Ae71 Build (NOW RUNNING ROFL LOLZ)

[Jason]

I guess i better post it up here, the long winded disscion build of this cars in my sig if you really want to read it.

Any way this car allways started off to be a projectr car, aimes to getting it done before i get my P's. Which is look good sofar. Any way the proud day of when i 1st got it

[Wally]

looks clean as already!!!

sounds nice (your plans)

[Jason]

Then i got to work wile in the mean time i sourced part for it.

The plan was always a gze 1/2 cut but then something came up.... I got my hands on a peice of shit

[Jason]

The motor need some TLC

[Jason]

To my surprise the motor was in REALLY good nick, so its at the engine builders atm getting honed and clean. The pistons were in excerlant nick as well. But any way its getting a balence, but i lost some flywheel bolts when it was in peices http://www.ae86drivingclub.com.au/forums/emoticons/ph34r.gif so some new ones through toyota are on there way.



Any way a lot a time passed on now it looks something like this...

[Jason]

Suspention is cool

[Jason]

Yes its a SC14

[OBE353]

lookin good keep us posted

[Jason]

The interour has a full workover, the dash is a modifed T18 to fit, retrofitred with cool new backing plates

[Jason]

sucks to have 56k http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[Jason]

Found a pic about a week into the build, some one bought the 375 000 km T50 and diff http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif

[Jason]

A soup bowl was the best way to describe it... Also found some one to pick up the boat anchor for $100



Any way... Whats also goin in

[Jason]

Megasquirt MSII and V3

edis 4, just so happens i enjoy eletronics as a hobby

[mc68]

love the 4 pots mate http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[Joel-AE86]

TUFF!!!!

Rep the rolla http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[FilthinRich]

how much u pick up the hachi for?

[v-tec]

ae71 respect!

seems ur car is a fair bit cleaner than mine... lol, wish mine was like that

[Jason]

thanks http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

86 was picked up cheap, i basicly got a gze with accesories (FWD intake, new SC14 (sold SC12) mounts, T50, excedy clutch + other stuff i cart remeber for like under $600 all in VERY good condition although it didnt look it at the time :S

wahsed the car aswell today get all the over spray off http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif also got around to getting 2 door handles on, the back ones are real hard http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif

[Jason]

Its like omg are those my pistons?


Hone, balence, clean, head deck $300


I PWN 56K http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

note the brow is my finger scum http://www.ae86drivingclub.com.au/forums/emoticons/ohmy.gif

[Jason]

The other pics licked my balls since im using my backup camera http://www.ae86drivingclub.com.au/forums/emoticons/dry.gif


lolz my pro welding of stainless steel and crankwheelshit ie weld cracking so im like what the hell screw spot welding http://www.ae86drivingclub.com.au/forums/emoticons/rolleyes.gif

[Peter]

Looks bloody awesome. Good luck with it.

[MountainRunner]

look ing good http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[Peter]

I Just read your whole build up on rollaclub.com

Looks like it'll be one hell of a machine. Only if i had the time, money, skills, patience to do such a project im sure i would enjoy it. Well done!

[ae86 drifter]

whats the condition of the 86,u wanna sell

[Jason]

i sold it months ago, it was pretty munted away

[biggo]

hmm seems like great men think alike hey jason....

not another supercharged spirit have i seen.

[SprinterTRD]

Holy smokes a DB25 connector on the MS, I havent seen that since the 1st fuel only Haltec

[Jason]

thats what you get for DIY http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif

My new torque wrench came yesterday awell http://www.ae86drivingclub.com.au/forums/emoticons/wub.gif mmm 1/2 inch drive goodness now i play the waiting game for bearing and rings from ACL http://www.ae86drivingclub.com.au/forums/emoticons/sleep.gif

[Jason]

Mmm block goodness

[Jason]

yes it is that shinny http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif


Got to do some of my fuel system today

[Jason]

...

[Jason]

Whats getting hidden

[Jason]

g0t bolts

[Jason]

slowly getting there

grr acl got the wrong piston rings http://www.ae86drivingclub.com.au/forums/emoticons/angry.gif

really like the way the sugre tank came out. But i still need to find a way to get the outlet of the surge tank (about 1/2 inch) to the inlet of the filter (3/8 or 1/4 inch)

sneak shot at the semi fitted dash http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[Jason]

Ok hoildays so work can start again

Got stright into by mounting the Radiator and IC, yes there is clearance between the bonnet... Just
IC fits so snugly behind the grill Had to make new brakets for the bonnet lack aswell IC fouled the old one

Now i just got to insulate the IC from the steel braket

My goal is to try to get the motor in the car in 3 weeks, the main thing holding my back is some work with the manifolds of the SC and inlet that need to be reworked. It hard to get to the southside after school but hopefully going down there this friday and just maybe ill get them back before i go to school.

BTW the head is torqued down, inlet shims been ajusted, and now i just need to shims for the exhust cuze there would out by a bit more... bastards cost $16 each !

[Wally]

this is fkn awesome!!

keep it up

[Jason]

mock up of the setup...

bit of a tight fit... the charger will be tight fit in the engine bay but it should fit... if not out comes the hammer http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[E V A N]

pr0n

[biggo]

You killed my modem!!!!!!!

ARRRGH.... evil i say EVIL!!!!

...nice car but http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[Jason]

test fit the motor to make sure the supercharger will clear and it will http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

the car is still riding really high which is really gay i think ill have 2 pull out the struts and get some short stroke, duno what do yous think? the coilover are wound right down http://www.ae86drivingclub.com.au/forums/emoticons/wtf.gif

[Jason]

i bought my self a little present which was wy overdue 140amp ark welder. only cost me $106 which includes another another pack of sticks and a welding square.

any way i got staight into making up my supercharger brakets, i ran out of sticks before i could completly finish the other support http://www.ae86drivingclub.com.au/forums/emoticons/tdn.gif and i didnt bother stiking it on for the pic as i have to attach it from under the car (bolts to the under side bolts of the intake manifold), i can stand on the supercharger with the front bracket by its self without flex http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif there welds a look stody but they all got good penatration lol penatration

ive also complated the main part of the MS loom they took a good day, still needs to be hooked up to the computer which also need to be mounted. Im still looking for a intake sensor connector (the one that bolts into the top part of the manifold) to finsh it.

all my brand spanking new brake stuff has all arrived finally, i bought 8m of bundy tubeing, a pair of hilux front strut flex hose, pipebender, double flarer. So i will have brakes that work soon hopfully http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[Jason]

dooo diiii do diiii dooooo

making throtle links up now it had its first breath of life the other day when i cranked it over with the starter http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[Jason]

dooo diiii do diiii dooooo

making throtle links up now it had its first breath of life the other day when i cranked it over with the starter http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[Jason]

wow been awile since ive updated it here

any way.... its runs....

more to come http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif

[Jason]

thanks justin http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

http://www.youtube.com/watch?v=i2QfKfEM-_U

sounds a bit lawn mowery in the vid i can assue you it dosnt in real life http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

btw thats s/c off

[MountainRunner]

U LIE ITS A V8 hahaha:lol:

[Jason]

Got batts for my camera http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif

[Gilly]

nice pipe work.

looks neater with the RWD setup manifold. they are still a "bulky" package but yours definately looks neater set up that way.

well done, nice workmanship.

[MountainRunner]

very clean um spot the supercharger http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif