg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs616.snc4/59640_1628598880187_1393026071_1639641_6157277_n.j pg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs061.snc4/34412_1615871442009_1393026071_1614226_5433087_n.j pg
Main reason I wanted to pull and lip the guards abit...
http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs006.snc6/165630_1742049156373_1393026071_1862658_3346170_n. jpg
Flare look dodgy here, but they got completely welded on and ground back.
It gets better, I spent 2 months on the body preparations making sure I got it as good as I could. I'm not a Panel beater or spray painter either.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1143.snc4/148561_1711355389048_1393026071_1802147_5603183_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs012.snc6/166284_1770306142780_1393026071_1931502_4100317_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs022.snc6/165264_1776986509785_1393026071_1946786_872776_n.j pg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1387.snc4/163947_1778518468083_1393026071_1950557_4503465_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs067.snc6/167726_1778517828067_1393026071_1950556_7077936_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs047.snc6/167758_1778517108049_1393026071_1950554_1637163_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs070.snc6/168025_1778516788041_1393026071_1950553_5634223_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs063.snc6/167343_1781750788889_1393026071_1958024_1544490_n. jpg
Domo say's Hi :)
The last 2 months have deffiantly paid off, the car is awsome. I'm currently assembling it, finding all the little trims and getting replacements for most parts is prooving to be a pain although I will get it done. I picked the car up from my mates spray booth 2 days ago. I have all the chrome strips on, most of the glass in and most rubbers all cleaned and ready to be put on. The car should be done soon I hope.
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs776.ash1/166650_1781701307652_1393026071_1957957_1741989_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs736.ash1/162963_1781750108872_1393026071_1958019_7438285_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs799.ash1/168897_1785081392152_1393026071_1964409_6862452_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs060.snc6/169093_1785081072144_1393026071_1964407_6417847_n. jpg
New Rubbers :) Just about all through the car. I replaced every perished rubber I could get my hands on... cost abit but worth every cent!
http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs077.snc6/168785_1785080992142_1393026071_1964406_4669054_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1386.snc4/163796_1785080632133_1393026071_1964404_1480465_n. jpg
Stickers are appearing in numerous places hahaha. I will get a JNC one and put one somewhere :)
Update soon!
Jordain
20th March 2011, 06:35 PM
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/183386_1852589639816_1393026071_2084459_1464735_n. jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/183167_1842205620222_1393026071_2067011_1892569_n. jpg
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/180698_1852589479812_1393026071_2084458_1718759_n. jpg
Well I got the car running with the 4k motor, till I decided It wasn't fast enough within a few seconds of driving it.
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/188778_1872830145816_1393026071_2117797_5924994_n. jpg
So out goes the 4k and in goes a new motor.
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/197366_1872828705780_1393026071_2117789_4053389_n. jpg
2TG Pow-ah
Also started building another KE10B... Its dead original.
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/189661_1870943538652_1393026071_2114666_5078713_n. jpg
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/183432_1870943658655_1393026071_2114667_7301119_n. jpg
Paints pealed in a few spots around the car and one tiny rust bubble has appeared on the drivers door, but I've since tig welded it up and its getting finished this weekend.. hopefully have it in the spraybooth for a full respray within the next 2-3 weeks.
This ones getting a 5k/4spd motor... purely for weekends.
If anybody is interested, I actually have another KE10.. 4k/toyoglide in decent condition, although has some more rust. PM me if you are serious about it.
blake.
20th March 2011, 07:46 PM
dude this is nice, i think i was talking to you earlier bout the ke70. jordian is it?
Hokey
20th March 2011, 08:43 PM
awesome work. 2tg is going to be a tight fit. good luck with it. will be a very quick car
R&D Mechanical
20th March 2011, 08:54 PM
stunning, love the old ones!
Blaike
21st March 2011, 01:31 PM
good stuff jordain
Jordain
21st March 2011, 05:48 PM
Yeah, Jordains the name :)
Yeah, 2tg.. doesn't exactly fit in the old KE10's.
I've got a custom cut down KE70 cross member with the rack and pinion for it to go in soon when i sort out some stuff, R31 LSD diff.. Tilton floor mounted pedal box all inside the car so I can get those porno DCOE 40 webers or FCR quad bike carbys in there nicely.
The 2tg has been bored a little and has a 2t crank, although i'm putting a 3t crank into it so it's just shy of 2l.. 1940cc to be precise, set of reground cams and equal length stainless extractors. Ah, plenty of welding to do haha!
This cars currently on hold for a little bit, I am going to finish the original KE10 first, just because I want a car and the 2tgke will take a while to sort out.
Hokey
21st March 2011, 10:15 PM
it'll go out to a 1940 if you use 89mm forged pistons. i was going to build one of these ages ago and was going to run 3t crank and 86mm acl cast pistons which helped keep costs down and end up with a capacity just over 1.8l.
Jordain
22nd March 2011, 06:33 PM
Yeah 89mm forgies, I'm still undecided though. I think the 1600 will rev harder, but I may be wrong and my friend Fonzy did the 1940cc motor and thinks its shits all over the 1600
Jordain
9th May 2011, 08:29 PM
http://www.ae86drivingclub.com.au/dcimages/520435.jpg
http://www.ae86drivingclub.com.au/dcimages/520436.jpg
http://www.ae86drivingclub.com.au/dcimages/520437.jpg
Yes I know its off centre. KE70 rails seem to bend inwards.. No idea why but it fits in the KE10 Like this! Yes I measured about 5 times because I could not believe it haha!
http://www.ae86drivingclub.com.au/dcimages/520438.jpg
http://www.ae86drivingclub.com.au/dcimages/520439.jpg
Birdpoo weld
http://www.ae86drivingclub.com.au/dcimages/520440.jpg
2TG KE10 Cross member with a rack and pinion.. Woo! - Excuse the blind looser... hahahah!
http://www.ae86drivingclub.com.au/dcimages/520441.jpg
The result, Two happy Corollas!
