PDA

View Full Version : Help:I need a t28 impeller!



what-psi
24th March 2009, 07:06 PM
Hey all,
As it says i need a t28 impeller as mine has a nasty crack, chip out of it.
I would put this in the wanted forum, but i'm quite happy to get a new chinese one if someone can direct me the right place to head as i don't want to pay heaps for it as the turbo's aren't worth too much.
Or if anyone has a t28 with a cracked housing, hit me up!
Many thanks
matt

Hokey
24th March 2009, 10:56 PM
i've got a t28bb here that's complete. needs new oil seals. bearings aren't too bad but would prolly replace them anyway. take the whole thing for 50

--Redwork--
24th March 2009, 11:09 PM
Where the crack.???

If its on a fine near the front just break the the cracked section of impeller with a pair of pliers... Better to have a bit missing than have a bit that could potentially come off and destroy your engine...


Having a bit missing is not as terrible as it sounds...
Friend bent a fin one day when he was working on his turbo and just broke the bent section off as to avoid any problems later...
Turbo is still fine and he makes 1200hp..

what-psi
25th March 2009, 12:11 AM
i've got a t28bb here that's complete. needs new oil seals. bearings aren't too bad but would prolly replace them anyway. take the whole thing for 50

Done hold that for me mate, and i'll pm you some time later in the week to come down and get it.

Dan_J
25th March 2009, 01:10 AM
i've got a t25 for 100. good condish, melb

Hokey
25th March 2009, 06:30 PM
t25 off ca or t25g off sr? if it's an sr turbo i'll take it

Dan_J
26th March 2009, 12:15 AM
yea sorry, off a sr20det redtop 100,000 kms

choonga
26th March 2009, 12:39 AM
t25 off ca or t25g off sr? if it's an sr turbo i'll take it

if you don't end up buying it.. shot gun next!

Hokey
26th March 2009, 06:21 PM
you can't have the wheels and the turbo. i'll let you buy the turbo and i'll get the wheels :D

choonga
26th March 2009, 06:44 PM
hahahah... you can have the turbo then :P