PDA

View Full Version : Fast eddies no3 ke70 siiiiiiiiiiik



FAST EDDIE
18th May 2009, 10:57 PM
update sooonnnnnn

70wagon
18th May 2009, 11:03 PM
omg... what now? lol i herd u should put a 1j in a ke70 lol

Sherlock
18th May 2009, 11:03 PM
Uh-ohhhhhhhhhhhhhhhhhh :)

ke70 xx
18th May 2009, 11:05 PM
I like the sound of this. Drift pig for the win. I like the sound of 1j. Or 2j.

dehney
18th May 2009, 11:10 PM
i say you should make it a 4wd so u can get around ur back yard haha

70wagon
18th May 2009, 11:16 PM
lol ^^

FAST EDDIE
19th May 2009, 04:03 AM
haha dehney lucky urs was 4wd

dehney
20th May 2009, 07:29 PM
haha dehney lucky urs was 4wd

haha yeah indeed well cant wait to see what u got planned for the new beast

FAST EDDIE
20th May 2009, 09:00 PM
stuck a diff in it yesterday and fired it up,no fuel tank so degreaser from the drivers seat down the carby,,,,!!!! well it started, threw something out of the fan lol and uuum ran for 10 secends with bits of the bottom end floating around and locked solid!!!!

FAST EDDIE
27th May 2009, 09:24 PM
well ahvent done fkall on it yet but heres a pic to get people excited!!!

ke_70
27th May 2009, 09:29 PM
lol how long u rekon? guna keep this 1?

driftke70
27th May 2009, 09:35 PM
mmmm, perky

FAST EDDIE
27th May 2009, 09:35 PM
dunno it will be mint tho not a slow 4a

70wagon
27th May 2009, 10:39 PM
damn u and your sr's ... give me one lol
u look happy

ke_70
27th May 2009, 11:10 PM
hes fckn lovein it!!!!!!! is it just me or doesn't it hav a roof is this guna b a sik convertible drifta??? makin me exited

FAST EDDIE
27th May 2009, 11:17 PM
looking for some s13 front coils let me kNOW peoples
11111

ash86
27th May 2009, 11:29 PM
import spares 550 :p

FAST EDDIE
27th May 2009, 11:38 PM
already sussed em not base height adjustable!!!!

slide86
28th May 2009, 01:20 AM
i got some hks hyper d's. not base adjustable tho

FAST EDDIE
28th May 2009, 03:04 PM
HOW MUUUCH MAN, canu measure from top hub hole to top of cambertop so i can see how low they are?

FAST EDDIE
30th May 2009, 01:00 AM
Well made some progress tonite, sr is out of the halfcut and whole thing is stripped! clutch is standard :worried: mite put it back in dunno tho its heavier looking thtn my 180 blactop clutch so mite be heavier fk nose will way upfinances on that!!!
sr gearbox is forsale minus bellhousing!!!
knew it had a t28 turbs but was excited to see it was the ballbearing version!!!!

70wagon
30th May 2009, 06:30 PM
wer do you find all these ke70s'? find me one lol

FAST EDDIE
30th May 2009, 07:45 PM
haha just lucky i have a yellow one in my backyard lolol

also got a NISMO clutch slave!!!!!

driftke70
31st May 2009, 01:42 PM
god damn i need to finish mine

70wagon
31st May 2009, 07:31 PM
ur not using my old peice are ya?

FAST EDDIE
31st May 2009, 08:04 PM
nar man i got aonther one

FAST EDDIE
1st June 2009, 09:24 PM
got a new clutch as std sr clutch fails haha extreeme of course!!!

mite aswell keep a running budjet on this one too cos this one will also be a cheapie!!!

as my other ke owed me $586 and i sold it for more than that i have still been working off the profit from the other one.

so as it sits i have a ke70, sr20, t28bb, extreeme clutch, nismo wheelstuds + clutch slave and ow3es me $686

ke_70
1st June 2009, 09:46 PM
do u just hav random sr turbos sittin around or somethin? $600 bux!!!!!

Simon-KE70
1st June 2009, 10:51 PM
im thinking bout selling my s13 front coilovers eddie, custom made ones with 6 kg spring, TRD blue inserts and HKS ae86 camber tops.

pm me if ur keen

FAST EDDIE
2nd June 2009, 03:25 PM
wasnt the half cut $3000?


HAHA yer but i made more than that much on the ke that owed me $586 so it was profit!!!

dion_jay
2nd June 2009, 06:51 PM
scary thought

driftke70
2nd June 2009, 07:16 PM
after this build you will learn the secret within the ke shell.

FAST EDDIE
2nd June 2009, 08:46 PM
That i can let my missus drive it smash it and wont care cos they are dime a dozen?? Although it was cool drifting with the rear windows down!!!

FAST EDDIE
4th June 2009, 07:56 PM
entire car is stripped minus steering wheel, ready to go to jays for full rollcage!! f series diff will be in the pipeline too!!!

buddyparts
4th June 2009, 08:06 PM
and we are ready for you we have your seats in and belts c you tomorow

FAST EDDIE
4th June 2009, 10:53 PM
^^^^^^ buddy parts is winner wouldnt buy parts from anywhere else!!!!

i want one of them window stickers for my ke!!

driftke70
4th June 2009, 11:52 PM
That i can let my missus drive it smash it and wont care cos they are dime a dozen?? Although it was cool drifting with the rear windows down!!!

http://upload.wikimedia.org/wikipedia/en/4/4e/Rafiki_TheLionKing.JPG

look closer...



nar but seriously, once your done, take it for a drive, your last one wasnt close enough to your 86, but once you drive this youll see. not trying to sound wise or anything,

also if you finish this before me, could you please send some motivation and money, i can pm you addy, ill pay for postage.

FAST EDDIE
5th June 2009, 12:02 AM
yeah will be good to see compaeison between em an dwill be able to try all the little things i wanted to in my 86!!!

FAST EDDIE
7th June 2009, 06:51 PM
have done a bit of work, took it into work and steam cleaned th eentire car underneath engine bay inside and have got 95% of sound deadner out, new velos and harnesses arrived which are sweet is and have a 4.77 f series centre and am in discussion with Anthony @ KZG about another one of his mint torago housings!!! still looking for s13 coils for the front!!!!