OH forgot to mention... New steering wheel for JDM KE10
http://www.ae86drivingclub.com.au/dcimages/520442.jpg
Got into it again today...
http://www.ae86drivingclub.com.au/dcimages/520443.jpg
http://www.ae86drivingclub.com.au/dcimages/520444.jpg
http://www.ae86drivingclub.com.au/dcimages/520445.jpg
http://www.ae86drivingclub.com.au/dcimages/520446.jpg
http://www.ae86drivingclub.com.au/dcimages/520447.jpg
http://www.ae86drivingclub.com.au/dcimages/520448.jpg
Jordain
9th May 2011, 08:30 PM
http://www.ae86drivingclub.com.au/dcimages/520449.jpg
Parts room haha - Yes those are brand new KE10 Tail lights!
http://www.ae86drivingclub.com.au/dcimages/520450.jpg
Ke70 cut down cross member with stock Ke70 LCA with Ke70 struts with Ke10 top hat.. works nicely although RCA's and Custom Adjustable LCAs that are shorter are needed, so are camber top hats.
http://www.ae86drivingclub.com.au/dcimages/520451.jpg
14x8 -15 SSR Meshies.. Look nice as and suit the car perfectly!
dungbox
12th June 2011, 11:59 AM
love this, how is the rack an pinion conversion working out?
keen to do teh same thing to my ke18 panelvan
don't suppose you have a spare front bar you want to sell by chance??
Jordain
21st June 2011, 01:39 PM
I've actually just payed for a 3SGE BEAMS motor for the car. Rack and pinion works well. I do have a few front bars. I want $300 for a mint one or I got bent rusty ones you can have for $200 but theres a few people who said they want it but haven't paid yet so yeah.. might not have anymore. Also do you know Jono in Tassy... his got a ke10 !
Jordain
27th June 2011, 11:31 AM
http://www.ae86drivingclub.com.au/dcimages/520752.jpg
http://www.ae86drivingclub.com.au/dcimages/520753.jpg
Saab Interceptors to be widened to 8" next week
http://www.ae86drivingclub.com.au/dcimages/520754.jpg
Nice fat 205/65's
I get my 3SGE BEAMS this weekend hopefully. I picked up the Nissan S13 gear a few hours ago and plan to bolt it all in tomorrow morning on my custom LCA's... Need to cut the Spring perch off the nissan struts and modify them abit :)
http://www.ae86drivingclub.com.au/dcimages/520755.jpg
I'm not actually sure if I'm going to use the Nissan stuff. I need to do some measurements first, make sure it works.
Either way I have to:
-Shorten the LCA
-HSD Coil over sleeve kit
Ke70:
Pros:
-Bolts in
-Its all standard
-No steering geometry issues
Cons:
-4x114.3
-Brakes are small
S13:
Pros:
-Adjustable camber
-Brakes are sorted out
Cons:
-4x114.3
How i'm going to overcome my 4x114.3 stud pattern issue for a while... I got a set of SAAB 900 1985-86 4x114.3 chasers, same as the Saab 4x108 chasers on the rear just different stud pattern so that fixes the wheels problem for a little bit. I will end up changing all the brakes later on me thinks D:
http://www.ae86drivingclub.com.au/dcimages/520756.jpg
http://www.ae86drivingclub.com.au/dcimages/520757.jpg
http://www.ae86drivingclub.com.au/dcimages/520758.jpg
http://www.ae86drivingclub.com.au/dcimages/520759.jpg
Low much?
http://www.ae86drivingclub.com.au/dcimages/520760.jpg
RRRRMMMM :)
http://www.ae86drivingclub.com.au/dcimages/520761.jpg
I really like these rims haha!
http://www.ae86drivingclub.com.au/dcimages/520762.jpg
The Camber is adjustable, the spring height is adjustable, the lock is amazing and the ackerman angles are very very close to original KE10 spec. But honestly, who knows if it works until you try it. By moving the wheel up and down on the shock I've noted that theres virtually any bump steer which is a good sign.
But in all seriousness... it looks rediculous.
http://www.ae86drivingclub.com.au/dcimages/520763.jpg
At the moment I'm stuck, don't have any 4x114.3 rims so the car has to sit on space savers
http://www.ae86drivingclub.com.au/dcimages/520764.jpg
http://www.ae86drivingclub.com.au/dcimages/520765.jpg
Shot of the Diff setup. I still got some work to do on the rear end but it is substantially easier than the front part of the car.
If i haven't mentioned... I'm putting a 3s Beams motor into the car. It's going to be sick :DD
Any day now the halfcut should turn up :)
shift_rook
27th June 2011, 11:54 AM
what an epic thread, nice work, good to see you getting your hands dirty, kep the updates coming!
Jordain
28th June 2011, 10:04 PM
http://www.ae86drivingclub.com.au/dcimages/520776.jpg
Some JDM love yo!
http://www.ae86drivingclub.com.au/dcimages/520777.jpg
ah the Saab chasers fit so nice with the nissan suspension in the front. Get my HSD sleeve kit soon... then I can actually set it at a proper ride height!
Nicko
29th June 2011, 11:11 AM
Bloody hell, nice work. Can't believe I hadn't spotted this thread until now!
I have a soft spot for KE10s...
Though you should be slapped in the back of the head for putting an illest sticker on a KE10... lol
Nice build thread.
Can't wait to see the progress
Jordain
29th June 2011, 11:58 PM
http://www.ae86drivingclub.com.au/dcimages/520780.jpg
it's happened!
Thanks Nicko, Hahahahah... I love being a tosser with all these random JDM stickers, It annoys the shit out of all my mates.
going to take abit to get her in... drop the cross member... place the engine on the cross member then shape a firewall around it!
Nicko
30th June 2011, 12:00 AM
Beams + KE10 = FULL OF WIN !
