PDA

View Full Version : brendans 20V AE86...... soon to be beams powered



Pages : [1] 2 3 4

dr1ft-pig
14th November 2006, 01:48 PM
hey all this is my ae86 sprinter modifications include:

4age 16v bigport...stock as, it's slow
been converted from brown interior to blue
15" superlites
respray
trd front lip
rooted t50 lol
kyb short stroke shoks all round
lowered king springs in rear
kyb springs in front unsure of weight

thats all I can think of 4 now so here are some pics...tell me what you think
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/108945.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/108944.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/111113.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120280.jpg

:2thumbs:

UPDATE!!! 14.12.2006

I have recently lost my licence and the hachi is off the road for 6 months, so the transfiormation has started, I'm just doing a few little things at the moment like removing sound deadner, getting the motor ready to come out by pulling of un needed things like the a/c compressor and condenser etc. when I get some more cash in my pocket ill be buying a custom bellhousing for a w series box, and a microtech ecu to run my 20v, but anyway here are some pics of my progress for now, ill keep you all updated

sound deadner out of the boot so far.
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120281.jpg
rear interior panels all gone :2thumbs:
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120282.jpg
my silvertop 20 valve
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120283.jpg
my t series rear end with 4.1 locker
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120284.jpg


UPDATE!!!!! 24.3.2007

well it's been a while since I have updated... well I havent done too much I have really just been accumulating parts and money to finish it of... but anyway here are a few more pics to keep yas goin... hope you likey

motor is mounted
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120285.jpg

my new black dash cluster surround
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120286.jpg

new engine mounts
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120287.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120288.jpg

started painting inside where deadener has been removed
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120289.jpg

and the microtech
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120290.jpg

UPDATE!!!!! 4.4.2007

well havent done anything more to the car itself since last updat accept sussing out my method of wiring the microtech and came to the conclusion that to make it a neater wiring job I will need a new loom so I purchased a 99% complete blacktop wiring loom for $150. I also drove to brisbane today to track down the rest of my rwd cooling kit from anthony kellam that waited 3 months for then only got half of it, so I had to drive 3 hours to brisbane to get the rest of the parts I didnt want to wait another 3 months for and also realised I didnt post a pic of my 4ag/w5x bellhousing so here's some pics hope you like


the cooling kit
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120291.jpg

the loom
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120292.jpg

the bellhousing
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120293.jpg

UPDATE!!! 12.4.2007

well havent done too much to the car since last update, I put the quads on and put my new pintara rotors on my t series now just doing measurements for the custom calliper brackets

here's a few pics:

quads are on. :2thumbs:
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120294.jpg

new brakes, rotors need machining but can't complain for free diskies
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120295.jpg

UPDATE!! 8.5.2007

well another update..... havent done a great deal lol I have knocked the sound deadner out of the front half of the car now and have had the cops called twice for doing it(noise complaints lol) glad thats done...also got my new wheels they are longchamp xr4's in 14x6.5 unsure on offset I think 1 pair is +10 and unsure on other but they sit well on the hachi...also got my oil cooler kit almost finished I have everything installed bar the cooler as I don't have it yet... made custom oil return fitting for the sump...forgot to take pic b4 it went back on the car but yeah... will have the wiring started in a few weeks as I have to take my car to clemo55's workshop to do it and I'm not doing that till I have fully paid for my w58 which will be paid for soon hopefully and then ill be able to throw the whole running gear in it and wire it and it should move lol then I just need to get extractors and an exhaust made and a set of trumpets and I should be able to drive it... will do the un neccesary mods while it's on the road as I have a very strong urge to drive it :P anyway here's a few pics: :2thumbs:

deadner all gone:
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120296.jpg

longchamps (needs lowereing)
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120297.jpg
edit now lowered on falcon SPRING lol just cut 1 in half might need another 1/4 coil off
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120298.jpg

oil cooler sandwich plate:
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120299.jpg
note the model of oit filter haha crazy coincedence it cam with my 20v
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120300.jpg

UPDATE!! 29.5.07

got a little more done on the car today, I have nearly all the interior floor painted with the deadner removed(it's going to be fukn loud in there) and threw a few stickers on the window (madhouse represent :P )
also got the oil cooler mounted and hooked up
here's a few pics

interior paint:
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120301.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120302.jpg

oil cooler through cut out front bumper
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120303.jpg

and a couple o stickers :P
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120304.jpg

thats about it for now,almost finished paying for my w58, so when thats done all the diff and everything goes in and then wiring and exhaust

UPDATE!!! 13th july 2007

well my rego ran out today, but also got my w58 and have mated it up to the custom bellhousing , tomorrow ill pull the motor out and bolt the flywheels and clutch up then throw the box on for a test fit and take a few pics, here's a pic of the box for now


w58
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120305.jpg



MORE PIX A FEW POSTS DOWN AS I REACHED LIMIT GO DOWN FOR UPDATE!!!!
MORE PIX A FEW POSTS DOWN AS I REACHED LIMIT GO DOWN FOR UPDATE!!!!
MORE PIX A FEW POSTS DOWN AS I REACHED LIMIT GO DOWN FOR UPDATE!!!!

ke70dave
14th November 2006, 02:27 PM
loosk pretty schmick mate!

somethign weird is goin on with that last picture though:P, looks like your car is waaaay out of square, and your running a heap of positive camber front and rear!!

got any plans?

green_boy_91
14th November 2006, 02:30 PM
oh yeh hahaha i think the guy that took the picture moved wen they took it im guessng,
ps ur cars in bute condish lol http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

steroidchickens
14th November 2006, 02:32 PM
car looks good. hows the diff centre going?

Stuck
14th November 2006, 11:31 PM
this car should of came with a 20v didnt it?

I saw it on carsales.

GTVAE86
15th November 2006, 09:35 AM
Nice. Looks bloody clean.

DRFT - 86
15th November 2006, 01:26 PM
hope it gets transformed while its off the road bro... hehe

dr1ft-pig
15th November 2006, 11:37 PM
UPDATE!!!!!!!!! 21.7.2007

got a little bit done today, mounted the gearbox the motor, mouted starter, and started making a fibreglass cover for the crank angle sensor, got the car out of the shed for a while also so took a few happy snaps, hope you likey, should be an updat just about every week from now on as it's getting closer and closer to being done

here's some piccys

box mounted to motor
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120432.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120433.jpg

starter mounted
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120434.jpg

fibreglass cut and shut CAS cover
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120435.jpg


and a few happy snaps while the old girl was outta the shed
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120436.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120437.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120438.jpg

feel free to comment on progress, cheers guys hope you like

brendan

another little add to the guage department so I don't have to have a big gay monster tacho with full hektik massiv shift lite broooo

it's an autometer DPSS has 4 digit rev display with small but bright LED shiftlight, needed this as I couldnt be farked buying the secial plug for higher rev signal in my other one, I think this one displays up to 10 or 11k rpm so pretty happy with it, I swapped it for my other shiftlite (thanx timmay) here's a pic

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120439.jpg

brendan


UPDATE!! 20/8/07

got rear end pretty well completed, will have rotors in 2 weeks for AJPS then it will be ready to go in the car, wont put it in yet as its a prick to push with a CIG in it haha, also should have dizzy cover ready by the end of the week, i kinda broke it so i gotta fix it, getting flywheel machined this week so i can put clutch on and then motor and box should be mounted by the weekend and hole cut back a lil bit for shifter to come through, thats about it for now, heres a pic of the rear end, more pics later in the week when motor and box are in, enjoy

brendan

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120440.jpg


UPDATE!!!!!!!!! 23RD AUGUST 2007

well, i got alot done yesterday and today i fixed the problems that popped up in yesterdays work so time for an update

i got flywheel machined,new spigot beearing, new throwout bearing and carrier, and then put it all together i forgot to take pics of the process of putting it in, but i got a few snaps after i was finished and les stressed and could actually hold the camera without getten angry lol, anyway heres a few pics


NOTE: havent put all bolts in yet as i dont have them, will put bols in when i get cash to buy some

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120441.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120442.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120443.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120444.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120445.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120446.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120447.jpg

hope u like, will start wiring on sunday and hopefully get a fair bit done through the week

enjoy!

