PDA

View Full Version : carramrod!! 4agte 20v ae71



350hp4agte
22nd March 2009, 07:08 PM
thought I mite post it back up I’ve been slowly building this car for a while now it’s getting there I almost have everything I need to finish minus a few bits an pieces

The car is an AE71 slant front

Mods

Engine: 20 valve st

weisco forged pistons 8.9:1 30thou over
Argo rods
ACL race series bearings
ARP head, crank and rod studs
Cometic steel head gasket
The head has been extensively ported
Has yager performance valves and valve springs
Kelford cam, cams
JUN adjustable cam gears
550cc usdm 2j injectors
Magnafuel regulator
T2871RS disco with .64 rear ar (will be externally gated tial 44mm gate)
HALTECH E8 ecu
LS1 coils

Drive line:

W57 supra box
Ajps bell housing
Internal slave (as in no clutch fork thing it’s all inside the box :cool: )
Direct clutch performance 5 puk unsprung brass button
Mick’s performance clutches lightened flywheel
Diff is a modded hilux with 4.3 gears r31 shafts, discs and brakes

Suspension and wheels

Cusco front and rear strut braces
S13 front coilovers (chasing new inserts)
Cusco camber tops
Custom made rose jointed LCA's
Custom made rose jointed caster arms
whiteline adjustable swaybars front and rear
trd 8 way adjustable rear shocks
trd 7kg springs
GILLY supplied 4link
Wheels are RS8's 15x6.5 +20 (there away at the moment getting modded to 15x9.5 :DD )
and MARCH SPORTS 15x7 + - 0

body:

I haven’t done much to the body yet just stripped it no deadener etc
I plan I pumping the wheel arches to fit the 15x9.5's
It’s getting a full cage weld in type with side bars overhead bars etc
I plan on painting it nissan micra blue at this stage but I’ll probably change my mind I’ve also go the seats already sitting on bride rails so they sit nice and low.

That’s about all I can think of at this stage let me know what ya think I’m open to any criticism and I’m happy to ask any questions


http://www.ae86drivingclub.com.au/dcimages/7/4/7/9593.jpg (http://img7.imageshack.us/my.php?image=dsc00108t.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9594.jpg (http://img6.imageshack.us/my.php?image=dsc00124buk.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9595.jpg (http://img8.imageshack.us/my.php?image=dsc00126lhr.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9596.jpg (http://img7.imageshack.us/my.php?image=dsc00122zow.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9597.jpg (http://img6.imageshack.us/my.php?image=p3010611.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9598.jpg (http://img4.imageshack.us/my.php?image=p9140683.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9599.jpg (http://img6.imageshack.us/my.php?image=pb060229.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9600.jpg (http://img17.imageshack.us/my.php?image=pb060227.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9601.jpg (http://img9.imageshack.us/my.php?image=post8001190767724thumb.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9602.jpg (http://img8.imageshack.us/my.php?image=phonepics114.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9603.jpg (http://img27.imageshack.us/my.php?image=phonepics115.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9604.jpg (http://img25.imageshack.us/my.php?image=p9011106.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9605.jpg (http://img8.imageshack.us/my.php?image=p9011101.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9606.jpg (http://img18.imageshack.us/my.php?image=p8180915.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9607.jpg (http://img8.imageshack.us/my.php?image=p4090795.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9608.jpg (http://img9.imageshack.us/my.php?image=p4090779.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9609.jpg (http://img8.imageshack.us/my.php?image=p4090781.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/9610.jpg (http://img7.imageshack.us/my.php?image=p8180918.jpg)

cheers

350hp4agte
22nd March 2009, 07:12 PM
i only got the engine back last weekend here's a pic

http://img16.imageshack.us/img16/528/p3211740.th.jpg (http://img16.imageshack.us/my.php?image=p3211740.jpg)

ae71neo
22nd March 2009, 07:15 PM
Sounds like this would move! Good luck with it all :)

corknose
22nd March 2009, 07:45 PM
what lca's u got in?

350hp4agte
22nd March 2009, 07:50 PM
modded s13

and cheers ae71neo

Hokey
22nd March 2009, 10:30 PM
any photo's of the lca's? u build them urself? want to make my own and need some ideas.

cheers

350hp4agte
25th March 2009, 09:14 PM
the lcas are still in the jig doing some R&D i'll got photo's up at a later date

In other news i bought another ke70 flat font today $100 very minimal rust has a very minnor ding in the front no biggy hardly any damage

im also in the prosess of buying brand new t18 bumpers (see how we go tho!!)

350hp4agte
15th April 2009, 09:51 PM
update engin is in yay well in for a little while its in so all the gear can be made for it then out for paint
gearbox is in, gearbox cross member made
decided to use a full custom made plenum now with 770cc injectors (on there way) the boys at work are making me a 25mm thick intake flange and also the bosses for the injectors so that should save me some money there i bought a 90mm BMI throttle body a 13row oil cooler.
Micks metal craft intercooler awsome size so so cheap
alloy catch can

http://img14.imageshack.us/img14/8430/ef1f1.jpg (http://img14.imageshack.us/my.php?image=ef1f1.jpg)

alot more Photos up tomoro

cheers guys

corknose
15th April 2009, 10:01 PM
looking so sweet caint wait till this is finished gunna be a beast

R&D Mechanical
15th April 2009, 10:10 PM
looks fucking sick mate! cant wait to see more pics

timmay
16th April 2009, 12:52 AM
car ram rod hehehehe super troopers ftw... ''does that look like spit to you... aaarrrr fuk it''

350hp4agte
16th April 2009, 06:24 AM
hahahahahahahahahha

350hp4agte
16th April 2009, 09:00 PM
Cheers for the coments

More pics up

TRD 8 way shocks TRD 7kg springs GILLY 4 link
http://www.ae86drivingclub.com.au/dcimages/7/4/7/11839.jpg (http://img6.imageshack.us/my.php?image=p4161796.jpg)
engine in
http://img24.imageshack.us/img24/9866/p4161788.th.jpg (http://img24.imageshack.us/my.php?image=p4161788.jpg)
FUNCKIN TWIN TURBO WHAT THE
http://img23.imageshack.us/img23/6509/p4161799.th.jpg (http://img23.imageshack.us/my.php?image=p4161799.jpg)
PWR radiator and Micks metal craft 100mm cooler
http://www.ae86drivingclub.com.au/dcimages/7/4/7/11842.jpg (http://img18.imageshack.us/my.php?image=p4161794.jpg)
pic of cooler in car (will site some were in there fits nice tho any where)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/11843.jpg (http://img16.imageshack.us/my.php?image=p4161792.jpg)
cooler
http://www.ae86drivingclub.com.au/dcimages/7/4/7/11844.jpg (http://img8.imageshack.us/my.php?image=p4161790.jpg)
engine
http://www.ae86drivingclub.com.au/dcimages/7/4/7/11845.jpg (http://img18.imageshack.us/my.php?image=p4161789.jpg)
hilux booster s15 master
http://www.ae86drivingclub.com.au/dcimages/7/4/7/11846.jpg (http://img9.imageshack.us/my.php?image=p4161797.jpg)
alloy catch can
http://www.ae86drivingclub.com.au/dcimages/7/4/7/11847.jpg (http://img18.imageshack.us/my.php?image=165e2.jpg)

Skid_KE70
16th April 2009, 11:06 PM
Tough. Will be fast

350hp4agte
20th May 2009, 08:49 PM
small update pics some time soon

i bought a 200amp tig so i have started making my turbo manifold and a few other bits

770cc siemens VDA DEKA top feed injectors came the other day (should be big enough)

my TRD shocks are in at TRP getting reco'ed at the moment my steering rack is there also getting a quick rack put in

ordered and paid for chrome bars with end caps this arvo should be here in a few weeks

i also got a inlet manifold flange CNC machined up 25mm thick so the plenum can be made with the 770cc injectors in etc

Pics asap

dr1ft-pig
20th May 2009, 08:55 PM
good to hear man, hope shes all done soon

350hp4agte
7th June 2009, 07:54 PM
hey guys got a few more things on the go now i brought some things go some things arrived
pics bellow
Chrome bars front and rear with end caps and new indicators
http://www.ae86drivingclub.com.au/dcimages/7/4/7/15713.jpg (http://img195.imageshack.us/my.php?image=p6071952.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/15714.jpg (http://img3.imageshack.us/my.php?image=p6071957.jpg)
http://img192.imageshack.us/img192/6039/p6071957.th.jpg (http://img192.imageshack.us/my.php?image=p6071957.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/15716.jpg (http://img5.imageshack.us/my.php?image=p6071956.jpg)