Steam cleande engine and s13 xmember, s13 xmember will be modified to move steering rack fowards to stop the binding as it looks like it will go about 40mm and then will easily do backwards entries!!!

350hp4agte
8th June 2009, 12:20 PM
thats different way of doing things wph&s at your work must be serious bet you have to were steel cap thongs to

corknose
8th June 2009, 03:16 PM
haha the bucket is alwost lifted off the ground

FAST EDDIE
8th June 2009, 08:40 PM
haha yeah not a very heavy shell, lucky my gf was there to put the tire under the car lol, all sound deadner removed and cleaned, spoke to Buddyparts and will be taking ke down there fri 19, will be seam welded before then and new rad support fabed and welded on!!

ke_70
9th June 2009, 12:56 AM
wot r u doin with this? bit of fun 4 the drift pracs? replacing the 86 surely not? or a free track spec drifta 4 the gf?

dehney
9th June 2009, 02:29 AM
sounds like this is going to be a mad machine eddy

70wagon
9th June 2009, 08:02 PM
its definetly for the missus right?

FAST EDDIE
9th June 2009, 08:11 PM
lo cant have her driving a shiz box slow 4a ke70, needs to be tough

70wagon
9th June 2009, 08:13 PM
thats exactly what i was thinking lol

ke_70
9th June 2009, 10:18 PM
can i be ur gf?

FAST EDDIE
10th June 2009, 08:38 PM
she has her own s13 blactop turbs makes 175kw on 10psi, none of this under 100kw junk haha!!

FAST EDDIE
14th June 2009, 08:06 PM
did a little work on saturday made the radiator support that i can unbolt, for easy engine removal lol and S13 radiator mounts. seam welded the strut towers and along the chassis rails not very much as i know hom much the fronts of 86's ke's move even when completely seam welded.

FAST EDDIE
15th June 2009, 10:03 PM
Chopped out the rear boot floor as it was rusted as faaark and i will be mounting the fuel tank and surge tank and pumps in the boot so didnt need the floor!

welded some bracing inbetween the rails for a bit of strength (moreso we can sit in the boot when it spinning up on the dyno lol) bent up the sheet steel and glued and pop riveted teh section in, i rivited it instead of welding it because it is hard to seal and weld thru and also it will be easily removed iiiif it has to! much more happer with the result compared to my green 86!

obey wan boenny
15th June 2009, 10:12 PM
Nice eddie, coming along good. your gf and i can do tandems :P

FAST EDDIE
22nd June 2009, 07:41 PM
engine has sr/rb20 gbox and extreeme clutch bolted on, found it already had a lightened flywheel on efffn sik.

did soem custom work on the engien xmember to make it work better as s13 steering knuckles hyper extend and u end up locking wheels a full lock. I moved the rack in my 86 fowards and did the same thing with the s13 rack for the ke70!! 20mm fowards

marvis
22nd June 2009, 07:51 PM
Love your style.

lol @ the shell and how it is resting on the window.

lumpye7
24th June 2009, 12:22 AM
yo man.. its lumpy! with the black thrashworks keto.

looks sick man! lovin the braces! :D haha

u say binding issues with the stock rack an position? iv got a stock rack and crossmember in my keto. as i was showin ya on the weekend. iv only noticed binding when i reverse on full lock.

looks the goods man!

see ya out there!

FAST EDDIE
24th June 2009, 07:20 PM
yer around malla doesnt seem to be an issue but with the rack moving the full operation with the knuckles give alot better steering feel the whole way, also around turn 2 my car gets a much better line thatn before and i can hold it flat going real fast at full angle tight around the ripple strip where as it washed out tot eh side of the track too before.

the real killer for binding issues was queensland raceway, my car almost stopped on teh spot and was a head fk to drive, you can deal with it but fixing it makes it alot better to drive

slidwayz
24th June 2009, 11:00 PM
nice build up mate im keen to do one of these up soon when cash says so

lumpye7
24th June 2009, 11:21 PM
alright fair enough...

might have to do that then next time the motor is out.. lol.

how far do u need to move it to be noticable? just so the rack ends are as straight as possible on full lock?

u goin out to mallala for track time any time soon? would be cool to have a batlle :thumbup: see how far behind the ball i am haha

RyGuy86
25th June 2009, 01:55 PM
engine has sr/rb20 gbox and extreeme clutch bolted on, found it already had a lightened flywheel on efffn sik.

did soem custom work on the engien xmember to make it work better as s13 steering knuckles hyper extend and u end up locking wheels a full lock. I moved the rack in my 86 fowards and did the same thing with the s13 rack for the ke70!! 20mm fowards

^^^ do you always work with Pink oil rags?

FAST EDDIE
25th June 2009, 10:20 PM
alright fair enough...

might have to do that then next time the motor is out.. lol.

how far do u need to move it to be noticable? just so the rack ends are as straight as possible on full lock?

u goin out to mallala for track time any time soon? would be cool to have a batlle :thumbup: see how far behind the ball i am haha

ill be scared man ur a mad kent haha will be out soon hopefuly,,, will definately b out for the next prac, it has to be my gf is driving it!!!

FAST EDDIE
26th June 2009, 10:36 PM
Engien x member is finished, looks mint, got a greedy coppy chinee manifold cos the s13 inlets are homo and go up down and around when they just need to go in!!! Also got some engine mounts solid alloy isnt cheap!!

KKUSTOM
26th June 2009, 10:56 PM
looks minta good luck man

FAST EDDIE
29th June 2009, 07:32 PM
made up a jig of my jappy shortened knuckles out of my 86 and made 2 sets of shortened knucles which i have tested and know they work killer!!!! Had a lesson on welding cast steel from a mate who is a pro welder had nfi it was that involved!!

--Redwork--
29th June 2009, 10:17 PM
Preheat. weld, back grind. weld weld weld... heat rap...

Lots of fun...

JUG-HEAD
30th June 2009, 10:36 AM
cast iron welding is gayer than aids, hate that shit

FAST EDDIE
30th June 2009, 07:27 PM
they *look* ok test will be on the track lol aaaahhhhhh

painted white for easy crack spotting :)

ke_70
10th July 2009, 12:15 PM
any updates man?

