View Full Version : MrMatt's Phantom 86

22nd September 2006, 08:56 PM

thought i might put some pics up of my 86 in here.

Its just a stock ADM 86. i bought it basicaly as a shell that ran and drove.
this is it after i sanded it back. it did come with bonnet bumpers and hatch etc. but no interior cept the amount of dash shown in the pics
this is it now. the tape is only there because the windscreen just got installed

22nd September 2006, 09:45 PM
Looks pretty good to me http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif

22nd September 2006, 09:48 PM
Looking tops so far mate

22nd September 2006, 09:52 PM
Can't wait to see a HUGE front mount in that hole.

29th May 2007, 07:22 PM
OK update time.
Since last post i have bought some fixed back bucket seats and harnesses for the front. Purchased and fitted a disk brake rear end with 2way. My 4AGE is at the engine rebuilders getting all machined for rebuild. Fitted and wired up my twin fuel pumps and fuel lines. Front struts getting converted to coilovers (should see them in a few weeks). Got my adjustable 4 links and penard rod on there way. Bought some very tasty rims. Flared Guards and painted my car Ford Phantom Purple(Again, already had car painted then bought my tasty rims). thats about it atm. I dont have a pic of the car as it is atm. but i do have one from the other day when the drivers door had to be repaired.
Rims on but guards not flared.
Guards flared but not finished.
Guards in primer ready for paint.
All done. the drivers door is all painted now.

29th May 2007, 07:43 PM
those guards look great man

31st May 2007, 09:12 PM
Looking good, what are the specs on those rims?

31st May 2007, 10:21 PM
SSR formular mesh 15x7.5 -22 (front) and 15x8 -22 (rear)

(specs taken from Jasons For sale thread).

They look to be Jasons SSR's!! correct me if im wrong.

1st June 2007, 05:34 PM
SSR formular mesh 15x7.5 -22 (front) and 15x8 -22 (rear)

(specs taken from Jasons For sale thread).

They look to be Jasons SSR's!! correct me if im wrong.[/b]
yes. you would be correct. checrs mate http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif

1st June 2007, 05:53 PM
phat matt yew

3rd June 2007, 12:45 PM
nice car mate, looks hot

4th June 2007, 11:27 AM
how easy was it doing your rear guards?

4th June 2007, 12:44 PM
good to see some quality for a change, nice work!!

Rims=Little bit sexy

4th June 2007, 04:45 PM
tuff lookiin gaurds gunna look like an animal when its done

23rd July 2007, 01:56 AM
can you repost your pics ?? especially the ones showing the progress of your flared guards:)

1st January 2008, 04:48 PM
Wow its been a while. Well there really isn't much progress happening hey due to a big fuck up of mine that has put me in some debt. Well i kinda thought is was a good idea to take the old ladies car fro a spin while i was intoxicated. yea moral of the story is don't DRINK AND DRIVE KIDDIES!! On a lighter note, i got the engine in and running, still need to do the exhaust tho. so yeah heres a few pics for ya.
Sorry for the big pics

Sorry mum. ok so i hit a rock wall at around 80kph and she flipped on it lid. so many air-bags. this was back in September. pending court date

obey wan boenny
1st January 2008, 05:09 PM
shiiiit! shame about your mum's car man. Your car looks like it's coming along nicely though :)

2nd January 2008, 10:24 PM
so your mum drives your car now??

2nd January 2008, 11:50 PM
<div class='quotetop'>QUOTE (Gilly @ Jan 2 2008, 09:24 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=462085)</div>
so your mum drives your car now??[/b]
Bingo. But its a Honda Civic. you can see it in the second pic.

3rd January 2008, 09:36 AM
Ok as per request im goin to repost the guard flaring pics. so here they are.
before work began
Grinding all the crap off the guard
To get a good amount of flare without creasing the guard we had to cut the shit out of it then weld in pieces to strengthen it again.
Rear guard before
that is how they looked after the flaring. note that we didn't have to weld or cut anything in the rear. all we did was stretch the metal out with a ball pien hammer.
smoothing up the rear guards
bare metal glory. good from far but far from good.
ready for paint
Finished Product

3rd January 2008, 03:19 PM
this things hot as! love the colour scheme with the purple body n gold centres looks nuts
out of curiousity what seat belts/harness u using?

3rd January 2008, 05:35 PM
<div class='quotetop'>QUOTE (w84me @ Jan 3 2008, 02:19 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=462370)</div>
this things hot as! love the colour scheme with the purple body n gold centres looks nuts
out of curiousity what seat belts/harness u using?[/b]
Thanks man. yea running RPM harnesses and for seats ive got a Sparco Jr drivers seat and a DBX Racing fixed back for passenger.

ghetto ke
20th February 2008, 01:05 PM
<div class='quotetop'>QUOTE (MrMatt @ Jan 3 2008, 09:06 AM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=462257)</div>
Finished Product

Looks so much fatter!!!

20th February 2008, 08:12 PM
yea it looks so much better now. real clean. well i finally went to court for my drink driving. yes its been 4 months since it happened and i only just now have been to court. well i wont be driving for the next 10 months so i guess its time to pull my finger out and get her on the track. i had to pull my diff apart due to the fact its making bad noises and such. also gonna make some track pipes since it will be a while since i can drive on the road again. thought i might post some clearer pics from a real camera and not a crappy phone camera. let me know what you all think.

20th February 2008, 08:45 PM
fuck that looks nice man, clean as

ghetto ke
20th February 2008, 11:14 PM
looks even better in focus :lol: well done man

obey wan boenny
21st February 2008, 09:51 AM
very nice. looking at yours makes me want to lower mine even more.