View Full Version : AJPS - AE71 - daily, turned track slider
RobertoX
14th May 2006, 05:44 PM
Hi guys i figure i should make the new thread rather than the other one....
chassis - 1984 AE71 Corolla Spirit
shell - red, 'spirit striping', AJPS stickers, wing, rust, hammered guards
engine - 4ac with 32/36 weber
driveline - xtreme h/d clutch, t50 with fresh shifter bushes and redline anti shocks oil, stock diff, welded 3.89:1 ratio
suspension and steering -
Front:
AE86 strut conversion
AJPS coilovers excel g inserts, 8kg spring
AJPS rose jointed lower control arms (+25mm)
Strut brace
some super pro bushes
rebuilt steering rack, with ra40 tie rod set up
power steering arms
Rear:
AJPS 6kg rear springs
KYB short stroke shocks
T3 Rose jointed panhard rod
Brakes:
ae86 234mm upgrade
race brakes rb74
braided lines
dot 4
fresh master cylinder
Rims:
Ma61 full set
g3 front re88 rear 185/60
spare rims 14x6.5 0 hot wires
Interior:
nardi classic long boss
Plans:
rose jointed traling arms
bucket seat
slightly more neg camber
rear swaybar
strip the interior
POWER
Matt
14th May 2006, 06:21 PM
hey man sounds the goods, please get some pics up.
sprinter_adam
14th May 2006, 06:25 PM
Hey,
cars lookin good dave keep up the good work. any plans for puttin pics up?
Adam
ae86dave
14th May 2006, 06:45 PM
dude when ar u gonna strip the inside of that thing http://www.ae86drivingclub.com.au/forums/emoticons/rolleyes.gif
..
RobertoX
14th May 2006, 07:06 PM
when i get a camera, its not stripped cos it was a daily driver
*sigh* another car wrecked
ae86dave
14th May 2006, 07:21 PM
dude its time to strip this thing and atleast loose the soundeadner below http://www.ae86drivingclub.com.au/forums/emoticons/ohmy.gif
...if u need a hand jus give a holla ill bring sr1600 wit me aswell hell lend a hand http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif
will b good practice for when i have to do mine.
RobertoX
15th May 2006, 01:11 PM
why do i need to strip it?
Dxaqta
15th May 2006, 01:42 PM
strip it
keiichi
15th May 2006, 02:06 PM
what are rose joints?
MARKE70
15th May 2006, 02:19 PM
this thing sounds great http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif . hope your planning on a 4age.
I WANT PICS!!!! http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif !!!!!!!!!! http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif
http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif
http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif
http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif
http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif
breno
15th May 2006, 02:35 PM
why do i need to strip it?[/b]
I think because its so drift spec! It cant drift without stripped out interior!!!!!!!!111
Anyway nice car, hows it go with the weber?
klusio
15th May 2006, 02:49 PM
Get it naked!!!
Strip it good, worth what 300kw?
Sounds like a great build up!
Photos haha do it!
RobertoX
15th May 2006, 04:21 PM
rose joints - basically a solid mounting of a suspension link with the ball bearing joint, also makes it adjustable
its not THAT drift spec, but yeah i prolly will strip it at some stage
the weber goes fucking sick for a 4ac, still slow tho lol
ae86dave
15th May 2006, 06:15 PM
Dave stop tryin to make ur car so "granny spec" and strip it http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
..or atleast get a D&T exhaust.....rofl http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif
Choad
15th May 2006, 07:05 PM
ahhahahahhha strip it , and pass on the dnt exorst http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif, st8 out the block i say.
RobertoX
15th May 2006, 07:30 PM
im not trying to make it granny, just being sensible, i have already gutted one car and it was ghey
klusio
15th May 2006, 10:35 PM
Just take out the sound deading and put the carpet back in.
still up holds some daily comforts.
sprinter_adam
15th May 2006, 10:42 PM
Or you can go leather on its ass http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif you always said the bitches love it
Choad
15th May 2006, 10:43 PM
hey by the way what happen to the tape player?? from ur old one???
Joel-AE86
15th May 2006, 11:11 PM
keep the seats in so homes like me have some comfort when busting some KESev Record drive-by's http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif
Oi how long till you get ya license back?
RobertoX
16th May 2006, 12:32 AM
that is the gayest thing i have ever heard of, please burn your seats now
Or you can go leather on its ass http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif you always said the bitches love it[/b]
Jarrod
16th May 2006, 06:17 PM
the rolla looks sik dave drop your engine out of the 86 ur scrappin in2 it. would b phat.
ill hook u up with a cheap exhaust.
there aint nothin wrong with my work, just cos d&t mainly promote commodes dont mean that we r shit.
plus if my work is thst shit then y do u guys keep comin here 2 get your stuff done.
or do u just need someone 2 pay out cos hayden is your ride everywhere.
ae86dave
16th May 2006, 06:28 PM
LMAO^^^
hes tryin
Jarrod
16th May 2006, 06:34 PM
its a strugglin buisness now what can i say. plus it dont help when my boss cant c past the holden badge.
ae86dave
16th May 2006, 06:44 PM
that is the gayest thing i have ever heard of, please burn your seats now
<{POST_SNAPBACK}> (index.php?act=findpost&pid=223943)
Or you can go leather on its ass http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif you always said the bitches love it[/b]
[/b]
cracks me up http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif
owned!!!!111!!!! http://www.ae86drivingclub.com.au/forums/emoticons/owned.gif http://www.ae86drivingclub.com.au/forums/emoticons/owned.gif http://www.ae86drivingclub.com.au/forums/emoticons/owned.gif
RobertoX
17th May 2006, 01:59 AM
people from the northern suburbs of adelaide are BANNED from posting in my car and most other threads
im not 'scrapin' my 86
and i will get an exhaust, just not through D&T
love you all
RobertoX
17th May 2006, 02:57 AM
http://img82.imageshack.us/img82/8827/pt20g320605iv.jpg
http://img82.imageshack.us/img82/5061/pict25015ao.jpg
http://img513.imageshack.us/img513/235/10001442tk.jpg
http://img364.imageshack.us/img364/1719/10001404hz.jpg
Choad
17th May 2006, 10:38 PM
hmmm no northen people? y??????
is it cuz we are fully sik??????????
hey u gonna strip it or wah???????
