PDA

View Full Version : breno's 70's



Pages : [1] 2

breno
15th June 2007, 09:56 PM
I got anouther ke. Wasnt planning on getting anouther one i was just saving up for a s13, and got tired of driving around my parents cars. then i noticed this car just sitting around the corner from my place and offerd them $500 for it.
Its your usual ke, and i think its a pretty decent buy for $500 everything mechanical is sweet, just some rust which i dont give a crap about.
Im just going to make it phat and low, and old school. Not going to be a drift car just a daily cruiser blah blah.
here's a crappy phone picture.

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/148230.jpg

obey wan boenny
15th June 2007, 09:57 PM
nice as, can't wait to see it finished.

Gilly
15th June 2007, 10:18 PM
beige yummmmmm

breno
15th June 2007, 10:35 PM
mmmm creamy beige http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
hopefully i will get a rwc soon enough so i can starting doing shit to it, im so tempted just to cut the springs a shitload now http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
once i finally do get a rwc though, it wont take long to get everything up to standards...

slide86
16th June 2007, 11:44 AM
hahaha cool brendan
whats the plans though?

breno
17th June 2007, 01:40 AM
Took it rallying a heap today, and wow it understeers so much.
Pretty pathetic there are other photos but the amount of understeer is just embarrasing also there is a video.

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/148626.jpg

Stuck
17th June 2007, 01:16 PM
Cant be that bad http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

Nice pick up. Maybe I should go around and offer people money for their ketos. Good idea.

Gl with this one http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

breno
17th June 2007, 04:33 PM
Made a lip and cleaned it up more today.

http://img135.imageshack.us/img135/8082/webke1ti1.jpg

http://img157.imageshack.us/img157/3872/webke2mb2.jpg

slide86
17th June 2007, 05:50 PM
lol lip looks abit whack.

Bustin_86
17th June 2007, 07:39 PM
Lip looks JAYDEEEMMM yo!

Pics of the lip?

Good stuff on the 70 by the way, get her grindin', bolt some fats on and some kick ups will make it heaps tight http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif

Dish
17th June 2007, 09:34 PM
Omg full sik hubcaps broo.

Haha, looks sweet man. If I know you, this should be cranking soon.

breno
23rd June 2007, 12:55 PM
almost there...
Still waiting on a rwc and then it will be slammed.


http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/149885.jpg

obey wan boenny
23rd June 2007, 01:00 PM
sweet as, I love the look of your car

breno
24th June 2007, 09:11 PM
After about 5mins of thinking i have come to the conclusion that...
Im going to gze it, and drift it.
Im always complaining to my friends when we go sliding that i wish i had a better car, and i have the chance to make one so im gonna do it.

MountainRunner
24th June 2007, 09:14 PM
its like the reborn of ur old 1 so phat (y)

breno
27th June 2007, 05:13 PM
slammed much?

I will put the ma's on the back once i have smaller tyres. hopefully tomarrow.

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/150098.jpg

http://img95.imageshack.us/img95/6352/lownewae6.jpg

breno
28th June 2007, 12:22 AM
It looks high and crappy in photos.
Also got some 175/65 freebies which will go on the other ma's tomarrow so it will look decent :)

http://img165.imageshack.us/img165/4936/siklowvl0.jpg

obey wan boenny
28th June 2007, 12:38 AM
haha, whats this about a 1JZ? lol car's looking phat as.

Andrew
28th June 2007, 11:54 PM
I was thinking yesterday why there isn't more 1J stuff going on with KE's and AE's, then I remembered understeer's a bitch.

Nice to see you got another one Breno. Keep at it.

breno
29th June 2007, 10:52 PM
lol no 1j, just to get attention :lol:
it sucks how it looks high in photos, the last photo is cool but out of focus which sucks.
But it kinda shows u how low it really is.

http://img146.imageshack.us/img146/8657/dscf5964cj6.jpg

http://img87.imageshack.us/img87/6351/dscf5965dd1.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/150246.jpg

http://img297.imageshack.us/img297/9692/dscf5984bi2.jpg

kewagon
30th June 2007, 10:52 AM
this car looks awsome, i like the colour aswell, whaqt sus are you running?? is the lip still no in those last pics?

breno
30th June 2007, 02:02 PM
cut springs all round for now, with seirra shocks in the back.
I was driving home yesterday along the highway, and the bracekets i made were sorta dodgy.
So doing about 120+ and little aluminium brackets dont really work, i ended up dragging it along for a few hundred metres it was just held on by one pop rivit. Will be back on soon though.

breno
5th July 2007, 04:38 PM
I got bored today :crazy:
Nice exhaust. haha. its pretty fucking funny driving it around.
Im going to weld on 2 2 1/2 pipes sticking like 1m out the back when i can be botherd.
Oh and a rx7 oilcooler i got of a friend, still havnt mounted it yet :P

http://img478.imageshack.us/img478/6308/funny001xz1.jpg (http://imageshack.us)

http://img388.imageshack.us/img388/7264/funny002ob6.jpg (http://imageshack.us)

samoo
5th July 2007, 04:46 PM
your car is looking mad as ........keep it up

breno
6th July 2007, 06:53 PM
here is a video of what it sounds like.
Then imagen that in real life but about 20million x's louder haha.

http://www.youtube.com/watch?v=dqMlzRDJh5Y

Bustin_86
6th July 2007, 06:55 PM
Well on the way bro!

