Genuine Parts, Part numbers

[Jonny Rochester]

See also: Here (http://www.ae86drivingclub.com.au/forum/index.php?showtopic=12223) for body pannels, lights etc.


This is actualy a fairly big topic, and I will add more stuff and advice on how to deal with Spare Parts guys at your local (un)friendly Toyota dealership. For now, I will list common parts you may want to buy which are probably avaliable, and less common parts for GT spec. Others can add what price they paid and who they talked to, so others can know what to expect. But if you are armed with a ID plate, a Toyota parts man should be able to get almost anything. Many parts are different between early model and late model, and the date change is 8505 (May 1985). But many other mechanical parts have been changed at different dates.

Price:
I have put up the suggested list price, which maybe out of date by a few months or years.

JDM parts, most not in Europe or America:
####-#### Apex/Levin/Trueno rear stickers. Lots of colors, combos etc...
81210-12030 fog lamp, RH late model levin apex
81220-12020 fog lamp, LH late model levin apex
81550-1A230 RH tail light, early levin 3D (lotus)
81550-1A231 RH tail light, late levin 3D (whiteline)
81611-12290 RH park light, late levin

81550-1A291 RH tail light, late trueno 3D (redline)
81560-1A291 LH tail light, late trueno 3D (redline)
75803-12070 centre moulding, late trueno 3D (redline)
81270-12320 lamp assy, licence plate. all JDM except late 2D

... I can't be bothered posting up all body parts right now.


General AE86 parts for GT, GTV, Apex, GT-S:
04111-16024 full engine gasket kit 4A-GEU
04112-16024 head gasket kit 4A-GEU
90105-10076 flywheel bolts $3.50 +GST
90311-70004 rear main seal
90311-70007 rear main seal AE92 $36.05 +GST
90311-32020 front seal $10.71 +GST

12511-16011 Cast iron alternator bracket $127.11 +GST
16381-16010 Top adjuster alternator bracket $13.08 +GST
16371-16021 Waterpump pulley $54.53
5PK835 or 5PK840 fan belt (generic belt number)

78180-12410 accelerator cable (RHD 4A-GE)

16331-16020 outlet, water (front of head, fitting for rad hose)
16323-16020 thermostate housing 4A-GE $63.78 +GST
11181-16030 water block at back of head 4A-GE $61.50 +GST
16110-19155 waterpump complete 4A-GE $80.40 +GST
16571-16010 top radiator hose 4A-GE $22.38 +GST
16572-16010 bottom radiator hose 4A-GE $22.38 +GST
16401-63010 radiator cap
16405-16010 coolant overflow bottle
16611-16010 bracket for overflow bottle (same bracket is on AW11 and Coaster Bus)

90915-10004 oil filter (Denso Japan)
90915-YZZE2 oil filter (Denso Thailand)
Z386 generic oil filter from Ryco

85331-12340 or -12350 windshield washer bottle (RHD, 4A-GE)

31470-12050 clutch slave cyl
47201-12340 brake master cylinder
04493-12120 brake master cylinder kit
04479-14060 front brake seal kit (all)
14479-12110 rear brake seal kit (disk)
46420-12300 RH handbrake cable (disk)
46430-12200 LH handbrake cable (disk)

04421-14010 rear axle bearing kit (early and late disk)
90311-52059 rear axle seals (disk brake) $13.90 + GST
42311-12100 rear axles (disk brake, early)
42311-12101 rear axles (disk brake, late)
90942-02047 rear axle studs
41201-29207 final gear kit, N=43:10
90116-08235 studs for diff housing, short
90116-08236 stud for diff, long

31321-12030 clutch and brake pedal pads
55478-12040-01 clock suround, black $12.70 + GST
58951-12091, or -12101 center consol lid
69260-14020-01 or -14030-01 or -12090-01 window winders, black (same as AW11)
81241-20060 interia light lens (same as HiLux duel cab)

45611-12917 RH steering knuckle (power steering or GTV)
45612-12917 LH steering knuckle (power steering or GTV)
45522-10021 rack bush, manual steer $36.37 +GST

23206-16170 in-tank fuel pump bracket
## see below ## in-tank fuel pump (same as most other Toyotas of that era)
23091-12020 short fuel hose between 8mm line and tank
77205-12120 hard fuel line 8mm (EFI 4A-GE) $76.45
23300-19025 fuel filter with bracket (EFI) $95.50 + GST
90923-01278 flex fuel hose in engine bay, banjo ends
90401-12097 banjo bolt for fuel filter

75531-12270 top outer windscrean moulding, alloy $70.95

door hinge ~$45 each

76081-12010 front lip (early levin, includes bolts) ~$300

33548-14010 plastic bush on gear lever
31126-20070 rubber boot for clutch fork $22.75 + GST


Interia COLOUR
For a trim part, the last number refers to the colour. -01 means black. For early JDM models, most interia parts were either maroon or blue. For late model cars most parts are black.
-01 black
-02 maroon
-03 gray
-04 blue
-05 beige
-06 brown
-08 ivory
-11 new black
-13 gray
-14 blue
-16 brown
-59 dark blue

[Jonny Rochester]

Just for fun, fuel pumps...

23220-16070 AE86 fuel pump (EFI)
23220-16080
23220-16082
23220-16083
23220-19015
23220-16190
23249-43080
23220-16084

All these numbers are for AE86 in-tank fuel pump. (Pump only, no bracket) Either Denso or Aisan, and seam to have been updated every year. But use the same bracket.

The exact same pump is also for:
RT142 Corona (22R-E)
AE82 Corola (4A-GE)
AW11 MR2
MA61 Supra
RA65 Celica
ST16# Celica (3S-GE)
SV11 Camry
SV21 Camry
GX71/MX7# Cressida
MS123 Crown
YR20/22 Tarago
FJ62 Landcriuser (3FE)
4-Runner (with 22RE or 3VZE)


23249-43080 This pump is listed for AE86, but is also listed for:
AW11 MR2 (4A-GZE)
ST165 Celica (3S-GTE)
MA70 Celica (7M-GTE)
and some bigger stuff like that. I can't say it is better, maybe it is the same. But it would be the one to order I guess for a factory fit, and possiably flow some more?

[Brendo]

good stuff mate you've helped me out and im sure many others too...

[Jonny Rochester]

I just looked up the steering rack and pinion and housing. AE86 is exactly the same as KE70 and AE71. If there is a difference, it is because our KE70's are made in Australia, maybe with a localy supplyed rack.

[parrot]

EFI fuel pump in tank gasket 77178-10010 $19.38 3 weeks via Japan

Fuel sender gasket 77169-14020 $6.82 in Sydney

Burgundy trim clips 90467-07041-52 $1.43 each Sydney
(the ones that push in the centre

thermostat gasket (paper) 16325-70021 $4.30 Sydney

burgundy clock surrounds (have tried to order again after Jonny's post - will advise)

[Jonny Rochester]

Was told today the fuel line was not available http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif
I still have my doubts. Has anyone ordered this before?

[parrot]

Was told today the fuel line was not available http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif
I still have my doubts. Has anyone ordered this before?[/b]


I bought a brand new one recently of thanhngo who had got it from Toyota but never bothered to fit it. Not sure how long ago he got it.

