PDA

View Full Version : Ae71 with mick jagger swagger



Anticeptik
4th August 2011, 08:32 PM
Been reading a few builds latley and figured i should finally do one about my car

Little about the car and why i brought it. I was looking for a run around cheap daily as my 180 was doing my head in. Found that my mate was selling a bog stock auto ae71 for cheap. So i grabbed it.

I didnt have any intentions of changing a thing on it. But basicly who the fuck was i lying to lol.

How she sits atm
T50 manual conversion
Ae92 small port
Trd copy extractors
Pod filter
White line strut brace
3/8 " alluminium fuel line the whole way.
2ltr surge tank
Lift pump
Vl turbo high pressure pump.
S series diff
Mr2 short stroke rear shocks
Cut au springa in the rear
Davis craige thermo fan
Xt130 lca
Xt130 struts
All new ball joints and bushes
Xt130 brakes
Clutch industries heavy duty clutch
White line adj sway bars front and rear
And the standard issue dildo shifter.
Ssr mesh 14x7 on the front
Challengers 15x8 on the rear.

So shes come along way since i brought her and still have plently more plans for her.

Ill chuck some pictures up later tommorrow

Anticeptik
4th August 2011, 10:48 PM
stock
http://www.ae86drivingclub.com.au/dcimages/2/7/0/6/193886.jpg

now
http://www.ae86drivingclub.com.au/dcimages/2/7/0/6/193888.jpg
http://www.ae86drivingclub.com.au/dcimages/2/7/0/6/193890.jpg

HIZOKU
4th August 2011, 11:13 PM
Mick jagger dont have swagger either does this car. Talk about a POS.

Does not even run a Kintama sticker LOL

matt99
4th August 2011, 11:14 PM
Nice stagger bro, going for that authentic funny car look?

leigh4110
5th August 2011, 12:01 AM
lol robbie and matt always with the negative =p

maxhag
5th August 2011, 06:51 AM
The Challengers look tha goods bro..... Thought about a pair for the front?

Anticeptik
5th August 2011, 07:17 AM
Stagger is a must. Gives it a lean like hollow the don.

Dunno if im a fans of 15s on the front.

Bobito. Yeah i know i gotta go see papa dev to get some made up unless you have aome at your joint?

Anticeptik
5th August 2011, 07:19 AM
The Challengers look tha goods bro..... Thought about a pair for the front?



Yeah i had a pair for the front. Didnt like it so i sold them.

Matt had the matching set actually as well haha.

matt99
5th August 2011, 05:50 PM
Having said that, pretty sure Scotty Frost is snapping up my full set tomorrow.

Jdm-Mcc
5th August 2011, 07:52 PM
Did the paper bag on the boot come with the car or was it installed later?

Anticeptik
5th August 2011, 09:46 PM
Free bureek with every rolla purchase

HIZOKU
7th August 2011, 06:13 PM
What was that Afgan for dinner?

Anticeptik
7th August 2011, 09:38 PM
I full could go sone tikka actually.

http://www.ae86drivingclub.com.au/dcimages/2/7/0/6/195126.jpg

Heres how the install is at the moment. Not 100% happy.
I reckong ill redo the loom and put fuse box and battery in the boot.

Anticeptik
9th August 2011, 09:34 AM
http://www.ae86drivingclub.com.au/dcimages/2/7/0/6/554535.jpg
Fuel setup

Anticeptik
9th August 2011, 09:35 AM
Last night i was convinced she needed a freshen up so. Started stripping her down ready for repair

http://www.ae86drivingclub.com.au/dcimages/2/7/0/6/196041.jpg

matt99
9th August 2011, 11:40 PM
Look at the poor neglected 1600.

Serious fuel system is serious.

Anticeptik
10th August 2011, 11:43 AM
http://www.ae86drivingclub.com.au/dcimages/2/7/0/6/554538.jpg

Picked up this bad boy front end last night. Lined up nice.
Just ordered some quads last night so cant wait.

Juat need to find a chrome front bar now and some gaurds to cut up for the rear arches

AB-Ke70
10th August 2011, 09:00 PM
looking tuff man, maybe you can come help me with my conversion haha. just a quick question, how hard was it to install the s series diff? coz i cant find a tailshaft that will bolt to my t50 and borg warner diff. but can get an s series diff and tailshaft that will bolt to my t50, thanks

Anticeptik
11th August 2011, 08:57 AM
you could always get a tailshaft made to suit.

S series was a dirrect bolt in.
I havnt broken a axel yet.
But im gonna get something bigger, the thing wines off its dick

matt99
11th August 2011, 11:56 PM
Sprinter tailshaft should work AB KE70

Anticeptik
12th August 2011, 08:36 AM
I dont think so matt. From memory the pcd was different on the flanges.
Ill check tonight.

matt99
13th August 2011, 05:17 PM
Flanges should be the same as S-series diffs only came out in Sprinters and E7 panno's. I would only be worried about the length.

Anticeptik
20th August 2011, 10:55 AM
Picked these up last night

http://www.ae86drivingclub.com.au/dcimages/2/7/0/6/202772.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/0/6/202774.jpg

s13 james
20th August 2011, 01:09 PM
looks really cool, goodwork man

Anticeptik
24th August 2011, 03:49 PM
http://www.ae86drivingclub.com.au/dcimages/2/7/0/6/554626.jpg

Anticeptik
24th August 2011, 03:51 PM
http://www.ae86drivingclub.com.au/dcimages/2/7/0/6/554627.jpg

Anticeptik
24th August 2011, 03:53 PM
I also got thia is the mail the other day.
Dunno if im gonna go down that path any more after buying another car

http://www.ae86drivingclub.com.au/dcimages/2/7/0/6/204608.jpg

Anticeptik
28th August 2011, 07:00 PM
Quads arrived in the mail B-)
http://www.ae86drivingclub.com.au/dcimages/2/7/0/6/207434.jpg

matt99
28th August 2011, 10:56 PM
Emrem Carwash? Hhhomahgod.

Quads look the goods.

Anticeptik
15th November 2011, 07:44 AM
I've been trying to work out where this fuel/exhaust smell is coming.

Basically I have No clue soo this is the result

Anticeptik
15th November 2011, 07:46 AM
http://www.ae86drivingclub.com.au/dcimages/2/7/0/6/555106.jpg

joeschmo_57
15th November 2011, 08:49 AM
hello wutang

so no turbo?

Anticeptik
15th November 2011, 10:48 AM
Nah not Turbo yet. I'm having a hard time trying to find the items I need.

Sort of need to talk to some one who knows 4agze and the compability between them all

That and the mark ii seems to be getting all get the love these days

willa
15th November 2011, 11:32 AM
Have a read of davey clarks blog, has a basic 'how to' on 4agte that might be of some help!

That boot-cabin cover thing looks good, have the same plan for mine!

Will.

Anticeptik
15th November 2011, 11:58 AM
Yeah I had a read of that a while back. Wasn't that reffering to how to Turbo a 4agze.

I planned to chuck it on a ge. And use 4agze cas loom injectors And ecu out of a ae92 but finding one seems hard work.

I also don't know if the cas are interchangable between models etc.

willa
19th November 2011, 02:04 PM
Oh yeh im with you now mate. I assume you dont want the afm/dli (cas with coilpacks) type setup? If you do, I have an afm and ecu, which means youll just need to collect up the ignition bits to suit.

Lemme know,

Will.

Anticeptik
24th November 2011, 08:47 AM
Na i can't run a dizzy the manifold I brought looks like it will foul up on it.

I'd rather use a ae92 gze setup if I can find one.