PDA

View Full Version : jays ke70



dunga70
28th March 2008, 10:17 AM
hey everyone. ive been here for a while now so its about time i did one of these.

got ke70. goldie colour. its a standard 4k with 5sp..
was perviously owned by dyso
and chez06

rims:
bought some ssr meshies. 15x7.5 .0 offset

after 3 months of stockies on the front gaurds were altered and rims got put on yesterday. however they r rubbing.. hard to explain but they r fine in a straight line and round slow corners but when car bodyrolls a little they rub. rims currently have 195 50 15. was gonna go for 185 40 15. but apparently they don't make them :( so rims will be for sale soon. will be looking for 13" or 14" longchamps or other ssr meshies...

suspention: 100mm from ground.
front- ae86 struts with ajaps springs. sigma lca's and ra40 tie rod ends. got neg 3.5 camber-
rear- falcon springs (chopped??) with sierra short stroke shocks..
ae86 pan hard rod.
soon to have camber tops. paid for and everything along wth strut brace. yay

interior: steering wheel and stocko shifter-love it.

drive: um 5 sp box. think they call it a k50 its an xx model?? plus 4.77 auto diff..

brakes: front ae86 calipers discs. ferodo pads.
rear: stock

engine: stock 4k with apparently reco? new leads plugs dissy cap and dissy button.

exhaust: hot dog. and now extractors.. standard in between
NEW- now has quads..

also i got fender mirrors sitting in my room to go on. madhouse front lip waiting to go on.. and t18 bumpers. starting to get sick of spending money. :(

let me know what u think.

LIL BLU MAN
28th March 2008, 11:28 AM
nice keto man ! sits very nicely, u selling those meshies ? or the ones in the previous pics?

howee
28th March 2008, 11:30 AM
I'm pretty sure thats hot.

Thats got an awesome height. Wheels fit well.

Can't wait for over haul of look with the quads.

howee

dunga70
28th March 2008, 01:36 PM
will be selling the ssr meshies.. still got the other rims if u want them too lol .. but ssr's r just too big n they rub on corners.. which is gay cause gaurds were cut and shit. gonna try get some 14 meshies or something.

lewa
28th March 2008, 02:38 PM
this car is awesome! love the look of it with the meshies!

dunga70
27th April 2008, 11:17 AM
update:
quads arrived the other day finally. need jdm beaver panel.. got front lip to go on when ever i feel like drilling holes in car. same with fender mirrors.. replaced the 15x7.5 0 offset with 14x6.5 unkown offset. with 185/55r14 federal rubber.
cambertops and strut brace should be in the mail. its all paid for.. just unsure where it is cause it has been a while- ajps??

couple new photos. :turned: .

Clinton
27th April 2008, 12:23 PM
nice car man! were abouts in 'the shirYAA' are you?

dunga70
27th April 2008, 12:48 PM
i live in sutho dude. the heart of the shire.

Clinton
27th April 2008, 02:12 PM
the shire is epically gay. you should come out with my yowie bay round about gang. just leave the quads and anything not worth smashing at home too

P.S. ive taken my 4k past 7 grand at the bends , try 8 lol

resol
27th April 2008, 04:17 PM
if ur car has too much roll, then do something about it. put stiffer springs in. or sway bars. don't have a cry about it....

car looks sweet though!

dunga70
27th April 2008, 07:55 PM
car does not have too much roll! it has none. when i had the 15's on the gaurd sat about 2-3 mm away from tire. it was sweet in straight line but when u pumped it into a cforner it could touch the gaurd. anywho its got ajaps 6 or 8 kg spings as it is its stiff enough.. i couldnt go any stiffer cause its a daily.

anywho cheers for ya thoughts

spillman
27th April 2008, 10:45 PM
clinton, who is in this so called "yowie bay round about gang" i live on forest rd just down from the round about you would probably drive past my house, i currently have a rodeo sittin on the from lawn,


sorry to disturb your thread

Todd
29th April 2008, 03:46 PM
my old meshies!

gotta say they look better on your car than they did on mine.
hope u like them! :)

RobertoX
29th April 2008, 04:42 PM
my old rims too haha

looks good man!!

pm me again

Teddy
29th April 2008, 05:28 PM
Good Man! 4k's Love the RPM :D

dunga70
29th April 2008, 06:49 PM
yeh 4k love...
one day it might be 4age love.. haha
yeh thanks for the rims dude they r nice.. not too bad over 100kms.