I had previously bought an AE82 twin cam one and bent it up to suit (many years ago).

[Jonny Rochester]

OK, just ordered the fuel line now! ^^ I changed the part number to the earlier one and it was already on the aussie system due to thanhngo previously having ordered it. Still has to come from Japan but, 4 weeks.

I believe almost everything is available, even if you are told it is not. Just need to sus out the system. Will post about it soon. Most Toyota parts guys in Australia believe their computer too much and think its linked to a world system. Fact is they are on a aussie toyota network, and JDM part numbers will not come up unless someone has ordered it before. There are ways....

[parrot]

I went into Melbourne City Toyota the other day looking for a few obscure things armed with a JDM compliance plate. It was clearly all a bit too hard near the end of the day and the guy wasn't too keen and nothing was available. Especially keen on the handbrake surround rubber in the centre console which I would have thought available, and the burgundy clock surround. Lesson - find another parts guy.

[Jonny Rochester]

Bezel, auto clock hole:
55478-12040-01 black, in stock (even though not a AUD item)
55478-12040-02 maroon
55478-12040-12 maroon
55478-12040-04 blue

handbrake surround rubber:
This is not a seperate part. You would have to get the whole console.

[thanhngo]

For your restore project. I have ordered all these before. It can add up quite fast but I refuse to put anything remotely rusted on my car, even bolts and washers. Sorry Peter, I guess I got ripped off for the fuel line http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif

Item | QTY | Price | Dealer | Part number
Lower Radiator Hose 1 $21.45 Toyota Parts Lower 16572-16010
Engine Mount Nut 2 4.10 Toyota Parts 94115-41200
Engine Mount Bolt/Washer 1 2 4.60 Toyota Parts 90201-12208
Engine Mount Bolt/Washer 2 2 4.10 Toyota Parts 94511-01200
Engine Support Stud-Bolt 1 7.50 Toyota Parts 91621-61040
Exhaust Gasket 1 27.70 Toyota Parts 17173-16010 (17173-AE801)
Upper Radiator Hoses 1 $21.45 Toyota Parts Upper 16571-16010

Rocket Cover Nuts (intake) 4 16.15 Toyota Parts 90176-06012
Rocket Cover Washer 8 12.70 Toyota Parts 90210-06013
Clip Holder for mounts (brakes) 8 21.65 Toyota Parts 96991-10080
Ring for brake line 8 28.50 Toyota Parts 96160-01200
Rear Damper Bush 2 24.80 Toyota Parts 90385-16001
Cushion, UPP Rear Shock Absorber 2 7.70 Toyota Parts 90948-01003
Cushion, LWR Rear Shock Absorber 2 11.50 Toyota Parts 90948-01018
Cushion Washer for Shock Absorber (Top & Bottom) 1 2.60 Toyota Parts 90948-02002
Park Brake Cable R 1 83.60 Toyota Parts 46430-12200
Park Brake Cable L 1 83.60 Toyota Parts 46420-12300
Pin w/hole for Park Brake Cable 2 6.10 Toyota Parts 90240-08040
Rear Disc Brake UPR bolt $12.80 Toyota Spares 90119-08431
Rear Disc Brake LWR bolt $3.45 Toyota Spares 90109-08098
Retainer Washer for Shock Absorber (middle) 1 $3.00 Toyota Parts 90948-02007
Cotter Pin for Park Brake Cable 2 $2.40 Toyota Parts 95381-02020
Washer Caliper-Bracket 4 $5.55 Toyota Parts 94531-01000
Toyota Steering Mount Bushing 2 Toyota Parts 45516-12040 ("D" shaped mount) and without p/s 45517-12080
Flywheel Bolts (AE82) 8 Toyota Parts 90105-10076
Metal Brake Tube L (need JDM chassis) 1 17.40 Toyoa Parts 47324-12150
Metal Brake Tube R (need JDM chassis) 1 19.70 Toyota Parts 47325-12150
Propeller Shaft Insulator 1 33.50 Toyota Parts 37239-12040
Clutch Master Cyclinder 31410-20282

I lost my build spreadsheet in a HDD crash so this is all i have left http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif

[Jonny Rochester]

Thanks for that. I still have some parts to order, its good to know someone else has got these parts before. It means the number will work and can be ordered without drama.

^^ Your clutch master is wrong, thats a FWD Celica part no. No big deal.

About the prices I put up, only a very rough guide. Some do not include GST, or outdated, some maybe my special price, others may attract a shipping fee etc.

[thanhngo]

Hehe yeah, I think thats why I got my JDM bored and resleeved with SS...it won't be rusting anytime soon. But I do have a JDM bellhousing if that makes any difference but I can't verify the clutch cyclinder as I used mine existing one.

Most of my prices are retail, trade with GST included. I never paid shipping fees though (that I noticed). Definitely good to know actual prices so people know.

[parrot]

Ah, but when I buy off you I get to have a chat and lean on your car, plus don't have to wait 4 weeks http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif

[RobertoX]

johnny i have a large account with toyota, and i order loads of ae86 parts, my parts guy is a whizz, but he said no more rear bar covers are available??? can you shed light

thanks

[Jonny Rochester]

It seams Not Available can mean different things. No stock in Australia? No rear bar covers are going to be made again in Japan or anywhere, forever? I don't know, there would be a new one sitting in a dealership somewhere in the world. I guess you could call a dealership in NZ and pretend to be a local, and see what they could get. I looked up a front bumper once and got a price but was told I couldn't get it. (Needed price for insurance quote).

[RobertoX]

i got nz hook ups too wink! they have helped me out a few times

helps having fam there

ill post what i have in stock etc

toyota aus keeps a fair bit of stock now

[tin can]

hi all

ae86 late model rear bars are available but none in aus japan has none but will take 3 days to get them in then send to aus so 2-3 weeks

that also goes for the front




thanks jess

[driftke70]

great info, could i please get the codes for

coolant overflow ke70 83
interior light lens, the clear cover over the globe

cheers

[Jonny Rochester]

bad info deleted...

Give your frame number to the parts guy and he will look up the exact part. Aussie car so shouldn't be a problem, but coolant overflow may not be available.

[driftke70]

thanks alot for that cheif.

you can sort of make out my coolant overflow in my sig.
ahh ill just add a pic.

[Jonny Rochester]

85330-12091 Jar assembly.
This is my best guess at the number. The part includes the coolant and washer bottle in one, can't get them seperate as far as I can see.

[floody31]

Does toyota do what Nissan does with parts prices? From what I can gather every year a part gets older/less available Nissan up the price.
Case in point, R31 skyline bumper skins have gone from $96+gst to $196+gst in the last 4 years.

Hope they don't....

[Jonny Rochester]

Well the Nissan factory got shut down, so they had to run out of parts eventualy.

[harrygat69]

toyota hobart have rear 1/4 window seals in stock as i sent them back i know one time i could get new rear 1/4 window weather strip/ steel moulding thing but it was 340$ then i rang up 6 months later to get them but they couldnt get it any more
got front window top steel strip for bout 65$ part No. 75531-12270 but apparently the side ones are no longer avail'
drivers side door hinges top: 68710-32010
bottom : 68730-32010 bout 40 or 45$ each

thanks for the other part numbers jonny i will get my jdm washer bottle now ! and a few other bits and pieces
.mark

[kaibeecee]

this section is good.

