Wheel fitment pics with details

[ke70dave]

hey folks

to counter the continual asking of questions such as

"what will 15x8 zero offset look like on my hachi"

i have devised a cunning plan...

basically i would like everyone to post up a picture of their wheels on their car with details of the modifications done.

LIMIT OF ONE PICTURE PLEASE. and AE86 and KE70 only

even if you have 13x5.5" + 30mm, so long as its not a stock wheel post it up. i would like a large range of information.

i need a picture that shows the following:

-show how close the wheel is to the edge of the guard
-show how high the car is off the ground (ie where the tyre sits relative to the guard)
-no turned wheels, steering wheel straight ahead (cheers Meathead #2)
please no pictures using wheel spacers.

please only post of rear fitment with STOCK differentials (S series,ke70 borgwarner, or T series) (no hilux/torago etc diffs please)

i have come up with a simple way that i would like you all to post

FRONT WHEELS

please include picture with the following details

-car (ke70 or ae86)
- wheel size (eg 15x8)
-offset (please be exact with this)
-Tyre size
-Lower control arm in use
-Camber (if using stock camber tops with longer control arm please say so)
-work done to guards to make them fit if applicable

REAR WHEELS

please include a picture with the following details

-wheel size (eg 15x8)
-offset (please be exact with this)
-Tyre size
-work done to guards to make them fit if applicable.

oh one last thing informative posts only

also if you see someone who has posted exactly the same setup as your car, you might not need to post, ill let you be the judge of this :2thumbs:

thanks guys

[samuel]

offtopic will be deleted. Post as per guidelines or recieve a warn

[federal]

Front:

14x7+11 Uknown with 185/60/14 A021R, Std Guards, Std control arms, Unflared guards, leaves about 10mm clearance
http://i86.photobucket.com/albums/k108/Auste72/DSCN0978.jpg

14x7+3 Performance Challenger with 185/55/14, Flared Guards, Corona Control arms, leaves about 30mm clearance
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/169837.jpg

15x8-9 Performance Challenger with 195/50/15, Flared Guards, Rose-Jointed control arms set to 20mm longer than std, Camber tops set to 3degrees negative, leaves around 20mm
http://www.ae86drivingclub.com.au/dcimages/0/2555.jpg

Rear:

MA61 Stockie, 14x7+8 with 185/60/14, Rolled guards, leaves about 12mm clearance
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/169839.jpg

15x8-9 Performance Challenger with 195/50/15, Heavy Rolled, slight outward push, Leaves about 8mm
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/167601.jpg

15x10-26 Performance Challenger with 195/50/15, Pipe Flared UNCUT Guards, leaves about 4mm clearance
http://i86.photobucket.com/albums/k108/Auste72/DSCN0724.jpg

[Konakid]

Very good idea for a thread! we needed a wheel fitment thread, but make sure that the pics are actually worthwhile posting and the way the rim sits can be seen clearly, i.e no turned wheels, side on angles, etc. Will get some pics up now.

Front

14x7 +8 with 8mm spacer (14x7 +-0)
185/60
-1.5 camber (stock strut tops)
10mm longer lca's
rolled guard (sat dead even with the guard line)

Rear

14x7 +11 with 5mm spacer (14x7 +6)
185/60
rolled and slightly hammered guard (+5mm)

http://media4.dropshots.com/photos/482871/20080512/212152.jpg


Will get more pics up when new wheels arrive and guards are done.

Hoping 741 can come through with the ae86 fitment pics!

[ke70dave]

cheers for the reply's guys

hey kona kid, the pics don't seem to be working

sais something like "this image has been moved or deleted"

BTW i tried to type kona kid as one word and it changed it to "meathead #2"

someone is playing silly buggers...

[Konakid]

I'm on it, fucking photo bucket... hasnt worked for weeks, yeah thats Nick, its hilarious.

[ke70dave]

any more takers...?

[drft86]

[attachment=25782:16032008.jpg]

15 x 8 -3, with 25mm spacer (-28)
195/50/15
ke70 guards flared and welded on

[Konakid]

AE86 (Amuldays Car)
14x8JJ -14
185/60's
Stock rear Guard

http://www.ae86drivingclub.com.au/dcimages/1/5/8/896.jpg (http://img87.imageshack.us/my.php?image=dscn2419pl5.jpg)

[ke70dave]

absolutely perfect picture kona kid!

keep them coming guys, I'm about to post them all up on the FAQ

[driftke70]

front 14 x 8 -16 185.60.14 semi flare, standard + 20mm lca negative 10mm clearance
rear 14 x 9 - 20 195 60 14 semi flare negative 20mm clearance

[hatstand]

15x7" superlight +12, 205/50/15 hankook ventus k104s, std guards, kings springs, std front end.
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/170017.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/170018.jpg

[drft86]

JUST WANTED TO POINT OUT..