UPDATE!!!! 6th september 6.9.07

got coilovers today from mark at banzai, they have what im pretty sure is cusco cambertops and unsure on shocks and spring rate, estimated to be around the 6-8 kg mark any way heres a pic...

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120448.jpg

i will be modifying theese to go onto my struts and painting them up all neat n shit, should be done on sunday, more pics then :D


UPDATE!!! 18th september 2007

hey all i have finished coilovers and they sort of went well, first of all i had trouble with the threads in the struts and gland nuts aswell but i managed to get them in there very ghetto, i will be building new strut tubes when i get some good shocks as well but theese will work for the time being, also they dont go low enough so i need some shorter springs, and last of all i cleaned my shed so i can now walk all the way arpund my car without haven to step over anything haha

people who know me know i dont tend to clean up until things get really bad or i get really bored haha

anyways here are a few more pix, there will be another update tomorrow, interior paint will be done, cheers

cambertops
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120449.jpg

ride height, (at lowest setting) :wtf:
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120450.jpg

my car in my dirty ass shed
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120451.jpg

my car out of my shed that is clean
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120452.jpg

keep an eye on this thread tomorrow night for updates as i should have interior done :rolleyes:

madrift
18th November 2006, 10:16 AM
yeah, cheers for the drive the other night boys, hope the rebuild goes well.

dr1ft-pig
21st November 2006, 02:10 PM
thanks man going to pull motor out in a few weeks im making to most of my last week of driving it 4 a long time

LordNafe
21st November 2006, 05:20 PM
You may not feel the need to super charge it after getting the 20v.
It'll be a fair bit faster man.

DRFTPG
21st November 2006, 10:34 PM
man thats nice, im sure i saw it today

dr1ft-pig
21st November 2006, 10:59 PM
where abouts man?

dr1ft-pig
14th December 2006, 12:51 AM
update bump

Robo86
16th December 2006, 10:59 PM
looks good mate, like your plans! hope it all goes well

dr1ft-pig
18th December 2006, 03:46 AM
thanx mate the conversion should be getting underway in the next week or 2 just have to get a few more things and i can start oulling stuff out of it

dr1ft-pig
19th December 2006, 10:53 PM
i wanna get 10,000 views like gilly did lol

DRFTPG
11th January 2007, 10:12 PM
where abouts man?[/b]

in lismore somwhere, maybe it wasnt you but it was some kinda red hatchi haha

(sorry about the slow reply)

dr1ft-pig
12th January 2007, 08:25 PM
could have been me, but there is also another red hachi getten round with ssr mk2's i think it has a gze in it, his name is joellae86 on here

dr1ft-pig
24th March 2007, 01:16 PM
UPDATE BUMP MORE PICS!!!

Zak
24th March 2007, 03:26 PM
Are you still planning to do the SC 20V? As you probably know thats the same setup I have, If you need any info, or advise on it feel free to send a few pm's my way.

Cheers http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

dr1ft-pig
24th March 2007, 03:30 PM
na wont be doing that.... maybe if im not happy with the power of the 20v after i throw the biggest cams i can in it and flow the head a bit more with a set of slightly bigger injectors then ill think bout that...but for now its just getten it running

but cheers anyway man if i need ur help ill throw ya a pm

cheers

monkey
25th March 2007, 11:34 PM
looks hot man http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

should be pleased with it well done

monk

dr1ft-pig
26th March 2007, 11:13 AM
cheers man... well once the engine is running i want to get some kind of adjustable gears trd shims for the valves and a set of cams with mass duration say 300+ i luv a tuff idle lol

but yeah depending on my wiring skills it should be running in a few weeks then i need to find a w58 as i already have the bellhousing and custom mount to suit

ke70dave
26th March 2007, 11:27 AM
project is coming along very nicely!!

its interesting how less cluttered a 20V looks compared to a 16V (in engine bay), so much less "stuff" in there http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

yet so much cooler http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif

dr1ft-pig
26th March 2007, 11:45 AM
thanks mate... i cant wait to get the quads on there and see how it looks... i need to get or make sum trumpets for them... then some extractors aswell
im going to get some made like the ones on some jap cars how they curl right up then go down i think they look hella good

timmay
1st April 2007, 10:17 PM
ive been lucky to see this thing start to where it is now as brendan is my cousin for all that dont know.. its gonna be choice when its done and will be a perfect example of what a 20v hachi should look and go like ... good shit brendan get it done soon so we can have fully hectic battles lad hehehehehe.. http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif

Ade_Mc
2nd April 2007, 08:53 AM
wow, bro thats a smick looking motor,
i am planning to do a 20v conversion.
but was wonder, its not a big process to convert to SC form 20v?
internalls, inlet, etc need changing? http://www.ae86drivingclub.com.au/forums/emoticons/blink.gif
...i've never tried an engine swap! but plan to.
i heard its easy starting with a 4AGZE?
are there any advantages to the 20v?

nice ride dude
http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif

ade-

dr1ft-pig
2nd April 2007, 09:53 AM
wow, bro thats a smick looking motor,
i am planning to do a 20v conversion.
but was wonder, its not a big process to convert to SC form 20v?
internalls, inlet, etc need changing? http://www.ae86drivingclub.com.au/forums/emoticons/blink.gif
...i've never tried an engine swap! but plan to.
i heard its easy starting with a 4AGZE?
are there any advantages to the 20v?

nice ride dude
http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif

ade-[/b]


hey man thanks for the kind words...

as for supercharging the 20v i think the stock internals should handle a small amount of boost fairly reliably.. if you want a SC your better off going with a gze..... but this all depends on your driving style, well pretty much how your going to drive the car and what u want to do with it....this has been covered in many topics before so i wont go too far into what the pros and cons are of the 20v as oppose to the gze....pretty much they have pretty much the same power figure standard but all the torque curves n shit are different the 20v revvs alot harder and makes its power up high as a gze has power from down low but has fuk all up high....

lol my 2c

dr1ft-pig
4th April 2007, 11:40 PM
UPDATE 4.4.2007 PICS FIRST POST

madrift
5th April 2007, 12:10 AM
looking good mate, saw the yellow ke as well, good job.

dr1ft-pig
5th April 2007, 12:18 AM
thanx man.....pretty proud of the ke hey its my first successful conversion and first attempt at a conversion.....now mine i hope to be successful as well lol

DRFTPG
5th April 2007, 09:11 PM
watercooling looks good brendon, how long till shes running?

dr1ft-pig
5th April 2007, 09:55 PM
thanks man but i didnt do it, thats the work of ant at kaizen garage...ill get stuck into it this weekend and should have the water kit installed and then I'm prob just goin to spend the weekend working out wiring... and drilling out my new pintara rotors and maybe start on the custom brackets for the pintara calipers.... but whether i feel up to doing all that is another story....

hope to have it done in the next 2 months so around the end of may...

dr1ft-pig
12th April 2007, 04:40 PM
update bump 12.4.2007

dr1ft-pig
8th May 2007, 01:52 PM
update bump 8.5.2007 comment away

pics first post

DRFTPG
8th May 2007, 05:56 PM
looks so good with the longchamps, cant wait to go for a drive when ur finished http://www.ae86drivingclub.com.au/forums/emoticons/cool.gif

mick22
11th May 2007, 11:18 AM
Hey Brendan,

Your car is looking hot, cant wait to see it hey. keep it up, not long now till your back on the road lol http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif

dr1ft-pig
11th May 2007, 07:20 PM
cheers man... lol not long till IM back on the road... cant really say the same for the hachi though... cash flow is low atm and i need to pay a fine n shit... sux ass but all will be worth it when i can drive again

choonga
15th May 2007, 03:19 PM
Looking good dude!