CNC machined plenum flange made so i can use 770cc injectors
http://www.ae86drivingclub.com.au/dcimages/7/4/7/15717.jpg (http://img7.imageshack.us/my.php?image=p6071958.jpg)
http://www.ae86drivingclub.com.au/dcimages/7/4/7/15718.jpg (http://img26.imageshack.us/my.php?image=p6071959.jpg)

I got my TRD shocks recoed the other day minty frish now
http://www.ae86drivingclub.com.au/dcimages/7/4/7/15719.jpg (http://img194.imageshack.us/my.php?image=p6071960.jpg)

just another pic of the 90mm throttle body
http://www.ae86drivingclub.com.au/dcimages/7/4/7/15720.jpg (http://img195.imageshack.us/my.php?image=p6071961.jpg)

LS1 coils
http://www.ae86drivingclub.com.au/dcimages/7/4/7/15721.jpg (http://img189.imageshack.us/my.php?image=p6071962.jpg)

i brought this to its a hydrolic handbrake master cylinder, figure i can make the leaver myself
http://img5.imageshack.us/img5/9025/p6071963u.th.jpg (http://img5.imageshack.us/my.php?image=p6071963u.jpg)

Brand spanky 200A tig helps when ya bro works at trade tools
http://www.ae86drivingclub.com.au/dcimages/7/4/7/15723.jpg (http://img13.imageshack.us/my.php?image=p6071964.jpg)

and brand new 770cc VDO top feed injectors with new plugs
http://www.ae86drivingclub.com.au/dcimages/7/4/7/15724.jpg (http://img13.imageshack.us/my.php?image=p6071965.jpg)

got my quick rack fitted also
http://www.ae86drivingclub.com.au/dcimages/7/4/7/15725.jpg (http://img190.imageshack.us/my.php?image=p6071954.jpg)

corknose
7th June 2009, 11:31 PM
whats the quick rack? im guess more sensative steering?

Sam-Q
8th June 2009, 01:36 AM
I really look foward to this build, was the clutch release an off the shelf part?

350hp4agte
8th June 2009, 11:04 AM
quick rack is a quaife (i dont no how to spell it) but its a different gear ratio so its 2.5 turns lock to lock

sam the clutch slave cylinder was on the gearbox when i got it. I have pulled it appart it seemed easy enough to make if you have access to a lath, I have to pull the box out again soon for pint ill pull it appart again and take some pics

sundee
8th June 2009, 11:27 AM
turbo decision yet man?

350hp4agte
8th June 2009, 11:34 AM
page two winner = sundee86 yay

i never got a chance to ring gcg last week at this stage im going to keep the t2871r but i will call them next week see what they recon, i think for drift which is why i built the car the t28 will be the best option in the end and really anything over 250hp is gunna be awsome and that turbo should be able to produce that easy i figure if its a 480hp rated turbo anything up to 380hp should be reachable

350hp4agte
12th August 2009, 08:27 PM
up date only small but an update all the same

turbo choice: my machanic has a datto 1200 ute at the mo his doing its got a ze with a st20v head, so stock ze bottom end and a rebuilt mildly ported 20v head haltech E8, plenum + 550cc injectors, cooler and 3" exhaust. So what we decided was that i would give my machanic my T2871rs to put on said datto and see how it runs ie when boost comes on how much power etc, if it works out that the t28 is mint for what i want i'll just get another brand new turbo, but if it works out that its not what i want i;ll upgrade at no extra cost.

On another note i've been makin some rose jointed LCA's wich are working out quite nice ly i must say i made them 10mm shorter than a stock sylvia lca at its logest reach and it works out to be about 35mm shorter at its shortest reach
I cut the old lca up and used its "ball joint" then fabed it up with 16mm pipe with a wall thikness of 3mm there still in the R&D stage but you can see whats what in the pic, not sure how im going to do the caster rods yet, but im useing an inline rose joint for the swaybar mount.

Also purchased some tokico HTS102F front inserts (thanks to PATIENCE)

http://img15.imageshack.us/img15/3994/p8121973.jpg (http://img15.imageshack.us/i/p8121973.jpg/)

http://www.ae86drivingclub.com.au/dcimages/7/4/7/20556.jpg (http://img194.imageshack.us/i/p8121980.jpg/)

350hp4agte
27th May 2013, 09:08 PM
Any old school lads know where my motor ended up would love to find it not to many 20v's out there like it