Ke70 wagoooooooon baby.

[kyle unwin]

So a few months ago my ae71 got stolen :( and while I was waiting for my insurance money to come through I found this wagon for a great price and picked it up when I got the cash. It is a pretty clean car, just a little bit of rust that needs attention.

Engine:
Stock and fresh as 134xxx k's.

Driveline:
4 speed.
Exceedy heavy duty clutch..

Suspension:
Stock and soft.

Interior:
OMP wheel.
Some whack shifter that I found in the shed.
Cd player.
S13 SR seats.

Exterior:
Nothing at the moment.
Rust hole in the rear for reversing aerodynamics :D

Wheels:
Gz10 wheels, until I get some money for others.

Heres my old baby :(
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71509.jpg
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71510.jpg

I guess I can't grieve about the past, so here is what is in my driveway at the moment :)
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71511.jpg
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71512.jpg
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71513.jpg
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71514.jpg

Going to be a fairly slow build for the time being because I am jobless but yeah, enjoy!

This is how it currently sits.
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71515.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71516.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71517.jpg

[kyle unwin]

lol at the tape on the back.
Also I'm having problems with the carby I think. I'm driving along and it randomly splutters and then turns off on me. It is weird and has got my friends and I a bit lost. If anyone could help out that would be great!

[sam2306]

looks like a good base man, about the stalling issue give it a good clean with some carby cleaner, that might help

[kyle unwin]

Thanks buuddaaay. Yeah I've given the carby a bit of a clean, think I may go get some more tomorrow and do it a bit more thorough. :D

[Seventy]

That shifter looks like a fucking baseball bat!

[kyle unwin]

Shifter is f**ked, tooooo big hahahaha. Cops will love it :P

[kyle unwin]

I think I found the culprit why it's cutting out. The balist resistor or whatever it's called it buggered.

[E7 PIG]

mmmm Ma61 rims :)

[kyle unwin]

mmmm Ma61 rims :)
They are actually gz10 wheels, which I thought were ma61 wheels. Gay offset, 15x6 +20 Haha. :(
Sold them today and got back my longchamps from my ae71. Will post pictures soon :)

[kyle unwin]

soooooooooooooooooooooooo I lowered it today, and blimey it's low!
Check the phooootos.
I AM NOT REPPING THE STOCKIES, all I have for now :(
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71826.jpg
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71827.jpg
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71828.jpg
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71829.jpg
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71830.jpg

[sam2306]

what did you lower the rear with man?

[kyle unwin]

what did you lower the rear with man?
I put the second leaf from the top, on the top put the first one (longest one) after that and then flipped the bottom two. And then that flattened it out when the bolt was in and it was all tight. And it is like sooooo low. Took out the bumpstops and it's slapping chassy most little bumps. Hahaha. So good but bad.
You understand what I mean? Haha.

[sam2306]

yeh i get what ya saying. damn must ride like a sack of shit haha, get some reset leaves

[kyle unwin]

It rides nice dude, just need to add a leaf to make it stiffer and put cut bumpstops in heheh.
Its pretty fun haha.

[kyle unwin]

Hows yours going?

[Jacobxxx]

what shocks are you running in the rear? standard?
could always be a bit lower ;) haha

[kyle unwin]

what shocks are you running in the rear? standard?
could always be a bit lower ;) haha
Standard shocks man, what would you suggest? and I don't think it can really go much lower unless I notch the chassie :(

[Jacobxxx]

since leaf rear end already has smaller shocks id suggest running suzuki sierra shocks. Most people say they are too short for sedan unless you're super duper low but for wagons/panelvans i think they're a mint size!

Really? have a friend who was heaps lower and he just had to put up with diff slapping floor haha.

[kyle unwin]

Yeah dude, my diff is slapping the floor pretty much every bump, no bumpstops either. I guess I could go another inch lower, but I do like my licence ;)
Might get a pair then, these stocks shocks are pretty stiff at the moment, might just leave them for a while. Haha.
Got some wheels off my mate today, not the "flashest" but they look alright and do the job.
I'll get some photos up tomorrow when it's sunny!