FAST EDDIE
11th July 2009, 10:31 PM
yep cage is in progress will be checkin it out tomorrow, f series diff is being done tis weekend hopefuly then bolt it all together line everythign up mout all the parts and rip it apart again to paint the whole thing!!!

ke_70
11th July 2009, 10:32 PM
cant wait

FAST EDDIE
14th July 2009, 09:59 PM
picked up my car 2day from jays with a complimentary lhr door thanks mate, this cage nick and jay built is effing sick the front legs are welded to the a pillar the cage is right up in the roof and teh welding is second to none, will get pics tomorrow!!!!!

obey wan boenny
14th July 2009, 11:07 PM
sounds good eddie, ke might turn out better than your ae86 lol :P

70wagon
15th July 2009, 07:25 PM
is this going to be another bright green edition to team fast eddie?

FAST EDDIE
15th July 2009, 09:58 PM
yes it will probably be better than my 86 haha ive been through everything with that, know what will make it perfect the first time!! Yes it wiil be another edition to team Fast Eddie!!! Ripped the ke70 front end out tonite the s13 engine xmember went it with about 3mm grinding of the holes, wouldnt have believed it if i didnt see it with my own eyes how madness being that similar!!!! dropped the engine in and with no firewall modification the engine fits straight in WTF double madness!!! like it was meant for it!!!
the greedy manifold hits the brake booster so ill probly just dump the ke30 brake booster in s13 steering column isnt gonna be too hard to modify to fit in!!! instant 1990's s13 characteristics in a ke70 effing siiko! i also picked up a koyo s15 radiator! Spoke to jay he and nick will be making my fuel tank surge tank rad overflow and oil catch can!!!

FAST EDDIE
15th July 2009, 11:09 PM
I just saw there is only 12 weeks till it has to be on track for testing!!!

Sherlock
15th July 2009, 11:26 PM
Saw Nick slaving over your cage, so mint. Jay was bragging about it haha. You'll have to bring it by Buddy Parts when it's done, one day I'm there :)

FAST EDDIE
17th July 2009, 08:07 PM
so checked the ke30 booster and the bolt line up but they are too short to go through the ke70 pedalbox as it has spacers, so i pulled it apart and removed the studs and will weld in longer studs, th s13 steering column has been put in but is abit of work to get it to fit correctly! The greedy manifold is making life a little harder but will work around it!

after the weekend hopefuly the brake setup will be sorted, the steering column will be fitted and the clutch master inside the car designed!

driftke70
18th July 2009, 01:16 AM
im running a trophy truck style inboard clutch on mine, made more room, got it from car tek in california, not too exy.

FAST EDDIE
18th July 2009, 11:45 PM
oh yeah sounds good, ill just make one its easy enough, after alot of beverages went down on fridat nite and meeting half of 86dc, didnt get much work done today, booster is done that is all lol

Matt-AE86
19th July 2009, 03:30 AM
Why not mark the manifold. Take it off. Lop it, and have a flat bit welded on.

FAST EDDIE
19th July 2009, 04:43 PM
i could have but why modify the manifold when a ke30 booster fits in?

heres a bit of inspiration...........

FAST EDDIE
21st July 2009, 10:49 PM
did a bit more work tonite *hopefuly* shel wil be finished to paint after friday as i have it off!

mounted the s13 steering column in place with only a little modification and made the clutch master setup using a ke70 manual pedalbox, turned out brilliant. Where i put the hole for the plunger pin is a little high on the pivot point of the pedal and u get a full movement of the master with 3/4 of teh pedal movement!!!

FAST EDDIE
25th July 2009, 06:30 PM
I took yesterday off work and spent all day at work on the ke, made a provision in the firewall for the dump pipe as it was either that or have a new manifold made and doing ti this way cost me nothing, wleded the s13 firewall section to the ke firewall so the steering column seals and fits perfectly welded up the aircon and heater hoses holes and all teh other useless holes in the firewall.

spent today putting in all the steering and sus and mounting the front end on, found out my 15x7.5 -5 rims are a little too big for the guards so i tried a 15x7+22 on and that was a little more friendly. mounted the h-lights and the bonnet and chopped all the inner reinforcing off the bonnet.

before it goes to get painted i need to make seat rails and seal the boot area off which i will do next week

FAST EDDIE
27th July 2009, 10:19 PM
Mounted the drivers side VELO tonite was alot of work with the bottom only mount setup but it is a farkn comfy seat and is a much better shell with driving perspective than the 86

driftke70
27th July 2009, 10:26 PM
http://billcammack.com/images/morpheus.jpg
hes beginning to believe

--Redwork--
31st July 2009, 01:38 AM
LOL at driftKE70...

FAST EDDIE
6th August 2009, 07:29 PM
car has been completely stripped ready to be painted inside and outside looks good got rid of fuel lid on rhs quaterpanel

--Redwork--
7th August 2009, 05:34 PM
Hey Eddie...
Builds looking good man...

Reguarding your clutch pedal setup.. I did a very similar thing in my old sr20 datsun 1200.. And it would countinually bend/twist the pedal. No matter what I tried... The top section of the pedal ended up being about 16mm thinck with all the extra bracing I put on it and it would still twist.. Ended up just fitting a wilwood pedal set..

obey wan boenny
7th August 2009, 06:20 PM
Cool Eddie, looks like its coming along well. will be good to see it finished :)

FAST EDDIE
8th August 2009, 12:23 AM
hmm interesting, i guess weel see how it goes, i have a similar setup on my hb in my 86 (similar in teh offsett leverage) with a long handle that gets reefed on and is only made of 5mm steel so i dont see this being an issue but i guess with everything custom made weel see how it goes!! thanks for the info redwork

Simon-KE70
8th August 2009, 12:28 AM
had no issues with mine... in fact i rarely used it.

edddie ur KE is far more advanced then what mind was....

FAST EDDIE
8th August 2009, 09:28 PM
what u talking about simon haha? u talking about hb, the issue was how ive made my clutch setup?? have a look at the pics see what u reckon?? and also did u run lock spacers seeing u didnt sms me back ahah??

Was at my mates place till 1030 last night and all day today, all the panelwork is done the boot area is sealed off with alloy sheet, the engine bay is primed and the plan goes prime all outer panels and shell, paint all insides of doors and inside of car and boot area, paint outsides of panles and shell cant wait it will be miiiiint!!!!