Jordain
30th June 2011, 12:37 AM
It will be quick, well balanced and hopefully should steer, point and feel the same as my gearbox superkart ;)
Seventy
30th June 2011, 11:07 PM
you will be driving it from the back seat, by the looks of it
Jordain
30th June 2011, 11:58 PM
http://www.ae86drivingclub.com.au/dcimages/520800.jpg
Dreaming hahaha!!
http://www.ae86drivingclub.com.au/dcimages/520801.jpg
http://www.ae86drivingclub.com.au/dcimages/520802.jpg
http://www.ae86drivingclub.com.au/dcimages/520803.jpg
http://www.ae86drivingclub.com.au/dcimages/520804.jpg
More pictures of the motor in the car... Its a challenge to get it in...
quoted from my facebook: " Cut the shit out of the car, take the crossmember out, then lift the body to the roof then push the motor under it then lower the body then use the engine crane to lift the engine up then put the crossmember in and bolt it in. "
Seventy, it's not to bad hey.... Motor is far back but the seats aren't to far back but won't be fitting an adult in the behind the passenger seat because I plan for floor pedals so seat is far back anyway!
Jordain
1st July 2011, 12:00 AM
Oh also I have to cut all the trans tunnel out and redo it all again -_-. Tomorrows job is to get the motor in there with the engine mounts all welded 100% with the gearbox mount all welded in. I want it sitting in there.. then once thats all done I will bolt the gearbox mount in without the gearbox/engine and cut the tunnel out and recreate a tunnel 400 wide to comfortable fit the 6 speed box in. It will be big in the KE since its so little. Once thats done, start the firewall boxing.
Jordain
1st July 2011, 02:21 PM
http://www.ae86drivingclub.com.au/dcimages/520808.jpg
Shortened cross member for KE10
http://www.ae86drivingclub.com.au/dcimages/520809.jpg
Sitting in its new home
http://www.ae86drivingclub.com.au/dcimages/520810.jpg
http://www.ae86drivingclub.com.au/dcimages/520811.jpg
http://www.ae86drivingclub.com.au/dcimages/520812.jpg
http://www.ae86drivingclub.com.au/dcimages/520813.jpg
http://www.ae86drivingclub.com.au/dcimages/520814.jpg
http://www.ae86drivingclub.com.au/dcimages/520815.jpg
Should be able to fit a decent exhaust into it!
http://www.ae86drivingclub.com.au/dcimages/520816.jpg
Sumps abit of a worry but hopefully it won't get ripped off.
Mounts have been made but first half of the day went to cutting more of the firewall out because it just wasn't sitting right and the firewall was rooted anyway so might as well start over. Somebody added a brake booster in about 1990..... and they just hacked and stick welded it in.
Nicko
1st July 2011, 03:37 PM
Epic amounts of win in this thread
Jordain
1st July 2011, 04:34 PM
current plans are to lower the crossmember 40mm, gives me more room in the engine bay, allows me to get the rear coil pack and allows room for a strut brace. Lowering the crossmember would typically make it handle like poo but since I'm start from scratch with the suspension it doesn't matter!
More pictures soon.. I hope to atleast have it mounted by tonight, but I think I'm dreaming hahahah!
Nicko
2nd July 2011, 02:41 AM
At the progress you're making on this thing, you should stop fucking about and just dry sump the fucker...
Jordain
2nd July 2011, 06:28 PM
http://www.ae86drivingclub.com.au/dcimages/520817.jpg
Space the crossmember down
http://www.ae86drivingclub.com.au/dcimages/520818.jpg
Engine sits further back and lower too!
http://www.ae86drivingclub.com.au/dcimages/520819.jpg
Holden Astra radiator
http://www.ae86drivingclub.com.au/dcimages/520820.jpg
Haha I don't have the dosh to drysump it or even put ITB's on it. I was going to buy a set but changed my mind when I worked out a realistic price of what it will cost to finish it off so the plan is to finish it off, then once I've recovered from the intial hit I will build the motor up... ;)
lolwat
3rd July 2011, 05:00 PM
ooobecuase beams in a ke10 wont be fast enough HAHHAHA
fucking tidy car, looks like you got room for a 180 project there :P
Jordain
4th July 2011, 12:39 PM
Hahahah I still think it will be abit slow ;)
Yeah plenty of room for a 180 project.... but who wants it hahaha!
tristannn
5th July 2011, 01:01 AM
I was loving reading through this thread, loving how the car turned out, loving the low and workmanship...
...and then I saw the beams to go in....
http://25.media.tumblr.com/tumblr_lmo5182gpG1qlqrfgo1_500.gif
Jordain
5th July 2011, 03:12 PM
I don't have a comeback to that ... but fauckthat was funny hahahahah!
http://img7.uploadhouse.com/fileuploads/12290/12290867811794812b7575d466edda1184b873c6.jpg
My face after I stepped out of the engine bay and looked at my car ^
Robo86
5th July 2011, 03:54 PM
i would love a ke10 with a ge, awesome car dude.
lolwat
5th July 2011, 10:14 PM
sorry....... nice car but.......... were's the JDM, totes not enough JDM, like its cool but not "JDMCOOL"
blair
5th July 2011, 10:33 PM
fuck on, rad build! (Y)
Blaike
6th July 2011, 01:30 AM
im sick of seeing this car
Nicko
6th July 2011, 04:28 AM
sorry....... nice car but.......... were's the JDM, totes not enough JDM, like its cool but not "JDMCOOL"
It is a KE10, you fricking moron.
Jordain
6th July 2011, 12:00 PM
Hahaha nicko, this a friend of mine. It's a joke haha!!
Nicko
6th July 2011, 12:01 PM
Soz, posted at 3:28am, getting up for work...
Couldn't see straight. Should have realised the sarcasm!
Jordain
6th July 2011, 05:44 PM
it gets like that hey! I ordered these BA falcon engine mounts... turned up today, but theres only 1 .__. Farout.. Have to wait another 2-3 days for the other one :(
lolwat
7th July 2011, 12:43 AM
It is a KE10, you fricking moron.