[kyle unwin]

Got a flat tire today, damn freebee tires -.- I guess you can expect that to happen haha. Anyone got any secondhand 175/65/14's or something around that size that I can have? :D

[kyle unwin]

So nooo updates really to be stoaked on, I got rid of the stockies and my mate gave me some wheels for the back, I think they look preeeetty cool. What do you guys think?
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/178445.jpg
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/178446.jpg

[sam2306]

what size are they?

[kyle unwin]

Fronts are 15's and rears are 14's. :\

[Jacobxxx]

Looks awesome man! lower the front to match, and hurry on getting another pair of champs!

[kyle unwin]

Yeah I think I might just leave the front how it is, and save for some coilovers. Either that or just cut another half coil or something. :)
Ehh, A guy is selling 15 x 7.5 -5 champs on here for $650, wishing I had the cash :(

[kyle unwin]

Nothing exciting as of late. Changed the fuel pump, that was my problem. That's all.

[kyle unwin]

Got roofracks for this badboy yesterday, I'll get some photos up tomorrow ;)

[cooter]

+1 for the super low and bmx. lol sucks ur 71 got pinched. how id u get the wheels back?

[kyle unwin]

+1 for the super low and bmx. lol sucks ur 71 got pinched. how id u get the wheels back?
Wooo! Ummm the guy that stole it, sold the wheels to a guy on this forum for some bullshit cheap price, and he posted them up for sale again and yeaaah. Easier to explain in person hahah.

[cooter]

So I guess u know who stole it then ey?

[kyle unwin]

Yes, that I do. Police haven't done anything about it yet... obviously. Assholes.

[lolwat]

so guessing you have "spoken" very "kindly" to the "gentlemen" that stole it then

[kyle unwin]

so guessing you have "spoken" very "kindly" to the "gentlemen" that stole it then
I have not had the chance yet. I will be saying some "kind" words to him in the near future though. :D

[lolwat]

kindly chat in the gutter would be good

then piss on him, he will be mad pissed off, he will be covered in piss and relised what a small dick he has

[kyle unwin]

kindly chat in the gutter would be good

then piss on him, he will be mad pissed off, he will be covered in piss and relised what a small dick he has
Hahahaha I like this! Great idea!

[kyle unwin]

Just a really shit picture for now, until I can be bothered taking proper photos. Like the roofracks?
20442

[kyle unwin]

Got a speeding fine tonight, fuck yeah -_____- 3 points and $200. Think I might attach my speedo cable haha.

[Jacobxxx]

Didn't even know a 4k could speed, although your car is red.

[kyle unwin]

Neither did I, even I was shocked. Red adds +2 horsepower. hahha.

[kyle unwin]

Ahhh aquired some chrome bars off my friend for $50, ordered some end caps. Now I just need to apparently make some mounts for the rear bar for my wagon.

[Jacobxxx]

weld it to the chassis

[kyle unwin]

Hahah so should! Ordered my endcaps last night also, so hopefully not too long. Wanna get these on asap!

[kyle unwin]

Okay so I got my endcaps today from Malaysia, the stupid fella gave me 2 rear rights, a rear left and a front right. No front right at all. But luckily a rear right works as a front left for now...
Only got to put the front bar on today because I haven't had time to make rear mounts for the wagon. Got a shitty picture just for now, I'm no good with photo taking, way too lazy. Also painted my roofracks. Mounting of the bar is pretty dodgy, was too hot today and I was too lazy to do it legit, just a slight angle but ohwell.
Enjoy the shit picture.
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/226877.jpg

[kyle unwin]

And here is a photo after a little Touge run we did tonight. :)
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/226927.jpg

[Jacobxxx]

Did you still want extractors? haha
Car looks goooooooooooooooood!

[kyle unwin]

I do yes, I just need to make a day out of it, going down there and getting them. Facebook me and we can organise something. :)
Thanks duuude.

[Mika]

I want a wagon also now, after seeing the quality wagons on here. Looks sick dude!