ae86dave
18th May 2006, 06:09 AM
my apolagies to Dave my friends wont trash ur thread ne more.
but i think they love u lol
RobertoX
21st May 2006, 02:07 AM
J-pipe
ae86dave
21st May 2006, 02:10 AM
this car owns mallala
RobertoX
24th May 2006, 05:48 PM
well like i said, the turbo set up was finished today
it seems to be making about 80-90rwkw at about 8-9 psi (wont no 100% till guage is hooked up) but yeah
wheel spins in 3rd etc, very good to drive http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif
so happy, should be good
Dxaqta
24th May 2006, 06:14 PM
pictures
ae86dave
24th May 2006, 07:32 PM
this project is ridiculous dave y cant u be normal.
cant wait to c it hit mallallalalallalallalalalal aa satday http://www.ae86drivingclub.com.au/forums/emoticons/blink.gif
Micknofx
24th May 2006, 11:28 PM
Holy shit this thing has a turbo on it now.... this is gonna eat nissans for breakfast!
driftae86
24th May 2006, 11:42 PM
new engine bay pics please http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
RyGuy86
24th May 2006, 11:46 PM
Holy shit this thing has a turbo on it now.... this is gonna eat nissans for breakfast![/b]
- I need clarification here..
this has a turbo 4ac in it???
or a 4agte?????
-
Please be the 4ac,,,, that is sooo cool.. its a gun of a car without a turbo, but now... MY MY..... how much was this project and how long is the 4ac , if thats what it is.. going to last?
keiichi
25th May 2006, 12:41 AM
RyGuy86
i know this is gonna sound random but...
i love your avatar and sig. http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
driftae86
25th May 2006, 01:51 AM
- I need clarification here..
this has a turbo 4ac in it???
or a 4agte?????
-
Please be the 4ac,,,, that is sooo cool.. its a gun of a car without a turbo, but now... MY MY..... how much was this project and how long is the 4ac , if thats what it is.. going to last?[/b]
yes its a 4ac turbo, built in preparation for the DA round at mallala.
so cool http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif
v-tec
25th May 2006, 12:21 PM
lol should last a while thos 4ac's are strong as anything haha
RobertoX
25th May 2006, 02:01 PM
yeah, it took 2 days to get running, no fucking around
it is a 'j-pipe' turbo set up (off the bottom of the headers, no turbo manifold here!)
it is running a hitachi turbo off a late cosmo (1 of the 2 off the cosmo)
it runs a 3 inch exhaust stopping before the diff
and a sigma zenith carby
it is suck through and it is VERY responsive
it is still pinging up the very top, but a few litres of sunoco 120octane should fix that ($7 a litre)
the car has been totally transformed, and now throttle slides so easily
stripping the interior etc today, rigging up an air filter and a larger radiator and she should be sweet
i have 2 spare motors, and if it blows a headgasket it will get a copper one made up, but should be reliable on 8psi
cant wait for the weekend!!!11111
the car owes me
$1000 car
$1000 susp
$100 steering
$200 wheels
$600 turbo kit
pics soon!
driftism
25th May 2006, 02:59 PM
HAHA... always wanted to see a 4ACT!!
KE70Drifter
25th May 2006, 04:18 PM
OMG i want pics http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
4ACT must be the first built http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
Whats the durability going to be like david?
Iain
Micknofx
25th May 2006, 04:41 PM
^ Just for clairification on Ryguys pic; that little bitch loves the emo and I mean REALLY loves the emo damn hypocrite!
RyGuy86
25th May 2006, 04:49 PM
^ Just for clairification on Ryguys pic; that little bitch loves the emo and I mean REALLY loves the emo damn hypocrite![/b]
Man ! You always kill my BUZZ..
Peter Coombe is not EMO!
RyGuy86
25th May 2006, 04:53 PM
<{POST_SNAPBACK}> (index.php?act=findpost&pid=227414)
^ Just for clairification on Ryguys pic; that little bitch loves the emo and I mean REALLY loves the emo damn hypocrite![/b]
Man ! You always kill my BUZZ..
Peter Coombe is not EMO!
[/b]
MickNOFX > Can you please turn down your backstreet boys cd, i can hear it from here. http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
Now stop hy-jakin Trueno's Thread.
Choad
25th May 2006, 05:25 PM
big transformation over the last two weeks dude.
hmmmmmm who would ever think to turbo a lunch box http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
cant wait to see this bad boy this weekend http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif
and YAY 4 stripping the interior
dori_86
25th May 2006, 05:36 PM
hmm i wonder what drag between an bigport 4age and the turbo'd 4ac would be like....? interesting
chapl
25th May 2006, 05:43 PM
ill give him a run. lol
see you at the track f00l
marvin
25th May 2006, 05:51 PM
Good Luck Dave, stick it to them on the week end, my pick is that you will finish top 10.
RobertoX
26th May 2006, 01:52 PM
thanks for the support guys
we finally hooked a boost guage up to work out why it was pinging high in the revs it was running 20psi!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!
the boost kept rising through the rev range,
obviously a 4ac isnt going to last long on 20psi so...
it was driving like a bit of a pig, as it had all of its timing taken out of it, but massive boost...
it is now running 10psi max, and lots more timing, no more pinging, and so much smoother and drivable
as for big port vs this - big port would be left well and truly for dead, it would be at least as quick as a super charged car and damn near as responsive
guards are being flared atm, sound deadner straight after then wheel alignment
see you out there, come say hi!!111
KE70Drifter
26th May 2006, 02:12 PM
What about us interstate guys http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif show us the pics http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
Iain
VIC_AE86
26th May 2006, 02:23 PM
Yeah Dave.. post up pics.. biatch..
