pen15
1st January 2009, 07:12 PM
OK so here i am going to show you how to install a Holden vr commie air box into your ke70 cut and shut small port / cut and shut bigport i don't know if the jdm bigport manifold will work due to the throttle body facing down but i am unsure
1:find yourself a fucked up Holden vn-vs get ur air box out of it
2:cut inside of the box until it fits like in the pics demonstrated
3:make up a couple of brackets like illustrated in the pics
4:use the existing coupler to mark the hole needed to run intake to the wright spot
5:u will need to move ur charcoal canister down onto the cross member yes you can keep ur charcoal canister
6:make yourself a block of plate and bolt all the shiz in
7:u will need to get rid of ur washer bottle and overflow bottle i moved my overflow bottle in front of the rad support if u have money u might be able to use an ae86 jdm washer bottle but ill let u blokes sort that out
the end result is fairly stock looking also has a good power curve compared to not running a filter at all or a pod filter alternatively u can give me a pm so i can pass on a message to Adam at kurnell customs who hepled me do this airbox
http://img197.imageshack.us/img197/5392/img0487op.jpg
http://www.ae86drivingclub.com.au/dcimages/4/2/8/2755.jpg
http://img146.imageshack.us/img146/770/img0489f.jpg
http://img16.imageshack.us/img16/7089/img0490xgu.jpg
http://www.ae86drivingclub.com.au/dcimages/4/2/8/2758.jpg
http://img42.imageshack.us/img42/1329/img0492er.jpg
http://www.ae86drivingclub.com.au/dcimages/4/2/8/2760.jpg
http://www.ae86drivingclub.com.au/dcimages/4/2/8/2761.jpg
http://img35.imageshack.us/img35/142/img0495yf.jpg
http://www.ae86drivingclub.com.au/dcimages/4/2/8/2763.jpg
http://img51.imageshack.us/img51/9637/img0497jj.jpg
http://img688.imageshack.us/img688/4072/img0498ro.jpg
1:find yourself a fucked up Holden vn-vs get ur air box out of it
2:cut inside of the box until it fits like in the pics demonstrated
3:make up a couple of brackets like illustrated in the pics
4:use the existing coupler to mark the hole needed to run intake to the wright spot
5:u will need to move ur charcoal canister down onto the cross member yes you can keep ur charcoal canister
6:make yourself a block of plate and bolt all the shiz in
7:u will need to get rid of ur washer bottle and overflow bottle i moved my overflow bottle in front of the rad support if u have money u might be able to use an ae86 jdm washer bottle but ill let u blokes sort that out
the end result is fairly stock looking also has a good power curve compared to not running a filter at all or a pod filter alternatively u can give me a pm so i can pass on a message to Adam at kurnell customs who hepled me do this airbox
http://img197.imageshack.us/img197/5392/img0487op.jpg
http://www.ae86drivingclub.com.au/dcimages/4/2/8/2755.jpg
http://img146.imageshack.us/img146/770/img0489f.jpg
http://img16.imageshack.us/img16/7089/img0490xgu.jpg
http://www.ae86drivingclub.com.au/dcimages/4/2/8/2758.jpg
http://img42.imageshack.us/img42/1329/img0492er.jpg
http://www.ae86drivingclub.com.au/dcimages/4/2/8/2760.jpg
http://www.ae86drivingclub.com.au/dcimages/4/2/8/2761.jpg
http://img35.imageshack.us/img35/142/img0495yf.jpg
http://www.ae86drivingclub.com.au/dcimages/4/2/8/2763.jpg
http://img51.imageshack.us/img51/9637/img0497jj.jpg
http://img688.imageshack.us/img688/4072/img0498ro.jpg