:jdmsmile::jdmsmile::jdmsmile::jdmsmile:
<3 you nick
Blaike
7th July 2011, 03:23 PM
thats wat happens when u buy ebay shit from thialand hahahha
Jordain
10th July 2011, 12:26 PM
Hmmm well. I've put the gearbox in the car and well.... :pinchme: It fits...... but its behind the rib which is smack in the middle of the bracing across the floor and I'm not keen to cut that out unless I'm 100% sure the things going to get engineered.
I won't be working on it anymore for about 12 weeks as I have my HSC to finish off. Its already taken enough time
See you guys in 12 weeks with an update! :soldier:
Nicko
10th July 2011, 12:31 PM
Very keen on the update
All the best with the HSC!
Jordain
10th July 2011, 12:37 PM
Haha thanks man. I'm thinking I will have to get a 5 speed supra box as the 6 speed altezza is just way to long in a KE10. I'll find to source some measurements etc but at the moment don't have time but in 12 week's I will have a few months off so hopefully I can push it over :D
Jordain
18th July 2011, 09:58 PM
http://www.ae86drivingclub.com.au/dcimages/520909.jpg
abit of JDM goodness!
Car will have progress soon... not from me though!
lolwat
18th July 2011, 10:05 PM
what those 6 speeds worth???
oi you getting to work on it, while you bludge at school?
AJPS
18th July 2011, 10:06 PM
6 speed around a grand or a bit over
lolwat
18th July 2011, 10:14 PM
:|
my next question was goingt o be does anyone do 4a to them but
fuck that
70rolla
21st July 2011, 10:16 PM
wered the mklll's come from what size man
Blaike
23rd July 2011, 12:19 PM
there off his mates cappucino.14x7 with sum positive offset. looks sweet on the ke10 tho
Jordain
9th January 2012, 10:32 AM
http://www.ae86drivingclub.com.au/dcimages/521864.jpg
Cusco tops
http://www.ae86drivingclub.com.au/dcimages/521865.jpg
http://www.ae86drivingclub.com.au/dcimages/521866.jpg
Ke30 radius rods and brackets
http://www.ae86drivingclub.com.au/dcimages/521867.jpg
Cool little capella that I fell inlove with... :)
http://www.ae86drivingclub.com.au/dcimages/521868.jpg
http://www.ae86drivingclub.com.au/dcimages/521869.jpg
well come a long way.
KE20 crossmember, all standard but I unpicked the mounts and moved them out 15mm to line up perfectly. Here's a picture of what I mean.
http://www.ae86drivingclub.com.au/dcimages/521870.jpg
Then mig welded the mounts and put a few plug welds... that's not moving anywhere anytime soon.
http://www.ae86drivingclub.com.au/dcimages/521871.jpg
This shows the 30mm crossmember space down ... no I won't be using oversized nuts lol. Hopefully have the 30x40mm solid bar made by this afternoon.
http://www.ae86drivingclub.com.au/dcimages/521872.jpg
This picture show's how far back the engine is, I've got a few solutions to the coilpack problem.
http://www.ae86drivingclub.com.au/dcimages/521873.jpg
With a 40mm RCA, Cold bent strut to re-allign the King Pin Angle. As you can't see, theres about 30mm from the 7" rim to the strut and thats all square... so I'm going to get abit more camber from the strut. Also show's how low the motor is, it's a lot lower then a 4k in a KE10, although it's not lower than the sill's.. Plan is to make a 12mm Bash plate that goes from the front of the car to the crossmember to protect the nice beams sump...
http://www.ae86drivingclub.com.au/dcimages/521874.jpg
Nice fit so far... very happy with it.
http://www.ae86drivingclub.com.au/dcimages/521875.jpg
Decent amount of lock, with a 195/45r14 tyre, abit of massaging on the inner guard and some more castor I'll be able to get a lot more lock. although may need the front of the guard choppped out to get lock... decisions decisions.
Nicko
9th January 2012, 10:50 AM
*golf clap*
eriously nice work there!
Vaughn
9th January 2012, 11:24 AM
Looks Minty
Jordain
9th January 2012, 06:46 PM
http://www.ae86drivingclub.com.au/dcimages/521876.jpg
bought the Kit from Ireland, Milling the rear housing myself and I'll pull the selector shaft out and either outsource the cut or just try mount it in the mill and cut it with the mill... Dunno yet but at the moment, i'm shortening the selector shaft and the rear housing part where Dad's pinky is by about 35mm so the Gearbox can sit about 40mm higher as it will clear the Central floor brace. Gives it just that little bit extra clearance and will make the motor sit 100%
BTW this was a copy paste from my other thread... for the people who don't know what a LEEN conversion is... here's a pic
http://www.gearboxconvert.com/Images - Gearcon/Part Thumbs/246.jpg
haldz
9th January 2012, 10:47 PM
i give credit when credit is due
nice job man
Jordain
10th January 2012, 12:19 AM
Cheers guys, its motivation which keeps the spirit of every project strong. Going to numerous rides in a standard KE10 still puts a smile on my face, Going for a hoon with a mate and his well known 3SGTE KE70 also put's a smile on my dile. Cheers for the compliments guys, will continue posting to this forum!
Jordain
10th January 2012, 05:53 PM
http://www.ae86drivingclub.com.au/dcimages/521878.jpg
SUPRA W58 gearbox mount, needs a little modification to fit
http://www.ae86drivingclub.com.au/dcimages/521879.jpg
fabbed up some sort of a gearbox cross member... shame I forgot about the fact that Gearbox mounts are meant to bolt off... so I might make another one later down the track when I could be bothered.
http://www.ae86drivingclub.com.au/dcimages/521880.jpg
My welds are improving :)
http://www.ae86drivingclub.com.au/dcimages/521881.jpg
With the notch to the central floor brace, It allowed me to raise the gearbox nearly 60mm making the engine and gearbox level which allowed the 4th coilpack to be removed. Very happy with the positioning of everything so far.