James86
23rd May 2007, 08:55 PM
sweet build up dude, props.

dr1ft-pig
23rd May 2007, 09:28 PM
cheers fellas shuld be done in the near future

wiring should start in a week or 3 i hope

bahnugget
24th May 2007, 09:42 AM
awesome build up dude this things gunna be a monster http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif

have to get some full sick hachi battles on QR one day http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

dr1ft-pig
24th May 2007, 12:27 PM
thanx man, yeah ill be keen as for sum battles when i get used to drifting on track 4 sure

rick q
24th May 2007, 12:28 PM
have to get some full sick hachi battles on QR one day http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif[/b]

i am waiting for that day http://www.ae86drivingclub.com.au/forums/emoticons/wub.gif

Felix
24th May 2007, 06:34 PM
Hey man, If you dont mind me asking, how much is the W58 conversion costing you?

I'm considering the same path in my ke...

dr1ft-pig
24th May 2007, 07:37 PM
i got my w58 with mount, bellhousing and tailshaft to suit very cheap lol bought it out of a friends race car i think it costs around 2g to do it when u dont have hookups prob a bit more when u buy a clutch n shit

dr1ft-pig
29th May 2007, 07:30 PM
update bump

DRFTPG
31st May 2007, 08:02 PM
hurry up and get it done u lazy bitch haha put that money in for u today, hows driving going, havnt lost it again yet? http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

dr1ft-pig
1st June 2007, 12:13 AM
lol yeah licence is good, but the c**ts only gave me 1 point grrr ahh well

i saw a few mates today while i was is the industrial estate, and the 20v is going down to ballina in about 2-3weeks to be wired and get an exhaust made and that will be the conversion done, then i just need to get my ass sum spare cash to build my custom coilovers and find some jdm rear brakes with handbrake cables and all should be set and driving, the rest of the mods can come at a later date i just want to drive the fucking thing now, havent been for a slide for so long, mind you i do all my sliding in a completely controlled and non public environment **winks**

DRFTPG
2nd June 2007, 11:38 PM
mind you i do all my sliding in a completely controlled and non public environment **winks**[/b]

** looks at dr1ft-pigs youtube videos** hahaha nooo u dont do street drift brendan http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

dr1ft-pig
4th June 2007, 10:22 PM
me??? never http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif



u will have to come to my controlled unpublic environment 1 time and go "legal sliding" http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif

DRFTPG
5th June 2007, 05:48 PM
u will have to come to my controlled unpublic environment 1 time and go "legal sliding" tongue.gif tongue.gif laugh.gif laugh.gif[/b]


haha sounds good

starni_boy
10th July 2007, 10:48 AM
how much did the bellhousing set you back? $600 ish?

dr1ft-pig
10th July 2007, 10:55 AM
about that, got it second hand but, so i got it a lil cheaper

dr1ft-pig
13th July 2007, 04:28 PM
update bump more pics first post

starni_boy
13th July 2007, 04:47 PM
nice! i can't wait until i start my 20v conversion, although it's a few months away still after suspension and paint, i still can't wait. engine looks so hot aswell!

so how much longer you think you got on the build? few months still?

dr1ft-pig
13th July 2007, 04:50 PM
depending on cash i got about 1-2 months, i need to get it done before the september cruise

DRFTPG
13th July 2007, 04:55 PM
finally got the box ey, took you long enough haha can't wait to go for a drive in her, we did clintons stereo today, sounds pretty good

dr1ft-pig
13th July 2007, 04:58 PM
sweet as, yeah got it all here ill bolt it up to the motor tomorrow if im not too hungover lol and ill get some more pics

86xxx
14th July 2007, 07:13 PM
Looks good mate, also seems you've picked up a steel sandwich plate variant of the w58, stronger bearings apparently. :2thumbs:

dr1ft-pig
15th July 2007, 10:11 AM
got her cheap too B) lol ,i hope it holds up to what im going to give it

burado
19th July 2007, 02:11 PM
You'd better look after that box!!!
12 months in my race car and no problems.
I did sell it to you too cheap too. Oh well call it sponsorship..

dr1ft-pig
19th July 2007, 06:17 PM
oh yes sponsorship, horaah...mmm sponsor me some coilovers jase hahaha

DRFTPG
19th July 2007, 06:42 PM
oh yes sponsorship, horaah...mmm sponsor me some coilovers jase hahaha[/b]

haha you cheap bastard :P

dr1ft-pig
19th July 2007, 06:55 PM
they will come

Felix
20th July 2007, 09:25 PM
bah, mine are sitting on the floor in my room...

my cars considerably faster now that I've paid for them lmfao

hilton
20th July 2007, 10:10 PM
lol^^

dr1ft-pig
20th July 2007, 10:51 PM
coilovers make your car faster??? takumi told me that so it must be true, haha

Felix
21st July 2007, 06:21 PM
I think dillon mac told me LMFAO... j/k

but serously my front ones are going in tomorrow

if your up this end brenden pop around, there will be full workshop in my street (we have 7 cars now) and my brothers panel beating his ute, should be good

dr1ft-pig
21st July 2007, 07:37 PM
sweet as prob be up in the next few weeks



UPDATE BUMP GEARBOX MOUNTED AND CUSTOM CAS COVER NEARLY DONE

DRFTPG
23rd July 2007, 08:46 PM
looks schweet brendon, looks awesome with the interior all painted.

r3zzz4
23rd July 2007, 09:03 PM
You'll have to come round to Perry's this weekend Brendan and help us fiberglass the front bar back together after our rally efforts on friday night :lol: .
Get those footwells painted and your interior will look super schmick.
Don't we all get sponsorship from Jason??? maybe we need bigger stickers for REAL cheap stuff eh?

dr1ft-pig
23rd July 2007, 10:22 PM
your a silly boi dane'O lol yeah I'm going to wire up the starter motor and give it a turnover this weekend, might leave doing all the seals for a later date, I'm just going to do head gasket and shit (trd 0.5mm) so I can get this shit on the road, ill take my flywheel to get machined wednesday and bolt the clutch up and I gotta get a throwout bearing carrier and I can mount box and shit, I'm going to lay my wiring loom out tomozza and try get that shit sorted but yeah might give ya a hand on the weekend, I'm going to buy some paint and finish the floor and shit this week, and then all I need to do is get my tailshaft and brakes and all drivetrain will be bolted in, so hopefully I don't get scared by all the wires and get some motivation to do this loo and all will be good

dr1ft-pig
24th July 2007, 06:32 PM
started on loom today so should have that completed on the weekend and most probably get box and motor mounted into the car

DRFTPG
25th July 2007, 10:09 PM
all the hard work will be payed off soon brendon, can't wait to go a "cruisy trip around the block"

dr1ft-pig
25th July 2007, 10:17 PM
yeah it's giving me a lot more self satisfaction learning how to do everything myself, I'm no mechanic and I've done everything from start and most probably to finish y myself, so anyone that sees this car when it's done I think will be pretty amazed at what an amature can do, I'm trying my very best to make this conversion as neat as possible, so it will be a not only very neat conversion but a very strong converion as it's got the w58 and t series, so should be very reliable aswell, ill be very proud when it's done as I've done every single thing myself

I'm rambling lol I'm drunk ill update this weekend, gearbox and loom should be in he car ill keep yas posted

DRFTPG
25th July 2007, 10:20 PM
haha you alcho :P but yeah it's so stafiing when you build something youself and it turns out exactly how you imagined it.

dr1ft-pig
25th July 2007, 11:31 PM
yeah I just went and had a staring session then haha, so keen to see it finished, I should have it winding over this weekend

Javal
26th July 2007, 01:43 AM
haha you alcho :P but yeah it's so stafiing when you build something youself and it turns out exactly how you imagined it.[/b]

Drinking on weekdays FTW!

dr1ft-pig
26th July 2007, 07:41 AM
hell yes, it's 638 am and I got no hangover yeew

dr1ft-pig
20th August 2007, 03:34 PM
UPDATE BUMP!!! new pics 1st page 7 or 8 posts down

Clinton
21st August 2007, 04:08 PM
seriously cant wait to see this bad boy. i have spent long nights thinking of it and what im sticking in its muffler :kiwi:

dr1ft-pig
21st August 2007, 04:18 PM
BWAHHA^^

update on friday people look out for it, big progress coming this week

starni_boy
21st August 2007, 04:31 PM
do you know how much further you need to cut the shifter hole?