Medicine_Man
26th May 2006, 02:46 PM
PICSORBAN
http://www.ae86drivingclub.com.au/forums/emoticons/greenbounce.gif
RobertoX
26th May 2006, 02:55 PM
im going to take that threat seriously from admin.... ill get pics by monday, maybe someone at lalla can take pics and post em cos i cbf
v-tec
26th May 2006, 03:34 PM
damn dave, i think youll be having a few orders for a 4ac turbo kit soon bud http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
just for all those that dont have the time/money to venture into the world of 4age.
picsorbitchslap http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif
KE70Drifter
26th May 2006, 03:46 PM
Awesome cant wait dave http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif
RobertoX
27th May 2006, 12:12 AM
pics are on rolla club
KE70Drifter
27th May 2006, 10:53 AM
Pics look sweet http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
Love the setup http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif different :S
Iain
breno
27th May 2006, 09:22 PM
word is that Dave qualified 16th for Super Drift at Mallala, which is a great result out of 40-50 drivers, and let alone with a 4act!!!!
breno
28th May 2006, 11:01 PM
http://www.ae86drivingclub.com.au/dcimages/4/1/3/9/553008.jpg
keiichi
29th May 2006, 01:40 AM
congratulations on placing 16th.
what do you think were the major drawbacks of the car?
keiichi
29th May 2006, 01:19 PM
get some more pics/vids up......
....and dave is still gay...[/b]
whats with this dave is gay bussiness?
sounds like you're jealous or something http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
driftae86
29th May 2006, 01:27 PM
<{POST_SNAPBACK}> (index.php?act=findpost&pid=228515)
get some more pics/vids up......
....and dave is still gay...[/b]
whats with this dave is gay bussiness?
sounds like you're jealous or something http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
[/b]
i dont think its about being jealous, more like trying to justify his own feelings towards dave http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif
driftism
29th May 2006, 01:43 PM
it slides http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif
driftae86
29th May 2006, 01:49 PM
awesome http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif
chapl
29th May 2006, 01:56 PM
hell yeh #####!
chapl
29th May 2006, 01:56 PM
j-pipe yo
Bustin_86
29th May 2006, 02:16 PM
dave is the bomb shizzle!
haterzzzz
RobertoX
29th May 2006, 05:37 PM
thanks for the props fellas http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif
Choad
29th May 2006, 06:37 PM
ahhaha well done dave
is it possable for any more angle than that????????
so how did the turbo go????
i can acturly see smoke of ya tires http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif
as a wog dude said in the pits looking at the vallent drag car and i quote "UR FULLY PHAT"
sprinter_adam
29th May 2006, 06:56 PM
Man this things hep c spec, fully sic!
more seriously im spewin i didnt get to see you run, only you could come up with a crazy set up like that http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif
Adam
RobertoX
29th May 2006, 07:13 PM
it was my mates idea, i wanted nos lol
RobertoX
29th May 2006, 07:14 PM
draw backs of the set up are
very hard to drive at 5km/ph, sucks fuel (running rich safe spec), takes a while to warm up, not legal
other than that i love it
anyone else got pics?
RobertoX
29th May 2006, 07:23 PM
http://img151.imageshack.us/img151/5302/p2405061420ad.jpg
pic of engine bay
sprinter_adam
29th May 2006, 07:35 PM
Ok fair nuff, NOS would of be quitee appropriate cosidering the day was run by F&F lol
Heres some snaps i got
http://img528.imageshack.us/img528/5028/copyof10004469pc.th.jpg (http://img528.imageshack.us/my.php?image=copyof10004469pc.jpg)
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/104778.jpg (http://img144.imageshack.us/my.php?image=copyof10003974qq.jpg)
Adam
verm69
29th May 2006, 08:00 PM
i think your his hero dave http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif ^^
Choad
29th May 2006, 08:29 PM
ummmm me and dave stole pics of ya car on friday http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif couldnt resist sorry lol
[attachment=3793:attachment]
/TUFFF AZZ
[attachment=3796:attachment]
yes people when u dont have that extra 2 inches on ur accel cable use some spare wire http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
hey lawson did this acturly hold up on tha day????????
[attachment=3797:attachment]
best modification ive ever seen. cutting tha fins ehheheheh gotta luv this guys work
[attachment=3798:attachment]
when u say it takes a while to warm up do u mean that it takes awhile to paint ur olds front lawn black??????
Choad
29th May 2006, 09:12 PM
hahahahaha
y u say that???
i do agree but yeah what ur reason
driftae86
29th May 2006, 10:44 PM
they've had some special times
mc68
29th May 2006, 11:37 PM
hhahahhaha, that car is the bomb, diggity
ae86dave
30th May 2006, 12:09 AM
hes a handfull lol
but quiet the engineer
v-tec
30th May 2006, 12:34 AM
no wonder it goes so fast dave, its a dirrrty motherfuker http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif
turrrrbo 4ac is hot, nice work mate
RobertoX
3rd June 2006, 09:00 PM
i got a st162 twin core rad today to stop the overheating issues when it is getting the shit caned out of it
and also an ae92 oil cooler
im organising a full cage when funds allow
monkeymajik
4th June 2006, 12:31 AM
Sweeeeeeeeeeeeeeeeeeet.
What size tyres are those on the soupra mags?
Choad
4th June 2006, 11:54 AM
i got a st162 twin core rad today to stop the overheating issues when it is getting the shit caned out of it
and also an ae92 oil cooler
im organising a full cage when funds allow[/b]
how bad were u over heating????? i seen u had a spare radiator sittin behind ur car in tha shed.
RobertoX
4th June 2006, 06:47 PM
i was overheating bad, so i upgraded
the tyres are 185/60/14s all round at the moment
althought they also see 185/55/14 and 175/60,
im seriously considering 15s on the front
RobertoX
19th June 2006, 01:25 PM
heaps of work done during the week, all is sweet
got the air filter on, all the oil plugs are wired to the body, put my jdm tyt3 fender mirrors on for a wank, bucket seat, some more interior stripping
once again big ups to mark at madaz for his professional work!
i took it out to mallala on the weekend (grip day thing), great fun, even more so that drift
the brakes held up well but i will be putting slotted and vented rotors on it at some stage
it also needs some more neg camber, but everything else felt good, cant wait to get a cage tho!
it did a 1.33.16 (old semi slicks on front and old street tyres on rear and 0.4 bar of boost) around mallala, not happy with that until i get 1.29.99, which i should be able to do no worries on the new motor, and a few susp tweaks (very twitchy drift set up)
the motor is still running strong but it is blowing some smoke
UPDATE: as it is blowing a bit of smoke and is down on compression on 3rd cylinder
we are going to rebuild it before G1 so it doesnt let us down...