Simon-KE70
8th August 2009, 09:32 PM
sorry mate no credit atm... prob see ya tonight anyway at so and so's gathering.

yeah i did run spacers. only cause they were already in the rack i got!

nice work on the car man its shaping up to be far better then the one i built lol

Beau
8th August 2009, 09:35 PM
looking good!!!

FAST EDDIE
11th August 2009, 08:42 PM
Been flat out working on the ke the entire exterior of the car is primed up, the inside has been painted white and looking clean as fk and crispy new, 2morrow the insides of all the panels will be painted!

REDWORK: i reinforced teh clutch pedal with 12x30mm steel that makes it overall 17mm steel so i think it shall be strong enough lol thanks for the heads up tho mate!!!!

Going to plan teh whole car will be painted friday and start to get together next week!!!!!!

Waiting on my alloy parts and diff atm otherwise its all ready to go together!!!!!

FAST EDDIE
12th August 2009, 10:33 PM
Finished seam welding and reinforcing teh pedalbox today and the clutch setup, the inside of the doors are painted and teh body will be painted 2morrow!!!!

Sherlock
12th August 2009, 10:48 PM
Another green machine! Lovely.

RyGuy86
13th August 2009, 09:42 AM
sweet. But how can you drive 2 cars at once?

FAST EDDIE
13th August 2009, 10:37 PM
didnt do any work tonite but got a sneak peak from my mate thats painting it for me!!!!

2morrow im going shopping!!!

exhaust tech for cooler pipes an exhaust
outlaws for air filter an dspeedflow fittings
car torque for swaybar and trailing arm bushes
complete windscreens for windscreen
power brakes for clutch master ans hb master
cbc for hoses
sleeka spares for s13 lock spacer
u gank it for window and door handle

ke_70
14th August 2009, 12:05 AM
fck me he does a good job
i might check this out soon its starting to get a rep had a few people tell me about it

FAST EDDIE
15th August 2009, 06:59 PM
yeah he does!!!!! seen u 2day in tanunda thort u were keeping it stock?? haah!

ke_70
15th August 2009, 08:12 PM
couldnt help myself lol i also said id stop gravel skids 2:P
meh ill just keep stayin off main roads 2 months only passed 1 cop
buying another 1 soon anyway

FAST EDDIE
15th August 2009, 09:24 PM
heres a pic

ke_70
16th August 2009, 04:24 AM
jds fkn huge now

green_boy_91
16th August 2009, 10:58 PM
lookin good man! very nice paint job! i painted my mates turbo laser in that green a few months ago and just looked hidious but looks and suits ke70 awsome! :)

lumpye7
17th August 2009, 11:27 AM
oh....my....god.

this thing is killa. lol

havnt seen the thread for ages man. looks the goods!

makes me wish i did a better job that rattle can special now.. :(

well done!

RyGuy86
17th August 2009, 11:32 AM
Not bad! not bad at all!

FAST EDDIE
17th August 2009, 07:17 PM
cheers guys not sure if the colour suits it or i like it but its my colour so thats the way it had to go, got the panels back on on saturday, and the x member and ps lines and resevoir, found one rack end was bent the fker so picked up a new one 2nite and a poly urethane s13 steering column universal joint bush to replace the shit rubber one!!!

alot more progress during the week to come, engine will be in as long as re tappping the turbo oil feed line in the block goes ok! spoke to jay and all the alloy units should be happening soon.

Still waiting on ant from KZG as to when my diff will be sent down.

gota new whiteline rear swaybar, k+n pod new windscreen speedflow fittings for the 044, clutch master hydraulic hb master, uras lock spacers, all the piping for the cooler, dump and exhaust, trailing arm super pro bushes.

FAST EDDIE
18th August 2009, 10:25 PM
so oil line re threading didnt happen at all, using a modified snap-on thread chaser lol, will buy a tap 2morrow haha!

S13 steering column in pedals and clutch and front brakes in, steering and front suspension dont aswell. more tomorrow!!

FAST EDDIE
20th August 2009, 08:50 PM
went and seen jay today and picked up my cooler, and saw his dirty kfc 86!!

engine went in today just doing all the little bits n bobs now!!

Jay said he will have all my alloy bits finished tomorrow so wont be too far away........ hahahaha

buddyparts
20th August 2009, 10:18 PM
your car looks so good
and yeah i will finish you parts soon ish

RyGuy86
21st August 2009, 03:13 PM
^^ you will or Nick will :P
Buddy parts FTW -

Edward- SR's are gay. needs more rotor :P

FAST EDDIE
21st August 2009, 10:12 PM
Got a whole heap of fk all done tonight, half drilled out the farked stud in the turbo got angry and went to kfc, will have cooler pipes, afm pipe, and dump done tomorrow hopefuly!! if my missus doesnt kick my but lol

corknose
21st August 2009, 10:13 PM
its her car!

FAST EDDIE
26th August 2009, 11:32 PM
Its been cruising along slowly, diff should arive from kaizen garage tomorrow or friday, jay said my alloy parts will be readyo tomorrow aswell.......

cooler pipes and dump pipe done will be getting painted tomorrow with the rocker cover in morpheous metalic, made alloy doortrims and painted them black with ppg prismatec over the top!!!

wiring will begin, make accelerator cable bracket, and make a dash soon@@@!!!!!

FAST EDDIE
30th August 2009, 08:09 PM
dont have any new exciting new pictures but many hours have been spent wiring has begun!!

shift_rook
30th August 2009, 08:11 PM
it does skids right?

FAST EDDIE
30th August 2009, 08:21 PM
not yet but hopefuly, im guessing ur saying that cos of the door trims lol im a panelbeater and my mate lives around the corner from me has a spray booth so why not paint everything, its all the same as my 86

driftke70
30th August 2009, 08:46 PM
tasty

FAST EDDIE
31st August 2009, 09:48 PM
built my hydraulic handbrake tonite took me 3 hours and cost me 60 bucks! will get pics tomorrow, over engineered it a little, bit heavier than my 86 one.

FAST EDDIE
1st September 2009, 09:05 PM
the wiring has begun and got my rocker cover back and my pipes!!!!

obey wan boenny
1st September 2009, 09:39 PM
Looks good eddie, getting there getting there :)

ke55pig
1st September 2009, 09:44 PM
edie budy want to build me one mate ?

