View Full Version : moving on....

25th November 2007, 09:26 PM
(copied from my toymods thread, coz I'm lazy)

well after owning the celica for exactly a year i decided to "trade up" to a corolla wagon. the car came from a wreckers so wasnt in the best shape, but it looked good was manual and could fit stuff in the back....



i picked up the car september some time, driving it home on the celica plates :P , and convieniently the fuel filter desintegrated a few kms from where i picked it up....fun. after finally gettin it home work began on fixing rust, and the usual worn out parts for RWC.



the list included: lots of rust, brake hoses, seat belts, tyres, air box/filter, battery mount...a few other things as well (can't recall).

with 20+hrs of uni a week and $80ish coming each week from my one day of work it took me the best part of 2 months to get it all sorted. finally got rego on 1st oct!


was loving having the wagon, and a manual...a little too much perhaps?


2 weeks after getting the car on the rd, had a little late night scuffle between the left side of my car and a gutter....the gutter won. i like to think i caused some emotional damage at least. in the above pic, there a few degrees of positive camber, toe out and a bent stub axle (which resulted in a siezed brake). lets just say that it pulled slighty to the left after that.



so once again i needed to take the car off the road to fix it. this time i decided to overhaul the entire under carrage, brakes, suspension while i was at it.
-polyurethane (sp) bushes throughout
-ra40 front struts, brakes, LCA, toe rods, castor bars
-chopped ae71 springs (for the time being) to test ride height
-added flipped leaf to the rears, and reset each side
-ma61 wheels on the way

after another month off the road the dori wagon is again running, so i figured i put this up before it went off the road again....

future plans:
-ma61 front seats
-flared guards
-custom front bar/lip
-researching 4a carby-turbo setups (coz I'm alternative and shit)
-fix rest of the rust i missed and respray
-bigger front sway bar, custom rear sway bar

25th November 2007, 09:27 PM
so i went from this prime example of old skool (the paint was much worse then it looks in this pic

to this prime example of 80's cubism...




comments and opinions welcomed.


25th November 2007, 09:33 PM
haha that looks killer!

it sits very well and looks like its at a decent hight

25th November 2007, 09:38 PM
that looks tuff as

25th November 2007, 10:54 PM
Garage Hokin come through with the goods :P
we chop em and lock em (y)

26th November 2007, 10:24 AM
Celica is mmmiinnnttt

26th November 2007, 10:58 AM
the wagon looks tuff as bro. really nice height. & well the celica... :rolleyes:

26th November 2007, 10:52 PM

the height is perfect at the back a touch too low up front but doesnt rub (after i took out a few bolts that held in the splash guard, and wound the castor back). looking for some short stroke insert for the ra40 struts atm, heard that gt4 celica ones will fit.

few more words on spec:

4ac, t50 running fairly well? (havnt driven any others to compare)
tacho dash
locked diff curtiousy (sp) of garage hokin/wesley engineering.
replaced plugs, leads, dizzy cap, rotor button, points (when i get of my ass).
torqued head bolts, all new fluids (brakes, clutch, eng, diff, g/box), new soft lines
old school saas drift wheel, need a new one.

stay tuned for more mods as i am working lots now. 4 months of uni holz!!!!!!WOOOOOOOOOOO

29th November 2007, 09:14 PM
haha these wagons are so cool(biased)

You guys must breed them down your way, I went south of the border to pinch mine and bring it back to civilization.
The looks it got on the way home where priceless.

Lots of work + uni holidays = another turbo wagon :2thumbs:

Lookin good man

7th December 2007, 07:06 PM
small update, got bored and took a few pics (only camera phone)



parts on the way: ajps lock spacer, ae92 front bar, ma61 rims and front seats looking closer (next 2 weeks), wheel alignment :2thumbs:

7th December 2007, 09:00 PM
Hey are those 75series tyres on those rims! :o some low profiles will look mint. :)

Do you have a tacho dash? i have one spare if you want. got heaps of other ae71 bits too. You from around Ringwood?