Anyone by chance know OEM bushing part #'s? I've searched around, had some mixed answers.

[Jonny Rochester]

The bushes are mostly the same for any AE86 and KE70. Your local dealer can look them up easily. But not sure how easy they are to get. I got the numbers for you anyway. Personaly I have used polyurathane, Nolathane or SuperPro. Depends what feel your after. Note that you can get TRD bushes also, which are also black rubber. Maybe they are stiffer (not as stiff as polyurathane), or maybe they just cost more?

Front bushes:
48654-12010 lower control arm
48674-19058 or -12040 radius rod kit
48603-12010 RH strut top GT (more caster)
48609-12100 LH strut top GT
48603-12040 RH strut top SR (less caster)
48609-12130 LH strut top SR
48815-14140 D bushes
48817-20020 link bushes

Rear bushes:
48706-14010, 90385-20001, 90386-20001 panhard rod
4-link bushes, not a part, need to get whole arms.
48815-22100 D-bushes
90385-11021, and 48817-12010 link bushes

[Jonny Rochester]

A funny thing I find, repeatedly throughout the Toyota EPC it surgests the Australian AE86 sometimes came with powersteering. Were any Aussie cars fitted with power steering? Not that I knew of.

[tin can]

hi johnny

mate regarding the ae86

are you looking up the part numbers on microcat or epc (jap catalog)



thanks jess

[Jonny Rochester]

I have a old version of Toyota EPC. It goes from about 1979 to 1995, and is mostly for Europe, USA, Australia, Middle East. It does not cover Japan only models. But if you think about it, the only part numbers I don't get are for GTV stickers, Apex stickers, redline taillight, red flare on the kick pannel, electric windows. Thats about it.

I have a hard copy for KE30/TE37/TE51 etc parts. Also Euro, USA, Australia etc. Some parts are the same, good to double check.

I also have the TRD Corolla Bible. More for reference, probably not much use to order parts.

Hopefully I have a newish version of Toyota EPC in the mail, for Japan vehicles.

[parrot]

Went to another Toyota dealer today. What a laugh. After being told "we usually move people on who want import stuff, it just isn't worth it" when i pulled out a JDM build plate, he made a bit more effort.

Mind you I was in there for more than 20 minutes whilst he wrung his hands, pulled his hair, cursed and swore etc etc . Yes I am serious.

Anyway, the guy is trying to order a few things in. Apparently he requests an order from Sydney who then see if it is available via japan and then list it which enables the order to proceed! Sigh.

Anyway, have tried to order the burgundy clock bezel (colour 02 has been superceded by 12). Have actually ordered 2 as they are only $12 each and the dash will surely come out again sometime in the future. And if it is this hard to order them.....

Have also ordered the 5 tooth speedo gear per Jonny's other speedo drive thread. The 22 tooth plastic gear on shaft was available (2 in Brisbane) but cost $49 so i might have a look at a few KE70's first.

I have finally sourced some 14 inch Intra wheels (factory 14 x 6's) and am trying to order the Toyota caps that fit them. They may be a bit of a challenge.

Anyway shall update this when I hear back in about three weeks.

[Jonny Rochester]

Anyway, the guy is trying to order a few things in. Apparently he requests an order from Sydney who then see if it is available via japan and then list it which enables the order to proceed! Sigh.[/b]


This is also the procedure I have been told. Congratulations for getting a parts guy to order from Sydney, you are on the way to success! And I can order the same parts once on the system http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif
With all the imported diffs, you maybe the first in Australia to order the speedo gears!

[tin can]

hi all
guys i've been ordering jap parts for 4-5 years now
sprinter's
ke70's
soarer's
supra's
aristo's

and the list goes on

johnny where is your local warehouse would it be mel

[parrot]

hi all
guys i've been ordering jap parts for 4-5 years now
sprinter's
ke70's
soarer's
supra's
aristo's

and the list goes on

johnny where is your local warehouse would it be mel[/b]


Please tell me you are in Melbourne.......

[VIC_AE86]

Bezel, auto clock hole:
55478-12040-01 black, in stock (even though not a AUD item)
55478-12040-02 maroon
55478-12040-12 maroon
55478-12040-04 blue

handbrake surround rubber:
This is not a seperate part. You would have to get the whole console.[/b]

Only black is available, all those superceed to the black one.


johnny i have a large account with toyota, and i order loads of ae86 parts, my parts guy is a whizz, but he said no more rear bar covers are available??? can you shed light
thanks[/b]

You cant even get one made in Japan, hence why i bought one off you Dave and got ya to drop it @ Cornes..

Sorry Guys im out of the toyota scene, im in Honda parts now http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif

[tin can]

PARROT

nah mate i'm in syd but i have no probs sending parts to mel


thanks jess

[Jonny Rochester]

Im in Hobart. The local dealer is CO-OP Toyota. I have worked as a mechanic there. Even as a mechanic, I had to give one parts boy a 6 pack of Jim Bean once. Ended up getting the parts manager to look something up himself, and still had to give the boy his bourbon. So frustrating http://www.ae86drivingclub.com.au/forums/emoticons/rant.gif

[VIC_AE86]

Ha who was that John?

[Jonny Rochester]

I think it was Rob. He would point to random objects and say "why don't you put a 4A-G in that Jon", till someone kicked him in the nuts. He has moved on to service reception now. I won't name the current parts guys.

[VIC_AE86]

Ha ha yeah I was talking to him and hes a Service Adviser now bha ha ha

Just get Scotty onto it!

[parrot]

[quote]
[quote]
Bezel, auto clock hole:
55478-12040-01 black, in stock (even though not a AUD item)
55478-12040-02 maroon
55478-12040-12 maroon
55478-12040-04 blue


Only black is available, all those superceed to the black one.

I can confirm this unfortunately.

[Jonny Rochester]

So I have a more recent version of the Toyota EPC now, and Japanese area version also. Some interesting things I can confirm:

There was a GT model in Japan with T series rear end and drum brakes. Avaliable both early and late, and with a LSD option. Axles are different for the LSD (a bit shorter), and late axles are different to early ones of course. Early GT rear end would be exactly the same a TE72.

The AE85 actualy has a K50 transmission, not the T50.

Early JDM interias are all maroon or blue, not black. Late model interia is mostly black.

Early GTV 3D did not have a rear wiper.

Power windows only on late model Apex, not early ones.

The JDM AE86 did not have a oil cooler. The oil cooler was only a option in Europe. The 20valve did not have a oil cooler either.

On the GTV you can see a small bit of carpet between the gear stick and the hand brake. Not a full centre console.

[Ozdunker]

Not a full centre console.[/b]


No lid on the centre console container.

[mc68]

after being pushed back for trying to order trd engine mounts from my local toyota dealer (even through trade) didnt worry me, got them elsewhere
but parts like final drives (5.175) i kinda need to order through them http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

so, how do you plan your attack to the gimpy parts guy just shuts u down?