Jordain
11th January 2012, 06:52 PM
http://www.ae86drivingclub.com.au/dcimages/521882.jpg
mid gearbox mount finalisation, Stickerbombed rearview mirror... lol got abit bored of welding haha, had to mix it up.
http://www.ae86drivingclub.com.au/dcimages/521883.jpg
Tough as guts
http://www.ae86drivingclub.com.au/dcimages/521884.jpg
Motor sitting happily.
http://www.ae86drivingclub.com.au/dcimages/521885.jpg
Chilled summer day.. finally, out of the shed. So so glad it's mounted.
http://www.ae86drivingclub.com.au/dcimages/521886.jpg
Had to chuck a seat in and get a feel of the new car, defiantly put a smile on my face sitting in it!
Jordain
13th January 2012, 09:55 AM
http://www.ae86drivingclub.com.au/dcimages/521887.jpg
Getting over the whole firewall/tunnel thing, so did abit of sticker bombing on this car to annoy some old people :)
http://www.ae86drivingclub.com.au/dcimages/521888.jpg
Flush with the guards..
http://www.ae86drivingclub.com.au/dcimages/521889.jpg
Desired ride height, sump is around 50mm off the ground here.
I've got abit of a problem. I need more camber. With a KE20 crossmember, Ke70 LCA to keep the bottom of the wheel under the guard and the Cambertops wound all the way in ( as close as I can get it to the tower ) there is still positive camber. The only thing I can think of is to get 40mm RCA's to re-allign the roll centre, Cold bend the struts and if that doesn't do it chop the tops of the strut tower's out and push them out to get more camber. I only want around 0 to -3 camber.
Jordain
13th January 2012, 01:53 PM
http://www.ae86drivingclub.com.au/dcimages/521890.jpg
http://www.ae86drivingclub.com.au/dcimages/521891.jpg
dr1ft-pig
14th January 2012, 03:27 PM
had no idea there was beams involved here.... fucking win... good work man
Jordain
15th January 2012, 10:36 AM
How do I rename the thread... Beams KE10 ahaha?
Nicko
15th January 2012, 10:45 AM
Sorted that for you sir.
Jordain
15th January 2012, 09:18 PM
Cheers Nicko! Might get a few more interests now haha!
Tim.duncan
15th January 2012, 09:24 PM
mmmm beams delicious
Vaughn
15th January 2012, 09:43 PM
THIS IS FREAKING BALLER
Love those shots above
looks so 'low n slow'
But this thing will be off its nut!!!!:wub:
Jordain
24th January 2012, 10:10 PM
http://www.ae86drivingclub.com.au/dcimages/521904.jpg
KE20 cross member, KE70 rack and pinion... little temporary brackets.
http://www.ae86drivingclub.com.au/dcimages/521905.jpg
sits snug.. roughly 85mm from the centre of the centre of the LCA bushings, and about 23mm from the end of the crossmember to the rack. 8mm above the LCA pivot point. Will do a bumpsteer check soon...... Looks good so far though.
Bit of an update.....
Castor rod brackets on and castor rods mounted
http://www.ae86drivingclub.com.au/dcimages/521906.jpg
http://www.ae86drivingclub.com.au/dcimages/521907.jpg
Decent amount of lock... can get a little more but dont think i'll bother..
http://www.ae86drivingclub.com.au/dcimages/521908.jpg
went for a 2 hour train ride across sydney with $700 in my pocket tonight... OHHHHHHHHH the joy's of being licenceless. :bash:
http://www.ae86drivingclub.com.au/dcimages/521909.jpg
I bought these :laff:
AE86 hubs, Ae86 AJPS rx7 caliper brackets, rebuilt FC calipers, EBC greenstuff pads, Brand new civic discs redrilled by AJPS... all bolts. Mmm got to love bolt on shit!!! Makes it so easy. :cool:
http://www.ae86drivingclub.com.au/dcimages/521910.jpg
http://www.ae86drivingclub.com.au/dcimages/521911.jpg
Goign to make a 3SGE BEAMS>AE86 bolt in conversion. It will include a Gearbox crossmember, Engine cross member, LEEN SXE10 shifter kit... Hopefully under a grand.
Jordain
24th January 2012, 10:12 PM
Oh also... 0 bump steer until on full lock, on the last 20mm of compression.... then the rack moves 2mm to whatever way the wheels going. Pretty darn happy about that! ;-)
--Redwork--
24th January 2012, 10:44 PM
I'm amazed that has 0 bump steer.
It must be a total fluke because none of that looks right..
It appears the imaginary line from ball joint to lca bush is no where near paralle to tie rod end to end of rack.
And the length between those points are also wildly differnt..
Jordain
24th January 2012, 11:19 PM
I totally agree. I thought I would have had to Machine the rack down at atleast within 5mm of the LCA bush.... it's no where near parallel to the tie rod end. The tie rods don't even sit parallel to the rack.
The rack is exactly 85mm from the centre of the centre of the LCA bushings. NOTE: I had a AE86 crossmember in my garage, and these had the rack about 115mm behind, not 85mm. I chose 85mm for a few reasons, one being it suited what I wanted for ackerman better, and secondly the KE20 steering knuckles (108mm modified) are considerably shorter than AE86 (132.5mm) and AE86 p/s ones (115, 120mmish- can't remember exactly. Also, this way it doesn't put too much strain on the KE20 knuckles and rack ends when turning with lots of lock.
The Rack is 6mm ABOVE the LCA inner pivot point. Saying that another way is the centre of the rack ends are 6mm higher from the ground than the centre of the LCA inner pivot points.
AE86 racks are 7mm higher. So very similar. In my 1/2 scale drawings, this measurement seemed to make the biggest difference to any bump steer.
