PDA

View Full Version : hydraulic throw out bearing



350hp4agte
1st April 2009, 08:18 PM
i have one of these set ups it came with my w5x box when i got it just wanted to no if nayone has one and pro's and con's of a set up like this

please discuss

http://img3.imageshack.us/img3/9000/jeanmonfortg.th.jpg (http://img3.imageshack.us/my.php?image=jeanmonfortg.jpg)
http://img3.imageshack.us/img3/1347/mcleodtob.th.jpg (http://img3.imageshack.us/my.php?image=mcleodtob.jpg)

Sprinter86
1st April 2009, 08:27 PM
these are handy if your using an auto bellhousing, ie. you can make/buy an adaptor plate from an auto 1uz bellhousing to W5* and use this throwout setup, leaving no mucking around with cutting holes, drilling and tapping etc.

other than that i know shit all about em! i do like the idea tho!

driftke70
1st April 2009, 09:35 PM
set up one with a friend in a jzx100, with a r154, pretty nifty little thing, took a little shimmage to get it sweet and had to make a spacer on a lathe but worked out pretty awesome, awesome pedal feel too. Id do it if i had the time and inclination and money.

350hp4agte
1st April 2009, 09:40 PM
sweet i understand the pedal feel but does it make it heaps harder to push the pedal

driftke70
2nd April 2009, 01:20 PM
easier

Beau
2nd April 2009, 05:39 PM
id run one of these if i could be bothered. Just cause you lose the salve and the fork system. Makes things easier and lighter. dont have to worry about heat effecting the slave or anything like that

driftke70
2nd April 2009, 08:02 PM
easy bleed sort of too, and you get a better push on the clutch plate.