View Full Version : aw11 4agze
garage_kook01
17th June 2005, 09:50 PM
ok i've pretty much bort a aw11 4agze am i rite in thinking that model is
AFM not MAP? the reason 4 that Q is i need wire and loom
tell me everything i should know about this engine please
its all a little confuseing to me
sorry for my lack of knowlage
Kevin
mumblezzz
18th June 2005, 12:43 AM
AW11 is definitly AFM. and use a distributor as opposed to DLI like the later models. Umm what else do you need to know?
garage_kook01
18th June 2005, 12:07 PM
can i change it to map? if so what do i need?
also i was told they have semi forged pistons is this so?
im thinking of bying a turbo setup if money allows me too
chrisellis
20th June 2005, 01:40 PM
u can change it to map by running an aftermarket ecu (eg mircotech)
yeah some say "semi forged" they are ceramic coated which is a major plus. either way the bottom end is farking strong, basically indestructable as far as factory bottom ends are concerned.
turbo setup, personally i dont think its worth it, get a pulley kit instead, save $1,000's
if ur after assistance in installing it in a hachi, a friend recently put one in his g/f's ae86.
and being the nice guy he is, he's written up how to do it for any other people that want to know how;
GZE conversion in ae86 (http://www.driftpimp.com/gzeconv.htm)
hope this helps.
Chris.
garage_kook01
20th June 2005, 02:29 PM
thanks dude that will help
ok well what am i looking at 4 a microtech??
garage_kook01
20th June 2005, 02:39 PM
can some1 just clear this up 4 me
The standard aluminium fuel lines can stay rite?????
verm69
20th June 2005, 03:15 PM
try http://www.club4ag.com/ man
Just hit the link on the left called Technical Reference. And it'll tell you HEAPS about the GZE.
Good luck too, they're a fcuking good engine
hope this helps
dave http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
garage_kook01
20th June 2005, 03:29 PM
well my big Q is the standad aluminium lines. do i have to replace them?
it says they need alot of fuel but im not sure
monkeymajik
20th June 2005, 05:26 PM
You can use the standard lines no probs.
garage_kook01
20th June 2005, 05:36 PM
thankyou dude and thankgod for that http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif and to think i was going to pay 300 for all new lines
the_sleepa
20th June 2005, 06:56 PM
hey man...i agree with VeRm69...stay with the supercharger and get a pully kit...i got a gze in my sprinter without the pully kit and it has more than enough power to keep the wheels turning....although im still looking at getting a pully kit...
but thats cause im greedy and want more....lol
garage_kook01
20th June 2005, 07:26 PM
yeah i think the S/C will do 4 a while then i will go big pulley im not to sure now bout the turbo idea.
where can i get a new haltech at a alrite price from???
aslo what fuel pump should i buy?
the_sleepa
20th June 2005, 09:13 PM
VL turbo external fuel pumps work fine...thats what i got...id be just going for a microtech....they cost about $1090 and can be tuned almost anywhere...very user friendly....
i think you will be more than happy with the stock 4AGZE...makes the car real fun to drive...very torquey
regards
jesse
garage_kook01
20th June 2005, 09:32 PM
the only reason im thinking of going haltech is because its comes with the loom ready to plug in the ecu
how can i get around this prob??
garage_kook01
22nd June 2005, 06:49 PM
bumptdy bump
please haelp meeee
garage_kook01
22nd June 2005, 06:50 PM
bumptdy bump
please help meeee
Sprinter_Seth
28th June 2005, 03:12 AM
ive just done the conversion. the aw11 is afm, which is alright in a way cause u can run something like an apexi S-AFC so u can adjust your air/fuel ratio easily. i think i sent u a big list of stuff i had to do.
as far as putting a turbo onto it, the bottom end is awesome, here are the specs for the engine http://www.club4ag.com/faq%20and%20tech_pa...A-GZE_specs.htm (http://www.club4ag.com/faq%20and%20tech_pages/4A-GZE_specs.htm)
u can put a turbo onto it fairly simply, ditch the sc and get a rwd inlet (these flow a lot better than standard ones anyway) then u just gotta setup your turbo properly. I have been told that on a good condition engine the bottom end can handle up to 25psi, however thats not recomembed. The guy i spoke to said that 15-18psi is fine any day of the week, as long as the bottom end is in good condition.
hope thats helps out a bit http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.