rebuild as follows:
ACL pistons and rings +1mm
ACL/Monotorque head gasket (stock size to retain comp)
New bearings
Maybe a new stud kit
and to keep with the ghetto theme
cam regrind
dremel head port
0.8 bar of boost. with a nice broad torquey power band
RobertoX
19th June 2006, 02:48 PM
some pics!
jdm y0!
http://img162.imageshack.us/img162/706/10001660hl.jpg
air filter set up actually fits neat
http://img236.imageshack.us/img236/3947/10001672zg.jpg
st162 twin core, 910 top hose with mod
http://img164.imageshack.us/img164/7114/10001689dm.jpg
steel pipe, no more sucking in under vacuum!
http://img106.imageshack.us/img106/2313/10001695ld.jpg
stripped and bucket seat
http://img106.imageshack.us/img106/3200/10001700ux.jpg
power steering arms, AJPS extra lock spacers
http://img151.imageshack.us/img151/8665/10001720ia.jpg
dori_86
19th June 2006, 02:55 PM
ha ha the mirrors almost look to BLING for the car! http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif
chapl
19th June 2006, 03:11 PM
fuck man. you said you had alot of lock! thats alot of lock y0
Joel-AE86
19th June 2006, 09:31 PM
This thing rocks jocks n socks.
The thing handles mad and goes hard.
Cant go wrong for the cost of this junker
...it needs a new head gasket and a turbo gasket tho.
driftae86
19th June 2006, 11:28 PM
omg look at that lock. time for 90 degree drift i think dave http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif
RobertoX
20th June 2006, 12:40 PM
lap times are more fun hahahaa
ArJay
20th June 2006, 07:20 PM
Hey Dave outta interest, how did the brakes hold up at Mallala. You get fade after a few laps?
1'33's not bad out there dude....was out there on the weekend with a mate who was in the 6hr thingo. He's got a fairly worked Dat 1600 that run a 1'29 on cut slicks so the 1'33 is pretty respectable on that kind of budget and tyres etc.
Any idea how much hp the engines prob making? Had it up against a 4age yet?
R:)
RobertoX
20th June 2006, 07:31 PM
dunno on HP, 90rwkw?
brakes were fine
i will run a 1.30 in this car as is
ArJay
20th June 2006, 07:58 PM
So when you gonna start selling AJPS turbo kits for the 4ac???......do it.....
RobertoX
20th June 2006, 08:59 PM
i have been thinking about it, i would just sell the bend, flanges and a dump pipe and maybe the carby, they would be about $900 with a rebuilt carb and the oil set up shit
Stuck
20th June 2006, 09:06 PM
Not bad, i wouldnt mind paying that to turbo my 4AC.
Maybe ill consider buying a sprinter and turboing it for 900$.
* Thinks *
RobertoX
20th June 2006, 11:11 PM
pros:
good power
awesome torque
responsive
really cheap power
people think your car is cool
you can wheel spin in 3rd gear
you can laugh at people with 4age's
it can be running in 2 days
its not even that loud with a 3 inch
cons:
fuel consumption goes up
illegal
ghetto
stuff can start breaking now you are making some actual power figures
pig down low
you want to speed cos you can lol
so basically keep it on boost and you will love it
Joel-AE86
20th June 2006, 11:39 PM
pros:
cons:
you want to speed cos you can lol[/b]
I found this so hard to not do in my area lol
Feels mad overtaking cars boosting hard in a junk as fuck KE/AE
RobertoX
20th June 2006, 11:55 PM
yeah once it comes on boost, you just wanna keep the foot mashed and enjoy
OH and while we are on the subject of thrashing my car: how many KMs did you do?? my fuel light is on...
dori_86
21st June 2006, 12:33 AM
have u turboed ur ke as well joel?
RobertoX
21st June 2006, 03:14 AM
i will be getting some more twin core radiators if anyone wants them?
ArJay
21st June 2006, 12:50 PM
i have been thinking about it, i would just sell the bend, flanges and a dump pipe and maybe the carby, they would be about $900 with a rebuilt carb and the oil set up shit[/b]
Sweet...
Just the fact that it can be done in a couple of days is awesome...
What's it like with detonation etc? Being draw thru you couldn't run an intercooler, (yes?). Would you need one anyway on lowish boost?
Why would it be illegal Dave? Sigma turb's run pretty much an identical setup from stock don't they? Surely you could get it thru regency with the right brakes etc....
R:)
keiichi
21st June 2006, 03:24 PM
if you make this product available i would buy an ae71 just so i can buy the kit off you:P
Stuck
21st June 2006, 05:22 PM
I dont get it, How is it illegal?
RobertoX
21st June 2006, 06:13 PM
technically its not illegal
but it makes you want to drive illegally hahaha
i will make the kit available, but it will take some time to get all the bits together, i will keep people posted
Stuck
21st June 2006, 06:18 PM
Ahaha I get it. You rekon it would work for a 4KC?
mikes86
21st June 2006, 06:40 PM
This thing is the biggest ghetto weapon! That lock is nuts. Good work champ
Gilly
21st June 2006, 07:49 PM
got lock?
unreal car bud!!! interesting to see how far you can get with the 4ac!! i don't think anyones ever bothered, respect aiight!!!
RobertoX
22nd June 2006, 12:38 AM
lock rocks the big 1!
as for the 4ac i will be persisting with it for sometime
ill keep people updated
maybe some dyno figures
Stuck
22nd June 2006, 11:11 PM
Ever considered giving it a good wash and shine?
RobertoX
23rd June 2006, 11:21 AM
yes, but i only drive it twice a month (more if im naughty http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif)
and i dont really see the point in washing it,
i normally was it before going on the track, but im not going to waste time poslishing it
unless you want to volenteer?
Stuck
23rd June 2006, 12:12 PM
Fo sure. I would do it if you let me ride with you when your on track.
To bad you live in SA... http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif
RobertoX
23rd June 2006, 12:58 PM
i need a cage before i can take passengers on the track which will be happening at some stage http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif
Stuck
24th June 2006, 01:01 PM
Whenever your near give me a call. I want to feel the 4AC ;D
How many motors have you gone though?
Ill put money on it that you have spare 4AC's hanging around ey ;D
RobertoX
24th June 2006, 08:53 PM
still on the first one, i have a spare i will be using soon
ArJay
26th June 2006, 01:04 AM
Any dyno numbers yet bro?
Also, what twin core radiators are you getting in?