Quote from Rob ( Successful KE20 R&P conversion )
"Did 2 attempts. first one I shortened the rack by how much closer the LCA inner pivot points are in my design, but it didn't work. A lot of bump steer, possibly more than a standard AE86. But it was toe in on compression, not toe out. Yuck.
Fitted a spare rack bar I had (standard length) and brilliant! No bumpsteer at all in compression and the in the first 25mm of droop. Then slight toe out with more droop. "
NOTE: Without the 40mm RCA's it would still have no bump steer in compression at all, nor at least for the first 65mm in droop. But this isn't much good for roll centres, and understeer would result in hard cornering (due to tire scrub, not bump steer obviously). Besides, a bit of extra ackerman on the inside wheel in turns never hurt... check out the competitive IP cars like the front line escorts
http://www.rollaclub.com/board/uploads/monthly_02_2010/post-891-1267249663_thumb.jpg
It does have 0 bump steer. It does need a 40mm RCA though and I need to wind more camber in by making a set of custom struts.... Have to remove the Cast hub with stub and reset the strut tube with more King pin inclination angle............ :unseen:
Jordain
26th January 2012, 02:22 PM
Here's an update...........
http://www.ae86drivingclub.com.au/dcimages/521912.jpg
Recieved my $95 Delivered Alloy radiator
http://www.ae86drivingclub.com.au/dcimages/521913.jpg
Cooked a Beams rocker cover...
http://www.ae86drivingclub.com.au/dcimages/521914.jpg
Nah jokes just preheated it to about 50c then gave it a coat of wrinkly paint :cool:
http://www.ae86drivingclub.com.au/dcimages/521915.jpg
Made a tab for the radiator.. yes it will be rubber mounted.
http://www.ae86drivingclub.com.au/dcimages/521916.jpg
Chopped more of my car out :bash:
http://www.ae86drivingclub.com.au/dcimages/521917.jpg
Worked from 5pm to 1:30am this morning making that one part.... and did a few other things.
http://www.ae86drivingclub.com.au/dcimages/521918.jpg
Tacked in the drivers side
http://www.ae86drivingclub.com.au/dcimages/521919.jpg
Welded it in.
http://www.ae86drivingclub.com.au/dcimages/521920.jpg
Tadaaaa. I'm not sure if I like it or not. it looks to boxy/flat :fuzz:
Update later tonight :laff:
dying3k
26th January 2012, 06:38 PM
put some "speedholes" in there
xmoht
27th January 2012, 03:36 PM
put some "speedholes" in there
Speedholes ey? What keeps doin' that!
Seventy
27th January 2012, 05:43 PM
Not sure which side the oil filter is on, but you might need holes in for oil cooler lines
Jordain
28th January 2012, 12:11 PM
Oil filters on Passanger side. That's a good idea. I'm sure I will Fill it up... Might make a nice alloy overflow bottle, oilcooler out the front etc.... sort something out anyway!
Celica RA45
28th January 2012, 03:51 PM
so how did you go machining out the black top throttles to get 49mm butterfly.. and how did your inlet go that you made up ,was reading what you said to a guy on rolla mods,that was going to do a carby version of the beams
Jordain
17th April 2012, 11:06 AM
http://www.ae86drivingclub.com.au/dcimages/522145.jpg
Sold a KE10 to Luke
http://www.ae86drivingclub.com.au/dcimages/522146.jpg
Sold an Ma61 to a fellow Ae86dc drift nut haha!
http://www.ae86drivingclub.com.au/dcimages/522147.jpg
The car at its set ride height...
http://www.ae86drivingclub.com.au/dcimages/522148.jpg
slight poke in the front end department
http://www.ae86drivingclub.com.au/dcimages/522149.jpg
purchased a cheaper alternative to quads than Celica_Ra45's nice cast TRD copys.
http://www.ae86drivingclub.com.au/dcimages/522150.jpg
Jordain
17th April 2012, 11:07 AM
Not to much updates.... just waiting for my mate to finish building an rx3 so he can start working on my firewall as i'm to scared to touch it!!
I'm doing Mechanical Engineering!
http://www.ae86drivingclub.com.au/dcimages/522151.jpg
Pedal box.
http://www.ae86drivingclub.com.au/dcimages/522152.jpg
LEEN J160 shifter relocation kit
http://www.ae86drivingclub.com.au/dcimages/522153.jpg
Sleeping in the shed
http://www.ae86drivingclub.com.au/dcimages/522154.jpg
Set of 14x7j +13 reversies popped up so grabbed those and also grabbed a 'special' girlfriend haha
http://www.ae86drivingclub.com.au/dcimages/522155.jpg
Then a set of 14x7 0 and 14x6.5 +10 popped up so thought i'd grab those last night too...
http://www.ae86drivingclub.com.au/dcimages/522156.jpg
quick test fit
http://www.ae86drivingclub.com.au/dcimages/522157.jpg
chucked a 165/55r14 on the front and a Falken 195/45r14 on the rear
http://www.ae86drivingclub.com.au/dcimages/522158.jpg
Sat in garage for about an hour....... thinking about how i'm going to get rx7 AJPS brake kit under them http://www.rollaclub.com/board/public/style_emoticons/default/990-weird.gif NEK MINNIT.... decided the front wheels need new inner barrels made up without the SSR buldge.
Jordain
17th April 2012, 11:08 AM
http://www.ae86drivingclub.com.au/dcimages/522160.jpg
http://www.ae86drivingclub.com.au/dcimages/522161.jpg
http://www.ae86drivingclub.com.au/dcimages/522162.jpg
http://www.ae86drivingclub.com.au/dcimages/522163.jpg
http://www.ae86drivingclub.com.au/dcimages/522164.jpg
Jordain
17th April 2012, 11:10 AM
Well we had a good day. Sorted out suspension woe's out! I'm sure Luke's going to write up something on what we did http://www.rollaclub.com/board/public/style_emoticons/default/tongue.gif haha so here's a few pictures of what we got upto this weekend.
http://www.ae86drivingclub.com.au/dcimages/522166.jpg
Strut bender
http://www.ae86drivingclub.com.au/dcimages/522167.jpg
Luke thinking his cool....
http://www.ae86drivingclub.com.au/dcimages/522168.jpg
After a few months of having 2 passanger side 86 struts... i realised the day before driving 3 hours to Lukes... that I had 2 of the same struts... so drove all around sydney to picked up a few sets of 86 struts, ended up cutting down a set of struts at lukes to bend this morning.... New sleevekit and a shitload of parts are on their way for my front end!! Car will finally be complete in the front end department!
http://www.ae86drivingclub.com.au/dcimages/522169.jpg
just removing the dodgy sleeve kit.
http://www.ae86drivingclub.com.au/dcimages/522170.jpg
just played around with suspension today....
http://www.ae86drivingclub.com.au/dcimages/522171.jpg
consists of:
Cusco tops, cusco top perch, 8kg springs, wholesale bottom perch machined to fit springs, sleeve kit cut in half... 86 super short struts, 86 hubs, fc calipers, civic discs
undecided on shocks atm.... running TRD blues.
anyway sussssspension should be sorted in the next couple days. http://www.rollaclub.com/board/public/style_emoticons/default/cool.gif
ANYWHOOOOOOOOOOOOOOOOOO
Just waiting on AJPS package to arrive to bolt front end together. Firewalls booked in, in 2 weeks for Firewall, tunnel, rear tunnel, box cut into the rear floor for diff to sit into..
sundee
26th May 2012, 06:20 PM
last post was along time ago, what happened spend to much money on wheels? haha
thing is ace. nice little workshop you have there, hoist and all.
running yet?
Jordain
28th May 2012, 10:42 AM
Nah lot's of updates just forgot to update 86dc!
The car's not running... the car's currently at my mates workshop getting a firewall and tunnel put into it. I can't wait... it's going to take a few weeks but i got plenty time to wait.
i'll just dump a few pic's here :)
http://www.ae86drivingclub.com.au/dcimages/522268.jpg
Sold a KE10 to Luke
http://www.ae86drivingclub.com.au/dcimages/522269.jpg
Sold an Ma61 to a fellow Ae86dc drift nut haha!
http://www.ae86drivingclub.com.au/dcimages/522270.jpg
The car at its set ride height...
http://www.ae86drivingclub.com.au/dcimages/522271.jpg
slight poke in the front end department
http://www.ae86drivingclub.com.au/dcimages/522272.jpg
purchased a cheaper alternative to quads than Celica_Ra45's nice cast TRD copys.
http://www.ae86drivingclub.com.au/dcimages/522273.jpg
been tinkering with daihatsu's lately...
http://www.ae86drivingclub.com.au/dcimages/522274.jpg
coilovers
http://www.ae86drivingclub.com.au/dcimages/522275.jpg
Very fun little car.
ANYWAY.. got some pics of the Ke10
http://www.ae86drivingclub.com.au/dcimages/522276.jpg
ITB adaptor
http://www.ae86drivingclub.com.au/dcimages/522277.jpg
http://www.ae86drivingclub.com.au/dcimages/522278.jpg
http://www.ae86drivingclub.com.au/dcimages/522279.jpg
There we go. I'll upload more pics later when its all 100% bolted together
http://www.ae86drivingclub.com.au/dcimages/522280.jpg
http://www.ae86drivingclub.com.au/dcimages/522281.jpg
http://www.ae86drivingclub.com.au/dcimages/522282.jpg
So....
SSR mesh all round, or SSR mesh and SSR mk1's on rear? What should I do? Leaning towards SSR Mesh all round with white centres and polished lips.
I decided to go with MESHIES ALL AROUND....
but for engineering, I will run steel 14x5.5" chasers...
Hopefully running soon... Tailshaft is getting made, once the firewall and tunnels done i'll get all the brake lines sorted, hook up my wilwood pedal box... start bolting it together.
For the rear end, All i'm going to do is run the flattened and stiffened Leaf springs, run an adjustable panhard rod and that's all. Will see how bad the tramp is.... if its terrible i'll go triagulated 4 link yo!
cheers!
sundee
28th May 2012, 12:09 PM
i like the Mk2's on the rear and mesh up front.
let us know if you have any vibration issues with the 1 piece tail shaft... heard of a few guys having this issue.
Golden Circle
28th May 2012, 01:37 PM
mk1s alround. 13s.
Seventy
28th May 2012, 06:20 PM
Mesh alround, keep silver centres ;D
myke90
28th May 2012, 10:10 PM
so perfect, it had to be re-posted!!
http://www.ae86drivingclub.com.au/dcimages/522283.jpg
Jordain
30th May 2012, 09:33 AM
http://www.ae86drivingclub.com.au/dcimages/522284.jpg
picked up another pair of meshies... 14x7.5...... $200 with decent 185/55's! cheering. Get them sandblasted, polish DEM KRAZI LIPZ then paint the centres silver and i'm done with wheels for a while! I bought a pair of Wattanabe's 15x7 0 offset :')
sundee
12th October 2012, 11:57 AM
please tell me your rockin this KE10 at Raleigh?!!!!
blake.
12th October 2012, 12:08 PM
No way he will be, jordy you'd be lucky if you drive it this year, with the ke20, trailer and the spitfire on the hoist lol
john84ie
12th October 2012, 12:15 PM
This thing is hot! The meshies look sweet, but I agree with golden circle, some fat 13's would be awesome!