20mm? or more?

cheers and good work on the build

dr1ft-pig
21st August 2007, 04:46 PM
ill let you know on the weekend man, i wont be cutting till box and shit is in the car, ill post pics n shit

350hp4agte
21st August 2007, 07:20 PM
hey mate sick build did you make or buy those 20valve engin mounts and the water pipes

dr1ft-pig
21st August 2007, 09:53 PM
cheers mate, the engine mounts are standard sprinter item that i sand blasted and painted, i got the water kit from kazien garage, not a bad job either

350hp4agte
21st August 2007, 10:17 PM
hey man u dont have kazien garage's number do u also how much was the kit


cheers mate, the engine mounts are standard sprinter item that i sand blasted and painted, i got the water kit from kazien garage, took 3 months to make :angry2:[/b]

dr1ft-pig
21st August 2007, 10:18 PM
got new throwout bearing and carrier today and also a ke70 throttle cable (cheers jase) getting flywheel machined tomorrow so might have the motor and box in tomorrow if not thursday.... ill keep yas posted

timmay
21st August 2007, 11:15 PM
yeah its comin along sweet.. we need to get a carton or 6 and make some progress. hehehe talk soon brother :lol:

dr1ft-pig
21st August 2007, 11:17 PM
6 cartons sounds good, if u want come round saturday and help me start wiring it

timmay
21st August 2007, 11:22 PM
are you gonna have the motor and box bolted back in by then..? :2thumbs:

dr1ft-pig
21st August 2007, 11:27 PM
will have motor and box in tomorrow, got luke coming round to gimme a hand with it gonna have crazy angle gettin it in ther, boltin box to motor then putting whole lot in together then ill cut the shifter hole out more pics tomorrow night, ill use digi cam instead of phone, need some good quality shit in here lol

DRFTPG
22nd August 2007, 04:28 PM
you better have progress pics for me tonight brendon :P

dr1ft-pig
22nd August 2007, 08:58 PM
not gonna bother tonight the gearbox x member is a bit out of shape so i gotta oxy it till itll fit, other than that got box and motor in and not quite mounted as the gearbox x member is wak, will have progress pics tomorrow night, i hate it when shit dont work, wiring will start this weekend

Driftspec
23rd August 2007, 12:19 AM
Its together! Nice work man :) Get it ready for the cruise!

Would love to see the engine gearbox combo from below, just out of interest.

dr1ft-pig
23rd August 2007, 11:28 AM
yeah ill take pics off everything once it in there properly, dont think this one will be making it to the cruise, i have to take a guy to a formal in it in i think its november so it WILL be ready by then, i am pretty pissed about the gearbox x member not fitting right but its an easy fix so ill do that this arvo, i got a job interview this morning so that comes first so i can get some dosh to finish this bad boy, also thanks for the kind words keating

ae71
23rd August 2007, 04:27 PM
this will be a very nice car when it get all together...

strong reliable and well prosented.

love in the mail ;)

dr1ft-pig
23rd August 2007, 04:49 PM
ooooohhh love sounds good, soon to be reppen kyouteki

dr1ft-pig
23rd August 2007, 07:53 PM
UPDATE BUMP, MOTOR N BOX ARE IN AND MOUNTED

obey wan boenny
23rd August 2007, 08:06 PM
I can't wait to see this beast at the cruise man, top stuff! :2thumbs:

deleta
23rd August 2007, 08:21 PM
if it ever leaves the shed :P jokes man love your car

Felix
23rd August 2007, 08:22 PM
ur build it nearly as quick as robs lol

get it done in the next 3 weeks (y)

hara_kiri
23rd August 2007, 08:36 PM
still havin my babies loose cunt hahaha, its a big wait for babies come on, cya on cruise penis breath, im gonna be dori'n the sil and runnin a muck hardcore

battle ya on track in the 86 vs 86 in september, jus got a bit a grindin and weldin to do

r3zzz4
23rd August 2007, 08:41 PM
Il be in your room when you wake up Saturday sexy man...

No seriously lets do the wiring and shit while I glass my bar back together then maybe drink beer to celebrate.

Will be uber radalicious to have another ae86 in area again, that actually drives it :rolleyes: lol

dr1ft-pig
23rd August 2007, 08:51 PM
this shit wont be done for the cruise, wel theres a possibility, it wont have and exhaust (just extractors) no filters with stock trumpets.... on another note, maybe it wont haha should be done not far after that so pretty syked, got throttle cable hooked up, so farkin smooth

and rob..... N/A is better :lol:

Felix
23rd August 2007, 08:55 PM
i read in the bible that turbo's make u gay

are u gay rob?

BouNCE-86
23rd August 2007, 10:43 PM
Better see this thing on the cruise dude...

Get cracking :P

dr1ft-pig
24th August 2007, 11:42 AM
if i had the cash to get it done id be able to get it done in time but its not gonna happen hey, i tried my best lol, it will be done soon enough

86xxx
24th August 2007, 12:12 PM
Looks good man, just 1 thing i noticed may cause you some trouble if its not corrected, the shifter doesnt seem to be cenralised in the tunnel?? if it's off line it will more than likely cause some unnecessary vibrations and wearing of uni joints even. Just thought i'd point that out, sure you've already noticed it yourself hey?!

dr1ft-pig
24th August 2007, 12:27 PM
yeah its weird, the box is centralised its on a lean though??? its all fucked up it seems to be straight though if not ill fuck with the mount some more
the mount was in a ae86 previously, and the box i have was the box that was in the car also, even the bellhousing, so i really dont know whats gone wrong, meh not hard to fuck with

cheers for the kind words man

86xxx
24th August 2007, 12:54 PM
I'd say its either the bell housing is twisted in relation to the 20v or the engine is on a lean?

dr1ft-pig
24th August 2007, 02:34 PM
yeah not sure hey, once wiring is done i think ill take it down to clemo55's workshop and get it on the hoist


but on another note, got wiring started, the loom is installed into the car n shit, and all the wires are just taped to where they have to go as im not really game enough to cut anything yet, im gonna get a mate to come and actuall connect everything up n shit i just wanted to make a start on it

keiichi
26th August 2007, 01:34 AM
i havnt looked at this thread in ages.... cars looking great man. 20v ftw! when does power kick in and when does it level out? drove one once, and they pull hard, love those engines.
so you got a t-series eh (y) unless i missed something, is it still open? going for lsd or locker?

dr1ft-pig
26th August 2007, 06:18 PM
yeah man got disk brake kouki t series, 4.1:1 locker, locker love, so farkin predictable, i really need some front suspension hey it will be the first thing on the list after it drives, choppies suck when u got gay shox

cheers for the kind words bro

DRFTPG
28th August 2007, 10:22 PM
sucks it wont be ready for the cruise brendon, oh well you can take me for a drive some other time

dr1ft-pig
28th August 2007, 10:25 PM
will be done for the next one i hope, if the date isnt set too soon, ill organise another cruise for like 2 months after this one, so we can get big numbers happening

keiichi
29th August 2007, 12:59 AM
yeah man got disk brake kouki t series, 4.1:1 locker, locker love, so farkin predictable, i really need some front suspension hey it will be the first thing on the list after it drives, choppies suck when u got gay shox

cheers for the kind words bro[/b]

yeh locker is great... essentially a home made two way lsd with instant locking force.

dr1ft-pig
29th August 2007, 12:40 PM
dam right, i laugh at people who spend thousands on brand new 2 ways n shit, i really don't see the point, and its got 4.1:1 gears too all i need is rotors and it will be a complete rear end

dr1ft-pig
6th September 2007, 07:14 PM
got theese bad boys today thanks to mark at banzai, i will be cutting the sleeves off and putting them on my struts as 1 stub axle is bent


http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120448.jpg


sigma arms coming soon!!!

Clinton
6th September 2007, 07:45 PM
brendon you Mc-FUCKING-weapon

when i do get to see some vids of this in action huh huh huh huh huh!?!