R&D Mechanical
1st September 2009, 10:56 PM
ahh eddie you stole what i was gonna do with the dash ahaha looks good dude! eta?

FAST EDDIE
2nd September 2009, 10:24 PM
i didnt like the dash at the start now it has all the gear on it looks good, ETA hopefuly 4 weeks practice

DEPENDING ON GETTTING ALL MY PARTS BUILT>>>>>>> WAITING ON OTHER PEOPLE!!!!!!

Heres a pic of hydraulic handbrake.

FAST EDDIE
6th September 2009, 07:00 PM
spent aloto of hours saturday, all the wiring is finished has headlights, tail lights, hazard lights, brake lights windscreen wipers.

ripped all the condute off the srock sr loom and with the help of an ecu pinout diagam, jazmac, and my gfs sr s13, i managed to get it all wired up and cranked it over and it firing coils and injectors so should be right!!!

I tested everything on my gfs car (by starting it and ripping sensors and wiring plugs off to see if it still runs lol) and ended up with cas, afm, temp, o2, tps, knock sensors in and coils injectors out, thats all u need to make an sr run on std ecu!!!!

Diff should be ariving this week hopefuly and may be running next weekend pending on parts getting built!

need

temp guage
adj panhard
fuel tank
surge tank
catch can
rad overflow
rad hoses
1 silicone hose
battery to master switch lead

Touge Boy
6th September 2009, 07:22 PM
Rad stuff eddie. I like it. :D

KKUSTOM
6th September 2009, 07:24 PM
i am liking the car more and more Eddie can't wait to see it in the flesh

FAST EDDIE
13th September 2009, 01:26 AM
been flat out put rear brake line in, fuel lines in, hydraulic hb installed, all wiring finished, 4.77 ratio diff welded, twin caliper brackets welded to housing, lower trailing arms painted pink ffs lol, super pro trailing arms bushes installed, diff will be painted ready to go in tuesday, should have alloy parts done soon, not looking good for drift school as money is depleating very quickly, pics up next week!!!

FAST EDDIE
14th September 2009, 10:51 PM
well decided to paint diff white, shees looking gleaming, chooch painter at work painted my lower trailing arms pink ffs, diff is in one axle in, sway bar on, one caliper on, fuel tank, surege tank, catch can will be done by end of week at a killer expense but oh well.

ke_70
15th September 2009, 12:20 AM
how much did the diff set u bak in the end inc postage n shit?

FAST EDDIE
15th September 2009, 09:17 PM
have to ask ANT fron Kazien about that man not sure on the whole price..

got the brakes on the diff, and bled them up after all these years, i learnt that the bleed nipples need to be on the top of the caliper (see sr front calipers on wrong side) must of just been flukey that i havent got it wrong before haha....

shift_rook
15th September 2009, 09:28 PM
hells farkin yeaaaaw! top shit man, take me for skids when done?

boost+k
16th September 2009, 09:47 AM
awesome... i love it

FAST EDDIE
16th September 2009, 08:58 PM
turbo and manifold went on tonite, afm and cooer pipes GLUED ON!! no issues with blowing them off!! will have fuel tank, catch can, fuel tank filler, surge tank, temp guage by monday, and should be running by next weekend!!!

dr1ft-pig
16th September 2009, 09:40 PM
just read the whole thread..... nice build eddie... top shit :)

FAST EDDIE
16th September 2009, 09:45 PM
forgot to say after this thing is finished and my gf has driven it, it shall be for sale!!

bigm
16th September 2009, 10:01 PM
lol
so much effort and then selling it

very cool build, love the mix of colours

dehney
16th September 2009, 11:54 PM
dude dont sell it drive it first and trash it hard

FAST EDDIE
17th September 2009, 07:54 PM
will definately be driving it and thrashing it before i sell it probly towards mid next year itl be for sale, but like everything it has its price!!

ke_70
18th September 2009, 05:56 PM
whats the running tally up 2 now?

FAST EDDIE
20th September 2009, 07:09 PM
uuum that got lost haha

I forgot to say, as you are npot able to buy ke70 rear windscreen rubbers new (possibly genuine but fk that for a shtbox), and mine was cracked in many places, i flogged the rear seal out of an ae82 sedan that was rolled sitting out the back of work.

The top and sides of the window are the right length but the bottom is a little to long, i just chopped it straight and butted it together which works mint!!

ke_70
20th September 2009, 10:17 PM
pics! im going to need to do that

FAST EDDIE
23rd September 2009, 09:25 PM
Went and saw my fuel tank surge tank and catch can today (cant afford em till friday) They turned out cheaper than the place that made my sprinter gear and faaark me the workmaship on the parts is farking excellent, will get pics friday!!!!

FAST EDDIE
26th September 2009, 05:43 PM
Was hoping to have it runnign this weekend but ran out of money and time. Spent over $1000 on tank surgi catch can fuel filler good quality hose clamps stainless bolts and barbed hose fittings this week!!! Mounted the other seat in, got some new brake lines made and bled up the hydro handbrake, mounted the oil catch can, mounted teh fuel tank and surge tank, both fuel pumps.
need to cut hole in tank for fuel filler and drill 2 holes in the boot floor for the fuel lines.

To fuinish it, need adj panhard bar, tailshaft and finish the fuel system and one more radiator hose!!! oh and some treads to burn, fingersd crossed engine and gearbox is good!!

DONT FORGET ITS FOR SALE GUYS

ke_70
26th September 2009, 06:28 PM
lookin good your going to take this out lala at least once right?

R&D Mechanical
26th September 2009, 06:39 PM
whats the retail on one of those?

Simon-KE70
27th September 2009, 05:41 PM
just sell the ae86 and use this as your comp car ;)

ke_70
27th September 2009, 05:46 PM
like that would ever happen lol

Javal
27th September 2009, 06:17 PM
whats the retail on one of those?

More than you can afford pal, KE70.