Jordain
31st October 2012, 10:38 AM
This thing is hot! The meshies look sweet, but I agree with golden circle, some fat 13's would be awesome!
http://www.ae86drivingclub.com.au/dcimages/500417.jpg
http://www.ae86drivingclub.com.au/dcimages/500418.jpg
14x9 0 offset 155/55r14 tyre... lol
dr1ft-pig
31st October 2012, 05:15 PM
fuck yes
lolwat
31st October 2012, 10:34 PM
4age ke20 to sit next to this :)
sundee
31st October 2012, 11:56 PM
fitment is perfect
dr1ft-pig
8th February 2013, 06:07 PM
whats happening with this??
lolwat
8th February 2013, 10:41 PM
he's being a retard kent, loosing his license in a 4age ke20, that gets a rebuild every week(just about no lie) instead of putting money into this
sundee
8th February 2013, 11:51 PM
Tard!
dr1ft-pig
10th February 2013, 12:29 AM
thats gay, do a skid, film it, put it here so i can be re united with the sweet sound of a beams
Jordain
11th February 2013, 08:46 PM
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/522649.jpg
As michael said... I've blown 7 4AGE Bottum ends and spat a shim on one somehow.... and wrecked 1 t50 haha
I actually worked on the ke10 today for a while.
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/504921.jpg
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/504922.jpg
Sorting the Kaizan garage adaptor out..... I had to turn it upside down, redrill all the holes and remove the insulator block... and angle it on a mill around 8mm down as it hits my cowling..
Will update some pics soon as I want to get the #### finished..
BOUGHT a 5k motor and a 5 speed box with a 32/36 webber to get teh KE20 back on the road unredlabbled and only a wetweather skidder haha... then i'll sell it off..
Bought an ls1 and a t56, sikky engine mounting kit for S chassis... bought an s14 too.... although its fucked. haha!!
HYROLA
16th February 2013, 03:57 PM
always the best cars
Jordain
1st May 2013, 03:58 AM
got the book thrown at me by the police in my ke20 corolla ( 4age 16v, ITBS, No interior, bucket seat, hydro handbrake, loud exhaust) and only TODAY nearly 4 months after getting caught drifting on the street i got charged in court. I was up for nearly everything they could possibly get somebody for drifting and being a hoon... and I got off with a neg driving charge. My mum passed away in febuary, I bought a TRX bluebird to do skids.... Now i'm more motivated than ever to finish my ke10.
Heres some pics of what's been happening.
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/507517.jpg
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/507518.jpg
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/507519.jpg
http://www.ae86drivingclub.com.au/dcimages/507520.jpg
SOOO i've learnt a lot. I've learnt how to powdercoat, ceramic coat, polish alloy.. I've learnt to become abit more of a perfectionist. I've been pumping out big hours on the 10 lately. I'm hoping to have it driving and registered in 3 months
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/507521.jpg
This is my bluebird TRX, Ca18det 272 cams 770cc inj gt3076r turbo hks gate hks manifold 3" exh external gate for making bitchs wet rb20 box h190 diff with bolts in it big ʞ©$ɟoff hydro handbrake bride seat full bonds rollcage... Street registered..
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/507522.jpg
ANYHOWWWWWWW
Ke10 time
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/507523.jpg
MA61 supra wheels fit nice.
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/507524.jpg
But sadly.... ITBS, BEAMS and J160's don't fit into ke10s nicely... figured i had cut everything else so might aswell cut more.... so out came the drill and grinder
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/507525.jpg
Cheers Guy S for helping me http://www.rollaclub.com/board/public/style_emoticons/default/smile.png
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/507527.jpg
made some room....http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/507528.jpg
NOW... the car currently has a hackjob of a radiator support... it's rubbish.. Dunno what i was doing a year ago.. actually dunno what I'm doing now lol
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/507529.jpg
Copying the same setup as this... flipped RX7 s1 radiator with a modified inlet and oulet.. Note the rad cap is on the top cast radiator pipe.
update sometime soon!
sam92
1st May 2013, 02:49 PM
Did I hear correctly that the bluebird popped?
sundee
1st May 2013, 10:32 PM
I love the description on the photo on the police rep.
Racing seat and harness , non standard... Stuff is that the worst he could do.
Cops should stop wasting tax payers money, chase crims not "punks"
If u get what I'm saying .
Get that ke10 going, beams looks good in their
lolwat
1st May 2013, 10:41 PM
I love the description on the photo on the police rep.
Racing seat and harness , non standard... Stuff is that the worst he could do.
Cops should stop wasting tax payers money, chase crims not "punks"
If u get what I'm saying .
Get that ke10 going, beams looks good in their
Quote
"engine must be standard, its has Toyota all over it"
KE20 twin cam EFI, bitch was retard
Jordain
27th May 2013, 06:50 PM
It wasted $4500 of my monies, TAX payers money... and the best cops could come up with was" Racing seat and harness , non standard".. For christ sake, what about the twin cam motor in the car with no Emissions on the motor, NO engineers cert... Like... UGH annoys the fuckin shit out of me.
The best part about it was the HWY patrol who came down to defect me said "engine must be standard, its has Toyota all over it"... I just face palmed and went along with it. Went to the pub across the road and had a laugh afterwards haha!
Yeah heard correctly.. Bluebird popped, I fixed it... popped it again.. Now ive given up... but ill chuck another CA in and do a few things to it... not put 20pound through it this time either.
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/508540.jpg
Mates 4ac Ae71 i been working on lately
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/508541.jpg
My miata too.. haha 14" <3
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/508542.jpg
ke10s nearly ready for a Greenboy Paintjob..
http://www.ae86drivingclub.com.au/dcimages/5/7/1/3/508543.jpg
got an exhaust done...
SO just need to get the bay painted, chuck everything back into it and get it wired and get the brakes done and shes ready for a drive... :)
sundee
27th May 2013, 11:37 PM
What colour you choose for it?
Candy pink with sparkles?
Flush-on-15s
28th September 2013, 12:18 AM
neeeeed a update!
drogs
13th October 2014, 04:32 PM
Are you alive Jordain?
fix your photo links
Is this car running yet?
Andres Vilar
10th June 2016, 10:41 AM
brother i need this kit, where can I get?
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.