good exhaust shops in SE burbs

[Nic19]

hey guys im gonna need a full exhaust made for my sr20 ke70, dump needs to be made nice n tight as firewall clearance is tight. want something decent and as cheap as possible. im in Lilydale area but dont mind travelling around a lil
cheers
nic

[shift_rook]

place called ferndale in ferntree gully
or pm hokey(calvin) his bro did my mate exhaust, seems to really good...

[Sprinter86]

Unique exhausts in bayswater, barry street will look after ya! if ure nice, he may let u check out his collection of mad cars also, love his 1ggte celica!

im a lilydalian myself :P

[DRFTR86]

im gettin my exhaust on my daily done at exhaust city cheltenham, got quoted $1000 for 3inch turbo back with hiflow cat, 2 mufflers and a resonator, not bad, maybe hes worth a try, cant vouch for his work yet, every where else quoted me about $1300

btw that was a qoute for an r31

[julzy]

Ringwood preformance exhaust,
done two cars through him, mega cheap! 300 for extractors back!
With muffler and resonator.

[ae86]

so whole exhaust system for 300?! cheap as!
was it over diff ? you know if he can raise exhaust systems?

[Hokey]

ae86: do you need yours modified?

[blacktopspirit]

the place next to Boronia Panel beater in Ferntree Gully, I have no idea what there name is, but he was the only guy that could fix my exhaust after 3 recommended places failed miserably, he charged me 4 cans of turkey!

[ae86]

i need a whole new setup, plus i need it raised cos my exhaust system scrapes on speedhumps

[adam]

Dandy Exhaust, they're in Dandenong. :DD

Got my exhaust made up by them, 2.25" extractor back over diff with two mufflers for about $300 I think it was. Tucked up nicely and doesn't sound too bad either.

[ae86]

well im down westside so i want something not too far, fkn fuel to get to dandy n back would end up making it a fair amount more.

[Nic19]

might try calling a few of these places. should i run it under diff or over? its going to be fairly low car!

[carbonae86]

hey guys im gonna need a full exhaust made for my sr20 ke70, dump needs to be made nice n tight as firewall clearance is tight. want something decent and as cheap as possible. im in Lilydale area but dont mind travelling around a lil
cheers
nic


You might want to look at adding clearance or boost issues might be heading your way :S

I second unique exhausts as they can just pop into the cnc bender around the block for $10 mandrells or complete one piece systems copyed

[Nic19]

might get the sledgy out eh. got quote through a mate for 550 full turbo back 3" with muffler and resonator. its exhaust fix in lilydale. dont expect same price but work is top quality.

[yoshimitsu9]

Ringwood preformance exhaust,
done two cars through him, mega cheap! 300 for extractors back!
With muffler and resonator.

yeh, +1 for them had my exhaust done a few times with them (not due to shit jub, but making it quieter) make sure you get matty or steve to do it. with matty he doesnt know what "quiet" means lol

[Water Boy]

Ringwood preformance exhaust,
done two cars through him, mega cheap! 300 for extractors back!
With muffler and resonator.

Yeah ditto one of the blokes there is an ol skool Rolla nut. Rock up in overalls say youré in the trade and get cheap :D

[Water Boy]

Dandy Exhaust, they're in Dandenong. :DD

Got my exhaust made up by them, 2.25" extractor back over diff with two mufflers for about $300 I think it was. Tucked up nicely and doesn't sound too bad either.

Yeah have seen some nice work out of there. The owner there in the 90's was a mad rally driver... But unfortunatley he passed away RIP.

[JDM_KING]

well im down westside so i want something not too far, fkn fuel to get to dandy n back would end up making it a fair amount more.

what about st albans Exhaust ????

[Mr Fujiwara]

my car is extremely low and i got myself an exhaust from trufit in Moorabin, on Warrigal road.
its a 2 1/4 inch extractors back under diff, sits so nice and high its really well done, and it sounds really really tuff! check out my members ride if you wanna see the ride height, doesnt scrape on anything either.

btw resonator and muffler (they're 2 1/5 inch with the 21/4 pipe in it, it seemed to work very well and they seemed since it was only $300 it would be giving it the best performance for the cheapest price.

really good stuff worth a call

[AE092]

Does anyone have the contact number for Dandy exhaust? Looking at having a mandrel bent system made up

[adam]

Dandy Exhaust
104 Cheltenham Rd
Dandenong
VIC, 3175
Australia
Ph: (03) 9794 7632

http://www.yellowpages.com.au/displayads/908/472967314_Y4004908_V00Y_24_96.gif

[AE092]

thanks man

[lovemy86]

the place next to Boronia Panel beater in Ferntree Gully, I have no idea what there name is, but he was the only guy that could fix my exhaust after 3 recommended places failed miserably, he charged me 4 cans of turkey!

they are called Hillside exhaust, they have done some friends cars, bit over priced but good work.
i've been to unique exhaust a few times and taken heaps of customers cars to them. great blokes, great work, great collection in the factory next door.