"spirited mode"

dr1ft-pig
6th September 2007, 08:11 PM
hopefully soon ahy its killing me not driving it, was sposed to be ready by september 23 cruise but its not looking good lol next cruise for sure, it needs a good spirited drive

ae71
6th September 2007, 10:29 PM
what coilovers are they...??

Felix
6th September 2007, 10:47 PM
homebrand

honest!

dr1ft-pig
7th September 2007, 02:43 AM
custom jobbies from japan, crazy japs put fuckin alloy gland nuts in em and i cant get the fuckin shox out to see what they r, im drunk as fark and i like that shit haha, they will be brendan spec by the end of the weekend

70XIN
7th September 2007, 12:03 PM
you need an air-powered rattle gun then :P

dr1ft-pig
7th September 2007, 12:06 PM
the gland nut is the part that holds the shock in the strut tube, its round with a few holes in it

ae71
7th September 2007, 12:34 PM
yeah i would be fairly doughtfull that you would find a socket long enough....

Bustin_86
7th September 2007, 01:44 PM
Pipe wrench

70XIN
7th September 2007, 03:42 PM
yeah i would be fairly doughtfull that you would find a socket long enough....[/b]

magic socket

?

okay i give up

and he's the one drinking not me?!?!

okay now i know what you're talking about. i was thinking of the gay nut that likes to spin spin spin on top of the shock

the gland nut i got off with a bunsen burner and vice grips? cant remember these days

Bustin_86
7th September 2007, 04:04 PM
I just used a massive adjustable wrench... ie pipe wrench :P

Clamp strut tube, set jaws, push :)

Gland nut will get aalllll fucked up, but yeah, it will come off.

Be more gentle when you stick the new one on :P

dr1ft-pig
7th September 2007, 06:35 PM
i ended up just cutting the strut in half, inside sleeve (leftover strut inside threaded sleeve) wont budge, so im goin the get them machined back out to the right size and then use my good straight struts, should turn out good, there wont be pics up sunday now :( but ahh well, itll be done soon enough

Shogun
10th September 2007, 01:22 AM
pretty neat mann. keep up the good work =]

dr1ft-pig
10th September 2007, 01:24 AM
thanks man, will do hey, coilovers should be in tomorrow if all goes well, more pics if all goes well too :D

dr1ft-pig
10th September 2007, 12:23 PM
going to do coilovers in a few hours, pics up bout 7 tonight

dr1ft-pig
10th September 2007, 12:48 PM
2000th post.... yeeewww postwhore much?

dr1ft-pig
10th September 2007, 09:25 PM
all didnt go well, maybe tomorrow night, need a big press to get sleeves on as they are a tight fit

slide86
10th September 2007, 09:42 PM
the coilovers i got from japan both had TRD yellow short stroke shocks in em......and the gland nuts were farkin hard to get undone. i had to go the pipe wrench with a tube on it to get em undone

dr1ft-pig
11th September 2007, 04:24 PM
i molested the strut coz all i wanted was the skleeve, and after pulling the struts out of my car i have realised i have ra40 struts,brakes and steering arms which i always thought had more lock than my mates hachis,

vented brakes ftw

need a press to press sleeves onto strut and then i can put coilovers in, i cant get anywhere till after 5 :( and everything will be shut, dammit

ae71
11th September 2007, 11:05 PM
oh deer...

cant get them on by heating the sleave??

dr1ft-pig
11th September 2007, 11:47 PM
i dont have an oxy, pressing is good, i dont like heating stuff up lol, will all be in tomorrow arvo, i promise haha should be done by bout 5-6pm

70XIN
12th September 2007, 12:02 AM
Re-arrange freezer. Place struts in freezer

Come back a few hours later, go for gold.

dr1ft-pig
12th September 2007, 12:12 AM
no shit??? i dont have a freezer big enough only the gay spec one on top of my fridge, ill press em tomoz morning and should have em in tomoz arvo :)

Bustin_86
12th September 2007, 11:57 AM
Cold = metal contracts
Hot = metal expands

Heat sleeve freeze strut bang bang

I know your getting them pressed on, but its still handy to know for next time :P

ae71
12th September 2007, 02:14 PM
you can buy little heat torchs from places like bursons... not very expensive.. they are gas powered..

dr1ft-pig
12th September 2007, 08:42 PM
yeah got em pressed on today, went to put the gland nut in and it grabbed thread then went in slightl;y cross threaded, c**t so i fucked the gland nuts doing that and still ahvent finished em its pissing me off so hard,ill get some new gland nuts, DOES ANYONE ON HERE HAVE ANY IN GOOD CONDITION??

dr1ft-pig
18th September 2007, 10:36 PM
UPDATE!!! 18th september 2007

hey all i have finished coilovers and they sort of went well, first of all i had trouble with the threads in the struts and gland nuts aswell but i managed to get them in there very ghetto, i will be building new strut tubes when i get some good shocks as well but theese will work for the time being, also they dont go low enough so i need some shorter springs, and last of all i cleaned my shed so i can now walk all the way arpund my car without haven to step over anything haha

people who know me know i dont tend to clean up until things get really bad or i get really bored haha

anyways here are a few more pix, there will be another update tomorrow, interior paint will be done, cheers

cambertops
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120449.jpg

ride height, (at lowest setting) :wtf:
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120450.jpg

my car in my dirty ass shed
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120451.jpg

my car out of my shed that is clean
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/120452.jpg

keep an eye on this thread tomorrow night for updates as i should have interior done :rolleyes:

hilton
18th September 2007, 11:17 PM
thats sick man, need enw springs so u can slam it :D

dr1ft-pig
18th September 2007, 11:21 PM
yeah i hope ill be able to get it as low as i want it

anyone know what the lowest free height is with off the shelf 8kg springs??

Clinton
19th September 2007, 07:45 AM
pretty sure i could beat you in my car brendan.why the hell arnt we seeing this on 23rd :(

dr1ft-pig
19th September 2007, 12:12 PM
haha u could atm, u will see it soon enough, im gonna organise another cruise after this one is done and over maybe around new year or christmas time or something and im pretty sure it will be done by then, well it better be anyway


REGO TODAY.ZING

rick q
19th September 2007, 08:24 PM
SICK MAN, i really can't wait to see this thing in person and on the track where it should be

dr1ft-pig
19th September 2007, 11:21 PM
cheers man, lol ur tellen me it needs to be on track haha shoulda been 3 months ago :lol:

dr1ft-pig
20th September 2007, 01:13 AM
THE BEAST HAS REGO HAHA

DRFTPG
20th September 2007, 07:25 PM
yeh boi, seems to be getting somewhere now, not long to go

dr1ft-pig
20th September 2007, 07:26 PM
yeah not too far, got a job interview at supercheap next week so cash flow will be back, yeew

dr1ft-pig
22nd September 2007, 11:28 PM
bit of an update, i pulled motor n box out yesterday to seal the sump and all water housings, in the process i snapped my tps switch :angry:. got the motor and box back in last night and all is looking good going to buy a headgasket very soon and get the motor ready to fill with oil n shit, so if i get this job hopefully this thing should be on the street in around a months time :D

Dan_AE86
22nd September 2007, 11:55 PM
month!fuck yeah man that'll be mayd.
this thing'll be a mad lil weapon!

c u 2moz bruz.

dr1ft-pig
22nd September 2007, 11:59 PM
no worries man, u better not sleep ur ass in in the morning, nathan is bringing his r31 2 door aswell gonna be siiik

ae71
23rd September 2007, 01:08 PM
r31's are so sick

na, the 2 door versions would have to be uch superior to the 4 doors

dr1ft-pig
23rd September 2007, 08:48 PM
yeah 4 sure, had a wicked day on the cruise today, fucking awesome fun apart from the coppers...cooonts

DRFTPG
23rd September 2007, 09:18 PM
this better be ready for the next cruise or i will personally put a boot up your arse :P

dr1ft-pig
23rd September 2007, 09:22 PM
it will be ready for next cruise coz i gonna organise it ;) haha and id love to see u boot me in the ass haha

DRFTPG
23rd September 2007, 09:22 PM
haha yeh i would do it and then run...realllyyy fast :P

dr1ft-pig
23rd September 2007, 09:24 PM
u would wanna be able to run long distances.... smoking kills :P

Benny
24th September 2007, 12:24 AM
Great build mate, just read it then lol. I'm lookin at going a 20v. Where did you get the block from?

dr1ft-pig
24th September 2007, 02:32 PM
thanks mate, i actually got the whole motor and loom with my car when i bought it, i coulnt afford a 20v ae86 they were going for about 12-15k when i bought this

dr1ft-pig
24th September 2007, 07:47 PM
hey all, small update, got theese coilpacks today, $100 bux at local wrecker, need to get some custom leads made, anybody know af anywhere that i could get the from????