FAST EDDIE
27th September 2009, 06:51 PM
Im not sure how much ill be asking but itl be around the 15k mark?? simon i love the 86 too much lol. What you guys reckon?

dehney
27th September 2009, 07:03 PM
keep the rolla sell the ae86 u got way too many of them haha

R&D Mechanical
27th September 2009, 08:15 PM
Just get a nissan as you keep using there engines. haha :P or when you get a nissan toyota engine time? haha

FAST EDDIE
27th September 2009, 09:16 PM
Just get a nissan as you keep using there engines. haha :P or when you get a nissan toyota engine time? haha

youl understand when u get ur 4a on the track man they are expensive as fk to get them reliable and make anywhere near as much torque/power as the sr;)
I used to bash the fk out of the 7800rpm limiter with th 4a, keeping the sr safe doing media rides i dropped the limiter to 6000rpm and didnt even hit it!!!

ke_70
27th September 2009, 11:23 PM
if this thing gos good as the sprinter sell the 86 for like 17-18k and deck this thing out even more not that much more to do on the sprinter to and it'd b easyer to sell to cause its a proven competitor

thats my opinion oh and the chassis all good in this one as well it'll be good to start fresh mind u i think u will have rust in this to soon was'nt the boot pretty bad?

driftke70
28th September 2009, 12:06 AM
keep this, sell 86,

86 has had its chance.

FAST EDDIE
28th September 2009, 11:12 PM
Yer the boot floor was rusted out to fk thats why i chopped it out, this thing has no fust in it anymore chopped it all out before we resprayed it, and got a new left rear door :)





AND FOR THE BEST PART FINISHED THE FUEL SYSTEM TONITE AND CRANKED IT OVER AND IT STARTED FIRST GO. AFTER ALL THE CUSTOM WORK, ENTIRE RE-WIRING OF THE CAR, CHOPPING HALF OF THE ECU LOOM OUT, IT STARTED FIRST POP, I LOVE IT WHEN THAT HAPPENS!!!!!

ke_70
28th September 2009, 11:26 PM
a master at work! good work
so sence u like cutting rust out i know a friend whos car is almost brown in it lol

so its ready to be thrashed after a tune?

Sherlock
28th September 2009, 11:34 PM
SKID TIMEEEE! lol

What happened last Thursday with the struts? No reply? Hahaha

FAST EDDIE
29th September 2009, 08:38 PM
oh shit i never giot a msg and deleted ur number so couldnt msg u, got angry and have them at home again haha

Sherlock
29th September 2009, 11:06 PM
Hahaha damn it! I'll message you again later this week and try and organize something man.

FAST EDDIE
9th October 2009, 10:24 PM
car is running, tailshaft and panhard rod arrive tomorrow then it will be driveable, gona get wheel alignment and boost it up on teh dyno then out to the track

scottae71
10th October 2009, 02:45 PM
this things sick, but nothing like the 86, keep the ae86. you would regret gettin rid of it.

FAST EDDIE
11th October 2009, 12:40 PM
i know 86 is a decent car to drive but i droped the ke on its wheels and rolled it back and forth in teh shed. Solid mounts and nad killer seats make it fell like and angry as fk car!!!!

driftke70
11th October 2009, 02:06 PM
they are all angry as hell,

imagine if for a christmas present you got a 4k and your brothers got 4ac and 4age, id be pissed off.

Matt-AE86
11th October 2009, 02:13 PM
Are you sure you are building this for your girlfriend? hahaha. nice work.

green_boy_91
11th October 2009, 03:12 PM
they are all angry as hell,

imagine if for a christmas present you got a 4k and your brothers got 4ac and 4age, id be pissed off.

haha..

FAST EDDIE
13th October 2009, 08:07 PM
Are you sure you are building this for your girlfriend? hahaha. nice work.
:DD

car is totaly complete and now im bored, made a side pipe exhaust for a bit of oldschool styling. has stupid ammounts of lock and powersteering cool!!

obey wan boenny
13th October 2009, 08:18 PM
Awesome Eddie, get pictures up! didnt take you long to get it sorted!

Eddy
13th October 2009, 08:28 PM
well if your board i have a panno that you can put a sr 20 in :)
looks good to

70wagon
13th October 2009, 09:08 PM
:DD

car is totaly complete and now im bored, made a side pipe exhaust for a bit of oldschool styling. has stupid ammounts of lock and powersteering cool!!

just in time to help me with my new motor :P

FAST EDDIE
18th October 2009, 07:21 PM
its done

shift_rook
18th October 2009, 07:25 PM
fap fap fap, now all you need is vids

driftke70
18th October 2009, 11:26 PM
yes yes goood gooood

http://www.creativescreenwriting.com/csdaily/csdart/images/2004-08-August/Star%20Wars%20-%20Return%20of%20the%20Jedi%20-%20You%20don%27t%20know%20the%20power%20(300w).jpg

ke_70
19th October 2009, 04:38 PM
whens its first outing?

FAST EDDIE
19th October 2009, 07:38 PM
first outing is tomorrow taking it to work to clean it and get a wheel alignment, then to jazmac friday to make sure its running sweet and boooooost and then drift school saturday!!!!

shift_rook
19th October 2009, 07:41 PM
lol, just in time ey

ke_70
19th October 2009, 07:47 PM
hows kaceys car goin? will it make it in time? i know he wanted to be out when this was finished

what time will it be at bv? if its still there about 4 i might call in on my way to work if that cool with u of course?

FAST EDDIE
19th October 2009, 08:41 PM
Yeah caseys ke30 is getting wheel alignment tomorrow hopefuly, its all runing and driving, going up to jazmac with me friday to spool it up on the rollers, also with my mate steve gold/ silver ceffy to make sure they are all safe to thrash on the track.

will either b at work or tanunda tyre with it man come check it out no probs.

I am halfway through paying off a diesel mav (gq partol) ute which is gonna be a tow/extreeme 4wding machine which is aparently what all the retired drifters are doing these days lol!! t28bb turbo in shed waiting to go on that aswell lol!!

driftke70
19th October 2009, 10:05 PM
hehe yeah seen pickering and stuff are getting into it.

RyGuy86
19th October 2009, 10:12 PM
Yeah caseys ke30 is getting wheel alignment tomorrow hopefuly, its all runing and driving, going up to jazmac with me friday to spool it up on the rollers, also with my mate steve gold/ silver ceffy to make sure they are all safe to thrash on the track.

will either b at work or tanunda tyre with it man come check it out no probs.

I am halfway through paying off a diesel mav (gq partol) ute which is gonna be a tow/extreeme 4wding machine which is aparently what all the retired drifters are doing these days lol!! t28bb turbo in shed waiting to go on that aswell lol!!

