My 1979 TE72 T-18

[ToyT-18]

Hey guys im new to this forum, after seing athe people posting T=18's i though i might just add all of mine in.
my brother got a t-18 about 9 years ago and i didn't know wot the hell they were, so after about 7 years after my sister had also driven it i got it given to me as a good old hand me down, after a year on my L's i grew to love this car, once i had my p's i loved it, i learnt to drifit in it, and i even did my first burnout in it! after about 6 month's on my P's i had found another T-18 after talking to my fother i conned him into buying it ($250 wot a bargin) was in good nic apart fro mabit of bog witch was cracking. Then about 9 months later i was pulled over buy a nice couple who asked if i wanted parts for my car and i said hell yeah, so we got talking and they offered me 2 T-18's for $500 ($250 for each car even more of a bargin), http://www.ae86drivingclub.com.au/forums/emoticons/greenbounce.gif after talking to my father i got the go ahead for 2 more T-18's after nearly a year i still have 4 T-18's sitting in the drive way! piccy's
this car's name is Tony the Toyota!
[attachment=5108:attachment]
after a while i ended up having an accident so i had to replace the panel (lots of spares) http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif
[attachment=5110:attachment]
This is how it sits to this day!
[attachment=5111:attachment]


this is my second one its name is harry the hatchback, not looking very good cause i kinda started stripping it
[attachment=5112:attachment]
then i decided to really strip it
[attachment=5113:attachment]

this is my third one its name is carry the coupe
[attachment=5114:attachment]

and this is my 4th one its name is terry tuff nuts
[attachment=5115:attachment]

after a while i got motivated to do something so i got my first one off the road and i got my 4th one back on the road
This iswot it looked like
[attachment=5116:attachment]
[attachment=5117:attachment]

[ToyT-18]

this is more wot it looks like now!
[attachment=5118:attachment]
[attachment=5119:attachment]

after a while i decided to do abit of a conversion!
[attachment=5120:attachment]
yes these are infact TA22 celica headlights!
[attachment=5121:attachment]
abit wonkie but u get that!

i also started to pain the car cause i want a new colour of some sort
this is the most up to date picture taken today
[attachment=5122:attachment]
havn't finnished it yet but im still on the way there
this is my new sound system, a brand new 1000 watt kenwood amp running 2 800 watt kenwood 12 inch typhoon subs
[attachment=5126:attachment]

mod's to come:
lowered AE86 suspension! yes they do fit!
if u want proof its here http://www.toyota3tc.com/forum/viewtopic.p...te72+suspension (http://www.toyota3tc.com/forum/viewtopic.php?t=6857&highlight=lowered+te72+suspension)
Nissan Skyline R31 Rear disc's
a modified 3t motor completely worked turboed with 2tg efi with adaptor plate!
a set of 14 inch hotwires
either a cheap mans LSD (weildy) or a proper LSD
others i will add latter when i remember them

hope u all like my car and i hope for comments

Cheers Sean

[Javal]

Tony the Toyota!
harry the hatchback
carry the coupe
terry tuff nuts[/b]
Man you musta watched waaaayy too much thomas the tank engine when you were a kid.

Good luck with it though man, TE72 : awesome.

Javal.

[ToyT-18]

well actualy no i didnt but now i think of it, it kind is like that isnt it, Well my sister name the one tony the toyota, then i though the names need to rime with something about the car so thats y they are like that

[KAWAII_hachi_roku]

very nice t-18s ! i love them. http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[Bustin_86]

pimpin bro!

[Peter]

Haha, Awesome stuff. Those ta22 headlight conversions are slowly becoming popular.

