PDA

View Full Version : Steering Lock - Quaife Rack, PS Arms, Tie Rods, Tie Rods Ends



LAA_80E
5th August 2007, 08:57 PM
Hi all,

I'm currently setting up my 86 for Drift and have been trying to get the same amount of steering lock as what Ueo's 86 has.

This is my setup, Everything else is stock:

Quaife 2.5 Quick Steering Rack with 3 Extra Teeth - Extra Teeth cut at a machine shop by a very talented machinist (Couldn't tell there was any work done at all it was such a good job :D )
New Bearings and Bushes - Geniune Toyota for the Rack Housing
AE86 Power Steering Arms
Nagisa Auto Ueo Style Tie Rods
Nagisa Auto Ueo Style Tie Rod Ends

Lock to Lock it's only 2.2 Turns which is very good for drift, although I'm not completely satisfied on the Lock I'm getting and I think it has to do with with my remaining stock parts on the car. I think to fix this I need to get some aftermarket lower arms (like Cusco) and NCRAs (T3 or Revolver). I might also need some extra lock spacers from AJPS but I'm not sure if this is going to push my wheels out further and cause problems as the Nagisa Auto Ueo Style Tie Rods I have are already mean't to be longer for more lock. Hopefully after putting these new parts in I will get extra lock I'm looking for. If anybody has some thoughts on this please feel free to comment.

Here are some pics of the lock I'm getting:

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152244.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152245.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152246.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152247.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152248.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152249.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/152250.jpg

andro0o
8th August 2007, 03:45 PM
is that scrubbing at all..?

RobertoX
8th August 2007, 08:05 PM
i will send you a lock spacer? cant hurt

chris's car had more lock with different lower arms and more caster

LAA_80E
8th August 2007, 11:31 PM
is that scrubbing at all..?[/b]

I thought it wasn't but after checking again it looks like the inner guard wall is stopping the wheel from turning more. This could be my main problem!

I will be smashing the inner guard wall in on Saturday morning and will post an update of what happens after I've taken some photos.


i will send you a lock spacer? cant hurt[/b]

Thanks for the offer. I'll wait until Saturday before I organise getting the spacers from you.

Cheers.

andro0o
9th August 2007, 12:40 AM
as truenosedan said,

give her some more caster, you'll have better turn in aswell.

stefan
10th August 2007, 01:16 PM
i have almost full 90deg lock with lock spacer and ps arms with stock rack just rebuilt and ra40 tierod ends etc etc

kaibeecee
26th August 2007, 09:18 PM
not bad for 86 stuff. too much scrub radius with 86 struts in my opinion.

s13 suspension just negates all the expense of exotic japanese 86 parts, and you get more lock. but not to advertise.

is there enough thread on the ueo tie rod ends for a rack spacer?