[kyle unwin]

yeeeeew, get one man! Thanks heaps :)

[kyle unwin]

Holy shit I need money -.-

[kyle unwin]

So yeah, just realised the endcaps I ordered for the rear bar are different for wagons, they neeed to be alot shorter. Might just sell the rear bar and not run one.

[haveaparty]

im not gunna run a bar on my pano. was gunna try and make a roll bar sort of thing like the mini truckers do

[kyle unwin]

Yeah that's it, I actually like them better without the rear bar. Might just sell it haha.

[kyle unwin]

Mate took this cute little photo while I was putting my I <3 Sluts sticker on. Yet again it's shit phone camera quality, hope you didn't get too excited :D

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/230490.jpg

[kyle unwin]

Can someone change the name of this thread? Like a Moderator? Thankyou.

[kyle unwin]

Just to, Red Ke70 Wagon. Or something. thanks,
Oh and more longchamps will be aquired soon! :D

[Jacobxxx]

Nah i like the name, it stays. haha

[kyle unwin]

Damn you to heck! No more xr4s to make you happy then! :D

[Jacobxxx]

I'm not the one rolling around on steelies stealin' all my 4k powahz. Lower front more too plz!

[kyle unwin]

They are actually boat trailer wheelz... Front will be lower once I get coilovers, cbf fucking with the springs..

[Jacobxxx]

What size are they? Want for skidderz

[kyle unwin]

They are like 14x7ish. You want them for Matsuri?

[Jacobxxx]

Quite possibly! Come up and ill take you for passenger?

[kyle unwin]

I don't think I can hey. Working Saturday and Sunday. Looovvin' life!

[kyle unwin]

Some photos...
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/244200.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/244201.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/244202.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/244203.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/244204.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/244205.jpg

[Jacobxxx]

get a tacho dashhhh

and madhouse lip ;)

[kyle unwin]

Trying to find a tacho dash, and I'm pretty keen on the lip hey! After rego.

[Seventy]

Simple and cool

[kyle unwin]

Thankyou sir :D

[declan]

this thing is so cool

[kyle unwin]

Thanks man :) It's getting there. Longchamps will be arriving this week hopefully! And getting quad lights next Tuesday. :)

[kyle unwin]

Here are some pictures from the Hardtuned cruise lastnight. Whooole lotta hardparking :P

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/244622.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/244623.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/244624.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/244625.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/244626.jpg

[kyle unwin]

...

[ke_70_blue]

lovin the wagon

[kyle unwin]

Thanks mate!

[kyle unwin]

So longchamps should be arriving on Monday.
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/244724.jpg

[dbr11k]

forgetting something kyle ?

[kyle unwin]

Forgetting something? I dunnnoo am I? >.<

[dbr11k]

starts with Q ends in QUADS :D

[dbr11k]

double post :/

[kyle unwin]

Oh yuussss. Paying for them on Tuesday. Me sah haapppiesss

[haveaparty]

pretty sure ive got a photo of this car from the jdmst meet

[4DRFRK]

pretty sure the owner of this car loves hard pole ... nice roofracks faggot steal them off a beemer or someshit :P MUCH LOVE MR ONION

[kyle unwin]

pretty sure ive got a photo of this car from the jdmst meet
Oh really? Poor camera.. haha :D
Any chance you could find it and post it up man? :)

[kyle unwin]

pretty sure the owner of this car loves hard pole ... nice roofracks faggot steal them off a beemer or someshit :P MUCH LOVE MR ONION
I love so much hard pole, ofcourse the Beamer was a piece anyway...
onion? Garlic more like it faggot.

[4DRFRK]

bitch the beemer lived a hard limiter bashing sideways lifestyle till the diff and engine decided it had enough that #### used to ride the wall like a boss and had the quarter slaps from the point markers at beechmont to prove it it also ended up in a ditch in worongary at one point ... I LOVED THAT CAR AND YOU WILL NOT TALK BAD OF IT EVER

[kyle unwin]

haahaahhahahahahhahha fuuuuuck yes. Okay I am extremely sorry that I spoke badly of it and I will never do so again.
Sorry sir.



NAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHHHT

[4DRFRK]

Your mother is a whore caps lock

[kyle unwin]

caps lock yourself ####

[haveaparty]

This look familiar

[kyle unwin]

That's it! With the ewwwy front bar :)h
haha

[4DRFRK]

i liked it mnore when it lived in my street and i got to see it everyday .... now i only see it when i get new things and you come check them out :'( will have alot of the ae86 painted this week come check it maybe sunday ?

[kyle unwin]

Awwwwwww :( Yeah I'm not working Sunday so I'll come around sometime during the day :)

[kyle unwin]

Longchamps came today, so I did a quick dodgy rear roll which ended up in a flare... haha
Pictures;

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/245816.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/245817.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/245818.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/245819.jpg

Quad lights should be here early next week too. More reason to be happy.

[kyle unwin]

And I need to get my front wheels polished..

[4DRFRK]

we should mack

[Dazzla86]

hmmm champs, chrome front bar, quads...... ur not painting it yellow next are ya hahahaha

[kyle unwin]

Hahahhhahhahaha Darren! Neverrrr I love my yellow. You're just copying my dream ;)

[wagoooon]

looking good need to get my wagon this low now haha

[Seventy]

darrens living the dream haha

[kyle unwin]

Yeah Seventy hahaha. So jealous.

[Dazzla86]

nawww! its looking really good kyle liking it alot :-)

[kyle unwin]

Thankyou maaan. I'm actually stoaked as on how it is looking :)

[kyle unwin]

Quadlights should be here in 2 days if Aus Post aren't fuckwits.

[4DRFRK]

did the quads come ? please say yes ... i has front wheels for sprinkler coming next week ... WINNING

[4DRFRK]

Quadlights should be here in 2 days if Aus Post aren't fuckwits. would help if i didnt load the thread 3 hours ago FML

[kyle unwin]

HAHAHAH nooob.

[kyle unwin]

Here we go guys! :)
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/248356.jpg

[haveaparty]

yeah boy. wat a rig

[Jacobxxx]

Sell me this so i can re shell into it

[haveaparty]

just spotted this parked outside the swimmimg pool on gold coast hwy. looks boss man

[4DRFRK]

looks good ... needs more low , low that can only be acheived with 14"s

[kyle unwin]

just spotted this parked outside the swimmimg pool on gold coast hwy. looks boss man
Yeah I gotta park over there every day as I work at the bike shop, haven't got a parking ticket yet, waiting for the day :\

[kyle unwin]

Sell me this so i can re shell into it
I'll sell it for one thousand dollars.
Times 4.
I want blood money for a coke can. ha

[kyle unwin]

looks good ... needs more low , low that can only be acheived with 14"s
Fuck 14's, 15's look the goods in my eyes :D
Or find someone to buy them then I'll purchase 14's.

[Jacobxxx]

Ill swap you a soarer, you can keep your wheels ;)

[kyle unwin]

What model soarer? :o

[Jacobxxx]

gz10

[haveaparty]

Yeah I gotta park over there every day as I work at the bike shop, haven't got a parking ticket yet, waiting for the day :\


Oh true. So I'll proly notice it every time I pass there now haha. Will hav to stop in one day and talk smack/ u fix my bike hahaha

[kyle unwin]

It's a beautiful sight to look at when you drive past hey ;) Every 10 minutes I walk out and just stare at it for a little. My boss thinks I'm weird hahaha.
Yeah come in one day, I'm keen for a shit talk and free bike fixing!

[haveaparty]

Yes it is a beautiful sight lol. I spotted it from ages away. Then wen I seen the quads new it was urs cause I seen the thread like 5 mins before haha. Looks good on the long champs too. Just needs bit more poke IMO

[kyle unwin]

:D poke hmmm, might run 10mm spacers all round? or what do you think.
Don't want it to be too out there for a daily.

[kyle unwin]

Pictures from JDMST. Didn't have time to put quads on before the meet so not worth looking at :(
Hardparking Central;

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/248391.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/248392.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/248393.jpg

[Zane k]

Looks amazing dude.

