PDA

View Full Version : just bought 14x7 0 offset centrelines for my ksev and....


scott_22
28th February 2009, 04:45 PM
my wheel studs arent long enough to bolt them on. what do i do?
Juturna
28th February 2009, 04:47 PM
get countersunk wheel nuts.
scott_22
28th February 2009, 04:49 PM
cheers big ears
Eircamae86
28th February 2009, 06:48 PM
Longer ones can be got from Toyota & other outlets
Simon-KE70
1st March 2009, 03:40 PM
yes but this kind of wheel requires different nuts to normal ones.
Hokey
1st March 2009, 03:54 PM
need to run mag nuts. if you use standard tapered nuts on a wheel that isn't made for them you'll damage the wheel and the nuts are also likely to loosen resulting in your wheel falling off.

it's one mistake you don't make twice haha
Javal
1st March 2009, 05:02 PM
need to run mag nuts. if you use standard tapered nuts on a wheel that isn't made for them you'll damage the wheel and the nuts are also likely to loosen resulting in your wheel falling off.

it's one mistake you don't make twice haha
Yeah. This.
dr1ft-pig
1st March 2009, 10:44 PM
yo scott did u get that carb i sent?
Hen may possibly be a nut
2nd March 2009, 07:23 PM
Google "Nice Products" and downloads their wheel stud and nut catalogue. Find a nut that suits, order 16 (get 20 actually, just so you can lose a few) of them through Repco/elsewhere.

Or go to a wrecker and try and find a Toyota with old style mags on it and steal it's nuts.

Hen