[ToyT-18]

well if i could really be bothered i would actualy get a propper TE72 Dual headlight grill and assembly from the USA but i just got a set of my mate celica lights ad did it that way, there not lookin too shappy but they need some fixing up for sure

[KAWAII_hachi_roku]

yes the ta22 lights look very cool

[ToyT-18]

i've also bin thinking about a big conversion a 7MGTE in the t-18 i know it needs brake upgrades and wot not but i know it can be done
[attachment=5144:attachment]
[attachment=5145:attachment]
[attachment=5146:attachment]

[Javal]

Good plan man...

Not to discourage you at all, but it's gonna be a long hard conversion.. then again all of them are. Good luck with it.

Javal.

[Micknofx]

7m's are huge but getting old go a 1j if you want a stomper hp drag setup in one of those cars.

[Brendo]

hey man, good stuff with the project...

i remember seeing your t18 in the maccas carpark near york park a few months ago, it inspired me to do the same to mine haha

[ToyT-18]

Black bonnet FTW, well i got rid of my black bonnet, cause i actualt got pulled over alot more with a black bonnet than i did befor i got it, so thats gone for now!

should come and see my rides!

oh yeh i forgot to mention that the 7m was going in a different car that i will be using for racing and so forth, but my friend has made me start looking for a 4AGE 20v or a1ggte witch is most likly going to be my choice!

Cheers Sean

[sus10]

dude do you live on a farm?

[ToyT-18]

nope i live in a normal village house! if u wanna call it that!
y's that?
this is my driveway
[attachment=5272:attachment]
my driveway goes onto the road at the front of my car!

[ToyT-18]

Well i got off my arse today, had a day off work so i started getting stuck into it
got the struts out so i can put another lot in that dont have cut springs in them!
got ther compresser out with the spray gun and got big tin of primer grey paint http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif

[ToyT-18]

Well i got off my arse today, had a day off work so i started getting stuck into it
got the struts out so i can put another lot in that dont have cut springs in them!
got ther compresser out with the spray gun and got big tin of primer grey paint http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif

[attachment=5419:attachment]
[attachment=5420:attachment]

will post more pics of painting up latter
Cheers Sean

[ToyT-18]

well here's my days work!
[attachment=5427:attachment]
[attachment=5428:attachment]
[attachment=5429:attachment]

Cheers Sean

[Bustin_86]

are you bogging it and gettign rid of rust as you go?

[ToyT-18]

i havnt got to those parts of the body yet so i havnt needed too! but i will when i get to that part of the car!

[Bustin_86]

ah okay man fair enough. I have been taking all my panels back to metal as i go along lol, there is a little bit of rust under the paint that i wanted to get rid of lol. it really slows it all down.

[ToyT-18]

yeh i've done that with the bonnet and the right guard! but my old man knows the guy that owns grubs body works here in launnie, and he said just sand back the paint and if there is no sicn of bog u will be right just to go over the old paint as long as its sanded back, so i've dont that with the other guard, bvut i know were all the bog and rust is anyway atm so its all good, but im going over it in primer grey and them using Putty spray to fill in some of the little dents then after every thing is don i will then go over it in another primer then take it to grubs and they are doing the propper red for it and i dont need to pay a cent witch will be good!

but once its all grey i have to register it first! so i can drive it when i get my licence back http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif http://www.ae86drivingclub.com.au/forums/emoticons/greenbounce.gif http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif

like i said another time i think feel free to PM me one time when ur around or u've bin to symmons and u can come round!

Cheers Sean

[ToyT-18]

ooo ooo ooo ooo im so excited may have got myself some very special items have a looksie

[attachment=5596:attachment][attachment=5597:attachment]

so excited if i get them

[ToyT-18]

[attachment=5680:attachment][attachment=5679:attachment]
[attachment=5681:attachment]

[ToyT-18]

central locking
[attachment=5800:attachment]
and im going to use the other ones for an electric boot relese and a bonnet relese

[Bustin_86]

fender mirrors= big justin bonah

[ToyT-18]

just some updates of what i've done and what i've bought
[attachment=5860:attachment]
i have also purchased this
[attachment=5861:attachment]
[attachment=5862:attachment][attachment=5863:attachment]
[attachment=5864:attachment]

[ToyT-18]

well i got an offer of 300 dollars for 2TGUE efi so i can make an adaptro plate cause, the port holes are the same, so then i will have an efi 3t, and yes the turbo is for the engine i have in it or one i have lying around

[Javal]

Ahh, tahrbo-san.