7th December 2007, 09:50 PM
<div class='quotetop'>QUOTE (slidn70 @ Dec 7 2007, 09:00 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=448580)</div>
Hey are those 75series tyres on those rims! :o some low profiles will look mint. :)

Do you have a tacho dash? i have one spare if you want. got heaps of other ae71 bits too. You from around Ringwood?[/b]

yeh 75 series FTL. hence why im soo keen for the ma61 rims, since i already have 195x60 (or 65 cant remember) tyres for the rims.

i have a tacho dash already (with 309XXXkms lol) and some spares already, wreckers is only a 15mins drive away so no worries...im near chaddy BTW. if any one wants to crusie one night or sundays, give me a buzz im always bored and looking to go for a drive :wink:

12th December 2007, 05:25 PM
got ae92 front bar last weekend off toymods. drove around with it "test fitted" to the car (red, and cable-tied all up the front) for a few days then resprayed and fitted it properly today on my day off. i think it looks tops! just need to sort out some indicators and probably fidle with the mounting slightly.

still waiting on AJPS lock spacers, ma61 rims and seats.

also threw on some new wiper blades, washer fluid, and chopped the carby cover a lil :2thumbs:

on with the pics.

how i drove round for almost a week, without a defect :greenbounce:

painted and fitted.


hold on for more updates....

12th December 2007, 06:15 PM
damn, im actually quite liking that front bar. it makes me wish i still had my old wagon...

nice work so far

12th December 2007, 06:59 PM
dont like the fitment of bar much :P
it has odd lines

13th December 2007, 12:59 PM
Looks sweet dan. BLOODY RAIN!!!!

13th December 2007, 04:07 PM
Cool project. Front bar doesn't do it for me but each to their own...
Flat KE70 front wagon with MA61s does look f#cking hot though, maybe go that way....

13th December 2007, 06:38 PM
<div class='quotetop'>QUOTE (floody31 @ Dec 13 2007, 04:07 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=451728)</div>
Cool project. Front bar doesn't do it for me but each to their own...
Flat KE70 front wagon with MA61s does look f#cking hot though, maybe go that way....[/b]

well i actually want to convert the front end to a levin. but cbf paying 1500-2000 for front end...

yeh smelvin, bloody rain!! checked the weather today, in the last week melbourne has had no rain, the rest of the state has. :wtf: what happened to you doin the rain dance every night before bed? not like you could of gotten out with ur blown 4ac any way :(

....still waiting for my ajps lock spacer *cough* <_<


13th December 2007, 06:43 PM
Garage hokin ay, must ne the reason why there was gutter action :P

works510 in waz's account

15th December 2007, 03:24 AM
haha we weren't even present when he hit.

I don't hit that many gutters do i :huh:

Just like trees n ditches n shit

2nd January 2008, 11:09 PM
small update, no pics as yet.

FINALLY got my lock spacer from dave at AJPS, so that will hopefully go in this w/e or next. aslo got bored and decided to buy a stereo. have 4 jvc 6" speakers (one in each door), 2 pioneer 6x9" 3 ways in the tail gate and a sony 600W amp, with pioneer H/U. goes well didnt want a sub floating round in the boot since i actually use it. so atm the 6x9's are running as subs. seems to be holding up and sounds good.

so pics of stereo and extra lock on their way. tints to hid all money spending also on the way....

also in the works is a e30 323i drift car. stayed tuned (if i get it....)

2nd January 2008, 11:17 PM
looks neat without the rewar bar
front bar looks ok just needs a lip on the bottom maybe?

2nd January 2008, 11:37 PM
coming along well mate, would look good with a flat front, are ay gunna paint it?

3rd January 2008, 07:49 PM
dont care about paint too much. more concerned about handling, and engine really. paint will be last on the list. as i said earlier i wanna go levin front, but dont wanna pay the $$$ for it (damn tax).

5th January 2008, 12:52 AM
fucking TUFF!

never see a ae71 with that front bar
fucken nice bro (y)

5th January 2008, 07:27 PM
Cool ride, you don't see too many wagons around.

I'm not down with the front bar though....maybe if it fitted flush with the wheel arch.