[Jonny Rochester]

All Toyota dealers can get TRD parts in theory, but some just don't know how. The TRD part numbers are not going to come up on the same system obviously, and if the dealer does not normaly do TRD they will have to ring around. Penrith Toyota (http://www.penrithtoyota.com.au/) are one of the best at getting TRD stuff. They have adversited this in magazines for years, and have a small TRD display at the parts counter (not just hats and shirts).

[Jonny Rochester]

You can't go to Toyota and just ask for a 5.175:1 diff ratio, the system is not setup like that. You have to know what vehicle the part is off, and they would prefer to have your exact VIN number. We have the EPC at home these days so can look it up and just give them the number. Parts men are not smart, thats why I am doing some background work.

The T series diffs only came in these ratios, 3.727:1, 3.909:1, 4.1:1, 4.3:1 and a few more, in Toyota cars.

TRD make available these ratios:
41201-TA001 4.625:1
41201-TA002 4.875:1
41201-TA003 5.125:1
41201-AE851 5.375:1
these are not Toyota numbers, they are TRD.

[mc68]

I know that! i had the part numbers, and have a fair few vins to choose from (hush hush)..

but yeah, do u suggest going thorugh my local toyota or just ringing up penrith direct?

[thanhngo]

Toyota final diff gears for t-series: (taken from club4ag) but I have checked the 4.7 and you can order it from dealers for ~$600 http://www.ae86drivingclub.com.au/forums/emoticons/fap.gif

41201-29406 3.308
41201-29287 3.583
41201-29227 3.727
41201-29237 3.909
41201-29197 4.100
41201-29207 4.300
41201-29626 4.556
41201-29637 4.778

above this will be TRD and the likes as Jonny says.

[driftism]

does anyone know if the rwd altenator brackets are available?

i assume the water pumps would definately be...

[Sparkle86]

Does anyone know the part no. for the RWD water neck? The bit that bolts to the side of the head that the rad hose goes on? I had a look through the list of part nos but couldnt find it.

[tin can]

Hi all

Sparkle86 the part that your are after is available out of Sydney warehouse I can send straight down to you overnight.

$130.00 plus freight

Thanks jess
0421820394

[stefan]

Basically if you see a price in my top post, I have bought it.

16331-16020 outlet, water (The bit that bolts to the side of the head that the rad hose goes on)

[hillclimb86]

does any one have part no for jap t 50 slave cylinder
mine caqme with out one.

[Jonny Rochester]

31470-12050 clutch slave cyl. 4A-GE

The TE72 one also works just as well, and easier to get. You could get a new one from ABS or Repco too. I suspect the genuine AE86 one is aluminium.

[albertos]

can u get a genuine gasket set,piston and rings pretty much a rebuild kit for a 4agze ae101

[Jonny Rochester]

can u get a genuine gasket set,piston and rings pretty much a rebuild kit for a 4agze ae101[/b]

I guess you probably could. Tell them you have a Levin GTZ:

E-AE101-ACMXR
4A-GZE
AE101-5018171

[andru_g]

<{POST_SNAPBACK}> (index.php?act=findpost&pid=360541)
can u get a genuine gasket set,piston and rings pretty much a rebuild kit for a 4agze ae101[/b]

I guess you probably could. Tell them you have a Levin GTZ:

E-AE101-ACMXR
4A-GZE
AE101-5018171
[/b]

Do you have the same info for a silvertop 20v (ie chasis no. etc) that i could use.. i got a few gaskets i wanna grab from toyota but the parts guys get cranky n they oD me some times

[Sparkle86]

Hi all

Sparkle86 the part that your are after is available out of Sydney warehouse I can send straight down to you overnight.

$130.00 plus freight

Thanks jess
0421820394[/b]

Thanks tin can you have pm

[Jonny Rochester]

Do you have the same info for a silvertop 20v (ie chasis no. etc) that i could use.. i got a few gaskets i wanna grab from toyota but the parts guys get cranky n they oD me some times[/b]



Here you go, one of many vehicles with the "silver top" 20 valve 4A-GE. The parts man should be able to order everything off this:

Corolla Levin GT Apex
E-AE101-ACMZF
4A-GE
AE101-5118694

[parrot]

Have also ordered the 5 tooth speedo gear per Jonny's other speedo drive thread. The 22 tooth plastic gear on shaft was available (2 in Brisbane) but cost $49 so i might have a look at a few KE70's first.

I have finally sourced some 14 inch Intra wheels (factory 14 x 6's) and am trying to order the Toyota caps that fit them. They may be a bit of a challenge.

Anyway shall update this when I hear back in about three weeks.[/b]


So 6 weeks later they finally arrived. Guy was very helpful today. This time he tells me they usually move people on because "we don't get trained in this stuff". But because I made an effort, knowing in advance the actual part numbers I wanted and having a Jap GTV build plate he was happy to help. He still checked them all though. Two of the caps arrived within a week, the other two took much longer. Funnily enough, a reasonable used set came up on ebay whilst I was waiting to hear if new ones where available, so got them too for $25! Just in case.

If interested, the centre caps for the option 14 x 6 Intra wheels are part no. 42603-12340 $23.19 each


The 5 tooth speedo drive gear is 33481-12030 $60.85

Hopefully that will pay for itself by not getting a speeding ticket. Just need to find the 19 tooth plastic gear now. (looks hopefully Jonny's way)

[andru_g]

Thanx Jonny Rochester you are an absolute champ!

[haado gei]

i have found a few dealerships unwilling to order jdm parts (make up excuses, dont evern try etc)... for the people in melbourne i HIGHLY reccomend Le mon toyota on dynon road footscray. they also order TRD parts.

[harrygat69]

tyred to order jdm windscreen washer bottle(85331-12340 or -12350)
and coolant overflow bottle (16405-16010) today but both come up as no longer avail' but both the power steering arms and water pump pulley were in stock in aus ! and the accelerater cable was ex japan

[Jonny Rochester]

After ordering a few bits and bobs I can now say I have had in my hand and touched everything I have tried to order. Success! Including some random "JDM" bits I was previoulsy told were not available. This includes little brake lines, fuel lines, stickers, rubber boots, relays etc. I am more confident I can get almost anything Toyota. It's just that Japan is a long way away, and the parts counter at the dealership is the biggest stumbling block. It is handy to have the same EPC on your own computer.

I will have a go at getting the bottles and other stuff people had trouble with sometime.

"Redline" tail lights:
81551-1A291 RH lens only
81561-1A291 LH lens only

81550-1A291 RH assembly with lens, globes, seals and harness
81560-1A291 LH assembly with lens, globes, seals and harness

75803-12070 centre moulding
90179-05095 x4 bolts/clips

81270-12320 lamp assy, licence plate

[SLO-030]

Hey jonny

Can you please tell me if the part number 12-150C is the correct one for JDM tails lights on a KE70?? I think they are KE70 or T18

[Jonny Rochester]

Toyota part numbers are 10 digits, like this: 00000-00000.
Often the part number will not be written on the actual part, but sometimes it is. There are often other manufacturing numbers on parts, some of which we will never know what they mean.

[riceburner]

What an awesome thread. I just read all 4 pages. lets keep it going.

JDM rwd big port alternator part number please, most of my sticker is busted but i make it out to be something like
2706 0 1 6 0 ? 0

Or is there a straight swap alternative. I searched google but nothing seriously stood out at me.