R:)
RobertoX
26th June 2006, 01:50 AM
st162 celica
no dyno yet, when i fix it up a bit i will
update:
with the head gasket gone, i am going to put silver seal/headgasket in a can or similar a shot to see how long it lasts http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif
ae86dave
27th June 2006, 01:03 AM
this is a true ghetto chariot lol
MAT713
27th June 2006, 09:02 PM
what turbo have u used and what carb should i be looking for?
to do a similar set up
RobertoX
28th June 2006, 12:08 PM
i get asked this question everyday, read third page
RobertoX
6th July 2006, 02:10 PM
the new block is going in this weekend in prep for the g1 comp on the 16th time to BAN (burn a nissan)
MARKE70
7th July 2006, 09:57 PM
hey mate.
i love your style. i would like to no what kind of life time you think this set up would achieve minus the little 20PSI hick up at the start. im seriously considering it.
thanks mate awesome work.
!!!!!!!!!GHETTO FTW!!!!!!!!!!
RobertoX
7th July 2006, 11:09 PM
we will see how good the new motor handles it
but if it was just run on 7psi and not had the fuck caned out it i have no doubt it would of lasted 'forever' as in 50,000kms with out a major drama
Javal
10th July 2006, 02:44 AM
Whens the new block in man?
Javal
10th July 2006, 02:35 PM
Wickeeeeeeeeeeeeed! Can't wait to see this thing in action again.
Javal.
RobertoX
10th July 2006, 02:46 PM
i have hired C1 express to run the car in from me - 1000kms to go and counting!
Javal
10th July 2006, 02:50 PM
You should have hired me to do it http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif
RobertoX
10th July 2006, 06:12 PM
so you are willing to drive an unregoed pig 1000kms?
ArJay
10th July 2006, 11:21 PM
I got a pair of jack stands and a brick.......
Ferris Bueller biznitch.....
RobertoX
11th July 2006, 02:51 AM
this week will depend on the validility of that statement
C1 runner innerers inc.
Javal
12th July 2006, 01:25 AM
so you are willing to drive an unregoed pig 1000kms?[/b]
Yes, but you won't want me to, cause you're still running it in.
Like you said, in your ghetto speccer you just want to thrash it, and a new motor is gonna throw a rod out if i do that http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif
But then again a replacment motor will cost you one cubic six pack http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
Javal.
RobertoX
12th July 2006, 03:56 AM
MASSIVE PROPS are in order from 'C1 running INdustries' who definitely brought all his skills (5hours worth) to the cypher
thanks to SEEDEEWON entreprises 300kms have been done... with 700 to go
WOOT!!!1
RobertoX
12th July 2006, 04:42 AM
*copy pasted from toymods*
as for my car
we took it out at 9pm tonight
and it was running like SHIT! seemed to be fueling up and other ghey things...
but we fiddled around, and then a spring on the carby snapped....
and it started running PERFECTLY, couldnt be happier, so linear etc
and we managed to knock off 300kms of the 1000kms
things are looking up!
it is now LEGALLY registered, just waiting on the correct number plates (FKN plate theives)
my new engine mount to replace the snapped one comes in tomorrow
and my cusco front end (rose jointed caster rods, modified caster rod brackets for easy swaybar removal, and a tie rod end brace) have all been ordered, but they wont be here in time for G1...
cant wait!
RobertoX
13th July 2006, 03:42 AM
just got home from another long night
we are up to over 600kms now
going back to MADAZ tomorrow to replace engine mount, fill it up with torco syntetic oil, and turn boost up to 10psi
do another few hunded kms, and she will be all ready for G1
once again a massive thanks to C1 for his excellent running in skills while some of us dont have licenses
MARKE70
13th July 2006, 09:39 AM
awesome man!! sounds good. this one sounds like she might last a bit longer. http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif . i dont no if this has been said previously but do you no if youll be selling these as kits?? oh and i don't think im interested in those springs for sale sorry-ive been told to go 6KG.
i wish you lived in queensland
RobertoX
13th July 2006, 11:37 AM
im undecided if i will be selling kits as the carbys are very hard to get...
whats the go with the springs? i have 8 and 6kg on order.???
prizedbnx
14th July 2006, 12:45 AM
Hey,
i have an ae82 and i was going to work my 4ac, and this has pretty much made me want to do it 100%
so thanks for not wasting time on a bigport http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif
and thank god im not the only one with these thoughts
keiichi
14th July 2006, 01:06 AM
hey how heavy would falcon springs be?
RobertoX
14th July 2006, 04:10 AM
another long night, the boost has been turned up to 7.5psi
and the running in oil has been changed to torco
car is running sweet, got another 150kms to do then 10psi, wheel alignment then hit the track WOOT!
Joel-AE86
14th July 2006, 02:20 PM
Best be repping hard at G1 neeegurrrghhh.
Shit will be wet and you'll be able to catch all the nissan junkers.
RobertoX
14th July 2006, 02:26 PM
re88s might be TOO slippery then loL!
RobertoX
15th July 2006, 10:46 AM
y0
yeah, well im done running in this sack! 900kms w00t! lol
going to get it dynoed this morning if JHS the fat c**t ever wakes up
Props to C1 international, wastegate bolter upperers with frozen hands!
it won a couple of drags last night on 0.5 bar and the car is so responsive now, but it has developed some ghey axle shake vibration shit
this isnt a takai style excuse http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
i will be out there repping heart and soul!
MARKE70
15th July 2006, 10:54 AM
oh poop i must have miss read it then, my bad so can i buy some rear 6kg's? and how much?
sorry mate
RobertoX
15th July 2006, 11:00 PM
after some EXTENSIVE tuning today
after the dyno run this morning (ping spec)
the car is making a LOT more power!
should be sik
it even beat and rx8 in a drag, my car was 3 up!
hahaha
ArJay
15th July 2006, 11:45 PM
after some EXTENSIVE tuning today
after the dyno run this morning (ping spec)
the car is making a LOT more power!
should be sik
it even beat and rx8 in a drag, my car was 3 up!
hahaha[/b]
Sweet...what's the good word then? How much rwhp? Got sheets....?
R:)
RobertoX
16th July 2006, 01:06 AM
nope no dyno sheets,
it made 74rwkw (not on power run)
before overfueling and popping (flames)
then leaning out up top and pinging its arse apart...