Lol,

Bought my JK MY 08 jeep wranger a few weeks ago. long wheelbase four door for some extreme 4wd action.

driftke70
19th October 2009, 10:57 PM
extreme alright, but the question is for how long ;)

FAST EDDIE
25th October 2009, 04:41 PM
well made it to the dyno friday and there was one hose clamp loose and had to put an earth on the temp guage sender, spins wheels heaps easier than the 86 on the dyno so with 2 of us sitting on the boot it make 175kw but was leaning out towards the top, we changed bits and pieces over and found it to be a faulty ecu, it then made a healthy 178.9kw on 13psi (same dyno that my 86 makes 221 on 20psi) diddnt bother winding boost up cos i didnt want to have any issues with the engine but 16-18psi adn would easliydump over 200, engine is in realy good condition.

made it to the wheel aligner and adjusted it up to the same specs as my 86. first time out on track seems to be a real good thing to drive, alot different to my 86 but still good, didnt have enough castor so wound it on as far as it goes and it still isnt enough so have to sus that out.

after getting used to driving it and having to turn back the wheel was throwing in massive scandos and hamering flat out on the track with it not missing a beat temp guage not moving and doing lap after lap. Wit the 477 diff ratio it would do the esses in 4th and i could scando the straight in 5th!!!! thing is for sale, will be taking it out in 2 weeks for g1!!

bigm
25th October 2009, 05:02 PM
5th gear! crazy mofo.

cool car, pitty its for sale.

FAST EDDIE
25th October 2009, 07:37 PM
heres some pics thanks jay :rolleyes:

Evocom
26th October 2009, 12:52 PM
nice shots man. side pipe sounded sweet as. that red ke in the last shot looks sweet man. lol

Matt-AE86
26th October 2009, 05:35 PM
Simons recent KE he sold ?

FAST EDDIE
26th October 2009, 07:02 PM
yep thats simons old ke, was ripping it up on saturday with the new pilot!!

gonna mod the castor arms to make more castor, organised a new lift pump as the holley i was using fked up and need to put some padding on teh cage and get a fire extinguisher and then it will be ready for g1 in 2 weeks!!!!

driftke70
26th October 2009, 10:05 PM
whats with holleys fucking up, its all i ever hear about them.

im using a pierburg lift pump, have heard nothing but praise for them.
http://www.tweakit.net/shop/product_info.php?manufacturers_id=76&products_id=5103

70wagon
27th October 2009, 07:47 PM
"evocom" aka evan is the new pilot lols

FAST EDDIE
27th October 2009, 07:58 PM
yeah i have 2 of these little lift pumps cant remember wat brand on my 86 and will be running one on the ke.

Had issues with 3 deg castor with the wheel not turning back so i wound the whole thread on which made it better but not right which would make it to about 4 deg. Had a look tonight cos i was just gonna shorten the castor rod BUT the lca is hitting the engine xmember and the swaybar So i chopped the lca so the first part of it stay straight half way down it bends foward, not much but will make everything work with alot less stress and will allow me to wind on towards 5 maybe more deg castor. and gonna chop and tube the castor rod 40mm shorter so that should sort out the issues, organised 8 adrenalines for the g1 next weekend so will be out ripping it then!!

Cant believe how much ive been offered for this thing already but my gf will be driving it in drift school next year before i sell it sory guys.

FAST EDDIE
28th October 2009, 07:31 PM
felt like i was ripping massive scandos down the straight like the old days

ke_70
28th October 2009, 10:37 PM
do u need wheels for g1?

driftke70
28th October 2009, 11:27 PM
do you need that much castor?

FAST EDDIE
29th October 2009, 08:04 PM
Thanks clay but i got rims, and those wouldnt fit my guards anyway theyre too big:P

yer with 3 deg there was no tunr back of the wheels at all and if u look at the setting sils run they are around the 7 deg castor!!

done lcas and shortened castor rods then guards required choppies again!!!!

wheel alignment saturday hopefuly.

driftke70
29th October 2009, 08:13 PM
sorry forgot your running sil stuff, thats understandable.

Buck
30th October 2009, 03:27 AM
so what exactly did you do to the control arms?

and are those seats mounted literally on the floor? looks like they are mounted SUPER low, side or bottom mount?

FAST EDDIE
31st October 2009, 03:53 PM
hope the quality drawing show u what i did with the lca?!!

seats are velo milano bottom mount only, drivers side i chopped out the rail under the seat to drop that aobut 20mm then made some l brackets that bolted to the seat and body hope drawing explains that too

--Redwork--
31st October 2009, 08:29 PM
What strut tops are you using.??
I had a friend machine some up for me the move the top of the strut back another 12mm..

And are you aware that ae86 strut tops in an E7 give less castor.

FAST EDDIE
1st November 2009, 05:20 PM
im using s13 tops problem solved neway.

lumpye7
1st November 2009, 05:26 PM
dude this thing is crazy!

spewing i didnt make it to the d school to check it out.. ahh well.. will be driving at the next d school, will have to have a look then.

well done man... s13 ke's FTW haha

FAST EDDIE
4th November 2009, 08:48 PM
got wheel alignment 7.3 deg castor and went ouit to 4 deg camber for some reason from 3.5, fited a thermo next to the engien fan just incase cos its gonn be hot on saturday, picking up tyres friday and all ready for g1

shift_rook
4th November 2009, 08:51 PM
best of luck mate, maek sure someone gets some good vids

FAST EDDIE
12th November 2009, 06:02 PM
Made it to the track and the car went brilliantly all day didnt miss a beat and fried adrenalines in hot temps, didnt do well in the comp mainly cos im not used to the car yet and am by far over drift and spending so much money. Poor ke will sit in the shed next to my 86 till next year drift school then will be on the market.

lolwat
12th November 2009, 08:43 PM
am by far over drift and spending so much money. Poor ke will sit in the shed next to my 86 till next year drift school then will be on the market.
:(
(10 char)

craig2
16th December 2009, 07:54 PM
just read all 11 pages sick build nice work
i am doing the same with my drift ke70 now
any more info on using stock and wiring it would be great help

FAST EDDIE
24th December 2009, 09:44 PM
i drew a diagram in the tech questions section recently how to wire stock ecu

FAST EDDIE
22nd April 2010, 04:51 PM
what do u guys think about me putting the stock headlights and grille back in????