Excellent move.

have fun blowing boxes.

[ToyT-18]

well its not gunna have that much powah. but these t-18 boxes are fairly good for example finding out you can go into first at 140km/h down a hill and have massive compression lock up, i thought i would have snapped a few teeth in the box but nope it is still holding, and a guy i know is running a 4age 20v in a KE30 with a t-18 box (dont know why) but its held together. and he races it aswell. so i not really worried, i have another box there if i have to take one out and get it fixed to take more power, witch doesn't cost much. but for the time being i will be running the standard box, it's just really so i can give some of the 180 boys around the blockie root abit of a run for there money

Cheers Sean

[ToyT-18]

now its time to party http://www.ae86drivingclub.com.au/forums/emoticons/greenbounce.gif http://www.ae86drivingclub.com.au/forums/emoticons/drink.gif

[attachment=5899:attachment]
[attachment=5900:attachment]
[attachment=5901:attachment]
[attachment=5902:attachment]
[attachment=5903:attachment]

[ToyT-18]

oh and i might paint it a gun metal grey maybe
[attachment=5904:attachment]

hehe http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif
[attachment=5905:attachment]

[Javal]

Holy crap! Smoke AHOY!

nice one man

[Stuck]

BLACK DUDE http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

Go black ! http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif

[Bustin_86]

lookin ace man, you will have to come up to my place some weekend so i can flare your guards!

Justin

[ToyT-18]

now this is wot im thinking
[attachment=6039:attachment]

[Bustin_86]

yeah man, not to bad at all! Very different!

[ToyT-18]

sure is thats y i think i might go with it cause i wanted blue but someone i know already has it
[attachment=6041:attachment]

and i dont want red again even though red goes fast but yeh i just want it to be different

[srt01]

Go the green, but with a black bonnet.

[JoshKE]

I tried to match Brendo's KE10 colour, its about as close I can get with the prepress settings on the screens here, probably looks purple. http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif

I do dig the green, would look tops all one colour, might try removing the black bits.

[ToyT-18]

nah im abit sick of the black bonnet, here police see a car with a black bonnet they think oooo its a racer lets pick on him, so im not having the black bonnet anymore just staying all one colour might turn it into a show car evenualy who knows, but yeh im staying away from the black bonnet for now

JoshKE: cheers man yeh i woildnt mind if the whole car was green

[srt01]

Fair enough then bro.

[JoshKE]

Whoops, mouse slipped!

[attachment=6061:attachment]

[srt01]

That looks awesome. Do the rears as well. Rewinds, soooooooooo HOT

[JoshKE]

[attachment=6069:attachment]

Heh, they're Rewinds. Taken from some pictures of Evan's Levin.

[Bustin_86]

hahahahah nice job josho. Got coupe?

Yeah, i reckon that green would be a winner...

[JoshKE]

Werd up.

Yeah, would definately be a nice colour. http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif

[Brendo]

my colour bitches lol...word

[ToyT-18]

TE72 Hardtop sedan FTW

im soo keen for that colour, im deffinatly going that green now

so far i have also decided i when i get the turbo i will put the intercooler in it too make everyone have a second thought about it, will be just running a blow through system with a 32-36 downdraft webber till i can afford my efi

Cheers Sean


you dont mind if i steal your colour do you brendo???

[ToyT-18]

just a few pics from today
[attachment=6228:attachment]
[attachment=6229:attachment]
[attachment=6230:attachment]

[ToyT-18]

this just arived today all i need now is an exhaust manifold!
[attachment=6301:attachment]
[attachment=6302:attachment]
[attachment=6303:attachment]

[Bustin_86]

flutter flutter flutter

[ToyT-18]

just found some 2tgue efi for my car now should be getting it on thursday or next week!