[Jonny Rochester]

27060-16010
27060-16050
27060-16090
27060-16011
27060-16012
27060-16091

Any one of these numbers will be a alternator for a RWD 4A-GEU. I know a dirrect swap is the alternator from a 20 valve, except the electrical plug is probably different. Oval instead of round.

[riceburner]

Many thanks jonny

Since i know my current one works or atleast once did ill go for 1 of the first 3 youve posted.

Thanking you.

[Robo86]

rear window seal (hatch) still available these days?

[parrot]

rear window seal (hatch) still available these days?[/b]

I have communicated with a guy in Thailand who lists all the seals for various earlier corollas on ebay about the possibility of sourcing AE86 rubbers. He is looking into it, seemed to think it would be a number of weeks before he knows if they can be produced. If I hear anything, I shall post it up.

[blacky86]

<{POST_SNAPBACK}> (index.php?act=findpost&pid=387816)
rear window seal (hatch) still available these days?[/b]

I have communicated with a guy in Thailand who lists all the seals for various earlier corollas on ebay about the possibility of sourcing AE86 rubbers. He is looking into it, seemed to think it would be a number of weeks before he knows if they can be produced. If I hear anything, I shall post it up.
[/b]

Looking forward for a response to this one. my seals are screwed and i don't want to spend 1k on Toyota replacements.

[RObErT_RaTh]

Rocket Cover Nuts (intake) 4 16.15 Toyota Parts 90176-06012

are these the chrome nuts holding the valve cover down, and im guessing it come in a pack of 4, any chance of a part number for the studs that tehse nuts screw onto?

[mr2gze]

Rocket Cover Nuts (intake) 4 16.15 Toyota Parts 90176-06012

are these the chrome nuts holding the valve cover down, and im guessing it come in a pack of 4, any chance of a part number for the studs that tehse nuts screw onto?[/b]

Yeh they are but there is nothing Rocket about them. You are mistaking Rocket with Rocker covers, however there are no rockers to cover on a 4ag.
The actual name for these covers are "Cylinder head covers", commonly called cam covers on OHC engines. Ergo the chrome nuts you are talking about are called, " Cap nuts for cylinder head cover"

#90176-06012 is for 1 cap, 4ag 16v requires 8.
It is also worth replacing the washers underneath.
#90201-10344 "plate washer for cylinder head set" They are ~$1 each.

The studs these screw into also torque down the cam bearings.
#90109-06079 bolt studs

cheers

[RObErT_RaTh]

<{POST_SNAPBACK}> (index.php?act=findpost&pid=403026)
Rocket Cover Nuts (intake) 4 16.15 Toyota Parts 90176-06012

are these the chrome nuts holding the valve cover down, and im guessing it come in a pack of 4, any chance of a part number for the studs that tehse nuts screw onto?[/b]

Yeh they are but there is nothing Rocket about them. You are mistaking Rocket with Rocker covers, however there are no rockers to cover on a 4ag.
The actual name for these covers are "Cylinder head covers", commonly called cam covers on OHC engines. Ergo the chrome nuts you are talking about are called, " Cap nuts for cylinder head cover"

#90176-06012 is for 1 cap, 4ag 16v requires 8.
It is also worth replacing the washers underneath.
#90201-10344 "plate washer for cylinder head set" They are ~$1 each.

The studs these screw into also torque down the cam bearings.
#90109-06079 bolt studs

cheers
[/b]

cheers for that, but yeh i just copied and pasted fromt he first page so someone would know what i was talkign about, and yeh i knew they also torqued down the cams hence why i called them studs, and ive got the washers already anyway, cheers again,

[mech`s blue]

hay johny just curious where you got your epc from and could you make it available to us?

[AE71 Rolla]

Does anybody know the part number for AE92 AFM GZE igniter?

[tin can]

ae71 rolla

89621-12010 rrp $495.00 and there is a day turn around to get the in to stock


thanks jess
0421820394

[harrygat69]

just confirming redline tail light part numbers they are right i have mine here now :)

81270-12320 lamp assy, licence plate : i think i need these lights tho i guessing i need to drill big holes in my car to fit them ?

oh and i got a jdm washer bottle 2nd hand from japan its like brand new :2thumbs:

[hachirusto]

ADDED nearly all of the part numbers to FAQ WIKI

[Robo86]

hey jonny.

whats the part number on ae86 jdm kouki front lip?

thanks mate

[Jonny Rochester]

There is non sorry. You have to use the early lip and make it fit somehow.

[mech`s blue]

hey johny you able to get the part number for the rear brake caliper anti rattle shims?(the ones that go between the pads and caliper)

i think there same as rear caliper ones on ae92 but my local pd wont tell or look.

cheers in advance

[crazy nanna]

Anyone know the part number for hand brake cables for a drum rear end? (T series)

[Benno]

with persistance, there is very little that you can't order from toyota ADM or JDM. parts guys don't like ordering from japan cos of the system. like jonny stated before, availability and price can only be give on parts that have already been in australia, "Not on file" only means nobody has ordered one into aus so it's not on the system. the process to get part onto the system involes bouncing E-mail between your dealership, sydney and japan.
which can take upto 3 weeks just to add part to the system so you can get a price and availability, then expect another 3 weeks to get here from the motherland. in the meantime (2 months) if the customer changes thier mind, the dealership is owns a(usually expensive and) unwanted part.

Having said that, a friend of mine has successfully ordered lower and upper sumps with pick-up for a JZX81(to convert supra/soarer sourced 1JZ to front sump) through my dealership.

best bet is to try finding a dealership that deals regularly with imports, be pesistant and offer a deposit on any items "not on file". add peice of mind to your parts guy knowing he won't get stuck with a bunch of JDM huchi parts that he has little chance of reselling.

[johl]

which lines do u mean chris? the front half from the hand brake or the ones coming out of the drums? i think the front half code is- Park Brake Cable R 1 83.60 Toyota Parts 46430-12200. thats what i found on one of the previous pages anyway. anyone bought new p/s arms? how much did they cost u?

[crazy nanna]

Hey mate I need the back halves. the ones that come out the drum. Theres only disk ones up as far as I could see

[Benno]

<div class='quotetop'>QUOTE (truenosedan @ Jan 14 2008, 04:18 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=468518)</div>
i have a close relationship with toyota here and stock many parts you may spend countless hours looking for and can order almost any part with ease!

shit i even have a brand new rad support in stock

along with various ae86 lights

ps arms

interior bits etc etc[/b]


good, it's guys like you guys that keep toyota on their toes, so that all the common JDM ae86 parts are already on file, makes it alot easier for the rest of us!

[Jonny Rochester]

<div class='quotetop'>QUOTE (Mech`s Blue @ Jan 10 2008, 02:01 AM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=465958)</div>
hey johny you able to get the part number for the rear brake caliper anti rattle shims?(the ones that go between the pads and caliper)

i think there same as rear caliper ones on ae92 but my local pd wont tell or look.

cheers in advance[/b]

04946-14010 shims kit
04948-12010 clips kit
04466-12100 brake pads only

04492-12031 brake pads and shims and clips kit


These parts are shared with the TE71 only. (AE92 maybe similar, but not the same part numbers).

