Flubber
9th June 2007, 09:29 PM
Hi guys thought it bout time to add the info on my ride.. it's taken me 4mnths to get it to were it is today.. and I'm soo glad I did it... the best fun on wheels... ha
Specs are as follows..
<be>KE70</be>
<be>Body</be>
Flared front guards.
<be>Brakes</be>
S13 Sr20de front brakes
<be>Suspension</be>
S13 front end
ISC coilovers
AE86 Cusco camber tops
New bushes and ball joints whole front end.
<be>Engine</be>
SR20DE+t
3 inch home made dump pipe
3 inch home made exhaust system
Rear 2.5inch "box-mini dumper".
Front mount cooler
Custom home made intercooler piping
VL fuel pump
Facet pre-pump
Datsport surge tank
K&and Pod filter
Garrett 2535 turbo
Re-mapped ECU
4 map hand controller
Re-located battery
Camery rad
Twin thermo fans
Braided home made clutch line
<be>Driveline</be>
Extreme Heavy duty clutch
Custom made heavy duty pivot bolt
Standard Diff locked.
Custom tailshaft
Solid G/box mount
<be>Interior</be>
Aftermarket gearknob
Water Oil temp and pressure guages.
Blitz Boost guage
Trans tunnel cover.
Fire Extinguisher
<be>Rolling Stock:</be>
16x8 +25 Work Meshies / Volk Meshies
Car was dyno'd and made 160rwKw at 8psi.
Re-dyno'd and made 185rwKw at 11psi..
Pictures:
Pics are a bit crap.. will work on getting some better ones soon..
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/147021.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/147022.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/147023.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/147024.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/147025.jpg
Specs are as follows..
<be>KE70</be>
<be>Body</be>
Flared front guards.
<be>Brakes</be>
S13 Sr20de front brakes
<be>Suspension</be>
S13 front end
ISC coilovers
AE86 Cusco camber tops
New bushes and ball joints whole front end.
<be>Engine</be>
SR20DE+t
3 inch home made dump pipe
3 inch home made exhaust system
Rear 2.5inch "box-mini dumper".
Front mount cooler
Custom home made intercooler piping
VL fuel pump
Facet pre-pump
Datsport surge tank
K&and Pod filter
Garrett 2535 turbo
Re-mapped ECU
4 map hand controller
Re-located battery
Camery rad
Twin thermo fans
Braided home made clutch line
<be>Driveline</be>
Extreme Heavy duty clutch
Custom made heavy duty pivot bolt
Standard Diff locked.
Custom tailshaft
Solid G/box mount
<be>Interior</be>
Aftermarket gearknob
Water Oil temp and pressure guages.
Blitz Boost guage
Trans tunnel cover.
Fire Extinguisher
<be>Rolling Stock:</be>
16x8 +25 Work Meshies / Volk Meshies
Car was dyno'd and made 160rwKw at 8psi.
Re-dyno'd and made 185rwKw at 11psi..
Pictures:
Pics are a bit crap.. will work on getting some better ones soon..
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/147021.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/147022.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/147023.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/147024.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/147025.jpg