[ToyT-18]

well i finnaly got it registered on thursday im now roaming the streets of launnie so if you see me honk or wave at me

[ToyT-18]

well i have now 2tgue efi so im happy will be getting an alloy plate made up soon to mount the efi to the 3t and all i need now is a computer and an elc dizzy witch a cant find atm, here are some pics i've taken when i did abit of a drive
[attachment=7337:attachment]
[attachment=7338:attachment]

[srt01]

lets see some pics of some dorifto action then. http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif

[anastasios]

you should paint the light surrounds black, i rekon it would look cooler

[ToyT-18]

lets see some pics of some dorifto action then. http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif[/b]

nah not yet, i am going to wait till i have efi and turbo on it!

[Bustin_86]

Weak Shaun! http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

When you coming up so i can flare yo' guards?

[ToyT-18]

when i can finnaly pay back all my depts so i can keep the money i earn

[ToyT-18]

will be abit fuzzy came off a phone!
Big one Wheeler (http://www.youtube.com/watch?v=bkgGCZ1vIYg)

was good untill the clutch slipped the next time round!

[ToyT-18]

my wicked new sticker
T-18 POWER
[attachment=8489:attachment]
[attachment=8490:attachment]

[Stuck]

Nice sticker ;D

[Bustin_86]

Hey Sean, been sms'ing you heaps lately! Could use some parts off of your wrecks... get back to me whenever you can http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif

Justin

[Gilly]

black headlight surrounds FTW!!

[Stain]

Whoops, mouse slipped!
http://image-cache.ae86drivingclub.com.au/forum/uploads/post-956-1156223904_thumb.jpg[/b]

Holy shit! I never thought a T18 would look so good as a notchback! I know its a photoshop, but did they ever make 'em? I'd buy one in a instant if they did! http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif

[ArJay]

TE72 Coupe.... everywhere but in Oz tho.... http://www.ae86drivingclub.com.au/forums/emoticons/fap.gif

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/119286.jpg

[green_boy_91]

there sick i wouldnt mind 1 of them if i could get 1 http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[ToyT-18]

tryed 17's on the car today they look sweet as will get a pic soon, but should be getting them buy the end of the month maybe

[Stain]

TE72 Coupe.... everywhere but in Oz tho.... http://www.ae86drivingclub.com.au/forums/emoticons/fap.gif[/b]

Hmm... I should have guessed it'd look just like a KE70.
The photoshop does it more justice. Longer doors, longer boot, more angular rear window. All "Mmm" factor. http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[ToyT-18]

here is also the other te72 sedan
[attachment=8663:attachment]
[attachment=8664:attachment]
[attachment=8665:attachment]

and te71
[attachment=8666:attachment]
[attachment=8667:attachment]

[ToyT-18]

double post

[Bustin_86]

Ah who knows they could look decent... personally i wouldnt do it but Sean isnt really a ricer so im trusting him http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[Stain]

That's more like it! Those TE72 sedans and TE71 hatchs are fucking sex.
...well not that ugly white one

[ArJay]

Where the hell are these dudes getting the front spoilers from?
Searched like crazy and all I can come up with are the FOHA ones from ToyCoolRolla...

[green_boy_91]

that red 1 looks beasty as farkin sweet http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[Brendo]

dont do the 17's bro, dished 8in wide 15's
hmmm

[ToyT-18]

finnaly got a pic of my 2tgue efi
[attachment=9486:attachment]
[attachment=9487:attachment][attachment=9488:attachment]

[ToyT-18]

well im finnaly back into the speed of things i finnaly have tyres for my 14" hotwire just need some money now to get it taken in for a wheel alignment i've also got up and started on a motor to replace mine as it has been blowing smoke very very badly when driving along. got started today cleaning things up
[attachment=9495:attachment]
[attachment=9497:attachment]
i have most things ( rings, barings sump gasket, head gasket, rear main seal) just need the rest of the gaskets to finnish it off,
[attachment=9496:attachment]
also getting the motor ready to be sprayed, i don't want to go black cause to me thats just boring, if anyone has ideas of a colour to go with the green or should i just go with the green for the block, with a black engine bay?
oh and this is might not be the motor thats getting the efi, if i do put the efi it wont get the turbo

Cheers Sean

[ToyT-18]

it looks like his thread is going to be mainly my postings oh well worth the effort

ok well so far i have i have managed to put the crank in hopfuly should have the pistons in by the w/e and hopefully painted orange then next week i will have the old motor out and the new one in!
will post more pics as i get more done

Cheers Sean

[ToyT-18]

im definatly going to use it no doubt about that its just im re building a motor atm so my car doesnt blow smoke anymore, im still intendeing on building a motor to hold the turbo its just we dont have an adaptor plate yet so i might not use it

[Stuck]

Dude keep posting. Im Reading. I love TE72's!

KEEP AT IT!

[ToyT-18]

cheers havn't done anything today but i got some orange paint for the block, got a hone and a ring compresser so i will do that all tomorrow when i get home should be finnished soon and running

Cheers Sean

[ToyT-18]

ok so the time came oround to putting the new motor in and i was planing on using the head off the old motor so i took it off and i was pissed off but so happy at the same time as i found i have an original 13T block with pistons
[attachment=9781:attachment]
[attachment=9782:attachment]
they are a higher comression by looking at the champer

now i have to take my pistons out and the ones from the 13t and swap cause the opnly head i have atm is a 13t one and it wont fit on top of ordinary 3t pistons

CHeers Sean

[ToyT-18]

well all um i have spent almost 13 hours outside working on my car
[attachment=9783:attachment]
this is what i ended up with. will get some better photos in the morning as i am hell tired!

Cheers Sean

[ToyT-18]

how did i make your day?

well anyway its in and running really wellnot even blowing smoke so its all good

Cheers Sean

[Bustin_86]

Thats wicked as man. So you did the whole rebuild yourself? Might have to get you to give me a hand with mine sometime soon!

[ToyT-18]

justin yeh i did do the hole thing myself im just getting abit paranoid that somthing is going to fall out and go bang!

well i have a full 13t so there is one person that has one!

[Bustin_86]

Whats a 13t?

Nah man she will be sweet... apparently it is piss easy to do rings and bearings and shit. Balancing can be tricky though. Im sure you did it right Sean, just chill aye http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

Justin

[ToyT-18]

13t is the same a 3t only the tops of the pistons are different and the compression chamber is also smaller witch makes it compressed more that the standart 3t so its just a 3t with different style pistons and head with more compression thats about all

[RobertoX]

they are hemi design...hemispherical combustion chamber, good things

[us_ae86]

well if i could really be bothered i would actualy get a propper TE72 Dual headlight grill and assembly from the USA .....[/b]
hehe..... i have that. http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/123443.jpg

[ToyT-18]

well i thought while i had the chance of the internet i would post these up
[attachment=11834:attachment]
[attachment=11835:attachment]

and the car might be turning black as of saturday.
cheers Sean

[Bustin_86]

Lower it dude!

[ToyT-18]

it was dropped earlyer

[ToyT-18]

the time has come and here it is

tada
[attachment=11879:attachment]
[attachment=11878:attachment]
[attachment=11880:attachment]

[ae71]

nice, its a pitty it dosen't stay like that long.. http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif

and its lower...

next time you should go gloss black http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif

[Bustin_86]

Looks sick man http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif

[ToyT-18]

i think its gunna stay that way for a while! dont wanna confuse the cops too much!!!!