Actually fatest keto in all of bundy!

kewagon
6th July 2007, 09:14 PM
thats the way, same as i run on my wagon, makes the 4k sound like a monster, pretty funny to listen too though, all noise and no go, top stuff man, keep it up

breno
7th July 2007, 01:09 PM
hmm yes or no to the oilcooler?
imagen that but with pipes going into the grill?

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/150550.jpg (http://imageshack.us)

EMD-KE70
7th July 2007, 01:11 PM
Yes
People will think you have a sik interoolahs braz
cool car btw.....is it turbo?

Bustin_86
7th July 2007, 01:45 PM
Good to see you took my advice and got into it you lazy pint!

Looks way to much like a intercooler at the moment though dude...

Maybe mount it lower and on a slight angle?

Mad-Bosoooo stylez.

deleta
7th July 2007, 03:06 PM
lol it looks madd but yah maby lower like bustin_86 said......... looking the goods tho

Bustin_86
7th July 2007, 04:10 PM
http://img382.imageshack.us/img382/6117/siklowvl0vd2.jpg

Shit chop but i had limited resources, hope that helps ya understand what i mean Brother.

kewagon
7th July 2007, 06:29 PM
i reckon it looks good weere it is but jsut needs to go kinda back a bit behind the bumper a little, kinda liek were bustin put it but straight, looking awsome thouhg man, and get that lip back on lol

breno
8th July 2007, 06:53 PM
the real deal...
i need to put the lip back on!

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/150625.jpg (http://imageshack.us)

slide86
8th July 2007, 09:24 PM
bahaha thats ghetto
i love it :D

obey wan boenny
8th July 2007, 09:30 PM
holy faark!! that's phucking phat!! boso to the max! :blink: :lol:

Bustin_86
8th July 2007, 10:01 PM
zing much love!

looks hhaawwttt

breno
11th July 2007, 11:14 PM
http://www.youtube.com/watch?v=sb2VYr4um4E

stupid 4k keept cutting out half way through a lap for unknown reasons so that was gay.
oh and the hidious amounts of understeer!

Bustin_86
11th July 2007, 11:40 PM
Tight slides slugger, actually loud!

Shizzlen.

Bustin_86
28th July 2007, 07:28 PM
Hmmm... I hear a certain BOZO ke70 will finally have some rims to fit the style...

MountainRunner
28th July 2007, 07:38 PM
give it away much so breno's the 1 that will have de centrelines

Bustin_86
28th July 2007, 08:27 PM
If you were to ask me on a monday....

breno
29th July 2007, 02:37 AM
drunk me posting :P
mebbbye....


talking to a friend rtonight at the club whilst drink. 155's are the go :P
Also new engine soon, also new sus soon....

Felix
29th July 2007, 02:39 AM
drinking is good, and so are wide wheels

that is my point exactly

Gilly
29th July 2007, 03:05 PM
fat 13's FTW

ae71
29th July 2007, 03:45 PM
go 165's, 155s look wack on 13x7's. the 155 looks out of shape not streched, 165 would look tough especaly if you can get it in under 80 profile :P

EMD-KE70
30th July 2007, 01:05 AM
I have 165/60s on a 13x6" they look pretty fat...very stretched surprisingly.

breno
1st August 2007, 11:21 PM
Bored. 2 new photos.
More stuff should be happening soon

http://img402.imageshack.us/img402/7204/newphoto3wa7.jpg

http://img111.imageshack.us/img111/6628/newphoto2xx8.jpg

samoo
1st August 2007, 11:33 PM
pimpin styles wheres the cooler at ? :P

hilton
2nd August 2007, 12:13 AM
ur in bundaburg ey? is them photo's at bagara it hink it is? on the water therre??

breno
2nd August 2007, 12:25 AM
auctually on the hummock, the only place near bundy that isnt flat :P
but yeah its like 5mins away from the beach.

ae71
2nd August 2007, 01:11 PM
auctually on the hummock, the only place near bundy that isnt flat :P
but yeah its like 5mins away from the beach.[/b]

damn... rust :P

i live up in the hills, half an hour away from the sea...

Felix
2nd August 2007, 01:46 PM
<{POST_SNAPBACK}> (index.php?act=findpost&pid=382857)
auctually on the hummock, the only place near bundy that isnt flat :P
but yeah its like 5mins away from the beach.[/b]

damn... rust :P

i live up in the hills, half an hour away from the sea...
[/b]


i live on the water...

nice car, looking forward to seeing it on the sept cruise

breno
7th August 2007, 02:27 PM
Finally had a day off work today, so i thought i would do some work on the car.
Cut the bumper and mounted the oilcooler on semi good, one side is still attached to the bumper which is held on by 5 zipties :P

Hurry up and send the centrelines Justin!!!! :P

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152366.jpg

Bustin_86
7th August 2007, 06:51 PM
Hurry up and pay Brendan :lol:

obey wan boenny
7th August 2007, 06:59 PM
sweet as :lol: , go the zip ties once again. One of Gilly's fat lips should give it an authentic boso look :2thumbs:

ae71
7th August 2007, 07:15 PM
Finally had a day off work today, so i thought i would do some work on the car.
Cut the bumper and mounted the oilcooler on semi good, one side is still attached to the bumper which is held on by 5 zipties :P

Hurry up and send the centrelines Justin!!!! :P[/b]

dude, im getting sick of looking at these cause i know they wont be going on my car :P

i want to send them to you man asap, get some real rolling stock... pimpin aint easy :lol:

Bustin_86
7th August 2007, 07:18 PM
Pimping is hell easy with mad Kyouteki hookups!

BouNCE-86
7th August 2007, 07:20 PM
Breno, hopefully when i get my new car i will come up to bundy and meet up with you guys and we can cause some havik...