Some tires stretch way more then others and clearance can and will change dramatically

ie

195/50/15 "on a 8" rim" potenza g3 has so much more clearnce in guards then the new re001

[Konakid]

Agreed, re001 doesnt stretch for shit :(

[ghetto ke]

<div class='quotetop'>QUOTE (Meathead #2 @ May 15 2008, 05:00 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=531510)</div>
Agreed, re001 doesnt stretch for shit :([/b]

http://i148.photobucket.com/albums/s15/karolex147/PICT0307.jpg

Stretch looks OK to me :teehee:


Front: 15x8.5 -21, 195/50R15 RE-001, Origin +20 FRP guards (-2.5^o OEM LCA)

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/170023.jpg

http://www.ae86drivingclub.com.au/dcimages/1/1/1/9/3803.jpg


Rear: 15x9 -2, 195/50R15 RE-001, rolled lip (T-Series discs)

http://www.ae86drivingclub.com.au/dcimages/1/1/1/9/3806.jpg

http://www.ae86drivingclub.com.au/dcimages/1/1/1/9/3805.jpg


Will find better view pics of 15x7 +3 195/50R15...

[Konakid]

Oh they stretch for sure but the sidewall doesn't really pull that tight like the G3's did, probably due to them not having a lip protector.

[slydar]

http://www.ae86drivingclub.com.au/dcimages/1/8/553835.jpg

15x9 -13 195 50 ns2 (quite a wide shoulder on these)

corona xt130 strut

sigma control arm (1 piece version, +30mm)

cusco tops set to max camber (4* + at a guess)


dunno how useful that really is but can't hurt.
fully flaired guard (hard to go much bigger without cutting/heat)

[slydar]

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/161426.jpg

14x8.5 - 2

185 60 (yokohama c drive.. or a.. the good ones.. kinda rounded tread profile, doesnt look super nice stretched)

s series drum

inner lip folded back (not flush, but pretty far).

fits quite easily.

[slydar]

http://www.ae86drivingclub.com.au/dcimages/1/8/553507.jpg

14x7 +4

tyre as above.

offset rca. (t3, 25mm offset)

tops set to neutral.

lip folded back dead flush, guards not flaired, just outer pushed out around 10/15mm.. fits easy.

[slydar]

http://www.ae86drivingclub.com.au/dcimages/1/8/553863.jpg

http://i8.photobucket.com/albums/a31/slydar/IMG_0008copy.jpg

14x8 watas all round (youll have to check the offset on the watanabe site, it will be around -6)

25mm offset rca

flair front, lipped rear - hammered out a bit.

pretty easy fit. some rubbing, really nothing to worry about.

import tyres, can't remember brand, 185 60 14.

[slydar]

http://www.ae86drivingclub.com.au/dcimages/1/8/8311.jpg

14x6.5 wata (again check site, around +15)

sigma arm (1pc)

lipped guard. camber -3.5 ish. 185 60 G3, no rubbing at all.

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/93640.jpg

rear, one 7.5, one 6.5 longchamp, can't remember offset, fitted ok with the PH bar adjusted right LOL.

[slydar]

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/87261.jpg

15x7.5 - 5 (ssr reverse mesh, must be the most common imported 15" ssr wheel ever)
sigma arm (1pc)
3.5 -ve
flaired guard.
rubbed quite alot but i dealt with it.
some shit house 195 50..

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/87263.jpg

15x8.5 +20 w/25mm bolt on.

195 50

sorta stock lipped guards.

i say sorta cos they were rusted to fuck and repaired in an "interesting" way (cheers j panel shop)

but size will fit without a flair.

in all these posts, I'm sure all my wheels cept the froms on the 70, rub a tiny bit(unless otherwise noted), but nothing you should worry about if youre not a pussy.

should also be noted if you intend to run FRP front guards (or rear) or over fenders.. then you should run more clearance, especially on the front, or they can end up getting damaged (READ, blown to pieces) pretty easy.

[slydar]

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/174327.jpg

13x8 + 4, 185 55, all stock no lipping.

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/170087.jpg

13x7 hot wire(offset un known, only come in one offset i think in x7 114.3)

tyre as above, stock arm, no rca, slammed (can you say bump steer) no rubbing.