Joels Te72

[JoellaRolla]

I bought a ae71 for $300 that was seized and auto but great panels and body.
Then I went and bought a manual t18.
I will be doing the coversion soon.
I got the 4ac and auto out of the ae71. Ready to start pulling the 3tc out.
I will get some pics and post them later.

[slydar]

what coss member will you run.. and more tho the point.. what steering system.. t18s are steering box.. 7s are rack and pinnion.. if youve got the skills/connections.. you should try to run the rack.

[JoellaRolla]

I will use both cut and weld. Im a first timer so i dont know much but im learning

[japlish]

that's where i come along http://www.ae86drivingclub.com.au/forums/emoticons/greenbounce.gif

[JoellaRolla]

thanks mate Ill keep that in mind. Anything else he had trouble with in the conversion?

[Bustin_86]

love 3t's, top form dude

[green_boy_91]

can some 1 tell me what 3T's are?

[japlish]

1.8ltr single cam carby 4cyl out of t-18's.
they make similar horsepower to a 4ac but with more tourqe.

[JoellaRolla]

The 3tc is an engine out of a t18. its a 1.8L and is comes stock as a carby.

[JoellaRolla]

what exhurst system should i use, there is a set of exstractors at the wreakers on a t18. Should I use 2inch single right through and what tip should I use?

[butterz]

what exhurst system should i use, there is a set of exstractors at the wreakers on a t18. Should I use 2inch single right through and what tip should I use?[/b]

Hay dude sounds lyk u need to do a bit more looking search the net google there r heaps of mad ae71's and ke70's in america, im doing a similar convo but a 3t gte just keep the rack cut the mounts off the t18 crossmember bolt your box up to the engine put it all in at once bolt the box in and position the engine so it dosent interfere wit the rack tack make sure the rack is clear turn lock to lock pull engine out and weld mounts in fully!!!!

hope this helps!!

[RobertoX]

1.8ltr single cam carby 4cyl out of t-18's.
they make similar horsepower to a 4ac but with more tourqe.[/b]


they dont rev anywhere near good and they are pushrod and really heavy

4ac FTW

[tin can]

Joellarolla


Mate I have to say go with the 3tc. it's a good motor do u have any plans to go turbo in the future.


Mate I went turbo in my ke70 with the 3t donk and I can tell you it's a nice driving car mate there's alot torque

All I done to mine was put a came in it to make in rev more which cost me $80

And dual race valve springs from performance valve springs in qld

And I went injection on my 3t

The car now rev's to 7'200 rpm and on 10 pound's the car makes 114kw @ the wheels


So what people say about the a boat anchor and the don't rev make the 3t rev is only a cam away.

What I say they are a pretty good boat anchor

And trying to find a 3tc is easy I picked up 4 3t's for $200 that's 50 bucks a motor


There is a lot you can do with the 3t but how much do you want to spend


Well that's my 2c


Thanks jess

[JoellaRolla]

No Im not going to turbo because I wont be able to drive it after July because in Qld we can not drive turbos or supercharged or V8s after then. I only have a low bugget under $1000 but its always is good to know for later. I was also thinking of going fuel injection has anyone done this and if so could you post pics of new bolt holes in manifold.

[JoellaRolla]

Should I fuel inject it or should I change the carby?

[Course_Out]

Stick with carby mate, I'm pretty sure you'd have to make an injection manifold for the 3t from scratch as I'm reasonably sure only twin cams came efi (feel free to correct me if I'm wrong people)

[JoellaRolla]

thanks for all the advice you've all given it all helps

[tin can]

hi guys/garls


ok bought the cam from wade cams in vic


3t single cam did come out injected.
i got mine from south africa and ddone a cut and shut



thanks ]

[tin can]

http://www.wadecams.com/

ph:03-9568-0333

e-mail :admin@wadecams.com

[JoellaRolla]

Got Pics!!

[green_boy_91]

hey i was going to turbo my 4k in my ke70 but since this thread iv been thinkin about the 3t so should i turbo a 3t instead or the 4k?
and also were do u buy t18's i have never seen them besides on this site?