JOsh aka phat cressida

samoo
7th August 2007, 07:22 PM
looking sick ...... will the oil cooler be defectable ???

breno
7th August 2007, 07:26 PM
proberly, but i dont think thats what the cops will be worry about in a few weeks :P

Sounds good Josh, what new car are you getting?
Hopefully all my plans will be done by the cruise/meetup in September.

Bustin_86
7th August 2007, 07:37 PM
Yeah they will be worried about the barely concealed 7 inch wide -30 rims, the -10 degrees of camber at the front and the extra 100mm or so of track at the front and the extra 50mm at the rear... oh and the fact that the guards are fatter than a jenny craig member and they STILL dont cover stretched rubber.

Then there will be the hardcore bozo hair-lighting exhaust and continual crab walking manevours :P

breno
7th August 2007, 07:55 PM
Yeah they will be worried about the barely concealed 7 inch wide -30 rims, the -10 degrees of camber at the front and the extra 100mm or so of track at the front and the extra 50mm at the rear... oh and the fact that the guards are fatter than a jenny craig member and they STILL dont cover stretched rubber.

Then there will be the hardcore bozo hair-lighting exhaust and continual crab walking manevours :P[/b]

Hahah, sounds outrageous. Buts that what is happening!

Bustin_86
7th August 2007, 08:05 PM
And of course, obscured vision from rear window due to hhuuggee Kyouteki sticker :P

This car is going to be crazy, in the best way :D

breno
9th August 2007, 05:51 PM
shot of whats to come.

note* not my car, i dont have flaired guards ;)

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152492.jpg

Bustin_86
9th August 2007, 06:02 PM
Will stick out a bit more than that on a stock ke70, and remember that the suspension is at full stroke there, so when they are sitting up closer to the guard they will look a lot phatter again ;)

Gonna be properrrrr.

Gilly
9th August 2007, 06:48 PM
that will look fat as

obese 13's are where its at

ae71
9th August 2007, 09:33 PM
shot of whats to come.

note* not my car, i dont have flaired guards ;)

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152492.jpg[/b]



Will stick out a bit more than that on a stock ke70, and remember that the suspension is at full stroke there, so when they are sitting up closer to the guard they will look a lot phatter again ;)

Gonna be properrrrr.[/b]

yeah the other wheel was on the ground so if the suspension was level it would be further out...

breno
12th August 2007, 10:06 PM
impulse buy :blink:
went down to goldy on the weekend, turns out banzai was right accross the road from where we were staying..

ohhh. also decided on my engine of choice. keeping it on the down low though :lol:

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152720.jpg

ae71
12th August 2007, 10:16 PM
what the condition of the wheel like? looks like there are a few little nicks on it..?

breno
12th August 2007, 10:42 PM
its auctually reeally good.
no rips, tears or anything. all stitching is 100%.
U cant even see those marks in real life :P blame it on the flash haha

Konakid
13th August 2007, 12:15 AM
Pimping is hell easy with mad Kyouteki hookups![/b]

dude they are 13 inch brake boilers, not pimping

but the rest of the car is cool

ashie
13th August 2007, 09:08 AM
eagerly awaiting pics of the centerlines on it!

Gilly
13th August 2007, 11:13 AM
likewise

13's are cool as

Gilly will be reppin some obese 13's soon

cool to meet you in person yesterday at QR man, keto plan sounds sik ;)

Bustin_86
13th August 2007, 12:33 PM
Pfft, your just jealous Henry :P Nah i know what your saying man, but some people like centrelines lol.

-34 anything rocks my socks.

Rims should be at Brenooooo's on thur or so.

breno
13th August 2007, 06:58 PM
As soon as i get them tyres are getting fitted.
Just going to go 165/65's for the mo.

Suspension should be in soon aswell. Hoping everything will be done before the meetup/cruise thing besides the engine.

Dave
13th August 2007, 09:49 PM
that is a FUCK load of dish ... police will love you .... police sponsorship ? lol

breno
13th August 2007, 10:07 PM
i thought this was supposed to be a boso car???[/b]

It was going too.
But ive already had a run in with the 5.0.
And i really cant afford to loose my license, so it will just be boso influenced from now on :rolleyes:

I may make up some extensions for the exhaust just to bolt on when i feel like it.

Bustin_86
14th August 2007, 12:39 PM
When you get the rims fool post up a pic of the back of them :P

breno
15th August 2007, 03:37 PM
Hmmmmm what can these be?????? Hmm surely not? its only been a few days!!

http://img253.imageshack.us/img253/5558/wheels001mj1.jpg

WOOOORRRDD!

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152944.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152945.jpg

Test Fit

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152946.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152947.jpg

Madgarbage
15th August 2007, 03:40 PM
fuk yea (y)

breno
15th August 2007, 04:29 PM
that was quick...
Im an idiot though, i only just realised i fitted up one of my 165/70's, not a 165/65.
It looks wak. Goof fitment though!!


http://img253.imageshack.us/img253/9003/wheels010wu3.jpg

http://img253.imageshack.us/img253/932/wheels008dm3.jpg

BouNCE-86
15th August 2007, 04:35 PM
mAD sICK - Needs IRS :P

breno
15th August 2007, 04:37 PM
Yeah, i really think im gonna go a 165/60 or even a 165/55 now. sidewall iss waaaaaaaaaaaayyyyyyyyyyy too big.