JUG-HEAD
22nd April 2010, 05:03 PM
would make it look a lil nicer i reakon

ke_70
22nd April 2010, 05:05 PM
yeah mate do it

70wagon
22nd April 2010, 06:15 PM
yes winner!!!! would make it look like a ke again from the front! :D

Evocom
23rd April 2010, 12:08 AM
Indeed I believe you shall do this then bring it out and skid it at the june practice before G1. I want to tandem with this.

FAST EDDIE
23rd April 2010, 06:01 PM
i have a pic on my fone of our cars together ev from drift school looks killer!!!! might just chuck the stok lights back in then i dont like the ke front but it looks shit like it is!!!!

Evocom
24th April 2010, 12:42 AM
I saw that pic and it looked alright but they would look so much better on track being thrashed not hard parked on the grass. lol

FAST EDDIE
30th April 2010, 09:20 PM
just purchased a lhs jdm quad headlight setup for fark all in NZ lol!!!

ke_70
30th April 2010, 10:58 PM
should'a bought mine! fuck they were mint!

jdmke70kid
30th April 2010, 11:48 PM
lookn good eddie mad colour i reckon ahahha nice to see more kes at mallala good job man

FAST EDDIE
24th May 2010, 08:55 PM
well ive actualy done some work on something instead of drinking beer lol got the flat front lights and grille in, dont personaly like it but hey it looks better that how it was. gotta get my lift pump back cos for some reason it just stopped working it had done like 2 hrs work. will be out at mallala at drift school 3rd july i believe!!!!
http://www.ae86drivingclub.com.au/forums/attachment.php?attachmentid=10938&d=1274694888

svenmate
25th May 2010, 12:08 AM
Looks good man! Top quality build.

R&D Mechanical
25th May 2010, 07:48 PM
Looks good dude, im hoping to goto drift schoool also, you teaching?

FAST EDDIE
25th May 2010, 08:11 PM
nots sure should be its a good day!!

FAST EDDIE
26th June 2010, 09:36 PM
well got the thing out the shed for a wheel alignment friday, set it to -7 deg camber and 6drg caastor and 2mma side toe out, see how it goes

twisted
26th June 2010, 09:47 PM
holy crap -7' camber!

shift_rook
26th June 2010, 09:48 PM
thems alotta camberz

--Redwork--
26th June 2010, 10:06 PM
Mines daily driven with 3.4 degres. :) camber wear sucks. lol

FAST EDDIE
27th June 2010, 01:18 PM
just trying different setups to see what works best, going extravagant changes instead of little ones, if its shit ill back it off a bit. looks fkn killer tho haha, missing alot of track now with the wheels so far in the guards lol

corey70
30th June 2010, 08:21 PM
hey man, was just looking at my radiator on my sr ke n looks like ill struggle to get the top hose on, noticed in 1 of ur pics the positioning is the same but didnt have a hose on it yet in that pic, what hose did u end up using? standard, or 1 from a diff car? or 1 of those flexy things? lol

cheers

FAST EDDIE
30th June 2010, 09:10 PM
here u go

70wagon
1st July 2010, 01:25 PM
where did you get your inlet plemum from? and how much? and dus the stock fuel rail and throttle body fit them? yes i no they foul on the master cylinder but ill fab the shit out of it to make it fit!!

FAST EDDIE
1st July 2010, 07:49 PM
darren lewis, ill tellu ont he weekend, yes stock rail works!! do it just need a bit of cleaning up with the die grinder but sweet other than that

ae71ness
5th July 2010, 02:09 AM
pics of negs 7 camber?

FAST EDDIE
5th July 2010, 08:59 PM
dont think i got any, didt make the setup better so im gonna rip out the ps and try manual rack cos i think that why the setup feels so far different than my sprinter

70wagon
5th July 2010, 10:19 PM
i like that! manual racks win!!

shift_rook
5th July 2010, 10:30 PM
get a quick rack in there, they're good for lols

FAST EDDIE
16th August 2010, 09:25 PM
well eventualy got a s12 manual rack, had to mod the coulmn uni joint to fit, is a bit homo 4 turns lock to lock, will see how it goes. ill be cranking the camber back to 3-4 deg, about 6 deg castor and 5mm toes out and see how it goes at stadium drift!!

shift_rook
16th August 2010, 09:43 PM
thems a lot of turns, can get steering quickners on ebay, get like a 2:1 ratio and let the good times roll,. if you're interested i'll swing a link

Evocom
16th August 2010, 11:31 PM
The manual steering will help tone your cannons lol. For your interest my alignment specs are around 3.5 + degrees castor, 4-5 degrees camber and 2mm out. This was from simons memory so may be slightly different. I need to get it checked soon anyway so I'll let you know then. I'll give you a call in the next few days as I'll probaly be heading down to get my tires at the end of this week. I hope we will be seeing this beast out at tailem next weekend

FAST EDDIE
17th August 2010, 12:20 AM
fk yeah it will be, ill have the rims ready when u want em, just let me know!! chuck up the link chris

70wagon
17th August 2010, 08:30 PM
yer my specs r -3.5 degrees camber 4.5 castor 2mm toe out. handles to the goodness! cant wait to see this rip some skids again!

FAST EDDIE
18th August 2011, 09:18 PM
check out fast fours mag thisissue myke is featured

FAST EDDIE
13th May 2012, 01:09 PM
After a fair bit of time in the shed got the ke out for drift school for a bit of testing before drift super cup. worked realy well running adrenaline 002s.

So drift supercup came around yesterday with the ke running mint just a little short in the legs with the 4:7 diff qualified 9th which i was cheering about!!
First battle against mohammed el houli from vic, I led out clipped ripple strip on the rhs wheel and popped the balljoint out of the lca somehow so that was the day over! prety bummed about it all but at least i showed it can hold it with the top runners in aus with 178kw!!!!

SOUTH70
16th May 2012, 10:42 PM
That sucks, seen this on the trailer and was pretty devo was so keen to see more of this ke70 and daveys

FAST EDDIE
29th June 2012, 07:11 PM
I have sold this car, its been shipped to nsw new owner is jason. mr_loz on here. http://www.ae86drivingclub.com.au/forums/member.php/5074-mr_loz.

get ready for it to hit the tracks of nsw!!!