PDA

View Full Version : noob!! engine` brakets



350hp4agte
21st March 2009, 04:41 PM
so i need to no were all the engine brakets go or if a st20v block is different to a 16v jdm block or if im trippin out (most likely the case)

i have got brakets of a jdm 16v but i either cant get the right combo of were they go or the blocks are different or some sh*t

if any one has pics that would be great a 20v or 16v i dont really mind

cheers guys

and go f^ck yourself Sandiago

Sprinter86
21st March 2009, 04:51 PM
they should all bolt up to the 20v block without a hassel, i found that the passengers side gearbox to block bracket would only line up with one hole on the block.

engine mount steel brackets should sit as normal.

350hp4agte
21st March 2009, 06:36 PM
so is this how its ment to look \/\/
http://img8.imageshack.us/img8/4155/p3211738.jpg (http://img8.imageshack.us/my.php?image=p3211738.jpg)
\/\/\/\/\/ this dont fit
http://img13.imageshack.us/img13/7474/p3211736.th.jpg (http://img13.imageshack.us/my.php?image=p3211736.jpg)
because of this \/\/\/\/
http://img10.imageshack.us/img10/6011/p3211737.th.jpg (http://img10.imageshack.us/my.php?image=p3211737.jpg)
just a random pic \/\/\/\/\/of my fully forged built motor
http://img16.imageshack.us/img16/528/p3211740.th.jpg (http://img16.imageshack.us/my.php?image=p3211740.jpg)
and can i use this \/\/\/\/\/ instead of those 2 side bits i.e the top pic
http://img16.imageshack.us/img16/3826/p3211743.th.jpg (http://img16.imageshack.us/my.php?image=p3211743.jpg)

Sprinter86
21st March 2009, 07:09 PM
about the drivers side engine mount, bolt that on before you fit the alternator bracket, you put that on afterwards.

you seem to have the gearbox stays in the right spot. that large single peice is for FWD i think so no you cant use it.

350hp4agte
21st March 2009, 07:11 PM
so do i just cut that locator off in pic 3 other wise it wont go

Sprinter86
21st March 2009, 07:14 PM
oh yea forgot about that, i just got some vice grips and locked onto it and twisted it out.

350hp4agte
21st March 2009, 07:16 PM
word!! i just wasnt sure if i had all the brakets an shit i didnt want to do it b4 i new that it was right cheers for the help man