[haveaparty]

the front fitment is pretty good. put like 20mm spaces on the back with a slightly stretched tyre, would look good then. ive got some 15x10 neg 26's to try and fit to the back of my panel van. pretty sure ill be doing some guard work haha

[kyle unwin]

Looks amazing dude.
Cheers man :)

[kyle unwin]

the front fitment is pretty good. put like 20mm spaces on the back with a slightly stretched tyre, would look good then. ive got some 15x10 neg 26's to try and fit to the back of my panel van. pretty sure ill be doing some guard work haha
They have 185's on the rear might try 175 for lols. I might just do 10 mm spacers coz I HATE the rear guards, they are such a c**t to play with.
Yeah man, you are gonna have some fun there! Hahahahaha

[haveaparty]

i can help ya work ur guards if u need a hand, i was a panel beater in my previous life (previous job lol) not sure if i wanna go the bolt on flair look or weld on bigger ones to cover the wheels.

also, didnt spot it on my drive past this time, get to work slacker haha

edit: my by 10's hav 195's stretched on them lol so does my by 8's. how wide are urs

[kyle unwin]

I'm not working today! Your day will not be complete now hehehe.
Yeah dude that sounds sick, I'll fix your bike you help with guards ;)
Most people usually just weld ke70 front guards onto the rear, it looks sweet tooo. I'd go fronts on rear and not bolt ons, thats just my opinion though.
My wheels are only 15x7 0 and 15x 7.5 0. Nothing special, happy with them for a daily though :) But yeah spacers might be a good idea.

[kyle unwin]

Will get bigger wheels when I can afford them hahaha.

[haveaparty]

ill hav to come down one weekend and play cars together, ill bring my bike to haha. ive got some 10 or 15mm slip on spacers here ill bring for shits to see wat they will look like. and ill bring some of the other rims to see how crazy they will look for shits n gigz. will also give me an idea on how much work ill need to do on my panel van to make them fit

[Seventy]

Needs a madhouse lip!!

[4DRFRK]

DO NOT madhouse or chin lip this car ..... I will come to your house and smash it off with a cricket bat STRAIGHT UP WILL RUIN IT ITS HOT AS IS SPACE REAR WHEELS AND FORGET VISUAL MODS

[Jacobxxx]

Nah definitely needs a madhouse lip.

[Jdm-Mcc]

DO NOT madhouse or chin lip this car ..... I will come to your house and smash it off with a cricket bat STRAIGHT UP WILL RUIN IT ITS HOT AS IS SPACE REAR WHEELS AND FORGET VISUAL MODS

Spacing out rear wheels is a visual mod.

[Jacobxxx]

Your face is a visual mod

[Jdm-Mcc]

Ill visually mod your face with a wrecking ball

[Jdm-Mcc]

PIMP YO FACE

[4DRFRK]

Spacing out rear wheels is a visual mod.Aware of this I am, Generally typing is done in chronological order so by me saying "Space rear wheels and forget visual mods" what is being said is "FIRST space the rear wheels THEN forget about visual mods" At the end of the day Onion this is your car and you will do what you want but keep it simple. It looks tight as it is why mess with it and risk over doing it. But hey like i said its your car and your choice but you should listen to me because im older and heaps cooler than you and a better bmx rider with even cooler looking hair and im not fat like you oh and my girlfriend is heaps hotter than yours.... COME LOOK AT MY CAR - No one has pissed in my pocket all week and my motivation is lacking therefore you should come and do so

[Jacobxxx]

I think you'll find my name is actually in red writing so not only am i awesome, but i am one with the red corollas. Madhouse lip/chin spoiler would be cool

[4DRFRK]

Red writing ... The wraith has been felt my ideals and Opinions have been laid to rest and I have boarded the Train to madhouse town On a side note Kyle i just got off the phone with the boss Working all weekend FML ... So dont come look at my car :'( no works going to get done on it anyway

[kyle unwin]

ill hav to come down one weekend and play cars together, ill bring my bike to haha. ive got some 10 or 15mm slip on spacers here ill bring for shits to see wat they will look like. and ill bring some of the other rims to see how crazy they will look for shits n gigz. will also give me an idea on how much work ill need to do on my panel van to make them fit
Sounds great man, I usually only have Sundays off, so I guess a Sunday will have to do, haha.