SO....
we gathered all the info we learned from the dyno
and then
put new plugs in and reset the gap (big big improvement)
new points reset the gap
upped the boost to 0.8
retarded the timing ever so slightly after about 1 hour of street tune (made adjustment go drive etc..)
then we added another fuel pump, an electric facet, this was the BIGGEST improvement
this added so much more power up top it was like a different car, instead of coming on boost and 'plateau-ing out' its now pulls hard well past 6,000rpm
it was fucking flying at this stage on pump 98, started running a fuck load smoother and more econmically....
i would say it is making at least 100rwkw in our 'safe tune'
rarely pops now, and we have basically moved the power curve higher into the rev range to better suit drift etc
everything seems to be holding together well...
packing to car now.. then up for a 5:30 am start for mallala
see you all out there!
dori_86
16th July 2006, 01:16 AM
sounds good, hope 2 c u and it do well 2moro
RobertoX
17th July 2006, 01:20 PM
what a fucking weekend!!!! shit fuck lol!!
time line
monday: brand new block goes in
tuesday: pick up car and run in 300kms done
wednesday: purchase and replace d/s engine mount another 300kms
thursday: back to workshop for oil change, filled with torco that night another 250kms
friday: got tyres ready bought a couple of parts did another 180kms
saturday: put it on the dyno coughed splutterd spattered pinged! took the results and then we and changed and re gapped plugs, points, checked dizzy, added and elec fuel pump turned boost up to 0.9 bleeding to 0.8 bar adjusted timing!!! car was fucking FLYING so so fast...i would say a FLAT 14! pulled a car length on an RX8! did another 150 kms
so the car was run in and going fucking hard....
sunday: get up 5:30 am...head to G1 drift comp..., go to warm up, bang 3rd gear, tyres smoking me smiling.. oh shit Jpipe to turbo gasket is blown...resulting in no power!!! also a coolant leak causing my car to get hot!
quick fix is attempted...failed!
somehow i manage to still qualify....
but there was no point going in the battles with such little power...
so i called on Clem Smith (track owner) who pulled the welder (last ditch effort) out for me...
it took too long getting repaired that i missed my battle, went out for some wet slides in the team drift for the LOL factor...and then went home, broke, cold and tired with a slow car....
the end!
ps. some snazzy cusco bits for the front end just rocked up FTW... i will updated when they get in stalled!
dori_86
17th July 2006, 01:52 PM
yeah i wondered what had happened, but i as i was frozen i could walk to the pits to find out what was happening http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
Professor_cool
17th July 2006, 02:20 PM
go crap engines http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif
i went home cold and pissed off on a trailer http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif
dori_86
17th July 2006, 02:29 PM
were u the blue sprinter?
RobertoX
17th July 2006, 02:30 PM
yeah! crap motors rock n shit! cheap to replace
at least i could drive mine home http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
RobertoX
17th July 2006, 02:30 PM
he was in the decent blue sprinter, not the silly thing that crashed... http://www.ae86drivingclub.com.au/forums/emoticons/ohmy.gif
ArJay
17th July 2006, 02:46 PM
That sux Dave...at least u've got the car pretty well sorted now tho. Blows after all that work minor shit stopped you from being competitive.
What you gonna do about the j-pipe gasket? Did it have a proper gasket or was it Shoo-Goo.... http://www.ae86drivingclub.com.au/forums/emoticons/greenbounce.gif
R:)
RobertoX
17th July 2006, 02:59 PM
it was a proper gasket, but now im showing off how good dinky little TOYOTA bottom ends are by running 0.9 bar! (13psi)
little weaknesses show up when you start pushing it!
Javal
17th July 2006, 04:18 PM
Man if you can still qualify even with your car making no boost that shows that you, my boy, have some mad skillzzzzz. A gasket costs like $.30, go ficks it, now.
RobertoX
18th July 2006, 01:27 AM
all the problems will be getting fixed this week...
RobertoX
24th July 2006, 01:45 PM
it broke
Gilly
24th July 2006, 02:53 PM
it broke[/b]
what did? 4AC go bang bang, did you find the limit http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
Javal
24th July 2006, 04:46 PM
?!?!?!?!?!!!!?!?!!
Tell me the ghetto chariot is ok? Please?
Javal.
RobertoX
24th July 2006, 05:41 PM
piston smashed into three peices, http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif
yes it is back together and running...
BUT the whole motor seems out of balance and will prolly blow up again
time for gze bottom end!
ae86dave
24th July 2006, 10:14 PM
what did u expect on stock 30yr old internals?
hey can u post a pic of the munted piston?
Javal
24th July 2006, 11:54 PM
Bad luck man... that was a new (ish) motor too... dang.. Gze bottom end FTW man.
Yes, pics of the destroyed piston, please!
Javal.
Gilly
25th July 2006, 11:07 AM
4AC with a GZE bottom end, could definately call that a world first.
Professor_cool
25th July 2006, 11:47 AM
piston smashed into three peices, http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif
yes it is back together and running...
BUT the whole motor seems out of balance and will prolly blow up again
time for gze bottom end![/b]
looks at broken 4ac...
looks at broken Ca..
http://www.ae86drivingclub.com.au/forums/emoticons/fap.gif junk ftw
Joel-AE86
25th July 2006, 03:01 PM
GTE FTW
Nissan/4AC FTL
RobertoX
25th July 2006, 08:57 PM
first day back on the road, been caning it all day... nothing has broken yet.... touches lots of wood!!!111
going out again in a minute
any of the sa dudes with cars running give me a holla if you want to go for a drive
sprinter_adam
25th July 2006, 08:58 PM
where bouts n when, im might be up for it
RobertoX
26th July 2006, 05:01 PM
tonight
Javal
26th July 2006, 05:56 PM
PM me details, im up for that. work til 9 but thats it. Gogogogo send now.
Javal.
Javal
27th July 2006, 07:14 PM
Fuck this thing is a rocket.
RobertoX
27th July 2006, 08:46 PM
lol, $4200 and counting
ae86dave
29th July 2006, 11:15 PM
u were running GZE bottom end?