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/155412.jpg

Benny
24th September 2007, 08:33 PM
Can't make them yourself?

deleta
24th September 2007, 08:37 PM
just use the hyandi ones

i am

dr1ft-pig
24th September 2007, 09:01 PM
i want longer ones so i can mount them where they are pictured, but if its too much hassle then ill just buy daewoo ones

DRFTPG
24th September 2007, 09:22 PM
dude just get it done, who cares where they are mounted :P what else needs doing?

Gilly
24th September 2007, 09:24 PM
its fairly common practice to "shorten the strut" when converting to coilovers

basically you cut the threaded section off, cut a section off the tube then re weld the threaded section of tube back on. the external threaded sleeve ( the one off your banzaii coilovers) then is welded to the strut covering the joined section thus retaining strength.

you then merely user a shorter shock

ST185, AE92 shocks are a couple i can remeber

mine use ST185 KYB excel G's

retaining the standard length strut is why your car is a little high, shorter springs will cure this much the same as shorter springs would on a convential strut. stroke is somewhat reduced though and you can come close to bottoming out the shock which is why people build coilovers in the first place :lol:

good to see steady progress on this rig

stop breaking things :P:

dr1ft-pig
24th September 2007, 09:28 PM
haha cheers gilly, and yeah i really do gotta stop breaking shit, im going to build a better set of struts most probably go back to ae86 struts with the fc brake upgrade as i want power steering arms, and ill do a way better job on theese and shorten them and us a koni adjustable shock will get something to suit the st185....is that a corona or something?? celeica???

dr1ft-pig
24th September 2007, 09:30 PM
dude just get it done, who cares where they are mounted :P what else needs doing?[/b]


alot needs doing mang, there will be more frequent updates in the coming weeks as its only small shit that needs doing now all the big shit is done (barr exhaust) so yeah keep an eye out guys and keep the comments coming

Gilly
24th September 2007, 09:36 PM
Celica is ST185

I'll have a pair of 86 struts availlable soon , you know from where :lol:

timmay
24th September 2007, 09:39 PM
ur such a gaylord :lol: just gammin ya im comin round to urs now .. be there in 20... it dosent matter if ya use daewoo or hyundai or kia leads.. pretty much the same they all come from the same factory lol (they really do . work for nissan kia and used to work daewoo).. :2thumbs:

dr1ft-pig
24th September 2007, 09:46 PM
alright cuzzo, cya soon seeing as though u work for the dark side u can price me some up, i aint talking to that fuckwit spare parts guy (dylan) ill kick his teeth in

350hp4agte
24th September 2007, 09:55 PM
hey man awhile ago i was speaking to the guy who own's that AE82 BACKYARDER i dont no if you have seen it 20valve 4agte 10sec car looks like shit anyway he told me that he got his leads made at a place called magnacoil i lost there number but i'll see if i can track it down for ya

dr1ft-pig
24th September 2007, 09:57 PM
sweet as man thatd be good, if they too expensive but ill just get normal ones, but meh

DRFTPG
24th September 2007, 10:03 PM
yewww 10 pages brendon

dr1ft-pig
24th September 2007, 10:10 PM
yea boi...postwhore get back on your forum corner "hoe"

350hp4agte
24th September 2007, 10:38 PM
so its magnecor not magnacoil my bad http://www.magnecor.com/magnecor1/main.htm

dr1ft-pig
24th September 2007, 11:11 PM
ceers for that mang

Benny
25th September 2007, 12:25 AM
LOL man... I just realised who you were... It's benny! SUP??

dr1ft-pig
25th September 2007, 12:35 AM
benny??? where u from??? got no idea haha sorry

Benny
25th September 2007, 01:37 AM
benny??? where u from??? got no idea haha sorry[/b]
gt_apex yeah?

dr1ft-pig
25th September 2007, 10:01 AM
wtf???? :lol:

Benny
25th September 2007, 12:30 PM
I'm lost :( Who took those photos?

dr1ft-pig
25th September 2007, 02:20 PM
i took all of them lol cept for like the first 3 maybe how u know me????

dr1ft-pig
25th September 2007, 02:20 PM
i took all of them lol cept for like the first 3 maybe how u know me????

DRFTPG
25th September 2007, 02:42 PM
brendon know anyone who wants to sell me a ke70?


brendon know anyone who wants to sell me a ke70?


sorry got caught in the echo

dr1ft-pig
25th September 2007, 03:07 PM
fuckin post whore hahah

u will find one mang gimme 5g and ill find one and build it :P 4age spec

dr1ft-pig
25th September 2007, 03:08 PM
another small update, got coilpacks mounted in desired spot, whilst drinking a very nice cold beverage, heres a pic

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/155486.jpg

DRFTPG
25th September 2007, 03:13 PM
haha brendon are you ever not drinking

dr1ft-pig
25th September 2007, 03:17 PM
i wasnt drinking this morning??? :P haha im aquiring some free leads courtesy of timmay, he is gonna flog me some off a new kia or something, free leads ftw haha

this car is like the free car haha centrelink pays for it and some stolen shit gets put on it haha

DRFTPG
25th September 2007, 03:40 PM
i wasnt drinking this morning??? :P haha im aquiring some free leads courtesy of timmay, he is gonna flog me some off a new kia or something, free leads ftw haha

this car is like the free car haha centrelink pays for it and some stolen shit gets put on it haha[/b]

eveything is free and you still cant "afford" all the lil stuff :P

hey i got an idea, stop drinking and smoking for a few days and you should have the money to finish it hahahha

dr1ft-pig
25th September 2007, 04:00 PM
nah that aint gonna work ahahaha

dr1ft-pig
25th September 2007, 04:01 PM
nah that aint gonna work ahahaha

DRFTPG
25th September 2007, 04:37 PM
haha stupid kent

dr1ft-pig
25th September 2007, 04:49 PM
i gotta suport my habbits ahaha it will be finished soon lol

DRFTPG
25th September 2007, 04:52 PM
hahahha, but cars are way more important

dr1ft-pig
25th September 2007, 05:05 PM
if i dont have beer n smokes the work just simply dont get done, thats just the way the cookie crumbles or in my case thats just how the beer gets drunken

DRFTPG
25th September 2007, 08:08 PM
ahahahhaha, you have a come back for everything dont you :P

dr1ft-pig
25th September 2007, 08:14 PM
yes cunt hahaha got another lil update, been tinkerin round all arvo n shit and ran out of shit to do so i threw in my rear strut brace

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/155501.jpg

dr1ft-pig
25th September 2007, 08:16 PM
2 post

DRFTPG
25th September 2007, 08:29 PM
whats that ...another update, you have gotten more done in the last few days than you have in like a few months lol

RObErT_RaTh
25th September 2007, 08:50 PM
hey man looking good, hooray for free shit, cant wait till this is done and to see my accelerator cable put to good use, and whats with all the double posts

RObErT_RaTh
25th September 2007, 08:50 PM
hey man looking good, hooray for free shit, cant wait till this is done and to see my accelerator cable put to good use, and whats with all the double posts :P

DRFTPG
25th September 2007, 09:12 PM
ahahahah funniest shit i seen all night, i think it is coz ae86dc is fucking up

dr1ft-pig
25th September 2007, 11:45 PM
yeah it sure is grr , i just smashed my fone too i fuckin angry

Dom86
26th September 2007, 01:44 AM
d_pig nice car.