[ToyT-18]

cheers man im rather pleased myself for pressure pack cans, but what im going to try and do for the next coat is release the pressure from the spray pack cans crack it open then use the paint in a proper spray gun, well im gunna try it anyway

[ToyT-18]

well im gunna try it the cheap way and see if it works

[Course_Out]

TIf your going to try and et the paint out of pressure packs hold the can upside down and spray until there is no gas left.

I've heard of people doing this and it being safe but I take no responsibility should you end up with shrapnel in your face

[hilton]

wtf http://www.ae86drivingclub.com.au/forums/emoticons/blink.gif , use normal paint http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[ToyT-18]

TIf your going to try and et the paint out of pressure packs hold the can upside down and spray until there is no gas left.

I've heard of people doing this and it being safe but I take no responsibility should you end up with shrapnel in your face[/b]

i already knew how to get the pressure out of the can,


wtf http://www.ae86drivingclub.com.au/forums/emoticons/blink.gif , use normal paint http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif[/b]

well if its already pre mixed and its like 3 dollars a can, instead of paying 99 bucks for like 4L then like 30 for thinners i may as well go the easyer way if its gunna work alright

[ToyT-18]

ok well don't know what you guys are gunn think but don't blast me for this. well anyway my girlfriend doesn't really like it black but she came up with the suggestion if i keep it black i should put something on it like a airbrushed gloss black red back spider on the bonnet or the roof or something like that, just an idea cause I'm liking it black now so it might be staying that way.

[Brendo]

car looks wicked now, no airbrushing dont be gay lol... chicks like nissans just tell her that chicks arent suppose to like these cars

[Bustin_86]

w3rd

[ToyT-18]

well i was thinking about getting some MA61 flares to see how they go

[starni_boy]

Where the hell are these dudes getting the front spoilers from?
Searched like crazy and all I can come up with are the FOHA ones from ToyCoolRolla...[/b]


if your talking about the flat spoilers like the jdm style ones, the ones ajps dont sell, gilly is your man to talk to if your really interested.

[Brendo]

prob pm him man, he made that post last year

cheers

[starni_boy]

lol o well. this is true but yeah i cant really be bothered.. gilly should have them in his madhouse section when he is ready

[outcast350]

It does not matter one bit if your lady friend doesn't like your car.

And cracking open spray cans sounds dangerous. If I were you, I'd just buy some paint.

<edit> my bad, this post is quite old.

[ToyT-18]

well it's been a while since I've been here got a new pick it looks a bit ruff atm will be taking it off the road and doing it again putting new panels on it and shit like that.
http://www.rollaclub.com/board/uploads/monthly_07_2007/post-607-1185083267_thumb.jpg

still planing a new motor as I don't know what to get you still after a 3tgte, but not got enough money for it looking a lot for a working one, but I need something in it thats more powerfull, befor this ones shits itself cause then I will be stuck without something to drive,

will give more updates as I go along with getting it done properly

cheers Sean

[paulie]

are those bmw lights on the front?

[Brendo]

pretty sure they are some model of celica

[ToyT-18]

they are Ta22 celica headlights with custom mounts till I buy the ones from america

[lewa]

she looks tuff atm sean!
will look even better once shes painted a REAL colour!
and becomes less ghetto,
but I still think you should keep this one ghetto
and do a different one up nicely!
just my 2cents

Peace,
Johnny

[ToyT-18]

well it's gunna be a bit hard to do up another one when I've now only got one left! (the one I drive) well I'm think I'm only going to re paint it matt black again but with a gun this time not sure, might still need some idea's on other colours if I don't choose to stay the same again

[ToyT-18]

yeah just after the 3tgte atm but I would like the turbo and manifold, cause if I don't get that on the motor I wont have much luck finding one seperatly, but cheers man for telling me about the motor I just need the money!
really short on money atm so a bit hard specialy if my car dies now

[ToyT-18]

cheers but like I said atm I don't have the money in witch I really need, to get one in my car, but I'll keep in mind you got it, oh and does ajps have any front chin spoilers and how much

[ToyT-18]

cheers! anyhooo, how much would you want for the motor with the manifold and turbo, just a ballpark figure would be cool

[ToyT-18]

cool cool will start saving as I get payed next!