[mello]

could i get the part number for a fuel filter? for jdm zenki ae86, 83 bluetop bigport 16v 4age. black thing with bolt on top on left side of engine bay. i think these are interchangeable with ae92 filter? someone correct me?
if possible does anybody know of any after markets as well for example sold at repco? valvoline? ryco? have no clue. also if there are could you tell me what codes they are?

*EDIT* found the toyota part number thanks jonny rochester
23300-19025
the z361 ryco fuel filter fits (confirmed)
also the valvoline equivalent (it will say it on the side of the box equivalent to ryco z361)
both approximately $40 bux each.

[Robo86]

part number for ae86 kouki intank fuel pump please guyys?

thanks

[parrot]

Look at page 1.......

[harmsup_jai]

Could someone please confirm the part numbers for the head bolts on an ae82 4age?
Is 90910-02120 x5
and 90910-02121 x5 correct?

The other thing I'm unsure about is inlet manifold studs for a bigport, the parts guy gave me 2 numbers and said that one was unavailable, which one is right?
90116-10037
90116-08218 - N/A

Also are these oil filters interchangeable?
90915-YZZE2 and 90915-YZZE1

Thanks Guys

[mello]

looking for maroon plastic rivet part number

for all interior requirements. i need about 20 so hopefully toyota still has some

if not ill settle for black

[parrot]

See page 1....

Burgundy trim clips 90467-07041-52 $1.43 each
(the ones that push in the centre

[Jonny Rochester]

<div class='quotetop'>QUOTE (boh @ Feb 4 2008, 07:06 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=480060)</div>
Also are these oil filters interchangeable?
90915-YZZE2 and 90915-YZZE1[/b]

Yes they are. The E2 is just a bit longer. E1 is for Corolla, E2 is for V6 Camry... sort of. I think the E2 is listed as the 4A-GE one, but it does not matter.

[harmsup_jai]

<div class='quotetop'>QUOTE (Jonny Rochester @ Feb 5 2008, 01:09 AM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=480428)</div>
Yes they are. The E2 is just a bit longer. E1 is for Corolla, E2 is for V6 Camry... sort of. I think the E2 is listed as the 4A-GE one, but it does not matter.[/b]

Thanks for that
it was for my parents 3sge, they usually get an E1, but the parts guy gave me an E2

[mello]

thanks parrot.

now i need to know the part number for rack ends left and right
are they both the same?
and is it 45503-19015

also do the jdm and adm both use the same rack ends?

[Jonny Rochester]

Your number is correct. Same both for left and right, power steer and manual, AE86 and KE70, ADM and JDM as far as I can see.

But these are cheaply available in generic brands at Burson and Repco and you won't need to quote the number.

[mello]

thanks jonny your a legend!

*WARNING* to all gt-apex jdm owners this 45503-19015 is not the right part number. Our cars require shorter rack ends. I found out the hard way after ordering that part LOL oh wells hard lesson learned. What i did was then take off my existing rack ends and bring them into bursons / repco / toyota spare parts and got them to go find a match up. I will see if i can find the packaging and hence source the part number that is required.

[Ru-iki]

Hi Johnny, fantastic thread and very educational.

Just wondering if anyone has part numbers for ae111 valve stem seals and valve guides. I need to replace mine soon.

Thanks everyone.

[Jonny Rochester]

AE111 4A-GE

90913-02092 qty8 valve stem seals, exhaust
90913-02093 qty12 valve stem seals, intake
11122-16040 qty12 intake valve guides, std
11126-16020 qty8 exhaust valve guides, std

oversize 0.05mm valve guides also available.

Send me a PM and I can probably organise any of this stuff.

[shelldrake]

<div class='quotetop'>QUOTE (Benno @ Jan 12 2008, 10:39 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=467554)</div>
with persistance, there is very little that you can't order from toyota ADM or JDM. parts guys don't like ordering from japan cos of the system. like jonny stated before, availability and price can only be give on parts that have already been in australia, "Not on file" only means nobody has ordered one into aus so it's not on the system. the process to get part onto the system involes bouncing E-mail between your dealership, sydney and japan.
which can take upto 3 weeks just to add part to the system so you can get a price and availability, then expect another 3 weeks to get here from the motherland. in the meantime (2 months) if the customer changes thier mind, the dealership is owns a(usually expensive and) unwanted part.

Having said that, a friend of mine has successfully ordered lower and upper sumps with pick-up for a JZX81(to convert supra/soarer sourced 1JZ to front sump) through my dealership.

best bet is to try finding a dealership that deals regularly with imports, be pesistant and offer a deposit on any items "not on file". add peice of mind to your parts guy knowing he won't get stuck with a bunch of JDM huchi parts that he has little chance of reselling.[/b]

truer words never spoken
work at a dealership myself and have got all sorts of shit from japan

[harmsup_jai]

Hey Jonny,
Would you be able to tell me if I have the correct Igniter to suit my ECU
Part numbers are:
ECU: 89661-12080
Igniter: 89620-12300

Any help would be great thanks

Blake

[VBman]

So you can get literally EVERY part from japan? Even from old cars. Or is there some genuine parts you simply can't get anymore?

Take for example, the Rubber seals that seal the rear window of a T18 to the front window.

[Delazy]

in need of the kouki foglight switch + the clip in dash panel....not sure if it comes seperately or together....one would assume together.....anyone got the part number or even if its availabe new?

saw one on yahoo, but didnt think to bid on it now can't find it again lol

[ae86hachiroku]

If anyone has troubles getting parts through Australian Toyota that needs to be from Japan, let me know as I can get anything from Japan, just make it easy on me by supplying the part number.

[TYRAEL]

does anyone know the numbers for the front and rear bumper skins? kouki or zenki???????????

[mello]

Shifter Re-Build Kit

watch ae86 special episode 8 and it will show you how to change these items.

just to let you all know better get in quick if you want to replace the seals in your gearshift.

33548-14010 plastic bush on gear lever *this part is no longer available i will go to another toyota to check it again. as i was intending to replace these essential shifting parts.

33556-14010 plastic bush at seat of gear stick; is still available (this gets worn out to nothing over time)

33556-14020 is the seal beneath the plastic bush seat

check if these are worn is put it into any gear and you shake your gearstick side to side and if there is significant movement you will need to change this.

t3 makes these kits also for $37 US
but concidering at toyota its just as cheap.

[rthy]

any know the difference between the adm and jdm master cylinder/brake bias?
my rears tend to lock up 1st under heavy braking, would it be the piston and springs?

i gave toyota parts (tullamarine) a call and they have 4 master cylinders listed but only 1 type available ($760 new).

[RobertoX]

<div class='quotetop'>QUOTE (Mello @ Apr 18 2008, 08:05 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=519949)</div>
Shifter Re-Build Kit

watch ae86 special episode 8 and it will show you how to change these items.

just to let you all know better get in quick if you want to replace the seals in your gearshift.

33548-14010 plastic bush on gear lever *this part is no longer available i will go to another toyota to check it again. as i was intending to replace these essential shifting parts.