looks like alot of work going into it.
should be much fun when its done. :2thumbs:

where did you get the custom bellhouseing from? :pokes:

dr1ft-pig
26th September 2007, 01:47 AM
thanks man, yeah ALOT of work has gone into this, all being done by myself with some assistance with information and a little bit of labour from mates n shit and yeah i know its gonna be fun when its done, its being built to be thrashed and thats what its gonna get

i got the bellousing from a mate of mine who i also got the box from, i think its from "dellow automotive"

Dom86
27th September 2007, 01:43 PM
i was hoping you wouldn't say dellow, just wanting to get it cheaper. but thanks anyway.

i know what you mean about the beers, specially in summer :grinner:

dr1ft-pig
27th September 2007, 06:44 PM
they are expensive but u gotta do what u gotta do

DRFTPG
29th September 2007, 11:34 AM
haha got a drunken message fomr you last night, funny stuff, puttin the new head gasket in lukes pulsar today :2thumbs:, it blew the old one from running to much boost :P we are gonna have a look at the engine while its apart and see how close it is to needing a rebuild, if it needs one soon then its gonna get pulled apart and full forged internals are going in, looking for around 240kw atw

dr1ft-pig
29th September 2007, 11:38 AM
tru as haha yeah i got pretty tanked hey, this town is loaded with fuckin aboriginals atm big footy game on abo V abo same game that caused redfern riots, and now its in lismore, this town is a fuckin mess

Benny
29th September 2007, 11:41 AM
tru as haha yeah i got pretty tanked hey, this town is loaded with fuckin aboriginals atm big footy game on abo V abo same game that caused redfern riots, and now its in lismore, this town is a fuckin mess[/b]
LOOOOOOOOOOOOL.

DRFTPG
29th September 2007, 11:46 AM
tru as haha yeah i got pretty tanked hey, this town is loaded with fuckin aboriginals atm big footy game on abo V abo same game that caused redfern riots, and now its in lismore, this town is a fuckin mess[/b]

yeh its the kinda town you cant walk through without gettin a dirty look from some lil abo kid, i dont think they like us white kids :blink: couldnt imagine what it would be like with 2 footy teams of them haha there would be some serious meth consumtion happenin in lismore at the moment :lol:

dr1ft-pig
29th September 2007, 11:49 AM
dude 2 footy teams???? theres like 6-8 footy teams and about 9000+ supporters, im dead set serious u cannot go more than 10 metres without seeing at least 10 of the filthy fucks

DRFTPG
29th September 2007, 11:51 AM
AHAHAHHAHAH sounds good...**Note To Self** DONT GO TO LISMORE

dr1ft-pig
29th September 2007, 12:00 PM
yeah not good hey, anyway a bit more on the car, getting very close to driving state

all it needs is:
spark plugs
headgasket
extractors&exhaust
timing belt
wire up (mates doing it in a day or 3)
tailshaft needs to be put in (5 mins)
rear rotors and diff need to be installed
and a few odd bolts around that i didnt have in my bucket'O'bolts (only have 2 bellhousing bolts in atm
and finally, fluids and hoses etc

and a good fuckin thrashing

obey wan boenny
29th September 2007, 01:07 PM
awesome! I can't wait to see this beast in the future some time :D...out at QR!!! :P

dr1ft-pig
29th September 2007, 07:42 PM
dont worry, it will be at QR after it tuned and ive done a few k's in it to make sure its reliable n shit, keen as to get it going, the big ass list is getten shorter

burado
29th September 2007, 08:29 PM
hey all, small update, got theese coilpacks today, $100 bux at local wrecker, need to get some custom leads made, anybody know af anywhere that i could get the from????

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/155412.jpg[/b]
Hey mate i shoulda told you today, Repco can get those leads made up 4 u from Top Gun, they are re extending mine after i changed my mind.... again..

bring them down and i'll sort it out for you :2thumbs:

dr1ft-pig
30th September 2007, 10:44 AM
haha, na i got leads now, and i mounted my coils in a different spot ,ill just be able to use daewoo ones

Clinton
30th September 2007, 01:41 PM
can i roll with a couple of times to QR?

dr1ft-pig
30th September 2007, 07:12 PM
if you really feel the need, gotta take a few mates up first but

dr1ft-pig
2nd October 2007, 06:09 PM
hey guys, another small update, i finished painting the interior floor and installed a few interior panels back in the car and also the passenger seat, i even pushed her outta the shed for a wash and a few piccys for october car of the monthanyway heres a few pics

also have a new JDM sprinter drivers seat coming tomorrow which is why normal driver seat isnt installed

NOTE: dust fucking everywhere inside

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/155887.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/155888.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/155889.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/155890.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/155891.jpg

rthy
3rd October 2007, 06:39 PM
looks like your spending some time trying to make it all to a high standard, i respect that.

I sujest ditching the stock trumpets though.

also sorry if I missed something but if you are not going to run boost why not "upgrade" to a T50? your car would be faster when done

why the rear brace?

which disk brakes are you going for?

dr1ft-pig
3rd October 2007, 07:37 PM
looks like your spending some time trying to make it all to a high standard, i respect that.

I sujest ditching the stock trumpets though.

also sorry if I missed something but if you are not going to run boost why not "upgrade" to a T50? your car would be faster when done

why the rear brace?

which disk brakes are you going for?[/b]


yeah, stock trumpets will be ditched for T3 items when money allows as im strapped as for cash

na no boost, the reason for the w58 as it has an awesome 2nd gear ratio and is ALOT stronger than a t50, T50's are pure junk, if a half dead 16v can kill one in less than 3 months then a 20v will smash it easy as with the way i drive

rear brace was cheap so i bought it

stock jdm rear brakes

rthy
3rd October 2007, 07:55 PM
with the T3 trumpets did you check at what revs they are tuned to? I havent yet myself but I suspecting they may be way too high.

Also whats your plans for filtration?

with the T50, I have hever heard of anyone breaking one with a non boosted engine. If you must have a W box I sujest getting ratios that suit the 20v better, ie: a W55. On the bright side you will probably make a profit doing such a swap.

With the brace if you like the look of it then leave it, it is just ballast though.

With the leads you can do what I did: get some OEM 20v leads or hyundai ones (they dont fit as well because they are longer though) and then just shorten them to suit. I have changed my coilpacks location 5 times now!! hehehehe. I think I have the final place now though. Apparently its pretty easty to get something custom made though, which I might do for my 7AFE head upgrade.

Also with the rear brakes have you considered corona disks? unless I am mistaken JDM rear brakes are 200mm or so and have a brake pad smaller than the side of a matchbox. Corona has a 280mm diameter disk but it has its downsides also.

Not trying to be negative or anything, I like your approch to your build and I would like to see where you are going with it. I am just trying to give some constructive sujestions, feel free to question my advice at any time, I am learning also.

dr1ft-pig
3rd October 2007, 08:10 PM
with the T3 trumpets did you check at what revs they are tuned to? I havent yet myself but I suspecting they may be way too high.

Also whats your plans for filtration?

with the T50, I have hever heard of anyone breaking one with a non boosted engine. If you must have a W box I sujest getting ratios that suit the 20v better, ie: a W55. On the bright side you will probably make a profit doing such a swap.

With the brace if you like the look of it then leave it, it is just ballast though.

With the leads you can do what I did: get some OEM 20v leads or hyundai ones (they dont fit as well because they are longer though) and then just shorten them to suit. I have changed my coilpacks location 5 times now!! hehehehe. I think I have the final place now though. Apparently its pretty easty to get something custom made though, which I might do for my 7AFE head upgrade.

Also with the rear brakes have you considered corona disks? unless I am mistaken JDM rear brakes are 200mm or so and have a brake pad smaller than the side of a matchbox. Corona has a 280mm diameter disk but it has its downsides also.