[Bustin_86]

Looks good Sean, don't you already have a front lip on the car in that photo?

Matte black with gloss bonnet, taking cues from Haskell hey? :P

[ToyT-18]

man thats garden edging do you really think I'm gunna stick with that or get a real chin spoiler, well I want a chin spoiler so I can turff off the garden edging works the goods though when you got no money

[Snoozy]

Hey... I've seen your car around.. fat azz
got any T18 bars you want to part with haha?
I'm keen for some on my ke70

[ashie]

I doubt sean would, the ones on his car are fucked and I doubt he would have any others as he's got rid of his other cars

[ae71]

straight rust free t-18 bumpers are hard to come by

[ToyT-18]

yeah unfortunatly casey is right I don't have any spares axcept the good ones to go on my car and I was goign to sugest JHS to you aswell but he beet me too it

[Snoozy]

Ill keep looking then haha
theres a mint T-18 at a wreckers in town, but it's not for parts :(

[ToyT-18]

whitch wreckers is that, just so I can go have a look!

[Bustin_86]

Marks 4x4 Series two... ie plastic bumpers.

[ae71]

yeah it's fairly good condition, seems tight... that series 2 one

[ToyT-18]

it's not that neat, it's actualy got a few dents in it! bit of under body damage that I'm aware of but he wants 750 for it, and it's definatly not worth that much 450 if that

[Brendo]

it's has a good nick diff and mint 3tc and t50...body is fine/ok I reckon it's worth 750

[ae71]

it's not that neat, it's actualy got a few dents in it! bit of under body damage that I'm aware of but he wants 750 for it, and it's definatly not worth that much 450 if that[/b]



it's has a good nick diff and mint 3tc and t50...body is fine/ok I reckon it's worth 750[/b]

yeah I would say it is worth close to 750, as brendan said the motor/box seems good and the bod is fairly tidy considering it hasnt had a respray or nothin....

[ToyT-18]

<{POST_SNAPBACK}> (index.php?act=findpost&pid=379450)
it's not that neat, it's actualy got a few dents in it! bit of under body damage that I'm aware of but he wants 750 for it, and it's definatly not worth that much 450 if that[/b]



it's has a good nick diff and mint 3tc and t50...body is fine/ok I reckon it's worth 750[/b]

yeah I would say it is worth close to 750, as brendan said the motor/box seems good and the bod is fairly tidy considering it hasnt had a respray or nothin....
[/b]

I don't wanna spoil your moment, I will agree to some point it still can be worth for what it looks like but I knew the old guy and saw I saw him the other day and asked him about it and he basical ripped off franks wrecking yard, after owning it since new it was in a big accident it the front end so it's all been replaced, pretty much the whole car was fucked at one point, so it has had a respray it the front end anyway

[ToyT-18]

sorry it's been so long have been busy at work haven been home much, just having trouble keeping up with things started doing the car up slowly as i drive it every day, i know it looks like i mess but meh you get that, it has to be done latter anyway just want the colour on so i know what it will be like then its getting sent into body works for it to be done properly, now that i have a good job i can afford it but looking at it i thought maybe 2 tone but nah CBF, i also have just quickly modded a spirit duck tail to suit my car and i think it looks cool
http://www.rollaclub.com/board/uploads/monthly_11_2007/post-607-1194253927_thumb.jpg
http://www.rollaclub.com/board/uploads/monthly_11_2007/post-607-1194252561_thumb.jpg
http://www.rollaclub.com/board/uploads/monthly_11_2007/post-607-1194252898_thumb.jpg
http://www.rollaclub.com/board/uploads/monthly_11_2007/post-607-1194252729_thumb.jpg
also got my 2tg stuff so its all going along quite well, just about to get the pistons done cause I'm doing a hybrid convertion, that will cost me some money aswell, but since last have got a pair of sizuki sierra front shocks in the rear of the car, brand new from work GT gas work a treat stiff as, only 2 inches of travel from where it sits to where it stops when you lift it in the air, the exhaust is also running under the diff now with has actualy mad a noticeable difference to performance, not very much but noticeable to me, also put a bit of garden edging for the front lip looks ok but thats what you get for garden edging,