33556-14010 plastic bush at seat of gear stick; is still available (this gets worn out to nothing over time)

33556-14020 is the seal beneath the plastic bush seat

check if these are worn is put it into any gear and you shake your gearstick side to side and if there is significant movement you will need to change this.

t3 makes these kits also for $37 US
but concidering at toyota its just as cheap.[/b]

i have stock of these items, and i have cusco steel lower bushes

it def makes the shifting feel a LOT more direct

[Jonny Rochester]

<div class='quotetop'>QUOTE (rthy @ Apr 21 2008, 02:22 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=520883)</div>
any know the difference between the adm and jdm master cylinder/brake bias?
my rears tend to lock up 1st under heavy braking, would it be the piston and springs?

i gave toyota parts (tullamarine) a call and they have 4 master cylinders listed but only 1 type available ($760 new).[/b]


The difference is not the master cylinder, but the rear brake pressure limiting device down near the chassis rail.

It sounds like you are using drum brakes on a disk brake car? Try using a valve off a ADM car.

Or, buy a adjustable rear brake pressure valve from your local speed shop.

[rthy]

<div class='quotetop'>QUOTE (Jonny Rochester @ Apr 21 2008, 04:15 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=520930)</div>
The difference is not the master cylinder, but the rear brake pressure limiting device down near the chassis rail.

It sounds like you are using drum brakes on a disk brake car? Try using a valve off a ADM car.

Or, buy a adjustable rear brake pressure valve from your local speed shop.[/b]
Thanks,
its a ADM car with JDM rear disk.

anyone got the above part number for the jdm brake pressure limiting device? Might have to give toyota a call again tomorrow.

Cheers,

[parrot]

See here (http://www.toymods.net/forums/showthread.php?t=7420&page=2&highlight=proportioning)

Tom 86 went through all this.

Part number and price noted

[rthy]

THANKS

i spent hours on google :unsure:

:2thumbs:

edit:
<div class='quotetop'>QUOTE </div>
I put in my order for a new Bias valve this morning. Cost me $156 I hope its the right one as I got them to check and double check to make sure that its for a rear disc ae86.

The part numbers is totally different to that american GTS numbers on the net. Here is the real part numbers if anyone else want one
47150 22050.[/b]
worth the read if u have similar issues with rear locking up

gave toyota parts a call today and was quoted $195 from Japan wich takes 3-4weeks.

[choom78]

The JDM brake Master is actually different than the ADM one. e.g. the bolt pattern on an ADM is horizontal and JDM is 45 degrees (from memory). The JDM is black painted and ADM are tarnished but probably rusted :P. Actually the ADM are what i've seen on AE85. I think of real differences, its the same portioning at the master but they are indeed different parts. Maybe the JDM provides a stronger booster as it looks slightly bigger.

Portional valve seems to make more of a difference though than swapping master & booster.

[parrot]

I've pulled apart a JDM (definite) MC and a ADM master and they are identical other than the bolt pattern of the sleeve, vertical 45 degrees (JDM) rather than horizontal (ADM). The USDM ones have the same configuration as ADM although the line out the front goes up at 90 degrees from the end of the MC and the pipe from the reservoir is on the opposite side. Can easily be fitted to ADM though, and very cheap on US ebay. I actually bought a USDM one for $59 to strip out & rebuild my Jap one.

Re boosters, ADM all seem to be Aisin (Gold colour) and JDM Nissin Kogyo (black). Can't comment on the boosters feel/activity as mine has yet to hit the road again.

[Anthony]

Ive seen plenty of JDM cars with the Aisin booster like ours. depends on plant of manufacture I think. Aisin ftw with easy cylinder upgrades.

[RobertoX]

<div class='quotetop'>QUOTE (Anthony @ Apr 22 2008, 01:46 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=521371)</div>
Ive seen plenty of JDM cars with the Aisin booster like ours. depends on plant of manufacture I think. Aisin ftw with easy cylinder upgrades.[/b]

yeah youre right however the one here is a Nissin one

how many plants does toyota have in japan?

[Jonny Rochester]

Lots of Toyota factories in Japan, but about 80% of AE86s were built in the Tahara factory in the Aichi prefecture. About 20% of AE86s were built in the Huzi Azuma factory in the Shizuoka prefecture.

A plant code of A54 or A52 refers to the Tahara factory, and the frame number will start with zero. AE86-0000001 is the first one.

A plant code of M21 means it was built in the Huzi Azuma factory. The frame number will start with 50. eg: AE86-5034562

But this makes no difference. I don't know of any AE86 parts that were affected by what factory they came from.

All AE86 (twincams) in Japan had the Aisin brake booster and matching master cylinder from May 83 to Dec 83. Then from Dec 83 onwards they had the Nissin booster with the angled stud pattern.

The Australian AE86 had the exact same part as the early JDM one, the Aisin.

(AE85 had different part numbers again, never mind that).

[Jonny Rochester]

<div class='quotetop'>QUOTE (Tyrael @ Apr 16 2008, 01:24 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=518790)</div>
does anyone know the numbers for the front and rear bumper skins? kouki or zenki???????????[/b]

Early Levin:
52119-12090 front bumper dark gray
52119-12091 front bumper black
52159-12060 rear bumper dark gray
52159-12061 rear bumper black

Late Levin:
52119-12152 front bumper black
52119-12142 front bumper black
52159-12092 rear bumper black
52159-12062 rear bumper black

Let me know if any of these are left.

[bryzilla]

Does anyone know the part numbers for a rwd jdm 16v bigport 4age distributor cap and rotor button? And if they are the same as anything else? I'm told Aw11 mr2 has the same parts..

thanks :D

[Jonny Rochester]

19101-16040 cap
19102-16040 rotor

The cap is not the same as anything else, except some other RWD 4A-GE in corona/celica/carina.
The rotor is the same as other bigport 4A-GE, plus 1S motors and Y series motors.

I should start charging for this service. Actualy, in Hobart the dealership tell people to ring me. I could probably take all this info down so small businesses can make money selling stuff.

[Nikkojoe]

Ive found the latest bosch caps with PN GD687(from memory or whatever is listed under an ae82 twincam) are actually a rwd jdm bigport cap (found this out after buying 2 and didn't fit my ae82 dizzy). Might be an easy option

[mello]

could i get the part number for rear spring insulator seats. both left and right... gonna need some soon. piece of rubber beneath the rear springs to stop the squeaks and stuff. for ae86

[TYRAEL]

can anyone tell me the part number of the toyota stickers (gt apex,levin ect) on the boot or hatch? and theplastic strip down the side of the doors at the end says levin prob in white or silver

[RobertoX]

^^ nick (admin) makes them

check ebay

[JDM-086]

part number for the universal joint on the steering colomn??

also is the part number for the water pump on the first page for RWD 4age?
are front and rear main seals all the same FWD/RWD/small/bigport (rear differs from small to bigport i assume from the notation?)


just rang toyota with the water pump part number, not only did they not have it listed but they quoted $180 for the water pumps they did have :S

[Golberg]

<div class='quotetop'>QUOTE (JDM-086 @ Jul 22 2008, 03:08 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=564898)</div>
part number for the universal joint on the steering colomn??[/b]Manual Steering: 45209-32010 or 45209-10020
Power Steering: 45209-12040
<div class='quotetop'>QUOTE (JDM-086 @ Jul 22 2008, 03:08 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=564898)</div>
also is the part number for the water pump on the first page for RWD 4age?[/b]RWD 4AGE Water Pump (Seems to come with rear housing, side inlet, and maybe even the top outlet): 16100-19095
<div class='quotetop'>QUOTE (JDM-086 @ Jul 22 2008, 03:08 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=564898)</div>
just rang toyota with the water pump part number, not only did they not have it listed but they quoted $180 for the water pumps they did have :S[/b]You can just use an aftermarket AE71/AE86 4AC variety and file off a corner that's what I've got on my 4AGE.