[kyle unwin]

I've actually been contemplating a madhouse lip. I dare someone to photoshop it for me because I am fat and lazy. Then I'll have an idea. :D
My mates ordering one 310 posted cbf paying that much, but ehhhh.

[4DRFRK]

I am fat and lazy. . This you really do need to do something about your wieght dude

[kyle unwin]

I'm 6"3 and weigh 82kgs. I need to get down to atleast 60 zomg.

[Jdm-Mcc]

I hear pecky is doing madhouse lips cheeeeeeeeeeeeeap

[kyle unwin]

He better be, I aint heard nothin'.

[Jacobxxx]

madhouse lips = cool

http://27.media.tumblr.com/tumblr_lt5ppu8vnt1qgkjnno1_500.jpg

[kyle unwin]

Only with a cool car like yours.
Are you willing to sell me one? :D

[4DRFRK]

i thought you were atleast 120 kg dude

[kyle unwin]

i thought you were atleast 120 kg dude
lul

[haveaparty]

Sounds great man, I usually only have Sundays off, so I guess a Sunday will have to do, haha.

Yeah man. Sounds good to me

[kyle unwin]

Sweeeeeet as dood. Hit me up the next Sunday you are free :D

[haveaparty]

Yeah should be. Depends how motivated I'll be to work on my panel van haha

[kyle unwin]

I'll make you motivated! Or else.

[4DRFRK]

come options you dirt squirt

[kyle unwin]

lul I has work tomorrow.

[kyle unwin]

oooo found some photos that Streekarnage took.
Here we are;

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/249143.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/249144.jpg

He said the first photo was his favourite of the night ;)

[4DRFRK]

once my car is done can we please make a rollpan for this

[kyle unwin]

Okie pokieee

[kyle unwin]

My engine is idling all over the show :\
vaccum hose?

[haveaparty]

ill take a roll pan wen u make his,

[kyle unwin]

:D what camera have you got?

[haveaparty]

me?? my phone haha, but i do hav a shitty 300 doi special form harvey norman but lost the cord to put the pics onto a computer

[4DRFRK]

:D what camera have you got?some canon SLR thing i have never even opened

[kyle unwin]

:O gimmie!

[4DRFRK]

:O gimmie! PURCHASE !!! Also are you coming for a drive tonight? meet at usual wednesday spot at usual wednesday time heading to usual wednesday location

[kyle unwin]

7/11 9:30 hills?
If only my headlights weren't playing up :(

[kyle unwin]

Lately, nothing exciting has happened with the wagon to get excited about.
Took my friend and his partner to formal this week, got a few pictures before I took them. And also a couple of photos from this months JDMST.
Enjoy;

Formal:
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/253545.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/253546.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/253547.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/253548.jpg

JDMST:
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71515.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71516.jpg

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/71517.jpg

Also deciding whether I should go all out with a 4age, or just get a 5k-c for now?

[Jacobxxx]

4age

[kyle unwin]

Okay -___-'

[haveaparty]

4age conversion would be easy as. Get all the gear and I'll help ya. Would take like a weekend if everything goes smoothly

[kyle unwin]

Okay sounds loveeely. Now help me find the gear! ahhaha.

[haveaparty]

Hahaha. If ur got the moni ill help rummage the shit up. First thing to look for will be a pedal box and all that gear. And a ae crossmember.

[4DRFRK]

Hahaha. If ur got the moni ill help rummage the shit up. First thing to look for will be a pedal box and all that gear. And a ae crossmember.
seriously kyle go wreckers buy 7k build it one your on your p's and two the market for said cars is p platers stamp 7k with 4k numbers and profit

[Jacobxxx]

Nah 7k is a waste of time, 4age conversion.

Have 3/4 of the bits sitting in my friends shed for it

Tail Shaft
Gearbox Cross member
Engine Cross member
t50

Buy engine and pedal box it's done!

