PDA

View Full Version : Bell Housing Brace



KE70Drifter
23rd November 2005, 09:33 AM
http://img111.imageshack.us/img111/2388/bellhousingbrace7de.th.jpg (http://img111.imageshack.us/my.php?image=bellhousingbrace7de.jpg)

They are on a RWD 4A* block and bolt to the T50 bell housing.

Where do i source some??

The real name of the part??

Iain

biggo
23rd November 2005, 11:49 AM
I have some awating transplant, and no u cant have them.

But to awnser your question, they can be sourced from a rwd 4ac (obviously) but seriosly if people are going from 4ac to 4age, they are most likely to be used again as there are only about 4 main bolts holding a 30kg gearbox on.

A bit on the side, what do u need them for?

mattysshop
23rd November 2005, 02:48 PM
well i would say that you would get them off a 4AC AE71 rolla..alot more common at the wreckers than an AE86..

KE70Drifter
24th November 2005, 09:31 AM
I need them for my 4AGTE as i didnt get any with my block. I didnt notice them before as i didnt know much about 4A*'s and when my engine was set to go in my mate asked where were my gear box stays. I was like wtf. That pics of his 20v gear box stays.

mattysshop
24th November 2005, 10:45 AM
yeh i'd say they are pretty neccisary..other than those..there are only 4 bolts holding it to the motor! ANY 4A - T-50 will fit..

StockAE86
24th November 2005, 11:38 AM
Im in melbourn, Im pretty sure i have some off a 4ac, make an offer

mattysshop
24th November 2005, 01:02 PM
Originally posted by stockae86@Nov 24 2005, 10:38 AM
Im in melbourn, Im pretty sure i have some off a 4ac, make an offer
make sure you don't put takumi tax on them..these parts are common enough and readily available to not have the extra tax on them..if you ask for too much i'd tell you to pressure wash your quiver bone in your mums bitch wrinkle..

rthy
24th November 2005, 02:14 PM
y not just make some custom ones?

KE70Drifter
24th November 2005, 02:41 PM
i managed to find myself a AE71 sprint that im in the process of stripping at the wreckers. Down here in tas AE71's are a bit harder to come by than the mainland, in some ways i wish i still lived there.....

common AE71's
98ron
tracks you are allowed to drift on

i best stop dreaming now

rthy
4th December 2005, 11:18 PM
I tried to fit one of these off my single cam onto my 20V block and it didnt fit!! one of the bolt holes need to be elongated, which I will have done shortly I think.