Javal
30th July 2006, 04:02 PM
Nah its just got stock 4ac bottom end atm, but going full 4AGTE setup when he has money. Considering how much he works hindley st, shouldn't take too long http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif
Javal.
ae86dave
30th July 2006, 06:21 PM
yes dave is a fair whore(with a perm)
RobertoX
5th August 2006, 07:44 PM
yeah its still 4ac bottom end
it will be EFIed 4agte soon enough
maybe blow up another 4ac before then hahahaha
a few more mods will be done this week i will keep you all posted
killjoy112
5th August 2006, 08:19 PM
you rock dave best idea ever http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif http://www.ae86drivingclub.com.au/forums/emoticons/wub.gif ooohhh so many emotions
driftke70
7th August 2006, 12:04 PM
your my ke's inspiration
RobertoX
9th August 2006, 01:10 PM
the actuator diaphram had a hole in it so the boost was spiking,
we replaced it and turned the boost down and the timing up
it is much nicer to drift now
RobertoX
12th August 2006, 01:55 AM
FKN flange gasket blew again, it started running on 3, and is generally running GHEY
oooh the life and times of carbies....
4agte WILL happen
mallala tomorrow, hopefully get into the 129.XX or better
Stuck
12th August 2006, 12:57 PM
Noo the 4AC-T =(
RobertoX
14th August 2006, 03:02 PM
yeah exhaust leak getting fixed today, and then brake upgrade
RobertoX
15th August 2006, 12:42 AM
i snapped an axle, i will put a t18 diff in soon
Javal
15th August 2006, 01:03 AM
Ouch... not fun.
Get some GTE + T series happening, this thing may be quick but it's not seeming too reliabel atm man.
get it happening for the bbq. If you want i can lend you a hand.
Javal.
RobertoX
15th August 2006, 02:44 AM
well that diff has done 300,000kms, 25,000 of those locked, trashed hard
the car starts everyday, it is a project it has teething problems
i will do gte sooner if you fund it, for now i will leave the 4ac as temporary
Stuck
15th August 2006, 11:46 PM
The Mighty 4AC is over =(..
RobertoX
15th August 2006, 11:53 PM
its not out yet, im sure it will go out in a 'blaze' of glory
Javal
16th August 2006, 02:28 PM
http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif
http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif
E V A N
16th August 2006, 02:38 PM
Looks like i'll be joining you in the AE71 drift cars Dave.
Going to start building one.
Course_Out
16th August 2006, 08:31 PM
And all this time I thought Evan was gay...........
RobertoX
16th August 2006, 11:47 PM
Looks like i'll be joining you in the AE71 drift cars Dave.
Going to start building one.[/b]
but you will get banned from hachiroku circle jerk
RobertoX
17th August 2006, 02:03 AM
within 12 hours it should have
t18 diff with swaybar mounts
3.7:1 locked centre
new drum shoes
rose jointed trailing arms
i also need to update specs
but i got my cusco 'power' brace in (ties castor rod brackets together) it is awesome
i also have a front lip
i will post some more photos soon with the new look and the crash damage (small tap in the rear)
RobertoX
17th August 2006, 11:16 PM
t18 diff is in, makes some wak noises, the car is also leaking massive fumes into the cabin giving me a bad head ache!
i need a 3.9 tho!
the firenzas arent a bad tyre either!
Stuck
19th August 2006, 01:11 AM
Theres front Lips that fit on KE70s? No way ;o
RobertoX
19th August 2006, 09:54 PM
yup sure is i will post pics soon
driftke70
21st August 2006, 12:27 PM
now perhaps?
Bensonius
21st August 2006, 12:31 PM
why did you go 3.7...would have thought 4.1 minimum
RobertoX
21st August 2006, 03:07 PM
i WOULD of gone 4.1, but you see a 4a-c doesnt like revving past 6000, so down the back straight at mallala it is on 5700, so i thought a 3.7 would be good, i was wrong, 3.9 going in next week
when i 4agte i will 4.1 http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif
RobertoX
28th August 2006, 06:31 PM
car is on the dyno!!1111
driftke70
29th August 2006, 11:00 AM
thats fricken awesome
if you build another 4ac you should just balance the bottom end, it might add that little bit of strength your looking for.
ArJay
29th August 2006, 01:23 PM
That's nuts. At what boost?....rpm? Sheets or ban......
R:)
Javal
29th August 2006, 05:16 PM
The car needs an actuator to retard (?) the ignition as boost goes up so he can crank more timing out down low and, and overall make more power. unfortunatley these require fair bit of time to set up. and as we all know, time is directly proportionate to cubic dollars.
And this is lawson we're talking about http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
As said before, he is going 4AGTE in a few months.
Javal.
RobertoX
29th August 2006, 06:40 PM
about 15psi at 5500rpm
ArJay
31st August 2006, 12:08 AM
Aye Dave why you going 4agte?
Surely that's making enough power for you now...is it a reliability thing or are you hoping for more smoke plumige?
RobertoX
31st August 2006, 03:19 PM
nar, i want more revs and more reliability, i want to get under 1.25 at mallala, it did a 1.29 on like 4psi with aus spec brakes, so yeah...
RobertoX
31st August 2006, 09:09 PM
OMG w00t
4ac, stock compression, stock fuel pump, stock ignition, stock everything
just 1 ihi turbo, stromberg carb and a 3 inch exhaust, 98 oinktayne and a bit of igntion....16psi =
RobertoX
31st August 2006, 09:11 PM
edit: i suck at the internet
ArJay
31st August 2006, 10:01 PM
Rad....neck snapper....
RobertoX
31st August 2006, 10:25 PM
not quite neck snapper, but it goes ok, weight bridge 910kg with 1/4 tank
jono86
1st September 2006, 06:04 PM
man thats awesome... im so doin that.!!
RobertoX
1st September 2006, 06:25 PM
the whole turbo set up will be for sale soon
Stuck
4th September 2006, 12:15 AM
When finish this car will you buy another KE70 and turbo the 4AC http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif...?
RobertoX
4th September 2006, 01:25 AM
the turbo set up and 4ac all complete with fresh bottom end is now for sale EOI, i have an offer of $1000...
Dxaqta
4th September 2006, 10:00 AM
god some people are either crazy or stuiped
VIC_AE86
4th September 2006, 10:39 AM
Dave fits nicly into one of those types.. http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
Dxaqta
4th September 2006, 10:59 AM
yeah i was more reffering to someone who is going to pay 1 grand for a 4ac turbo
VIC_AE86
4th September 2006, 11:49 AM
Each to thier own mate.