[CRO747]

dont waste time with k engines i did and regretted it so much

[haveaparty]

hurry and find that shit so we can get started already lol

[kyle unwin]

Nah 7k is a waste of time, 4age conversion.

Have 3/4 of the bits sitting in my friends shed for it

Tail Shaft
Gearbox Cross member
Engine Cross member
t50

Buy engine and pedal box it's done!

How much do you want for that stuff doooooood?

And yeah I was thinking about a k engine but fuck it I think I'll just go for a 4age :D more funzzzzzzz
Find me a pedalbox and 16v Brett! Then we can get shit done!

[haveaparty]

Lol. U had a ze but sold it hahaha. I'll keep an eye out for ya

[kyle unwin]

Mmmmmmm ze :D
Just got myself a tacho dash for 20 bucks. Winning :D

[haveaparty]

How much are they usually. Cause I'll sell mine for that much

[Jacobxxx]

Shotty

[kyle unwin]

Ergh pecky go away it is mine and I'm getting it tonight :D

[haveaparty]

200 doi :D

[kyle unwin]

50 :)

[kyle unwin]

So...

[kyle unwin]

Front lip? Yeah?
http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/254920.jpg

[haveaparty]

Um yes!!! And taco dash for 100 if u want it.

[kyle unwin]

$100 is a bit exxyyy. :(
$70? :D

[haveaparty]

How bad do u want it haha. Cause I really need 100 doi for these engine mounts lol. Stoopid cars taking all my monis haha

[kyle unwin]

Yeah not that bad >.<
Might be buying 4age within the next couple of weeks. :O

[haveaparty]

Save ur monis for 4age goodness. Dont need a taco dash yet hahaha.

[kyle unwin]

I already have a tacho dash >:) All my monies are going away for it. D:

[haveaparty]

Good man. Now u just need a pedal box. Good luck finding one of those lol

[kyle unwin]

Package comes with pedalbox! :D Winning.

[haveaparty]

fuck yeah. keen to help get this on the road, u got all the equipment to do the engine conversion. cause i do :P

[kyle unwin]

Okay well I'll have to come over one weekend :D
Have you done a 4age conversion in a ke70 before?
How are you with loom wiring?

[haveaparty]

I done it in a sprinter and a ke. I wired a standard computer to the sprinter and got it going and done a Microtech to my old ke. But never got the ke going. If you've got the room to do it I can bring all the shit to u. Oh and with the wiring. It hasn't been mauled has it. Once uve got everything I'll come round and hav a look at it all. And check out the loom. If I can score a Saturday off work. I recon if we start Friday night. I'll have it done by Sunday arvo. As long as it all goes smoothly. Wat radiator u using and all that. Checking this to read ur replies is raping my data lol here's my number. 0417190689

[kyle unwin]

He said it's an "uncut" loom so I guess it's okay? It's got a brand new alloy radiator.
Ill PM you what it has..

[Sprinter Freak]

yess, keen to see this with a 4age in it :)

[kyle unwin]

Me tooooo! Argh.

[kyle unwin]

So today I bought a silvertop 16v smallport 4age, and basically every bit that I need for the conversion. The only thing I need is the fuel system.
I'll put up a list tomorrow morning of what I purchased.

[haveaparty]

I got the surge tank setup remember. But urs will run off just a fuel pump for now anyway. Next thing to get are those belts and the seal for the gearbox.

[kyle unwin]

Yeah man gonna get onto that next pay day :D

[haveaparty]

Sweet. Dont forget that u will need all new oil for everything to lol. We'll make up a check list before u start to make sure it all goes smoothly :)

[kyle unwin]

Hahah yes yes I know. I'm gonna write one up tonight.

[haveaparty]

U will still forget something lol. Will be something u dont even think about until u need it. This happens to me alot hahaha. Even wen I do make a check list lol. After u right it up txt me it and I'll hav a look to make sure u didn't forget nothing :)

[killabeez_1985]

I gave him enough gear oil for the gbox.

Shopping list:
O2 sensor
Timing belt
Engine oil
Coolant
Bolts for a few bits

[kyle unwin]

Cheers dude, got myself a VL fuel pump today for $50 too.