Oh and is this section only for Johnny to answer in, or is it ok that I answered the questions?
Just though I'd help out.

[Waz]

Dario, got a waterpump on hand. Contact us.

oh and tyrial...like diablo much?

[Kamikaze]

Does anyone know Part No. of the Headlight, Parker, Indicator, Grille for Late levin??
Also the rear taillight + center piece? (ADM & Whiteline)

Thanks

[Ru-iki]

Ive another part number challenge for you mr Rochester.

Just wondering if genuine AE71 or AE86 rack bushes are still available. I have a quaife quick rack with a little up down play Id like to get rid of.

Same part for AE86 and KE70? If they arent available in genuine parts then does anyone know who does them?

Much appreciated EPC champs.

[Jonny Rochester]

Ru-iki:

45522-10021 bush, steering rack (not for power steering) Same as AE71, KE70.

I have bought one in the last few years, so still availalbe. About $40.

You want this single bush. It presses into the left side of the rack housing. On the right side of the rack, the rack/pinion contact is spring loaded. The pinion is suported by two ball bearing races, and the preload is adjustable with a big shifter or SST or something.

[84ae86coupe]

Not really related to hachis but does anyone know the part number for the 4 coils that sit on top of the gen4 3sgte from a 2002 caldina?

Preston

[Ru-iki]

<div class='quotetop'>QUOTE (Jonny Rochester @ Aug 8 2008, 09:29 AM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=572852)</div>
Ru-iki:

45522-10021 bush, steering rack (not for power steering) Same as AE71, KE70.

I have bought one in the last few years, so still availalbe. About $40.

You want this single bush. It presses into the left side of the rack housing. On the right side of the rack, the rack/pinion contact is spring loaded. The pinion is suported by two ball bearing races, and the preload is adjustable with a big shifter or SST or something.[/b]


Thanks for your insight Jonny. Its got a vertical knock in the lhs of the rack so it sounds like exactly what I need.

:2thumbs:

[Anthony]

Last couple of times Ive tried to get one they've been NLA Matt. Which sucks because they all have that fault. I had to have one made from soft metal.

[Jonny Rochester]

<div class='quotetop'>QUOTE (84ae86coupe @ Aug 8 2008, 11:31 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=573165)</div>
Not really related to hachis but does anyone know the part number for the 4 coils that sit on top of the gen4 3sgte from a 2002 caldina?

Preston[/b]


90919-02227 ignition coils

This is the number for the 4 coil-on-plug ignition coils, for the ST215W Caldina with 3S-GTE. Not sure if thats what your after.

[84ae86coupe]

Nah jonny that's exactly what I was after.

Cheers for that mate.

[eightsixboy]

<div class='quotetop'>QUOTE (Ru-iki @ Aug 9 2008, 12:04 AM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=573176)</div>
Thanks for your insight Jonny. Its got a vertical knock in the lhs of the rack so it sounds like exactly what I need.

:2thumbs:[/b]

I too have a knock in the lhs of my rack, also when i finish a corner the steering wont centre properly, it'll pull slightly to the direction you have just turned untill you drive straight for maybe 50-100m and its ok again, i'm assuming the bush is just worn to the max. I have like 3 degrees of castor so wont be castor related.

Also i wonder if you can get window trims?

And has anyone tried to order these?
81210-12030 fog lamp, RH late model levin apex
81220-12020 fog lamp, LH late model levin apex

[TYRAEL]

<div class='quotetop'>QUOTE (was @ Jul 22 2008, 08:41 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=565100)</div>
Dario, got a waterpump on hand. Contact us.

oh and tyrial...like diablo much?[/b]


yeah like all games pretty cool! can't wait for the next should be kick arse! :2thumbs:

[RobertoX]

<div class='quotetop'>QUOTE (Anthony @ Aug 9 2008, 09:53 AM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=573232)</div>
Last couple of times Ive tried to get one they've been NLA Matt. Which sucks because they all have that fault. I had to have one made from soft metal.[/b]

theyre def still available

pm me if you still need one

[GAKI86]

greetings johnny, this may be a bit off topic, is it true that toyota still produce radiator supports? eg metal piece supporting your headlights and radiator, just wondering.. needs verification mat, cheers

[RobertoX]

^ yes

[bennyb1234]

I need new hydrolic tensioner and tensioner pulley. Does anybody knows what part # interchange w/ these parts for 20v BT. Thanks

[Leigh]

Would anyone have part numbers for the Brake Piston thing on a t series drum brake (early model no sway bar mounts Zenki I think)
I've just fitted her up to my car and brake fluid went everwhere
can you buy a new set up for it and is there a part number I can quote or will I have to get it recoed?

Leigh

[works510]

Any parts store will have rear wheel cylinders for t18.

[Leigh]

<div class='quotetop'>QUOTE (works510 @ Aug 27 2008, 06:25 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=580566)</div>
Any parts store will have rear wheel cylinders for t18.[/b]


sweet she's all good now except the bearings now sound like they are gone!!!
Any one got parts number for the rear axle bearing for T18 drum rear end Zenzi?

[ghetto ke]

Kouki Windscreen Moldings

Part No..............Est Cost: Ex Japan 4-5 WEEKS
75531-12271......$80.00 (Top molding)
75535-12130......$227.00 (Lower Molding)
75533-12200......$48.00 (RHS molding)
75534-12130......$48.00 (LHS molding)
62383-12010......$86.00 (Weatherstrips) This cost is for both LHS and RHS. (Part # superceeds 62384-12010)

*Note kouki windscreen sits 15mm lower than zenki/ADM so side and lower moldings are slightly different!

[RobertoX]

wonder why they changed??

[ghetto ke]

I think he means why the windscreen is different early and late. who knows? it's hardly noticable unless you have the two next to each other to compare

[RobertoX]

<div class='quotetop'>QUOTE (Waz @ Sep 10 2008, 10:02 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=586541)</div>
You trying to be smart dave?

Im taking it that the prices in 741's post changed.

Everyone wants to make some cash, and still be cheaper than ajps. Most peoples goal :P[/b]

no i was curious as to why toyota would bother changing the size of the glass

as for the other bit, i hope its working out for you

[DAMO46]

whats the actual, outer door mouldings part number.

and the back, side windows, the plastic bits that look like a triangle

[RolandGTV85]

<div class='quotetop'>QUOTE (741 @ Sep 10 2008, 10:42 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=586545)</div>
I think he means why the windscreen is different early and late. who knows? it's hardly noticable unless you have the two next to each other to compare[/b]


I need to get ADM mouldings cos my Trueno window was replace with and ADM one.... all mouldings are still jdm and they don't line up correctly..


Anyone know ADM part numbers for these mouldings?