Konakid
29th April 2008, 08:30 PM
If you wanna fit some wide low offset rims, ditch the sigmas for some corona arms.

dunga70
30th April 2008, 10:28 PM
I'm getting camber tops so wouldn't this do the same as getting smaller arms for less camber?? i don't really think i can go too much wider or too much more offset wwithour modding gaurds more. problem is its too low..
atm I'm just trying to get it running right its is so urelighable atm. stalls some times cause it doesnt get fuel.. dunno y.. stalled tongiht.. gona get a mobile mechanc tomoro i hope.

Konakid
30th April 2008, 10:31 PM
Kind of, camber tops lean the tops of the wheels in, they don't actually decrease track, they can increase it the more -ve camber you run.

Clinton
1st May 2008, 04:52 PM
might go out tonight. PM me.... if you dare!

shorty
1st May 2008, 07:51 PM
nice lookin ke

what are those meshies?

i friggen want a set!

dunga70
2nd May 2008, 12:27 PM
ssr reverse mesh. 14x6.5. with 185/55/r14's... the r nice rims.. n i got hotwires on bak 13x6 or 6.5? with 185/60/r13's. wish my 15's fit..

Clinton
2nd May 2008, 12:49 PM
just make the fit man. trolley bar and fibreglass/bog will always make bigger wheels fit on gaurds

dunga70
6th June 2008, 08:10 PM
ok update... so here is update..

ahhh nothing...
got parts waiting for me to have time...
i got a new diff, a bearing went the other day driving home.. :( then it rained for like a week... :(
i got more rims.. :D so far in my collection..
i have
-pair ssr reverse meshe 14x6.5 n car..
-pair hotwires 13x7 on rear..
-pair 15x7.5 0 offset ssr reverse mesh
-pair 14x7 hotwires.
-pair chevoit 14x7 dunno what they r they got semi slicks..
-pair 14x7 jellies.
-pair ssr mrlls 13x8.
still have fender mirrors. which I'm thinking i wont put on and sell..
got another new fuel pump..
went back to the standard gear knob.
got a welded center sitting in the shed..
got 2nd hand nardi with quick relese..can't get my old wheel off shit allen key bolts stripped.. shit just jap shit.. lol
umm.. still have quads jdm beaver pannel and now have t18 bars.
madhouse lip.

still waiting camber tops n strut brace from ajps.. 2 months :(
just waiting for some free time.. what eva does not end up car will probbaly sold..


yep........ love my car.. my car loves my wallet... :(

MountainRunner
6th June 2008, 11:45 PM
front guards look tuff how did you go about doing them!

Sherlock
6th June 2008, 11:58 PM
Holy...Shit you have a lot of rims. Lets see the MKII's!

dunga70
7th June 2008, 06:39 PM
rolled.. with hammer and dolly n shit.. then pulled out with pliars.. they look good from far but far from good lol.. its noticeable if u look closeish thre is scratches and little dents.. then they were cut down the front as ya can see in the pics.. cause i tired to put 15x7,5 on and they were so wide they didnt clear the gaurd.. now rolling on the 14x6.5 reverse mesh and 13x7 hotwires on back.. as for the mkll's they sitting down stairs wating for a pair of 185/60/13 or something.. or something bifgger with no strech if they go on front.. if they don't suit or i can't do nething with them they will be up for sale..

dunga70
7th June 2008, 06:47 PM
yummy ssr mk2.. 13x8 0 offset..
pretty sure they are reversable too. :crazy:

Sherlock
7th June 2008, 07:16 PM
WIN! Lets see em on the car!

dunga70
7th June 2008, 07:41 PM
what size tires ya recon?? 185?? don't think i go any smaller bigger on back.. but would do the full 205 if i threw them on the front.. wis 205 about the right size for 8'?? what ya boys recon mkll's on front or back??? will get some pics up of the diff rims if i get time tomoro.. and a couple pics of the new diff goin in.. also might get the quads on tomoro if i get come time.. if I'm curising though ill throw the t18 bars on... the front is bolt on but the rear needs modifying.. unsure what i gotta do yet.... if the quads n bars do not suit the car they will also be for sale :D need to save money..

Todd
7th June 2008, 07:50 PM
might be interested in the quads seeing as i have a jdm beaver sitting round the place.

let me know how much you would be chasing jay.
thats if u do wish to sell them anyway :D

those mk2s are dope if only 14" !!

bkh808
7th June 2008, 08:34 PM
http://www.ae86drivingclub.com.au/board/uploads/post-4487-1206658534.jpg

What kind of wheels are those in the rear?

