PDA

View Full Version : need help to check for short circuit



tauhu86
20th February 2009, 08:23 PM
My ST162 3sge has a short which i couldn't find where the problem is. It doesnt burn the fuse, it's just draining the battery slowly.

Anybody here who's good in automotive wiring that can give me a hand? or if u guys can recommend a shop that'll not burn a hole in my pocket that'll be great. Thanks.

slide86
20th February 2009, 09:12 PM
you need a multimeter that can read amps.....

to do a current draw test

1) remove the negative terminal

2) add the multimeter in SERIES with the neg terminal and negative battery post

3) set the multimeter to AMPS and monitor what the reading is

4) after 5 mins there should be no more than 0.07amps

if it is anymore, go through the fuse box and pull one fuse out at a time, when you see the amps drop to almost zero, the circuit you jst pulled out will be the one that is draining the battery. ie

- 2 amps indicated on multimeter
- remove radio fuse
- amps drops to 0.03 amps

therefore the radio circuit is drawing the current

H8CHIR6KU
20th February 2009, 11:22 PM
^^^ fucken bang right there:thumbup:

but if it was a newer car i would leave it for more than five minutes