Gilly
15th August 2007, 06:30 PM
looks the goods Breno

fitment is the goods

i like to say goods

xsoarerx
15th August 2007, 06:43 PM
who needs IRS... we can just bend your axels for alsome neg. rear camber :P

thoes wheels are sweet as! wack tires tho :blink:

E7
15th August 2007, 06:45 PM
great offset mate! :D

DRFTPG
15th August 2007, 07:43 PM
they are gilly spec rims haha look good with a smaller side wall tyre

Bustin_86
15th August 2007, 07:47 PM
Shizzlen, lol :D

Looks brilliant dude.

Rims sit perfectly on those flared guards! Just a little out of the lip, exactly how they should be.

Gilly spec? Please! They are 100% full of Kyouteki Love ;)

slidn70
15th August 2007, 08:13 PM
Yep lower profile will look trick!

hilton
15th August 2007, 09:18 PM
heeeeels yea dude! y do your 165's look not as stretch as my 165's,. must be the sidewall coz mine are 65's..


looooks the goods man

E7
15th August 2007, 09:22 PM
how does cooling for the brakes go with those rims?

anyone?

v-tec
15th August 2007, 11:01 PM
I want to touch

I use mk1's on my car, pretty much the same thing. Never had brake fade ever, even going down hills or a hot track day...

obey wan boenny
15th August 2007, 11:17 PM
FUNK YEH!!!!

ashie
15th August 2007, 11:26 PM
how does cooling for the brakes go with those rims?

anyone?[/b]
there that wide that they dont cover the hubs or brakes :P

deleta
15th August 2007, 11:28 PM
look sick as man :2thumbs:

anastasios
15th August 2007, 11:29 PM
i believe that the steel surface would provide a larger area for heat dissipation, thats my theory lol but i am biased i do own fat ass mk1s, yea get some skinnier tyres on there, and i was reading about bending diffs on an ipra site.. it is done

breno
15th August 2007, 11:39 PM
Looks like im gonna have to auctually buy tyres for once :blink:
Haha, but it looks like i will most likely be running 165/60's on them for now.
I would run 55's but they are too rare, espically in bundy!

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/153002.jpg

E7
15th August 2007, 11:50 PM
make it skinner :P

looks hot as man!

JoshKE
16th August 2007, 01:01 AM
Tough as f--k dude, looks great.

samoo
16th August 2007, 10:16 AM
looks really sick :D boso styling

dr1ft-pig
16th August 2007, 01:01 PM
looks good man, hope to see it on the cruise

breno
16th August 2007, 03:58 PM
Damn it sucks being broke :rolleyes:
Just orderd some 165/55R13 Nankang's which will be on by Saturday. Only 2 though, all i can afford at the mo :(
I also cleaned up all the wheels today, all very pimp now.

Heres a list off all the stuf which im aiming to have all in by the big meetup in September.

PS Arms - Kyouteki
Hubs & Brakes -Medwin
TRD 8kg springs - Banzai
Ford springs - ??
Sigma control arms - Kyouteki
Madhouse lip (hopefully be done by theen)
2 more 165/55
bosskit - ??
exhaust - myself..
lower...
i think thats about it.. for now..

looks like im gonna be broke for months to come aswell :P

Gilly
16th August 2007, 04:33 PM
bosskit= Gilly :P

xsoarerx
16th August 2007, 04:43 PM
areo lip = gilly :P :D

whats the plans for the exhaust? star shape? detachable? or just sticking stright out the back?

stefan
16th August 2007, 04:50 PM
185 55 R14 IS WINN ZING GET EM NANGKANG TYRES MAKE EM!

breno
16th August 2007, 04:56 PM
Exhaust is either gonna be one of these styles, i might go half way in between both, twinpipes, and then detachable V twin tips :rolleyes:

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/153024.jpg

OR

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/122354.jpg

xsoarerx
16th August 2007, 05:31 PM
i say go the 2nd type like this

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/153029.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/153030.jpg

so you can take them on and off, nice and neet twin pip jsut extending slightly past your rear bar then plug these on for instant yankee style exhaust tips :) me and z-style are making a set or two in a few weeks.

RobertoX
16th August 2007, 06:31 PM
185 55 R14 IS WINN ZING GET EM NANGKANG TYRES MAKE EM![/b]

^ they are 13s dude




boss kit - AJPS long type


i have ps arms if you are still in need $180pr incl shipping

breno
17th August 2007, 01:45 PM
Because i can...

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/153041.jpg

http://img518.imageshack.us/img518/7536/wheels017yw2.jpg

Bustin_86
17th August 2007, 01:52 PM
Stuffed guards

breno
18th August 2007, 10:21 AM
yay for 165/55R13's!!!!!! Totallly rad!
Looks like 1000x fatter in real life!

http://img135.imageshack.us/img135/8460/tyres001yx3.jpg

http://img340.imageshack.us/img340/9950/tyres002ai3.jpg

57ompa
18th August 2007, 12:04 PM
I will have to keep an eye out for this thing next weekend.
Going to visit my cousin, he lives just outta bundy on 180 acres. taking my bikes up to ride

Jae

Bustin_86
18th August 2007, 12:27 PM
Looks nice and tight on the rims man :D

Now get more tyres on and lower the fuckin thing!

breno
18th August 2007, 02:13 PM
dont know how much lower i will be able to go, since the rolling diamater of the wheels is massivly small its pretty much 50mm off the ground as is!!!

breno
18th August 2007, 02:28 PM
http://img249.imageshack.us/img249/4508/tyres004cm4.jpg

howee
18th August 2007, 04:18 PM
Hi5 looks hoot Breno :P

I like it

GO LOWER ahaha jjk it's a good height

Now get all 4 on

howee

MountainRunner
18th August 2007, 04:29 PM
SO GOOD

Tires look might fine

cheers for the unbaningz

BouNCE-86
18th August 2007, 10:05 PM
seen this phat little bitch in person today

looks so much better up close

keep up the good work

ae71
19th August 2007, 01:41 PM
hhmm maybe when you get stiffer susy you can go a little lower. not quite low enough, you can see the tyres tread easly. i like it so most of the tyre is covered.

dont want to go ripping that x-member out tho:P

breno
19th August 2007, 01:51 PM
it will be lower, just not too much lower as its still my daily :P
all wheels will be on tuesday, nardi on tomarrow. get my hubs and brakes sometime this week.
It's all coming together!!

ae71
19th August 2007, 02:12 PM
hell yes, will look so sick, it dosent even mater it still has a 4k :D :D :D

lewa
19th August 2007, 04:27 PM
car looks tough as!
gotta be happy, but i do agree a little lower and it'll look even better!
also thanks for the info about the tyres!
Peace,
Johnny

breno
20th August 2007, 10:45 AM
Just noticed somethign funny. I can go lower physically, but then i wouldnt even be able to get up my driveway!!

Crossmember > Ground

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/153156.jpg

xsoarerx
20th August 2007, 10:50 AM
HOLY SHMOLY!!! :blink: i think you should get a lighter and place it under the crossmember because thats about how high it is.

very very nice work :2thumbs:

how much did thoes tires set you back?

breno
20th August 2007, 10:58 AM
Umm yeah, lighter doesnt fit under :blink:
Tyres were $90, they are Nankangs. Going to go order 2 more now so the full set will be on tomarrow :greenbounce:

BouNCE-86
20th August 2007, 11:13 AM
Cant wait to see this :P

Bustin_86
20th August 2007, 12:14 PM
As i said on msn... shit yeah!

stefan
20th August 2007, 12:24 PM
looking sik low down win

keto pimpn

ae71
20th August 2007, 07:52 PM
want to see this that cross member on flat driveway or something.. the grass is almost touching :D

breno
21st August 2007, 01:25 PM
Wheels ON

http://img256.imageshack.us/img256/3786/fullfewlp6.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/153222.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/153223.jpg

Bustin_86
21st August 2007, 01:27 PM
Pants eruption

Gilly
21st August 2007, 01:36 PM
x2

:lol:

Breno get some beige touch up piant and spray the black sills. it will look lower :P

tat first pic is horny as dude

JoshKE
21st August 2007, 01:43 PM
Fuck yeah. Thats how its done boys.

deleta
21st August 2007, 01:48 PM
love this car man, got all the ingredients of a sexy sexy car, cause thats what it is. wish my car was as pimp tastic :2thumbs:

ae71
21st August 2007, 02:03 PM
love this car man, got all the ingredients of a sexy sexy car, cause thats what it is. wish my car was as pimp tastic :2thumbs:[/b]

but the thing is it hasnt had lots of bling parts/money thrown at it, its just go the 2 key ingredence, slammed on its guts, fat wheels oh and hand flaries....

deleta
21st August 2007, 02:12 PM
yah soo tru

BouNCE-86
21st August 2007, 02:17 PM
Mad Stuff

Guna come up and hump this car on the weekend... SERIOUS! :P

breno
21st August 2007, 02:18 PM
thanks for the kind words guys.
front needs more camber and a equal height :P

Bustin_86
21st August 2007, 02:23 PM
Camber is sorted :P

Chop time man!

Bustin_86
21st August 2007, 02:44 PM
Sheeeeet chop, apologies.

Breno, post up your background :P

MountainRunner
21st August 2007, 04:54 PM
SO FUCKING HOT MAN (y)

starni_boy
21st August 2007, 06:27 PM
hahahahaha that photoshop looks so rediculous. doh! :)

i guess it beats my attempts at photo editing though.

stefan
21st August 2007, 06:36 PM
sigma control, arms lol

looking the way all ketos should look well done i love it bozo zorst time bigger is better

hilton
21st August 2007, 07:53 PM
fhuck yeh!! looks sick man

add a little sigma lca and a madhouse lip and you have the fukin boso'est ke in aus!

Bustin_86
21st August 2007, 08:22 PM
Sigma arms are on the way... several other boso ideas are also in the mix i do believe :D

breno
21st August 2007, 08:43 PM
really??
seriously, photos dont do this justice.
I cant wait for this cruise/meet up thing to show it off :P

BouNCE-86
21st August 2007, 08:48 PM
Agreed with owner, this thing is off tap in person...

breno
22nd August 2007, 07:28 PM
Nardi is on, love the position where it sits thanks to the 90mm bosskit from Gilly!

http://img300.imageshack.us/img300/3962/nardics8.jpg

hilton
22nd August 2007, 07:36 PM
seriously, photos dont do this justice.
I cant wait for this cruise/meet up thing to show it off :P[/b]
i know how you feel, my car looks so gay in pics i recon.

Course_Out
22nd August 2007, 10:21 PM
Oh man, that's awesome!