[Hokey]

Yeh wondering same as JHS
please be melbourne http://www.ae86drivingclub.com.au/forums/emoticons/greenbounce.gif
-Calvin http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif

[japlish]

sorry fella's but he's in qld, and there's not guna be much of a car
left when he's finished with it either http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif

[JoellaRolla]

I want :
engine
gearbox
crome bumpers
tyres (will replace)
diff
drive sharft
wireing
4 seat bolts
and maybe a few other things when I think of them

[JoellaRolla]

hey i was going to turbo my 4k in my ke70 but since this thread iv been thinkin about the 3t so should i turbo a 3t instead or the 4k?
and also were do u buy t18's i have never seen them besides on this site?[/b]
You can get t18s alot of places wreakers, I got mine off rollaclub. All toyota forums will eventually have some

[green_boy_91]

oh kool thanx man http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[JoellaRolla]

I was wondering, how much do the t18 and ae71 wiegh?

[JoellaRolla]

do u want a rolling shell eventually? Mines in good cond.

[JoellaRolla]

cheak out the rims!!

[Brenton 86]

Nice job at lowering it, lol.

[JoellaRolla]

Got some mates to jump on the back lol

[JoshKE]

Nice looking rims, now you just need to make the 71 that low, minus the friends standing on the back of it http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[JoellaRolla]

Its all good im now thinking about not doing the convertion yet. I might do it soon. My t18 is in to good of condition. I will do the convertion but not quite so soon. My ae71 is in great condis so Its a much better car for mukin around.

[JoellaRolla]

Good idea and leave the ae71 off the road and t18 just with cheap mods cam, exstractors, carby and have some street fun snd if i right off the t18 I can just put the 3tc in the ae71.

[Stuck]

Paint those rims matte black and keep the chrome dish! Stat!

[ToyT-18]

dam right they slide real good!!! oh and if you want to know you can put a t-18 crossmember in a ke70 so you dont have to use/make different engine mounts and if your really skillfull you caun cut the stearing mount off the crossmember and weld it to the t-18 xmember, have seen it done! on an old site

oh and man that is a mint t-18 that nearly a waist man if your just going to gut it! its in very good condition! but if you wanna save the car and put something like a 3tgte in it!

and just be carful cause you could have ended up with a 13t in it instead of a 3t like i did!

and onother thing you can use 2tgue efi you just have to make an adaptor plate because the post holes are the same but the bold hols are different i have a pic here.... ok well i cant find it so i will show you latter, and yes someone stated earlyer that they produced an efi 3t its just a 3te
[attachment=9885:attachment]

when you get old enough to have a powered vehicle go turbo they are good fun turboed go off there head!

well if someone has answered anything that i have already said oh well i was just going over it again

Cheers Sean

[JoellaRolla]

Yeah mate I have dicided to keep the t18 and put new cam, carby and exstractors in it and register. I will eventually finish off the ae71, in the mean time I will be doing a paint job on it then get a 16v in it with supercharger and use that as a track car.

[JoellaRolla]

What should i do first to my t18 ?
lsd
or cam, carby, exstractors

[Bustin_86]

Lock the diff.

Get some stiff suspension. I just put some stuff in my te72, made all the difference. Slides a LOT easier in the dry and havent had a go in the wet yet. Talk to ajps about suspension, he knows his shit and will look after you.

[JoellaRolla]

ok is it true that you can use ford falcon rear springs with susuki searer shocks in rear?

[JoellaRolla]

Do you have contact details for AJPS?

[ToyT-18]

i say go the cam carb, and extractors then the suspention but hey thats my opinion

Cheers Sean

[Bustin_86]

power is the gay with cutties or some shit...

[Bustin_86]

yes i have falcon shiz in the back of my car. Stock shocks though. Gonna talk to suck-for-a-buck (lawson) about some ghetto upgrade though... Makes driving, and drifting, so so so much better. Also really cut down on bump steer opposed to cutties!

Dont be silly, get suspension first!

[JoellaRolla]

My steps
Road worthy
Register
Suspension
carby
cam sharft
locker

[ToyT-18]

man you dont need a locker till last a t-18 can do wicked enough skids and drifts without one, same goes for suspension my car can drift second in the dry with an open wheeler a fucked motor and 4x4 suspension just ask brendo. its better to have are car going wicked befor it looks tough or its pointles to have the car looking tough without any guts! just so you can piss all those other dickheads off that think there car will go faster that a little toyota but then you bas him in a standard looking thing then they all think twice about that shit!

[JoellaRolla]

Is there such a thing as a t 18 repair manual

[JoellaRolla]

yeah carnt skimp on safety Brakes are a priority

[JoellaRolla]

What brand is the repair manual?

[ToyT-18]

since when is a locker safty when they are illegal??????????? lowered srings arn't alyays safe and i know that from experience in heaps of cars of course you want bigger brakes and rear discs are the way to go

[JoellaRolla]

a locker is heaps safer then a open when trying to slide!!!!!!

[Course_Out]

Open diff drift can be a bit scary, but you end up with reflex's like a jungle cat on heat

[JoshKE]

Open diff drift can be a bit scary, but you end up with reflex's like a jungle cat on heat[/b]

HAHAHAHAHAHAHAHA

oh, god... thats gold http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif

He's right though http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[JoellaRolla]

My brake master cylinder is leaking so i might need a new one. Also in my lefthand rear brake there is a leak from the diff i think i will just have to replace the seal.

[JoellaRolla]

do you no how much they are?

[Javal]

No, but you can ask him:

www.ajps.com.au

[JoellaRolla]

One thing Ive been thinking about is the t18 unleaded or leaded?

[Stuck]

Should be unleaded.

[ToyT-18]

they are a leaded car but obvicly now you run unleaded but put flash lube in it if you can be arsed everytime you fill up.

[meadan]

i ran mine on unleaded, it didnt seem to mind.

[RobertoX]

master cyl = $179
wheel cyl = $20 ea

they are leaded series 1's were i believe

but meh

dont use flash lube

stick 98 in it, advance the timing winner

[Javal]

All japanese motors post 1979 came out with Hardened valve seats, and are perfectly safe to use unleaded in, but they like the high octane rating so yes, use 98 octane and advance the timing.

[ToyT-18]

well i do beleive they are leaded as they do not have a cat. converter, like all unleaded cars are meant to have!

[JoellaRolla]

Can anyone tell me the title of the t 18 repair manual?
cheers

[ae71]

well i do beleive they are leaded as they do not have a cat. converter, like all unleaded cars are meant to have![/b]

i didnt think they had leaded in japan..? and the 3tc's wher used in japan...

[JoellaRolla]

thanks mate.

[JoellaRolla]

Found it!!

[JoellaRolla]

Bort brake stuff
master cill
slaves
rear pads
Just put the slaves and pads on today.

[JoellaRolla]

Got my master cyl in!

What can i do for front suspension without changing brakes and stuff? Just new shocks and springs.

[Javal]

Correct, but you may be able to negotiate some custom coilovers with AJPS.

[Course_Out]

T18 takes same shock and spring as ae86 mate, so just order the bits off Dave, easy!

[Bustin_86]

Series one t18 front springs are different to sprinters, i had to buy some custommmzzz ones off of Dave for my car. Luckily i got them cheap. Probably a good idea to convert to sprinter struts if you want easy spring purchase and bigger brakes etc...

Cheers,

Justin

[JoellaRolla]

I happy with the stock brakes on the t18. I was just wondering if i could use any other car springs on the front thats all.

[Bustin_86]

Then your not going fast enough!

Not that i know of... Talk to Dave though. I'm sure he could make you up some springs as thats where i got mine from. Probably have to pay a slight premium considering that it would be a one off or low production run though...

Ring him for best results http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[JoellaRolla]

Will do, Another thing is do i need to buy new shocks if i use ford springs in rear how far can the stock shocks go?

[ToyT-18]

well there is a post here somewere correct me if im wrong but s13 silvia coilovers using corolla camber tops and lower control arms fit giving you -3 degrees camber just like sigma arms.

[JoellaRolla]

I took out my bump stops for steering they added a heap more angle about 5% - 10%, i got a fair bit of lock now!! almost as much as a s13 lol

[JoellaRolla]

I got a little bored tonight so i thought I would photoshop my car. lol
[attachment=11610:attachment]
From this to this!!
[attachment=11611:attachment]
LOL again

[Bustin_86]

Lol, not to keen on the style personally. Reckon you could probably improve on your chopping skillz as well http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif Try C and P rather than customz brushing... Always comes out with a better result.

[JoellaRolla]

I bought at a big swap meet today a 32/36 dgav weber carburetor cost $40, and two 1990 ford falcon springs for $5. I was wondering how low i can cut them with the stock shockes?

Also my car is booked in for a road worthy on monday.

[JoellaRolla]

I sold my ae71 today so i can pay for rego. I dont have the funds to have two cars and a motocrosser. So ill use my te72 as a daily and a bit of fun. lol

[JoellaRolla]

Another dodgey pic

[JoellaRolla]

My car is finally regested orsome. Have to find a adapter plate for me carbie, might have my springs in this week end.
http://img53.imageshack.us/img53/9759/img2576lw3.jpg
http://img219.imageshack.us/img219/9972/img2581sj1.jpg
http://img154.imageshack.us/img154/1817/img2580lc6.jpg

[JoellaRolla]

One Question when I change my camsharft do i hve to change my bearings and pushrods?

[JoellaRolla]

Just puttin a pic of my rims up.

[JoellaRolla]

Got my carby on thanks to Just Half Stepin for parts and Japlish for helping me put it on. Its running ruff though few more tweeks or smaller injecter.

[us_ae86]

Update:
His motor is nearly finnished.. Here it is....
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/132929.jpg

[stouty]

Lol http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif

[JoellaRolla]

DAM I wish. lol
Good call !!

[JoellaRolla]

Can anyone help me with my carby conversion. Ive got it on but im not sure what vacum hoses have to be conected again?
Will add more pictures later.

[JoellaRolla]

Got some exstractors today and put them on.
[attachment=12953:attachment]

[JoellaRolla]

I need to work out some type of air box though.

[Bustin_86]

lookin good

[JoellaRolla]

What cars came out with a 32/36 downdraught weber Carby? http://www.ae86drivingclub.com.au/dcimages/7/5/4/536981.jpg
Because Im looking for a air box.
Cheers

[Javal]

2L escort and some old alfa, dunno which one.

[Javal]

SNAP

[JoellaRolla]

Im just sick of not being able to drive it round. I can by a top manifold for it from redline, to pipe to pod filter.

[JoellaRolla]

Costly though. They quoted $105 + post witch is $32 for a snokel to fit. I might just by the proper thing. I didnt wont one of those ones that sit on top of the carby sucking in hell amounts of hot air. But i might have to.

[JoellaRolla]

Found some info on this on a diffrent forum.
http://www.toymods.net/forums/showthread.php?p=220872

[JoellaRolla]

I could use one of these.
[attachment=13151:attachment]
Found it here.
http://69.0.202.131/SEMA2002/html/Super_Flow_filters.htm

[japlish]

just make one yourself ya lazy gunj head! http://www.ae86drivingclub.com.au/forums/emoticons/greenbounce.gif

[JoellaRolla]

just make one yourself ya lazy gunj head! http://www.ae86drivingclub.com.au/forums/emoticons/greenbounce.gif[/b]
Shutup fool!
We all know you like to cut corners!
Much better to have the proper thing.

[JoellaRolla]

Put new set of spark plugs in tonight and resealed my exstractors with gasket sealant.

[JoellaRolla]

Orderd a air filter today from these people.
http://www.redlineauto.com.au/opening_page1.htm
This is close to the one i orderd
[attachment=13264:attachment]

[JoellaRolla]

Picked up my air filter today. Also pulled off my air pump. I was told i dont need it is this true?

[JoellaRolla]

Air filter is on. Driving round now!! witch is awsome. Flashin me Massive L plate magnets. lol

[JoellaRolla]

Im gona eventually get some kings in the front. Should i go super lows or just lows?

[stouty]

Hey mate where did you get the extractors from and where did you source the new carby from?? Lookin good man keep it up.

[japlish]

extractors: wreckers
carby: swap meet
http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif

[JoellaRolla]

extractors: wreckers
carby: swap meet
http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif[/b]
Yeah swap meets are orsome! http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif
Except when you have to push 4 17 inch rims 2 k to car park. lol http://www.ae86drivingclub.com.au/forums/emoticons/rant.gif

[JoellaRolla]

Had to put a new gasket underneath the adapter plate.
[attachment=13662:attachment]
[attachment=13663:attachment]
[attachment=13664:attachment]
Seals really well now!

[Bustin_86]

Looks nice as man, paint your rocker cover!
Hope mine looks this good one day lol http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[JoellaRolla]

Looks nice as man, paint your rocker cover!
Hope mine looks this good one day lol http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif[/b]
Got the heat paint there just gota do it. lol http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif

[JoellaRolla]

Looks nice as man, paint your rocker cover!
Hope mine looks this good one day lol http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif[/b]
Is this better Bustin?
[attachment=13958:attachment]
[attachment=13959:attachment]
[attachment=13960:attachment]
Also got a new gasket for it.

[Bustin_86]

not to sure about the 3tc lol http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

Is it black or brown?

Lookin good

[JoellaRolla]

Black, i used that heat paint stuff to 650'c!

[Bustin_86]

nice bro

[JoellaRolla]

With the ford springs how do they sit in rear... Do you put the cut bit to bottom postion and hope for the best?

[Bustin_86]

Yep. Dont forget to cut your bumpstops. Serrated knife is the best.

[JoellaRolla]

I was thinkin about just goin kings all round.
customs
30-40mm
front 6kg
rear 4kg
Did you know that super lows are only 25mm shorter then OEM

[Bustin_86]

AJPS does custom springs for 190 a pair.

Help a small business out, fuck kings.

[JoellaRolla]

I can get kings for $98 a pair through repco cost price.

[Bustin_86]

Fair enough... go through them then.

I have 6.5 and 5 in my car (te72) its brilliant. Does it just nice for the hills, but can slide reasonable as well. Biggest thing is getting decent shocks to match your springs.

I rep kyb excel g short stroke shocks, which are uncannily enough available through AJPS.

[JoellaRolla]

lol. im goin
6kg in front
4 kg in back

[Bustin_86]

Good street setup

[Blood Child]

nice to see this one in the flesh.

[JoellaRolla]

I found one use for junkmail. lol. I also deliver it to pay for this thing.
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/138014.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/138015.jpg

[meadan]

nice work. it makes me miss my old t18
does it drive much better with the weber and extractors on?
also, im sure that part that u masked up clips off somehow. Mine came out quite easily because one of the clips was broken.
Either way more pics http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[JoellaRolla]

Yeah goes alot betta but when i finish the 2 inch off it will not be so consterpated. Even can have a hell of fun even on learners. Will get more pics when rims are on and kings in.

[JoellaRolla]

dam, i might aswell weld a piece of rhs in there instead.
The springs will be 2 weeks before there here.
I gotta get a new clutch. its dead now lol.
Can still have fun on Learners. http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif
What type of clutch should i get cuz only got low power?
Ps cant snap third on street...

[Bustin_86]

Not much point snapping third with a 3tc http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[Trev084]

You missing the AE71 yet http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

Project is looking good mate.

[Bustin_86]

'sif you would miss an ae when you have TE POWAH!

[Trev084]

'sif you would miss an ae when you have TE POWAH![/b]

Im the owner of the AE71 he had:

http://www.rollaclub.com/board/index.php?showtopic=12422

Its getting there slowly.

[JoellaRolla]

<{POST_SNAPBACK}> (index.php?act=findpost&pid=336867)

'sif you would miss an ae when you have TE POWAH![/b]

Im the owner of the AE71 he had:

http://www.rollaclub.com/board/index.php?showtopic=12422

Its getting there slowly.
[/b]
Year your doin well with that. http://www.ae86drivingclub.com.au/forums/emoticons/greenbounce.gif Na not missin it. Cuz if this is the speed im doin up one car, imagine how slow it would be for me to do up two! http://www.ae86drivingclub.com.au/dcimages/7/5/4/536981.jpg
besides 3t s are much betta lol. You will shut me up when yours is done! http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif
I was eventually thinkin 3tzc mmm. lol

[JoellaRolla]

get an exedy organic heavy duty......

had it in 3 of my t18's.....the same clutch, just pulled it out and swapped it into the new shell...[/b]
How much like price range for one of these?

[japlish]

lol, like he's guna get that past his mum! lol......

[JoellaRolla]

lol, like he's guna get that past his mum! lol......[/b]
Like your mum tellin you that you couldnt put a 1jz in the chaser? lol http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[japlish]

at least i get a FREE jzx90!! http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif

[JoellaRolla]

Thats got a crappy diesel turbo, auto in it. http://www.ae86drivingclub.com.au/forums/emoticons/rolleyes.gif

[JoellaRolla]

My kings have arrived! Will try to have them all in on Wendnesday arve.

[japlish]

the marshmellow suspension will be sorely missed http://www.ae86drivingclub.com.au/forums/emoticons/greenbounce.gif

[JoellaRolla]

Ha Ha.. Today road my bike past some hand brake skid marks.... Hmmm wonder whos they were? lol http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
Will post up some pics of before and after, when springs are in....

[JoellaRolla]

Pics of springs!
[attachment=14555:attachment]
[attachment=14556:attachment]
http://www.ae86drivingclub.com.au/forums/emoticons/rolleyes.gif

[Bustin_86]

Omg there fucking hhuuggee http://www.ae86drivingclub.com.au/forums/emoticons/ohmy.gif

[Brendo]

the car will be higher than stock? haha they are like 4 story springs

shoulda bought 2 and cut em both in half http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[JoellaRolla]

Did the fronts the sarve. They only just sit in the strut without fallin out.
The car looks a little to low now. http://www.ae86drivingclub.com.au/forums/emoticons/dry.gif And is sogy as, its better, but still!
I prob need new shockes,

[JoellaRolla]

Pic of front droped a bit>[attachment=14579:attachment]

[japlish]

it sorely needs those 14's on it now, find sum tires!!!!!!! http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif

[Bustin_86]

Lookin a bit better... You will definately need new shocks though aye. My car handles so much better with some decent shocks.

What shocks are you thinking of getting? Get something short stroke hey.

[JoellaRolla]

Put rears in today. Took like 15 mins. Yeah definetly need new shocks in front, the rears are good though. THe kings arnt to bad. To stiff for speed bumps but not stiff enough for track. Like there hell better then what i had in it and for $180 you cant go wrong.
[attachment=14627:attachment]
[attachment=14628:attachment]

[Bustin_86]

Cut them, get it slamming

[stouty]

I agree

[Javal]

Get some decent shocks and fat 14's happening.

[JoellaRolla]

Yeah but first i got to buy a new windscreen cuz mine is now craked! I think it was started from me jaking one wheel up at a time when put springs in. So that will put me off bying some tyres for the rims...

[Bustin_86]

You think that you broke the windscreen by jacking up one wheel at a time?

Pretty unlikely, unless if your car has a huge amount of chassis flex lol!

This is how i jack my car as i cant get my jack onto crossmember. Never had any issues apart from bent sills.

[JoellaRolla]

You think that you broke the windscreen by jacking up one wheel at a time?

Pretty unlikely, unless if your car has a huge amount of chassis flex lol!

This is how i jack my car as i cant get my jack onto crossmember. Never had any issues apart from bent sills.[/b]
I think that it started a crack. And the rest was caused from driving. Not sure.... Cuz i didnt notice it the night before when i was um ..... doing stuff... http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[Bustin_86]

Sliggety's hey http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[JoellaRolla]

Sliggety's hey http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif[/b]
Only gravel.. Cuz the old fart i was driving with would have gone on about hoons and stuff, if i had some fun on the road. And it was wet and not raining and drove past empty car park with trolley bays just waiting to be rounded up. DAM YOU KRANKY OLD FARTS! http://www.ae86drivingclub.com.au/forums/emoticons/dry.gif

[JoellaRolla]

I did this a while ago and though i would post it..
[attachment=15087:attachment]
[attachment=15088:attachment]
[attachment=15089:attachment]
[attachment=15090:attachment]
[attachment=15091:attachment]

[Bustin_86]

dude. Thats pretty dodgy... need to find some better donor pics for rims those ones are shocking res. Also, front bumper is ridiculously out of perspective.

Try to use noise for where you put background over the car to make the ute, should help it to blend in more.

[JoellaRolla]

Man i was muckin round only do it for fun. Ae86 front bar. bmw side skirts. bmw rear bumper to.

[JoellaRolla]

Me mum drove my car the other day and came home and said that the gear box is playing up... so i was like ok... and went out to cheak it out and put my foot on clutch and hello no clutch pressure.. had a closer look and yeah as i thought rubber seal is detiriated.. so prob new master cylinder... Do the te72s have a slave cylinder? cuz if i replace one, i heard that the new great presure from the new one can split the old slave? Happened to my bros silvia.

[outcast350]

That's a horrible, horrible thought - RS1800 ute. Lol.

Cool car though, yours that is.

[Bustin_86]

Yes t18's have a slave cylinder.

[JoellaRolla]

Yes t18's have a slave cylinder.[/b]
Yeah found it today... $90 for master. prob order tomorow..

[MINIHORSE]

Ordered the parts yesturday. Parts will be in the sarve. I waited for my mate to come back from hollys, so i could get it for cost price. costs now are...
$55 for master
$16 for slave
This fella saves me alot of money. lol. cheap i no. but if you only got $70 a week to spend on a car you would be cheap to.

[Bustin_86]

Sounds about right, my mech only charges me cost price as well. Good bloke.

So are you still planing on lowering it some more?

[JoellaRolla]

Sounds about right, my mech only charges me cost price as well. Good bloke.

So are you still planing on lowering it some more?[/b]
Na not yet not till get coil overs in about 6 months time.

[JoellaRolla]

clutch gear is in... will be out tomorow night to test it out. http://www.ae86drivingclub.com.au/forums/emoticons/greenbounce.gif

[japlish]

until the first clutch kick....clutch?what clutch? http://www.ae86drivingclub.com.au/forums/emoticons/fap.gif

[JoellaRolla]

not much hapening on this car.... got some tyres so the rims will be on shortly. But part from that nothin,

[JoellaRolla]

Got tyres now, Got them one the rims, They look great!
Will post pictures soon http://www.ae86drivingclub.com.au/forums/emoticons/rolleyes.gif
Im not used to having so much more grip on the front. Its great.
Will have to roll the gards out soon,
Can any one give me some advice or send us a link to a process please.

[JoellaRolla]

hope to have one of these soon http://www.ae86drivingclub.com.au/forums/emoticons/greenbounce.gif


2 way would be orsome

[japlish]

Will have to roll the gards out soon,
Can any one give me some advice or send us a link to a process please.[/b]
oh oh pick me, pick me!! i gotsa hammer! http://www.ae86drivingclub.com.au/forums/emoticons/greenbounce.gif

[JoellaRolla]

Pic of it now!
[attachment=16905:IMG_3070_1.JPG]

[JoellaRolla]

More pictures...
[attachment=16941:IMG_3078.JPG]
[attachment=16942:IMG_3081.JPG]
Rear needs to be lower!

[Bustin_86]

Dude.

Slam. It. Hard.

Im on my L's as well, doesnt matter shit. Just drop it till it grinds!

[JoellaRolla]

Dude.

Slam. It. Hard.

Im on my L's as well, doesnt matter shit. Just drop it till it grinds![/b]
Already does on the front gards! Yeah ae every body says no you shouldnt do stuff on your L's.
Why not! Best time to learn, Dont worry already messed up one clutch, new one should be bout a month away,

[Bustin_86]

Yerr man, just fuckin go hard.

Mum kept complaining about the fumes from my stripped interior and flame shooting exhuast and how it gave her headaches.

So i put a box of panadol in the glovebox.

Lower it and flare the guards man, it aint rocket science!

[paulie]

Well the last couple days have been intresting...
I started her up the other day (monday) Shes cold, got no choke so takes a bit to get her going, She started then conked went to start her again and nothing...
Started testin stuff, Battery, starter,
Then tested that the engine could turn over, Started manally turning it over and smack dead stop turn back ford again, smack... it turns one way till close to top dead centre then back again till near top dead centre again so does about 360'.
So today pulled Rocket cover off,
valves sitting right. yep,
cheaked the timing chain, fine, didnt jump a tooth
cheaked that nothing was in the cylinders, perfect
spark plugs in tacked,

Singled it out to bottom end, because when was looking at timing belt to where it stopes, i can still rotate the top end so it is the bottom end, not sure yet... Any ideas? <_<

[Bustin_86]

new 3t time lol

[JoellaRolla]

4age Time.lol

[JoellaRolla]

Well pulled off rocket cover... Valve stems are there but cant tell yet if the actual valve seal is there,
Pulled timing chain cover off and cheaked that it didnt jump a tooth,
Pulled off sump all intact (not like my last 4ac....)
So shall be pullin off the head ether tomorow or the next. Will see if there is anything in cylinder one, other than that im stumped... :blink:

Sorry some stuff has been repeated.

[JoellaRolla]

Found the problem!!!
http://img152.imageshack.us/img152/4900/img31031yu5.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/150584.jpg
Some of the damage...
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/150585.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/150586.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/150587.jpg
And this is what caused all the fuss!
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/150588.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/150589.jpg
Thats it.... well now fun of putting it back together.

Some of the tools i used lol.
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/150590.jpg
http://img297.imageshack.us/img297/9240/img31011qg6.jpg

[JoellaRolla]

Cheaked the valves by putting kero on the head, Both of the valves where leaking in cylinder 1... so got a valve compresor and pulled out those to valves one has a bent sharft, the other a bent cap.
There isn't that much carbon build up in there but Is there a way to remove that carbon on a low budget?

[japlish]

my 'experimental' rims on joels car (while he was fixing his motor,lol):

http://img340.imageshack.us/img340/4862/te722xx4.jpg (http://imageshack.us)
http://img166.imageshack.us/img166/5632/te72rj7.jpg (http://imageshack.us)
14x8 -20 offset.

[JoellaRolla]

Lookey what i got ...
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152328.jpg
http://img48.imageshack.us/img48/2982/img3336lk8.jpg
http://img48.imageshack.us/img48/7730/img3338no7.jpg

[JoellaRolla]

righteo. Long time no post.
had valves reseated. new head gasket, runs like gold now.

Now replaced all steering joints.
Corona lower arms.
2 way lsd fitted.
saas steering wheel fitted.
2 inch exhurst fitted, off exstractors
lots of stuff.

[floody31]

Awesome! Go T18s!

Same colour as mine and all. Any current pics?

[JoellaRolla]

yup.
[attachment=25375:IMG_38383.jpg]

[LIL BLU MAN]

what wheels are they on the front champ?
clean as car btw

[floody31]

Ahhyes, this is the one on Toymods for sale?

[JoellaRolla]

<div class='quotetop'>QUOTE (w84me @ Apr 29 2008, 09:46 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=524464)</div>
what wheels are they on the front champ?
clean as car btw[/b]
don't know, my freind got them off a datsun

[JoellaRolla]

<div class='quotetop'>QUOTE (floody31 @ Apr 30 2008, 12:32 AM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=524533)</div>
Ahhyes, this is the one on Toymods for sale?[/b]
yeah.... don't understand why nobody interested in it. Like its a complete set up. finished!
so o well. thats life.