5th January 2008, 07:30 PM
get jap front end quads mad lip and fender mirrors

lower it and get some 14x8 and 14x8.5 and pump out guards

6th January 2008, 12:15 AM
went at it today in 36ish degree heat. was fun i recommend it to ALL your friends :2thumbs: . lock spacer is now in and spacing my lock. cbf fitting the rest of my stereo as thats another (cooler) days work right there.

how to install an AJPS lock spacer:
step one;
once the cars up on stands wheels off and tie rod ends un-done remove the boots of the rack ends. remove LHS (passenger) rack end.

step two;
screw lock spacer onto rack end FIRST. i found that the thread on the rack end didnt continue all the way, so i had to use a big ass washer to give the spacer a surface to screw against. you need a 30mm open end spanner for the rack end and a 22mm open spanner for the spacer/rack. these need to be fairly narrow (which is gay, since any spanner that big is too wide), so be careful not to round off the slots.

step three;
refit the rack end (with spacer) to the rack. again be careful to not damage the slots. the threads did not have any sign of greese or locktight/boding agents so i chose not to use any -up to you.

step four;
measure the distance from the inside of the rack to the end stop. it should be even. this means the rack is centered, far more accurate and easier IMO then counting turns-to-lock. in my case its was 80mm either side.

step five;
as i am running ra40tie rod ends i had to shortern them. (i am also running ra40 LCA's but they are not much longer). i cut 15mm off each end to keep it even. the stock rolla tie rods would not need to be cut (with the ra40 LCA or bigger).

step six;
wheel alignment time. i tried to keep the lengths even each side but they were not, i assume the LCA's are not the same length. insted i turned full lock one way and adjusted the wheel away from the inside wheel well a few centimeters. and did the same to the other side. then wound out approx. same turns until i was happy. this worked well i have a little toe out, and the car only lightly drifts to the left. i will ofcourse get a professional wheel alignment but this is in the mean time.

time for before-after pic

lock before spacer.

lock after spacer.

not too special, i think i will get a little more (i hope i will) after the wheel alignment. but overall im happy i can now park without doin a 3-point-turn!! <_<

and thats my story.....

6th January 2008, 12:48 AM
fark nice man!

woooot 3 point turn haha!


6th January 2008, 02:38 PM
if you ps arms youll get crazy lock

8th January 2008, 07:22 PM
another senseless update, but an excuse to whore my wagon onto the net none the less!

finally got round to nameing my car.

meet Doris, the dori wagon :wub:

she likes dancing in the rain and long drives by the beach. very down to earth girl, she rides well loves to be treated rough but sometimes i baby her anyway. and best of all SHES ALL MINE :D .

(pics for the sake of it)



8th January 2008, 09:12 PM
dammit i want my wagon back now..

9th January 2008, 08:42 AM
mad bro i love the front bar looks sweet keep up the good work

18th January 2008, 09:24 PM
well more updates because i like to....

bonnet lifts, only a few cm (2-3)

front bumper was a tad too wide, so after a consultation with garage hokin it was decided to chop and plastic weld it together.

after realising i didnt have a palstic welder i...erm...improvised :2thumbs:

also decided some intake mods were in order, since the car wasnt making enough power i went for ice blue (to help keep temps down)

exhaust should be on the way, have a new (old) muffler to throw on so just waiting for some gas to weld with.

as always, stay tuned for more! :greenbounce:

25th January 2008, 09:27 PM
Was driving next to ya on warrigal rd yesterday.. I must say it's looks rather interesting in person. Ghetto, but I like it :)


26th January 2008, 01:07 AM
how's ya chassis rails dan?:P

26th January 2008, 06:53 PM
<div class='quotetop'>QUOTE (deNs @ Jan 25 2008, 09:27 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=474730)</div>
Was driving next to ya on warrigal rd yesterday.. I must say it's looks rather interesting in person. Ghetto, but I like it :)


*really?! hahah shoulda beeped me :P

*yeh smelvin havnt had a chance to check the car over, gettina new rack, rack ends, sway bar, bushes just incase ;) :2thumbs:

don't think the bonnet lift worked? car over heated today, guage read fine (no reason to not trust it....), but over flow bottle boiled over after i turned it off. was after a 15min cruise back from some, errr....ummm....yeh more driving :ninja: . strange....

26th January 2008, 07:06 PM
this things mad......thought about some kind of controll arms???