Todd
7th June 2008, 08:46 PM
commonly known as 'jellybeans'
:) they are pretty common wheels so shouldnt be a problem finding any if ur looking

bkh808
8th June 2008, 10:30 AM
I did a seach but i couldnt get much out of jelly bean rim. I live in America, is there anyway I could buy them online? or get the name to the brand?

marvis
8th June 2008, 10:56 AM
175 on 8's on the rear ftw. be looow.

dunga70
8th June 2008, 05:16 PM
yeh jellybeans lol still got them in the shed.. lol 14x7... they are pretty common over here.. only worth 50 or 100 a pair.. lol depends who u gettin them from lol or free in my case lol ...
as for the work today.. ahhh got home at 1030 or somthing dad was out.. so i couldnt bleed the brakes. so i didnt bother putting the new wheel cylinders in.. and i didnt touch the quads or bars.. changed the old coil over tho.. apart from that.. tomorow morning it should be sliding around lol

Clinton
10th June 2008, 01:29 PM
hook yourself up with the new diff already.....

dunga70
10th June 2008, 06:10 PM
its running way too good now to pop a locker in.. old man was spewing when the open diff blew... still have not pulled it apart so i dunno exactly what happened.. gotta stop spending money on her..

dunga70
24th June 2008, 11:53 PM
mm the 15s will be up for grabs soon.. was holding them for a mate but hes not replying.. so when I'm ready they will be 700 firm for the pair of 15x 7.5 ssr reverse mesh *mint* 0 offset... with near new tires..

dunga70
27th June 2008, 06:19 PM
update- spent a few hours day.. ripping it apart and puttig quad lights on.. pics below.. also was goin to put on t-18 bars. was told the front was direct bolt on... however it is not if you use a jdm beaver pannel.. so i got quads.. but no chrome.. yet i guess... atm i just hooked up the outside lights. i will get around to wiring up the center lights... anywho i took some pics.. only really started taking photos one it was all apart.. anyway let me know what you think... all the little clips become a bit of a c*nt after a little while

dunga70
27th June 2008, 06:33 PM
couple pics from this arvo after doin the light conversion..

Sherlock
27th June 2008, 09:23 PM
Win! Car looks sick. Your car colours growing on me everytime I look at this thread :lol:

Konakid
27th June 2008, 11:05 PM
car looks thug, nice work.

ke70dave
28th June 2008, 11:44 AM
gee man!

that looks really good!

don't think ive seen this thread before, so thought id comment!

loving the brown, and that black strip along the doors just set it off really nicely with the black centers on the wheels.

keep up the good work :2thumbs:

dunga70
29th June 2008, 07:31 PM
now has exhaust leak.. and rear shock has leaked all its fluid out.. so gonna take off the manifold cause ithink thats where is leaking from.. if its mjust the gasket ill put a new one on.. but if the mani if cracked of somthing probably get some extractors... i love it when it works.. i hate the slut when she needs part... might look around for some trd blues to replace the broken sierras. or maybe another pair of sierras...

dunga70
2nd July 2008, 09:06 PM
exhaust leak fixed with extractors.. makes a little different in performance.. but louder too.. sounds more racie now... the shock still not fixed. looked under it today.. shock now in 2 peices.. lol the bottom where it bolts to the diff is still there but just about where it was welded to the shock bore thing like the tube.. it ripped that weld lol getting another 2 tomoro hopefully. gotta re do all the vacume hoses too...

dunga70
20th July 2008, 09:03 AM
new sierras in the rear.. also now running 14x7 0 offset watanabes on front. thinking of puting ssr mrll's 13x8s on the back with heavy stretch...
dunno if it will look any good??

Clinton
20th July 2008, 09:06 AM
were did you get watanabes 14x7 -0?????

ive been looking for them for ages!!!!!!!

dunga70
20th July 2008, 10:24 AM
dude u know how i am with rims.. i always buy 0 offsets. they were for sale for a while on here... got them for 350 to my door... and they now have 185/55/r14 fedrals on them.. with a slight stretch.. had to sell a couple rims and the semis to make room for these.. who does tires stretching in the shire?? like 185/60/13 on a 13x8 rim???

Clinton
20th July 2008, 10:43 AM
theres a place on i think taren point road down past straithfeild car radios towards rockdale, like 50 metres down from shire clutch and brake on the other side of the road.

dunga70
20th July 2008, 11:29 AM
sounds like ur descriscribing jobsons or beau repairs.. lol umm.. i heard the mobile servo mechanic at kirrawee do it..??

don't you have a apir of 14x7 watanabes clinton?

dunga70
9th August 2008, 06:37 PM
k now has a sparco drivers seat, strut brace... and camber tops.. 1st brace didnt fit.. then got the right one.. and upon putting it on snaped a stud on week old camber top. very angry.. will replace stud tomoro with bolt... was told they wind out.. pretty dark pics,..

dunga70
28th August 2008, 06:36 PM
studs on camber tops have to be pressed out.. put a stock 86 one in bit short but holds...