[ToyT-18]

http://www.rollaclub.com/board/uploads/monthly_11_2007/post-607-1194256653_thumb.jpg
http://www.rollaclub.com/board/uploads/monthly_11_2007/post-607-1194256779_thumb.jpg
http://www.rollaclub.com/board/uploads/monthly_11_2007/post-607-1194256880_thumb.jpg
http://www.rollaclub.com/board/uploads/monthly_11_2007/post-607-1194257032_thumb.jpg
http://www.rollaclub.com/board/uploads/monthly_11_2007/post-607-1194257142_thumb.jpg
Here's my bits and peices also have a block and all that is 2tg but i have fuel injection and side draft mani, so i'll get it in the car with side's and get it going then put the fuel injection on it, and get it going, and then i'll put the turbo on it witch arrived on friday witch is a ct20 in good working order,

will try and keep everyone posted with progress

Cheers Sean

[ToyT-18]

hey guys I'm back and the t-18 is starting to be done again as i have been very busy with my conversion of a 5sge into my st162 celica, i finally have time to do things slowly and i've now started on stripping it back to nothing at all and re painting it, and building up a mean motor
http://photos-a.ak.facebook.com/photos-ak-snc1/v319/32/7/587405912/n587405912_1189280_6454.jpg

http://photos-b.ak.facebook.com/photos-ak-snc1/v319/32/7/587405912/n587405912_1189281_7264.jpg

http://photos-c.ak.facebook.com/photos-ak-snc1/v319/32/7/587405912/n587405912_1189282_8044.jpg

http://photos-e.ak.facebook.com/photos-ak-snc1/v319/32/7/587405912/n587405912_1189284_9633.jpg

http://photos-912.ll.facebook.com/photos-ll-sf2p/v336/32/7/587405912/n587405912_1194787_6148.jpg

http://photos-912.ll.facebook.com/photos-ll-sf2p/v336/32/7/587405912/n587405912_1194790_8684.jpg

http://photos-912.ll.facebook.com/photos-ll-sf2p/v336/32/7/587405912/n587405912_1194791_9498.jpg

finally got my list of engine parts organised but they due to expenses it will take me a while to get these parts

lightened flywheel
custom pressure plate
custom clutch
BRD racing pistons compression of 13.8:1
rods
CT-1 coted bearings
ARP head stud Kit
ARP main stud kit
ARP carnkshaft pully bolt
ARP clutch bolts
ARP Flywheel bolts
stronger lifters
full balanced rocker assemblie: Comes With Rockers, Collers, Stands, and Micro-Polished Shafts.
hardened pushrods
double valve springs
Bronze valve guides
BRD Custom Titanium Valves
High Volume oil pump
steal sump with double kickout
Windage tray
BRD racing timing Gear drive
2 peice timing cover
side draft manifold, new webbers, also a 4 barrel holly intake manifold
Schoenfeld Header
EGR Plugs
High Performance water pump
racing alternator
spark plug bar
Fuel Pump block off plate
Lightened crank pully
lightened water pump pully
also getting the biggets cam i can get then getting it reground for longer durationg
and I'm also trying to sorced a 3' wide gilmer drive setup for the t motor,

all these parts come to a hefty price but it doesn't worry me as I'm buying good stuff
at all comes to $6,330
and will be building the motor up over time as money will be no issuse while I'm in the RAAF