27th January 2008, 01:42 PM
<div class='quotetop'>QUOTE (HiLtOn @ Jan 26 2008, 07:06 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=475028)</div>
this things mad......thought about some kind of controll arms???[/b]

already has ra40 LCA's. thinking of going ma61 LCA's since looks like i'll be getting one :rolleyes: .....hahahaha.

fingerss crossed everyone, that i can get the cash together. this wagon will turn into a 'fun' daily. still stiff, low, locked etc. while the drift ma61 gets built :greenbounce:

22nd February 2008, 09:26 PM
good news everyone! its update time. been awhile between drinks since i was on holidays then work fulltime again. not to mention I'm incredibly lazy....

i got off my ass and bought a guard roller! :greenbounce: win! so in the process of flaring my guards and learning as i go. will be very happy to help out any melb modders wanting the same treatment but if you care about ur paint then i'd wait till i have a better hang of it.

heres a pic part way through the first guard.

will be 10Xwider and higher when I'm done :rolleyes:

also got some rims from the wreckers, bit of a spur-of-the-momonet thing but only cost me a lil, so I'm not fussed.

will post up more pics once the wheels are on and guards are finished...

22nd February 2008, 09:43 PM
how much did ur guard roller cost?

23rd February 2008, 01:46 AM
guards roller was $150 from bursons. with a discount ^_^

25th February 2008, 10:45 PM
more pics to interest you peoples....

taudi- toydi- audit- audta, lol its cool

little wider thanks to some roller goodness. still not 100%, i want it a bit more even, and higher. ...not like i have rims to fill them with.....YET <_<

engine now cooler, faster, more responsive thanks to this $30 mod i highly recommned it. :2thumbs:

tyres and rims will hope fully go on sometime this week if i can afford to take some time off to get to the tyre shop.

and just for the sake of it. a mates new drift project. very much in the making....still no RWC what a lazy ass.

unfortunately only the two. but still hot!

25th February 2008, 10:49 PM
gotta let us borrow the gaurd roller yeah dave :P

25th February 2008, 10:55 PM
Seen this on the cruise , fvcking cool as.
Esp like the front bar and no rear bar combo, needs some nice wheels!

25th February 2008, 11:10 PM
<!--quoteo(post=492576:date=Feb 25 2008, 10:49 PM:name=ѕніс
)--><div class='quotetop'>QUOTE (ѕніс
@ Feb 25 2008, 10:49 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=492576)</div>
gotta let us borrow the gaurd roller yeah dave :P[/b]


I'm dan....

anyway, once i practice a bit more with the roller. lipping, flaring etc then i will lend/hire my services to the public. until then i will be figuring out how to flare the rears, lol its so low and short that the roller doesnt line up.....hmmm

25th February 2008, 11:25 PM
Caution, cheaply made guard roller :P don't rush and put heaps of tension on the guard coz you'll strip that threaded rod
:angry2: .

I hope that sticker has been removed also :lol:

25th February 2008, 11:36 PM
<div class='quotetop'>QUOTE (was @ Feb 25 2008, 11:25 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=492601)</div>
Caution, cheaply made guard roller :P don't rush and put heaps of tension on the guard coz you'll strip that threaded rod
:angry2: .

I hope that sticker has been removed also :lol:[/b]

lol clearly I'm still reppn 'that' sticker. when you make stuff thats goes in cars and makes then better then maybe your stickers will find their way onto my car...:P

i was cautioned by the guys at bursons (one of them has one) so i already know about the weak points, and whne you look at it its not hard to pick... but i do take it slow which is why it took me bloody hours to get the guards where they are.

25th February 2008, 11:41 PM
<div class='quotetop'>QUOTE (resol @ Feb 25 2008, 11:36 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=492608)</div>
<div class='quotetop'>QUOTE (was @ Feb 25 2008, 11:25 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=492601)
Caution, cheaply made guard roller :P don't rush and put heaps of tension on the guard coz you'll strip that threaded rod
:angry2: .

I hope that sticker has been removed also :lol:[/b]

lol clearly I'm still reppn 'that' sticker. when you make stuff thats goes in cars and makes then better then maybe your stickers will find their way onto my car...:P

i was cautioned by the guys at bursons (one of them has one) so i already know about the weak points, and whne you look at it its not hard to pick... but i do take it slow which is why it took me bloody hours to get the guards where they are.