ArJay
4th September 2006, 11:52 AM
god some people are either crazy or stuiped[/b]
Call me both...but you give us some examples of fresh rebuilt engines making 100 rwkw for $1K that you can bolt into my AE71 straight swap...
ArJay
4th September 2006, 12:19 PM
id rather small port 4ag with some carbs
but each to your own[/b]
True to each his own but that thing will hand a carbed smallport it's own arse. Carbed smallports are like hens teeth and building one you'd not have much change left from at least $2.5K after webbers and all the R&D...
Can see your point tho and it's not for everyone. Reliability wise it's no different from any other turbed engine....still blows gearboxes, diffs, and the odd head but 4ac's are like $50 each.... http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif
R:)
sprinter_adam
4th September 2006, 01:25 PM
Dxaqta - id go a 4act over small port with carbs any day. Sure the occasional head might go but its a hell of alot cheaper and less stressing and at the end of the day youll be driving instead of tuning.
dave - impressive figue there! all up how much money and time does it owe you?
VIC_AE86
4th September 2006, 01:38 PM
My personal opinion is that this isnt the place for whoring..
Take it to offtopic..
RobertoX
4th September 2006, 07:04 PM
reliable? i drive it every day, sure it has had a few teething issues, but yeah, cant complain since i thrash the fucking piss out of it
a carby small port?? = the ghey!
thanks for whoring my thread, 13 pages now woooo
not everyone can afford a yager built 7a
Teddy
4th September 2006, 10:20 PM
lol you people can bitch and comment all you like, but almost the big 100 from a 4AC?! ahah, whos got the braging rights now http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif
RobertoX
5th September 2006, 01:23 AM
thanks for the kind words
and as for dxaquta, i could arrange to have some hektik motor built, i could get mark yager to build me a motor, BUT the best thing about my car is the fact that it is running and i can drive it the 'conversion' took 2 days and i was thrashing it that night
crazy86
5th September 2006, 10:28 AM
I had a mate with a carbed GE, and while it was a kickass motor, it cost a shiteload in parts and tuning, to get an injected engine to run on carbs, you dont just bolt a carb on and tune it, it takes a fair bit of R n D to find what length trumpets are needed get the kind of flow you want, having the appropriate exhaust etc and so on.
Considering a 4AC can be had for the princely sum of "tree fiddy", or a can of coke, this engine has some good bang for the buck quality. Im not a fan of Turbo's either, and the Dyno does need to be run in 4th, but I still think Lawson has a winner here.
keiichi
5th September 2006, 07:25 PM
so whats the advantage of converting an efi to carb? could you do it to a 22re engine?
RobertoX
5th September 2006, 11:09 PM
yes you could, but for the amount it would cost, NO, unless you wanted to put some junk carby on there and no tune it properly and lose power.....
Bensonius
5th September 2006, 11:46 PM
the problem with going to a 4.1 ratio is that you run out of gears to quickly.....
he is looking for a 3.9 which should make for a happy medium between acceleration and top speed....[/b]
hmm, yeah true but 3.7 equals more stress on the drive line...oh well should be good with the 3.9
RobertoX
6th September 2006, 12:08 AM
3.9 welded and ready for abuse
RobertoX
6th September 2006, 05:12 PM
this car is currently for sale offers around $3000 without coilovers and rose jointed stuff
Stuck
7th September 2006, 12:33 AM
WAHHHHH?!?! Why ? http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif...
ArJay
7th September 2006, 12:03 PM
this car is currently for sale offers around $3000 without coilovers and rose jointed stuff[/b]
Guess I'm out then.
Good luck with the sale Dave.
R:)
RobertoX
7th September 2006, 01:11 PM
no worries man, if i dont get any proper offers, i will pull the turbo set up off and shes yours
ArJay
7th September 2006, 04:49 PM
no worries man, if i dont get any proper offers, i will pull the turbo set up off and shes yours[/b]
Ok dude...keep us posted...
R:)
RobertoX
7th September 2006, 09:09 PM
i have some photo shoot for DRIFT BATTLE magazine tomorrow, should be sikker than aids
we will be in the hills if anyone else is driving at 11am lol
Stuck
8th September 2006, 12:00 AM
Thats sick. Tell us what issue so we can buy it http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif
Bustin_86
8th September 2006, 12:38 PM
as if we dont all buy every issue anyway http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
I cant beleive they are actualy featuring a 4act ae71 http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif its awesome lawson. The downside is that every kid is gonna start doing ti though http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
Justin
dori_86
8th September 2006, 09:24 PM
nice, cant wwait to see how it all turns out, next question... is it with or with out all the stickers?
RobertoX
9th September 2006, 03:25 AM
yeah photo shoot was today, it was sick
street drift FTW*
*dont do it kiddies lol*
RobertoX
13th September 2006, 04:05 PM
getting a few things fixed today, including stopping my rear brakes from binding up !!!!! wtf
anyone else with t18 diffs have this problem?
dori_86
19th September 2006, 05:28 PM
hey man i thought ur car was gonna be in the latest drift battle?, i've just got maine had a quick skim but no boro 71's in it other than the DA event a mallalalallalllallallla
RobertoX
19th September 2006, 05:46 PM
nov 24 man
JDMJNKY
19th September 2006, 09:28 PM
getting a few things fixed today, including stopping my rear brakes from binding up !!!!! wtf
anyone else with t18 diffs have this problem?[/b]
yeah i did wen they got hot i just took out the automatic adjusting mechanism and not a worry.
RobertoX
20th September 2006, 10:34 AM
THIS CAR IS NOW DEFECTED THANKS TO OFFICER HARD ASS, NO AMOUNT OF RATIONAL CONVERSATION WOULD GET ME OUT OF IT
only done for too low
re shell time
oh and FUCK THE PO-LICE
Stuck
20th September 2006, 10:43 AM
='[... Damn those cops..
Good luck with the Re-Shelling
Bustin_86
20th September 2006, 10:48 AM
that sucks the wang, especially because this car is so illegal http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif
Bustin_86
20th September 2006, 10:48 AM
oh, and
FFFTTTTTTTTTTTTTTTTTTTPPPPPPPPPPPPPPPPPPPPPP
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.