Gilly
22nd August 2007, 10:25 PM
Nardi is on, love the position where it sits thanks to the 90mm bosskit from Gilly!

http://img300.imageshack.us/img300/3962/nardics8.jpg[/b]

phew glad it showed today!!

never using that post office again thats 3 times their "express" service has taken 2 days :(

The Enthusiast
22nd August 2007, 10:37 PM
Thats a hell of alot of camber :P

Bustin_86
22nd August 2007, 11:24 PM
Thats a hell of alot of camber tongue.gif[/b]

Or as we like to call it, "porn" :lol:

E7
23rd August 2007, 10:49 AM
lol at camber

wheels look great man ! keep it up

sly1300
23rd August 2007, 02:15 PM
nice work. colour and wheels make a sweet combo.
:P two thumbs up

breno
25th August 2007, 12:55 PM
I flaired one of my guards today because the cops were hassling me.
But damn i hate it, i reckon the standard guards look alot better so im just gonna get anouther standard one.

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/153406.jpg

Dish
25th August 2007, 01:12 PM
Fuck yeah, looks hot breno.

Can't wait to see it in the flesh. I want wider wheels :(

Bustin_86
25th August 2007, 03:29 PM
Atlas spec rear guards look sick, upturned lip is sexy.

Need some new parts for the beast mannn

BouNCE-86
25th August 2007, 03:32 PM
Hottest KE around... ^_^

breno
27th August 2007, 05:05 PM
mail came today!
Massive thanks to medwin for the hubs and brakes! I had no idea they were cross drilled so that was a nice suprise :2thumbs:
Oh and got something else...

http://img300.imageshack.us/img300/8416/new019mm5.jpg

http://img300.imageshack.us/img300/2205/new020mo5.jpg

deleta
27th August 2007, 05:07 PM
hey thats sick MMM hope i get a sticker like that

86xxx
27th August 2007, 05:26 PM
That pic doesnt do the parts justice man, they werent in too bad condition i hope. Did they reach you with the boxes intact?!? I used a whole roll of race tape on them!!! Yeah sorry about the drilled rotors, i'd totally forgot till i boxed them (not my work!) hope you dont mind!

starni_boy
27th August 2007, 05:39 PM
sticker looks cool as!

what brake are they? adm ae86? jdm ae86?

cheers

ae71
27th August 2007, 06:06 PM
sticker looks cool as!

what brake are they? adm ae86? jdm ae86?

cheers[/b]

AdM yO... not vented

will have to see how you get on with those drilled rotors dude, thought about doing this to mine but i thought they might crack.

sticker looks pimp

Bustin_86
27th August 2007, 06:34 PM
Kyouteki Reppin, good man.

Gilly
27th August 2007, 06:39 PM
it appears i need to make bigger stickers :lol:

breno
27th August 2007, 06:52 PM
Damn straight gilly :lol:

http://img300.imageshack.us/img300/5435/new024dn5.jpg

Bustin_86
27th August 2007, 07:16 PM
Lol, Breno is a really good customer and has been supporting us a lot so we sent him a "sponsor size" sticker to show our appreciation, please note that these stickers are not usually given out, but they CAN be purchased for $50 shipped to your door. And YES, the stickers are so madly pimping that they are made out of chrome :lol:

ae71
27th August 2007, 09:41 PM
alternately you can just be a good customer and get a medium sized one ;)

only a little bigger than Mad House

breno
28th August 2007, 10:01 AM
That pic doesnt do the parts justice man, they werent in too bad condition i hope. Did they reach you with the boxes intact?!? I used a whole roll of race tape on them!!! Yeah sorry about the drilled rotors, i'd totally forgot till i boxed them (not my work!) hope you dont mind![/b]

They are in great condition dude!
Box's were all fine, and im still stoaked about the cross drilled rotors haha, thanks again dude.

Bustin_86
28th August 2007, 10:06 AM
Your car is now my background at work LOL.

Hopefully its the only time it is seen on a government PC :P

breno
28th August 2007, 04:05 PM
more mail :crazy:
Also got a handfull of ausZoku stickers, tthey look great :2thumbs:

http://img101.imageshack.us/img101/9118/ctopvx7.jpg

hilton
28th August 2007, 04:29 PM
there sick, i expect to see pics of them on the car by tonight man haha.

ae71
28th August 2007, 04:50 PM
these are exellent, TEIN!!

hope your happy with them breno, cause they look the shiz

Bustin_86
28th August 2007, 08:12 PM
Brand new tein at used cambertop prices...

Fuck im gooooooooooooooooood

hilton
28th August 2007, 08:28 PM
fukin oath u are hahaha


bustin, i get pay on like thursday. so ill shoot yaa a pm with some bits i need ay

BouNCE-86
28th August 2007, 08:56 PM
Good Stuff!...

Am i still passengering in this beast for the cruise? :P

breno
28th August 2007, 10:02 PM
Good Stuff!...

Am i still passengering in this beast for the cruise? :P[/b]

Yeah dude.
I am leaving the Saturday though.
So we might have to organise something out.

And im also gonna have to find time to put all my gear in, dont have a day off at all until the 21st of September, yay a month straight of working 10hour days every day <_<
Ill just take it off the road for a couple days do bits in the arvo.

breno
30th August 2007, 04:52 PM
got my trd 8kg springs today!
haha its pretty funny, always the same dude delivering stuff to me so he is always asking me what it is this time.
Just waiting on my sigma's and ps arms now!

breno
30th August 2007, 04:59 PM
also does anybody know the thread pitch of the bolts that hold the rotors to hubs? i seem to be missing 4. on ae86 struts.
and does anybody know if the nut that holds the rotor onto the stub axle are the same on 86 and 70's?

BouNCE-86
30th August 2007, 07:06 PM
Sweet bloke...
Yeah, im sure we can organise something...