[kyle unwin]

Not much of an update lately. Just getting my 4age stuff sorted. Will get pictures of it soon.

[kyle unwin]

Sneaky little shot because I need to update something...

http://www.ae86drivingclub.com.au/dcimages/1/8/9/2/263849.jpg

[haveaparty]

Wat the fuck is a ke70 combination switch

[kyle unwin]

Wiper/indicator switch that sits behind the steering wheel. IDIOT!

[haveaparty]

oh hahahahaha. kinda makes sense now -__-

[kyle unwin]

:D It makes complete sense.

[s13 james]

looks so cool

[kyle unwin]

Cheers homie :)

[bigm]

seen u driving through nerang the other day

needs more low :)

[kyle unwin]

More looww? Maybe in front, but rear is gonna be diff on chassie if I take bumpstops out. C notch? hahaha

[Vaughn]

Looks mintyyy, nice and clean :)

[bigm]

id be keen for notching.

or maybe needs smaller wheels? what are specs

[kyle unwin]

Lets notch away then!
They areeee 15x7 +0 and 15x 7.5+5.
Maybe 14's?

[kyle unwin]

Looks mintyyy, nice and clean :)
Thanks buddy :)

[declan]

14s and more low!

[Seventy]

deffinantly needs 14's

[kyle unwin]

But guyssssssssssssssssssssssss everyone runs 14"s. 15"s are different, but yeah I need more low :(
14" longchamps? watcha thinkkkk

[Jacobxxx]

15's are too big

Run 13's

[declan]

13s are ultimate but very few people pull it off properly.

i had 14inch XR-4s on my wagon, looked good.

[kyle unwin]

Yeah completely agree with you on that one Declan.
Have you got pictures of it? I'm keen to get some 14inch one now :)
See how 13inch go, there are some mk2s for sale 13x8. hmmmmmmm

[kyle unwin]

So I lost my licence, well losing it on the 6th of January. Gonna take the 3 months with no licence and put the 4age in, fix the rust properly and properly fix the suspension. It does suck but it kinda helps me out in a way.

[Crowie55]

and paint it the factory dark blue...

[4DRFRK]

kyle baby ... never take 3 months youll hate yourself by the end of it i ALWAYS REGRET IT ...... However i have motivation for my 86 for the first time in like months :)

[kyle unwin]

Yeaaaaaaaaaaah Crowie! Will do :D
FINALLY DAN, IT'S ABOUT TIME

[4DRFRK]

Yeaaaaaaaaaaah Crowie! Will do :D
FINALLY DAN, IT'S ABOUT TIME i got drunk ... when i get drunk i get shit done need to aqcuire brides so i can build the rest of the cage (by I i mean PHABRICATION PHIL)

[declan]

only real pic i have of it on the XR4s

http://www.ae86drivingclub.com.au/dcimages/2/3/3/6/271549.jpg

[kyle unwin]

I love it! :D

[lundy02]

i like the picture of me holding my front lip on your car hahaha

[4DRFRK]

i picture myself with kyle ;)

[kyle unwin]

I like cake.

[4DRFRK]

its spelt caek faggot

[kyle unwin]

Stfu. :(

[4DRFRK]

HTFU

[kyle unwin]

make meh

[kyle unwin]

Not a lot of an update... still. 4age is still sitting there collecting dust. I'm losing my licence on the 2nd of February, so once I do then the work will get started. I really can't wait.

[4DRFRK]

buy my detachable $50 TONIGHT

[kyle unwin]

Detachables can suck my d**k.

[wagoooon]

seen your wagon at south port last week when i was up on the goldy ! loooks fuckin shweeeeeeet

[kyle unwin]

Yeewwww cheers man! Shoulda popped in and said hi!
I can't wait for this 4age to go in.

[wagoooon]

yea aye will be bangN when the 4age goes in ! yea i didnt know were you worked aye haha i wana drive mine up to byron bay this year.

[kyle unwin]

Yeah gonna be good :) hahaha all good man!
Drive to Byron for what? When you come up I'll come down and check it out.