Not trying to be negative or anything, I like your approch to your build and I would like to see where you are going with it. I am just trying to give some constructive sujestions, feel free to question my advice at any time, I am learning also.[/b]


to be honest i really didnt know there were tuned lenghts for intake trumpets, but hey u learn something new everyday

about the t50, i broke one lol so im not taking that chance again, most of the w series boxes have same ratios just the steel cased 58 which i have has a different 2nd gear ratio which is really long and was told by my mate who i brough it off that it was an improvement from the t50 (came from his improved production sprinter, was behind worked 16v) so going off what he has experienced with this box its going to be really good, but yeah i can kinda see where your coming from, going to a heavier box may drain a little power but not too worried, ive been thing about a beams 3sge instead of going 7age so that will come in around a years time after its back on the road (i have 2s* bellhousing to suit w58 t 3sge sitting here)

what do you mean by ballast??? sorry for my ignorance but in a yr9 dropout haha the brack should strengthen it up and make it a lil more rigid


i got some leads from a nissan terrano, they aren the best but it will work till cousin steals more from a car that "needs new leads"

na havent considered corona stuff, being a kouki diff the brackets wont line up so im going with the stock kouki brakes for now, once i get the car set up right i will be making a 2 way bracket and running 2 calipers on each side, 1 for normal braking and stock handbrake and the other will have a sticky set of pads and be run off a hydraulic handbrake of some kind

i dont think your being negative at all, i love it when people throw suggestions and hints/tips etc, its a good learning base as when someone tell me about something new, i read up on it, ive read your tech page heaps of times, since i have been on this forum, i have learnt a fair bit, and now doing this conversion on my own has made me learn so much which is why i always answer to tech Q's when i can..

dr1ft-pig
3rd October 2007, 08:22 PM
here is example of brake setup (beau yates car)

http://i49.photobucket.com/albums/f254/davisjd/DSC00673Medium.jpg

dr1ft-pig
4th October 2007, 11:00 AM
hey guys, a little bit of an update, got a new seat this morning, dark blue/grey JDM seat fuckin comphy got it from dane (thenewkid84) ex madhouse seat yo ahah heres some pics

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/155985.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/155986.jpg

riceburner
4th October 2007, 11:01 AM
Ill be the first to say wtf twin calipers. Havent seen that before on a hachi

dr1ft-pig
4th October 2007, 11:08 AM
thats on beau yates hachi, 1 is purely for hydraulic handbrake as disk brakes arent the best for handbraking with a cable

looks pretty trick i think, will be very effective

samoo
4th October 2007, 11:09 AM
that seat is pimpin :P

dr1ft-pig
4th October 2007, 11:11 AM
that seat is pimpin :P[/b]


cheers, its soooo comphy, hugs u almost as good as a fixed back, this will be up for sale when i get cash to buy a fixed back and proper rail though

obey wan boenny
4th October 2007, 01:50 PM
I'll take the seat off your hands when you're ready :P

DRFTPG
4th October 2007, 02:23 PM
new seat looks nice and supportive!!!

Benny
4th October 2007, 02:38 PM
That twin caliper setup is insane.. Personally never seen it before. Anyone know where there is a full writeup on it?

86xxx
4th October 2007, 03:01 PM
That twin caliper setup is insane.. Personally never seen it before. Anyone know where there is a full writeup on it?[/b]

Pretty simple really, one caliper is set up with normal brakes and cable handbrake, the other is a hydraulic handbrake, so a hydraulic system (independant to the brake system) with the cable handbrake just forgotten about (not used.).

Bustin_86
4th October 2007, 03:11 PM
When SamQ said ballast he was cheekily reffering to your strut brace as being nothing more than extra weight :P

JGTC cars have to meet a certain weight, so they often go below that weight, so that they can move the extra weight (ballast) around the car to optimise handling. Ie, weight distribution.

dr1ft-pig
5th October 2007, 02:47 AM
I'll take the seat off your hands when you're ready :P[/b]
yeah well it will be up for sale when im finished with it so yeah whoever got the cash can take it haha, or i could start hoarding haha


new seat looks nice and supportive!!![/b]
very supportive, although i havent driven with it yet i have sat in it and tried to move around and compared to my passenger seat it has 100x less movement


When SamQ said ballast he was cheekily reffering to your strut brace as being nothing more than extra weight :P[/b]


i see, i dont see why its just dead weight, i see it as a brace thats designed to do its job and rigid up th body a bit, seems to do its job just by grabbing onto it, its solid as

rthy
5th October 2007, 01:20 PM
intake uning: yes the length from the intake valve to the opening in the airbox/plenum has a significant effect on the power level and delivery, over 30% difference in power from what I have seen in dyno charts. I can show you the formular to work it out if you like. From memory the primary harmonic resonance in the intake happens at 6500 in a stock 20v after vvt is turned off. Shortening those trumpets will raise that, the T3 ones may lift your primary resonace to 8000rpm which is not a practical setting for your engine setup. In true American style they don't tell you that. When I was going for my blacktop/silvertop hybrid engine I was going to tune it to have a primary resonance with vvt at the same resv as what the car cruised on on the freeway. I think this corresponded to a 6200 rpm resonance with VVT off. But seeing I am ditching the 20v at this stage I will sadly lose any form of variable cam timing and therefore just have a single tuned point in my intake. So I will probably tune my intake for a primary intake resonance at 6500 and a primary resonance in the exhaust at maybe 7000.

rear brace: Bustin was ahead of me on an answer on this one, that brace is just dead weight unless you like a shiny ornament in the back of your car. Ok I really didn't want to go out of my way to show how something is completely no good because I don't want to be putting any down. However because it genuinely sounds like you want to know I will explain.

There are actually quite a few reasons why it just cant work:

- In a normal sprinter there are very little side loads in the rear shocker towers and very little bending movement in that part anyway.

- The movement there is is higher up and the section your brace is bolted to is just above a floor-panel for which there is a very thick subframe brace underneath.

Even if that section would move it doesn't really matter here's why:

- the two things on each side using that as a support is the spring and the shocker top. Neither one of these positively locate the suspension geometry. This is the job of the 5 links (or 4 for me), in regard to locating the tops of the springs and shocks the can move as much as they like providing that that isn't a significant change to their relative length which cant happen on any car that I can see.

- the movement in most ends of cars is only in mm unless something is wrong. That brace is bolted to sheet metal, I think it would easly be able to flex a few mm with the give in the metal before it would provide any meaningful opposing force.

- even if it was on a proper anchor point that brace by the looks of it is just a piece of aluminium pipe, again I think it would have much more give in it than what you might think. I will say though I am bias n this area and I think most of the braces coming out of Japan are cheap crap.

All that said your brace if it was a different design would do something if you had a Macpherson strut rear suspension which no sprinter does. Ontop of that there is a rear brace for a sprinter that does actually work. It bolts between the rear seat latch mounts, they can double up as a good harness mount too.

One last thing on the topic it may be my personal opinion but I think aluminium is a poor brace material and is used out of economic reasons, for me its cro-mo or nothing.


ignition lads: Nissan Terrano? How compatable are they to a 20v? this is a new one to me. As for your cousin hehehe what a sneak.




also I just said what i said before about being negative because I dont want to come across as someone who knows everything, thinks that everyone else is worse off or knows nothing worth knowing, because none is of this true.

As for my tech page, is that my cooling guide? I really dont get much feedback on that one so I dont know if people use it or not.

dr1ft-pig
5th October 2007, 06:10 PM
so the tuned length just kind of determines where the paek power will be in a way, if so id like that around 8500 and as for the brace, im not really too worried, i will be getting a rear brace made to go between rear seat latch mounts and have a harness mount on it

and yeah rear your cooling guide, its pretty good though i didnt really understand y u made a custom water pump etc, the external thermostat is a much easier idea although it may look a little bit rough, its effective and it works

rthy
5th October 2007, 08:49 PM
not directly where the peak power is but it can have that effect. The easiest way to imagine it is it shifts the whole power curve around.

With my cooling guide yeah I ground the blades of the pump a bit but I know that the external thermostat is the easier option. I was meant to rewrite the article to allow for that also but I never got around to it.

dr1ft-pig
6th October 2007, 02:06 AM
i see, thats fair enough, i wont be running a thermostat at all for a while as im fukt for cash so just a thermo switc for now hooked to a thermo fan, im drunk so excuse the english