Ill come up and help whenever you need! ;)

Bustin_86
30th August 2007, 07:22 PM
Sigma bolt in kit and power steering arms are packed and will be shipped tomorrow :)

ae71
30th August 2007, 10:05 PM
i can take a bolt down to the loacl engeneering shop and get 4 of them for ya..

breno
2nd September 2007, 07:22 PM
everyone has a bogan side, just wasting tyres :P

http://www.youtube.com/watch?v=9tvqiRK3wzk

Snoozy
2nd September 2007, 07:35 PM
everyone has a bogan side, just wasting tyres :P

http://www.youtube.com/watch?v=9tvqiRK3wzk[/b]

Tell me thats not a 4k... if it is, mine is struggling haha
love your car man, looks sweet

samoo
2nd September 2007, 09:43 PM
bahahahahahahah man u should drive a VL :P

i joke i joke :P

LOVINGGGGGG IT!

miller
2nd September 2007, 10:34 PM
sick car mate. that shit makes me wet hahahaha

BouNCE-86
3rd September 2007, 09:34 AM
Man, next time you do skids, call me up LOL

4k POWAH!...........

86xxx
3rd September 2007, 09:49 AM
Hey Breno,

Once again sorry for missing those bolts, like i said let me know what thread they are and i'll happily buy 8x High tensile ones and express post them to you!!!

Let me know mate

ae71
7th September 2007, 12:40 PM
so got these camber tops in..? or struts and brakes....??

Bustin_86
7th September 2007, 12:48 PM
I think he is waiting for his RECONDITIONED sigma arms before he takes the front end apart...

breno
7th September 2007, 02:25 PM
woord to that!

Im gonna try and have a sickie next friday and get it all done!
Pretty much have everything i need, besides a few nuts and bolts.

Bustin_86
7th September 2007, 02:52 PM
Hopefullyill get those arms done this friday/monday man.

Mech mate is fucking me about, but they will be done ASAP.

Fresher than rjd2 beats :lol:

breno
8th September 2007, 03:30 PM
So i decided to pull it off the road a week early.
Still need 4 hub bolts, BUT i might have found some so that will be sweet. And abit of good luck, the ke stub axle nut fits straight on to 86 ones no prob so thats awsome.
Oh but the caliper bolts dont.

So pretty much just waiting on sigma arms now, ps arms and ra40 tie rod ends which are all coming next week. Hopefully i dont run into any major problems with it all :2thumbs:

And does the first photo look fimiliar to anyone else :P

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/154307.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/154308.jpg

http://img522.imageshack.us/img522/7236/woork003ba6.jpg

deleta
8th September 2007, 03:54 PM
lol your disks look like they have chicken pox lol

E7
8th September 2007, 06:41 PM
LOLOLOL ^^^^ true


should be good stuff !

ae71
8th September 2007, 08:12 PM
just need more polishing ;)

breno
9th September 2007, 04:16 PM
Not much i can really do until i get more parts, but just put one strut together properly today.
Think i might cut the trd's though, ill see how they sit when its on the ground. They are 210 free height atm, too big for my liking :P

http://img509.imageshack.us/img509/8347/woork004xg3.jpg

ae71
9th September 2007, 04:34 PM
so what bolts are you missing exactly..?

calliper to bracket? and what else?

breno
9th September 2007, 04:38 PM
4 Caliper to bracket and 4 hubs to rotor.

breno
13th September 2007, 06:32 PM
Painted the sills today.
Colour is spose to be the same, but looks abit lighter. No bigggy anyway.

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/154634.jpg

stefan
13th September 2007, 06:37 PM
looks ok age paint 20 years and it will look same

Bustin_86
13th September 2007, 06:56 PM
Looks much better man!

Lol, our cars are like in identical positions at the moment :P

Drag launchin'

Z-Style
13th September 2007, 07:43 PM
Auszoku reppin :2thumbs: looking good!!!

ae71
14th September 2007, 11:22 AM
eeerrr plastic flower puts arnt the best for holding cars in the air :P

ashie
14th September 2007, 11:24 AM
think he is holding the strut up fOOl

breno
14th September 2007, 03:41 PM
Holding the caliper up foool.
Got some more parts today. Hopefully get the rest of them by monday.
Put it all together tuesday.
Ebay seat and RYO dildo gearknob :P



http://img245.imageshack.us/img245/1881/newparts001ut7.jpg

http://img514.imageshack.us/img514/21/newparts002wi2.jpg

deleta
14th September 2007, 03:51 PM
nice shifter there dude that seat is very bright not gonna miss that shit.

Bustin_86
14th September 2007, 04:10 PM
And i thought my red daytona was bad!

Parts areon their motha fuckin way yo!

P.S, look behind the piece of paper that has your address on it.

breno
14th September 2007, 05:49 PM
seats in.
Sits higher than i hoped but meh, still pretty low.

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/154702.jpg

hilton
14th September 2007, 07:05 PM
siiiickkkkk!

Snoozy
14th September 2007, 07:33 PM
Hahaha... love the gear knob

breno
15th September 2007, 09:43 AM
Cant wait to get this thing back on the road, and cant wait for next weekend!

Realised i havnt really done a list of whats done to it so ill do one now,

Interior:
Nardi 350mm
90mm boss
OG Tacho
Ebay seat
RYO Didlo gearknob

Suspension:
AE86 struts
AE86 hubs and brakes + cross drilled rotors
Sigma Control arms
New urethene bushes and balljoints
new rack ends
new tie rod ends
power steering arms
8kg TRD springs (cut)
Tein cambertops
Strut brace
RB74 brake pads
Braided brake lines
Seirra shocks
Cut Falcon springs
Whiteline adjustable panhard rod
Double stacked rear swaybar
locker

Wheels:
4x 13x7 -34 Centrelines with 165/55R13 Nankangs
2x MA61 14x7 with 165/65R14 shit tyres.