To make a toyota better, you buy a nissan to replace it. :greenbounce: :crazy: We sell them occasionally.

yeah i don't have the patience for the job....threaded it using it on Sam's stanza and then didn't bother, hammer does the job.

27th February 2008, 12:45 AM
rims on, and looking hot! very happy with how they sit...unlike the rear susp height, needs to be a inch lower or more.



also have oil pressure, oil temp, and water temp guages coming soon. and perhaps a new diff. one that doesnt break.

27th February 2008, 08:26 AM
mad i have a set if those steelies they looked sweet when i painted the centres matt black :greenbounce:

any way bro keep up the good work :2thumbs:

28th February 2008, 05:57 PM
pump them wheels out and fender mirrors and that will look fucking tuff as

nice work dude, wagon FTW!

16th March 2008, 12:53 AM
youtube link (http://www.youtube.com/watch?v=VH1Ir2CHnFg)

theres a link ^. watch, listen and try and guess what my latest mod is :lol:

16th March 2008, 08:57 PM
sounds tuff!

16th March 2008, 09:02 PM
On another note...these guys are poofs


16th March 2008, 09:18 PM
What LCAs did you end up using?

17th March 2008, 12:04 AM
does sound tuff. who would of thought......

yeh those guys are much gay

read up bro, ra40 front end.

4th April 2008, 12:03 AM
well for those that didnt guess, and those who cbf even watching the vid (it was totally worth it!) i blew the HG on the ol' 4ac. so 1 engine down. got another engine in and running with a shitty carb that keeps getting clogged up....and no carby cleaner wont cure it so don't say how to fix it.

latest news....i failed at turning....


saving madly for supra now...

4th April 2008, 12:43 AM

4th April 2008, 12:52 AM
sucks man! go kefront :P

4th April 2008, 12:53 AM
Get a swaybar!

or a sedan.....

4th April 2008, 02:22 AM
how bout i get a supra, with the mega poo's (and sway bars and coil overs...)?!?!!

although it doesnt look that bad in the pic. it has a bent chasis rail on the LHS....

4th April 2008, 11:16 AM
oh then thats FAIL!

gravel Rds / dirt rds and go ape shit

4th April 2008, 11:49 PM
those 13's u got from tehw reckers,
ive got a pair
\with painted black centres, looks better imo
just a suggetsion

4th April 2008, 11:54 PM
Epic fail

5th April 2008, 12:27 AM
LOOVE YOUR guards mate! sorry to hear about the epic fail tho! :P

5th April 2008, 12:31 AM
<div class='quotetop'>QUOTE (resol @ Feb 26 2008, 11:45 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=493272)</div>
OMFG this car is cool !!

sorry to hear about what happaned T__T

6th April 2008, 11:14 PM
LINKY (http://www.youtube.com/watch?v=Jj7Q668Aup8)

some unllawful teens stoled my rolla and abused it on film.....

6th April 2008, 11:18 PM
check it out i got a hand penis !

GOLD! top sliding!

oh and DAMN THOSE KIDS!!!!! :P

7th April 2008, 04:49 PM
um lol wtf

29th April 2008, 09:25 PM




some of the local eastside boys.

desided to take some happy snaps then head out for a happy drive.... :unsure: yeh.

weber on the way thats to gullie
kyb excel g shocks in the front
soon to be dumped
rear seat gone
new(er) diff, old one was too load and broken....

12th May 2008, 07:42 PM
more updates:

weber in
s13 drivers seat in
new bozo zorst being made up
pics to come

12th May 2008, 11:32 PM
Did the damage buff out?

13th May 2008, 05:34 PM
<div class='quotetop'>QUOTE (stahlz_ae86 @ May 12 2008, 10:32 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=530243)</div>
Did the damage buff out?[/b]

read up ^^ its chasis damage....

14th May 2008, 11:36 PM

19th May 2008, 06:01 PM
update with pics and vids, just how you kids like it!

so as mentoned;
weber -> ON
s13 seat -> IN
bozo pipes -> SICK
awesomness ->INCREASED

bozo style (http://www.youtube.com/watch?v=i6EtVyfEp8A)


straight through with resonator, no muffler, over diff (coz I'm lazy)

back seat gone, s13 seat in. much nicer!

ALL emission gone!

19th May 2008, 10:16 PM
looks like fun!

