Yep another track car from team fast eddie

[FAST EDDIE]

pics up tomorrow

[john84ie]

Interesting thread! Lol

[Jacobxxx]

would read again

[dan.91]

I was glued to this thread, I read every page

[slide86]

Haha just wait smart assess, Eddie actually builds some of the best cars on here......if you only knew the goodies he has stashed away in his sheds. He's been doing this for a while now

[jakel]

its tomorrow??

Its now later tomorrow??

[ke_70]

hhhmm... an sr t18? i don't think you've put an sr in one of those yet ;)

[shift_rook]

whatchu got dere? hype building sir ed

[johl]

in for the hype

[fantapants]

in on juan!

[FAST EDDIE]

nothing like the quality of my other builds but we took a nice 4k slant ke, light blue spec, delivered courtesy of klingberg (team spot on sr kewagon) did a couple of skids before pulling the real tough 4k out and within hours had the old vl rb30 shoehorned in.

a little firewall massaging required with the shifter coming in not to bad position.

spent a couple of hours today on box mounts and fired it up. Modified the tie bar so the radiator can sit on top of it as the engine is a little longer than the 4k lol

list of things to do :

wire engine properly
bolt on the extractors
fit the vl pump
chop knuckles
longer lcas or maybe chop and lengthen
make a bracket for the acclelerator cable
make a hyraulic clutch work
wait for my mate to make a sleve for the tailshaft
get some front guards
do some skids

[FAST EDDIE]

206282062920630

[Jacobxxx]

how heavy is the 30 compared to a 4a or sr?

[billett86]

looks like a pretty cool build can't wait to see the outcome

[Jdm-Mcc]

how heavy is the 30 compared to a 4a or sr?

Rb would be atleast 1.5x the weight of an sr!

[FAST EDDIE]

not sure but who cares itl skid!

[shift_rook]

budget engine meets budget beater, would be a bit of a heavy nose but still... cooooo

[Anticeptik]

my mate did this a while back never finished it, im interested to see how it pans out.

[FAST EDDIE]

bit more progress on the weekend

made the 86 clutch pedalbox fit next to the ke one and welded them together to make on sexal pedalbox.

did the wiring for the ecu and fuel pump

made a dogee bracket for the accelerator cable

mademounts for the radiator

installed my brand new clutch master

best of all today bought some 8kg front ke springs for not too bad price!!!

next weekend will entail fuel pump install, weld a bigger pickup in the tank, probly put a new water pumpon the rb, put the motor back in for good and maybe a few front sus mods

[FAST EDDIE]

also purchased this week ajps lock spacer and new rack boots. may attack the sus this weekend but might just get it running with fuel system in properly. needs a waterpump as its seeping out the hole in the front but might just see what chemiweld does!!

[DearmanKE]

sounds like its gunna be pretty intense. and in reguards to the pump do it, dont chemiweld that shit, if it was headgasket then maybe but waterpumpm is easy

[FAST EDDIE]

53 for a new one tho!! radiator is seeping a little too, chemiweld?

[FAST EDDIE]

bit the bullet and bought a new waterpump today. getting excited to go home and do some work on it!!!

SA guy i need some slant front guards!!!!! who has some?

[FAST EDDIE]

heres a few pics after the weekends effort, got it running, figured out what was going on with the wiring, for some reason the trigger wire i used for the relays cuts out when cranking hence killing fuel pump and ecu relays and no spark while cranking.

doged up a tailshaft so i could drive it, turned out pretydamn good so i decicded to do a victory skid lol. rb30 in a ke great success.

may need a turbo i think



210522105321054

[PLZB-18]

my mate did this a while back never finished it, im interested to see how it pans out.

this one

http://www.ae86drivingclub.com.au/forums/showthread.php/10252-Alex-s-AE71-RB30

[FAST EDDIE]

car is now wired running and driving. put the 8kg front springs in lengthened the lcas 30mm has around -3deg camber made a radiator support chucked the vl thermo fan on, need to suss out the diff still and make the new tailshaft then wheel aloignment and skids!!!! 21340
21341
21342

also looking at an sc14 instead of a turbo, love the blower noise!!!!

[FAST EDDIE]

a bit of toyota quality going into this holden nissan abomonation!!
21564

[FAST EDDIE]

got a t series from a corona (the one that has t18se on the boot) t292 code. mounts are a little different but will bolt straight in!!2169321693

[FAST EDDIE]

heres a few pics 21825
21826
21827
21828
21829

bonett pins that cost me 50c each to make

relocated the battery to the rhs of the engine bay to make room for the charger

the old dogee tailshaft i threy together andthe new sleve and new tailshaft i made

got the t series in with only a few issues, 86 handbrake cables and had to chop and leghten the panhard rod.

[FAST EDDIE]

made it to the track on saturday. got a wheel laignment in the morning, has 3deg camber with my lcasi made now has 3 deg castor with th wheels ending up sitting against the front of the guards so had to chop them out.

when i got to the track the alternator decided to give up then came good after a few laps. thrashed it hard all night was prety impressed with how it handled, had an issue with the t series drums locking on and robbing power and blew out a brake hose so drove with no brakes for a few laps.

all in all its prety decent drift car, gonna put the sc14 on make a swaybar for the front and take it out again!!

all the tossers going on about the weight over the front being too much and the car handling like shit are dreamers drifts far better than a 4ag ke70 hahahah.

[JUG-HEAD]

easily the loudest most shittest sounding car of the night lol but looked like a hell of alot of fun

[shift_rook]

vids or ban!

[AJPS]

all the tossers going on about the weight over the front being too much and the car handling like shit are dreamers drifts far better than a 4ag ke70 hahahah.

glad to hear you got it running

you would notice the difference in the hills

[FAST EDDIE]

yer youre probly right, but for drift not a problem!!!

[FAST EDDIE]

my gf has a vid ill upload tonight if i can

[AJPS]

yer youre probly right, but for drift not a problem!!!

yeah mallala needs grunt, so this thing would be sweet,

enough power to get the tyres spinning and enough lock to stop it spinning

= win

[FAST EDDIE]

replaced the blown brake line, and the other side was also rubbed through front the wheel rubbing, snapped the mounting bracket off the body and drilled holes and mounted it flush to the inner skirt with zipties of course so the wheel wont rub it anymore, need to get the supercharger setup on soon!!

[jamesm]

vid!!

[Jacobxxx]

Definitely need detailed posts of supercharger conversion, have a friend that wants to do one.

[FAST EDDIE]

yer will get onto it after g1 next weekend

[FAST EDDIE]

well eventualy pulled my finger out and got the sc14 mounted on needs a belt and a pipe and itl be done maybe a fuel press reg that does something.
23632
23631
23633
23634
23635

[FAST EDDIE]

bought a intercooler to use as a top mount and the pipework from just jap will install that this weekend with a bonnet scoop and a water sprayer to keep it cool.

[FAST EDDIE]

well took it to the track with the sc14 on and it felt like it went slower for all the effort it took to put it on haha.

i pulled the sc setup off tonight and when i took the radiator hose off it had nearly 1 cup of muddy water left in it total after last saturday, so i topped up the radiator thinking shed would be drinking water and not a sign of any trouble!!!! im guessing when it was detonating last weekend it was lifting the head a little and drinking coolant who knows!!

will be hitting up the track this saturday with some skinnies on loving it!!!

[obey wan boenny]

This car sweet, awesome budget build, skids so well! The haters who think itd be to heavy n drive shit, nothing a skilled eddie cant master :)