Still has 4k, but 16v is next on the list.

deleta
15th September 2007, 09:52 AM
fuck yah dude this thing is how your suppost to build a car, all the good suspension shit 1st then the power

breno
15th September 2007, 03:44 PM
captive springs are overrateed...
Oh and u might notice, i adjusted the height of the springs for a lower down style...

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/154762.jpg

deleta
15th September 2007, 04:06 PM
wow that looks low lol, thats gonna look sick :2thumbs: :2thumbs: :2thumbs:

Gilly
15th September 2007, 05:35 PM
:lol:

not much travel in those shox if any at all now Breno :P

breno
17th September 2007, 12:14 AM
i need to stop wasting money on this thing.
keep and eye out for it on the cruise to who ever will be there.
it wont be looking the same... who imported the te71? :P

deleta
17th September 2007, 12:17 AM
so u getting some gdm parts lol

breno
17th September 2007, 10:07 AM
mabye... :P
hopefully get my parts today.
might be back on the road today, depends if i do get them or when i do.
tomarrow at the latest!!!

ae71
17th September 2007, 11:19 AM
you receive that powah up package from us Brendan?

breno
17th September 2007, 02:54 PM
still no parts :(

Bustin_86
17th September 2007, 02:59 PM
Punch the post man in the face, insult his mother, then call him a smelly pirate hooker.

Its the only way to get a guaranteed 3 day delivery :P

ae71
17th September 2007, 10:04 PM
stealing my calls now justin!!

sleal everything.... no dont say it ok just dont

Bustin_86
17th September 2007, 10:22 PM
Take what you can, give nothing back.

Gaaarrrrrr

breno
17th September 2007, 11:07 PM
bitchs pleeease.
it almost feels like christmas eve...

ae71
18th September 2007, 11:35 AM
just wait til it all get there, you will be rollin in pimp

Bustin_86
18th September 2007, 11:59 AM
Literally, i included some "pimp juice"

jeah!

ae71
18th September 2007, 01:12 PM
justin STOP mazzing the packages that we send people!

its really not that hard, ge a rag or something.... lawl

na im sure you wouldn't do something that darsartdly to breno

breno
18th September 2007, 02:39 PM
still no parts...

Bustin_86
18th September 2007, 02:46 PM
So. Wakk.

Australia post beatdown.

breno
18th September 2007, 03:59 PM
Well doesnt look like ill be at the cruise, australia post is slack, overnight delivery my arse for express post.
Its been 4 days...
And almost been a week since Justin sent the box.

Bustin_86
18th September 2007, 04:07 PM
Yeah man my apologies, box should of been there today at the VERY latest

Gilly
18th September 2007, 09:38 PM
Well doesnt look like ill be at the cruise, australia post is slack, overnight delivery my arse for express post.
Its been 4 days...
And almost been a week since Justin sent the box.[/b]

seconded

i have that prob with aus post as well

actually you know this Breno :lol:

ke70_sa
19th September 2007, 04:02 PM
nice pics on pg 1 of sliding it.
dirt roads are the only way ;)

breno
19th September 2007, 04:51 PM
Well i got my parts.
But they are pretty much usless.

Turns out im missing more parts from the hubs and brake setup i bought of medwin.
Initially he didnt include hub bolts, caliper bolts, some hub bearings. But no biggg deal. I had spares and bought some new bolts.
But putting it together now, i realised something was up, im missing the main bottom bearing in the hub which is a massive bitch to get out, soo it cant of really fallen out. this has been the biggest fuck around buying these hubs and brakes.

RobertoX
19th September 2007, 04:56 PM
^ ouch!

did you get your brake stuff?

Bustin_86
19th September 2007, 04:57 PM
Mmmmmmm sorry to hear dude....

So your happy with the parts from Kyouteki?

breno
19th September 2007, 04:57 PM
Yeah got the brake stuff.
Cheers dude.

Bustin_86
19th September 2007, 04:58 PM
I didnt send you any brake stuff?

Nothing got broken, everything was there?

ae71
19th September 2007, 04:59 PM
i think i know the part that you mean, so its not the same as ke..?

im not sure if you can buy them new or not....

breno
19th September 2007, 05:03 PM
Yeah i got all the stuff.

But im just majorly pissed off at moment by how much medwin ripped me off.

ae71
19th September 2007, 05:15 PM
you want to buy or just see everything you need....?

i dont think it jesse intentinaly setout to rip you off brendan i dont belive he is that sort of person, he said he would happly compensate you by buying new bolts when you found that they where missing....

breno
19th September 2007, 08:56 PM
yeaah, well its not all that bad.
Just over-reacting this arvo from a already shitty day.

I got 1 side done. Picking up new bearings and dust housings tomarrow so im pretty confident it will be on the road then.

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/155105.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/155106.jpg

deleta
19th September 2007, 09:03 PM
looks friggn pimp man

BouNCE-86
19th September 2007, 09:40 PM
This better be on the cruise dude... Cant wait to see the updates!

breno
19th September 2007, 10:18 PM
http://img339.imageshack.us/img339/4851/susfe3.jpg

Anouther photo.

hilton
19th September 2007, 11:05 PM
shit yeh, cant wait for pics once its on the road again.

breno
20th September 2007, 09:52 AM
Good news. Just got brand new bearings and dust seals.
Will be on the road today!