20th May 2008, 12:43 AM
Yeah Cranby, looking good. Now come and work on my car so I can at least get it registered, then I can make ghetto shit that makes my car cool and I can be like you. Without the fringe.

8th June 2008, 04:42 PM

8th June 2008, 04:49 PM
sucks man
what u get done for?

8th June 2008, 06:35 PM
Does that mean you'll have to fix the chassis if you want the defect off?

8th June 2008, 07:22 PM
god damn get a sedan cranby!#@@$!@#

9th June 2008, 01:14 AM
bah what for ? easy 2 clear?

9th June 2008, 01:28 AM
only minor. very easy to clear unlike other who weren't so lucky...

9th June 2008, 02:20 AM
yeh yeh.

was defected for:
-protruding exhaust> must comply with stock
-missaligned headlights (from crash)> must comply with stock
-improperly mounted handbrake cable> was running on the leafs, and held out of the way with cable ties.

will take about 5 mins to fix all of that at no cost.

BUT the fag cop ticked yes to RWC. and i have no rear seat, no bumpers, carby, catch can, s13 drivers seat, modified suspension (camber, chopped etc) sooo yeh thats gona be fun. and i have exams so yeh sucks.

but other got it worse. out of 5 cars 3 were majored and not meant to be moved...lol.

19th June 2008, 06:19 PM
another awesom night drifting. another broken diff.

defect still not cleared. thinking of parting the car and buying something nissan....

ra40 front struts, with near new disc and pads (bigger brakes, fits after market shocks-same as sprinter, supra, mr2 etc et)
modified stock corolla steering arms, also stock celica one (less lock)
commo springs ~7/8kg (uncut, set your own ride height)
chopped corona springs (stiffer then stock, bit soft for drifting maybe 5/6kg) good ride height (guard just above the tyre)
brand new kyb excel g shocks
used monroe shocks (good for fun street driving, bit soft for drifting)
ra40 LCA with nolothane bushes, ball joint ok (not new but works well enough that u don't notice it.) give 1.5 neg camber
castor bars with nolothane bushes
mx83 LCA, slightly better condition ball joits to the ra40 ones, give 3ish neg camber
ra40 tie rod ends, one adj cut down 15mm, the other is bent slightly (they are tie rods, they work fine)

any and all interior bits
tacho dash
2 saas wheels (non dish) 330mm and 360mm
toyota boss kit
doors clean no rust
ajps rack spacer + custom drivers side 5mm slip on spacer (for that little bit extra)

3 14x6"steel wheels(in pics above on the back)
1/2 dozen pairs of 14x175/185/195 tyres
4 stock 13" steelies

4ac runs well, revs to 8,000 nicely, brand new 70 degree thermostat. car NEVER over heats
32/36 dgav weber and adapter, with custom linkage.
gatorade catch can kit
straight through zorst with bozo style tips.
manual/ 4a conversion gear (cross members, g/box, tail shaft, radiator WITH THERMO FAN, pedal box, clutch MC/slave etc etc)

2 spare axles
2 locked centers (one good, one little bit of back lash, both with broken axle in them)

pioneer h/u, with aux and RCA outputs
sony 4/3 channel 600w amp
2 pioneer 6x9"
4 jcv 6" (2 brand new never used)
all cables (power, earth, speaker, RCA)

19th June 2008, 07:26 PM
Pic of this 'boso' exhaust?

19th June 2008, 07:41 PM
<div class='quotetop'>QUOTE (marvis @ Jun 19 2008, 06:26 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=548924)</div>
Pic of this 'boso' exhaust?[/b]

pics up there yo^^^

its boso style. so weird angle twin pipes. sounds VERY boso, nice and raspy.

19th June 2008, 09:02 PM
Hey resol

I sent you a PM mate, very interested in some parts you may have.


20th June 2008, 07:17 AM
somebodys seen the light ;)

20th June 2008, 09:20 AM
Dosen't look boso... more 'drift' pipes'

Sweet video though

21st June 2008, 05:58 PM
now parting car.

buy some junk, help a drifter out. need a new car so i stop driving other peoples....

http://www.ae86drivingclub.com.au/board/in...showtopic=33423 (http://www.ae86drivingclub.com.au/board/index.php?showtopic=33423)