'95 200sx.

[Robo86]

Hey dudes.

As you would i know i parted out my beloved 86. Wasn't something i really wanted to do but it worked out good in the end, leaving me enough money to buy this car and have ample money left to do the basics.

I found this fella in a Stafford car yard.

1995 S14.
Maroon with gold stripes & badging.
130xxx
SR20DET Auto.

Its in awesome condition, everything works and it drives like a boring normal car does! enjoying the air-con too.

Plans are basics.
-Manual swap with HD clutch
-8/6 Coilovers
-2Way with the standard 3.9 (the ONE single plus of an auto)
-Upgraded Rad / braided turbo lines.
-R33 GTR wheels 215/45

The only thing on done to the car at the moment is a N/A S15 steering wheel (legal win), the one in the car was beyond rooted.

Hopefully keep her in nice condition haha. Enjoy the pics! should be some good fun.

Keep an eye out in here! will be doing my normal vids/pics of my driftingssss.

http://farm8.staticflickr.com/7154/6444608585_4513e73556_b.jpg
http://farm8.staticflickr.com/7019/6444609035_d7b0104654_b.jpg
http://farm8.staticflickr.com/7009/6444609455_91a47fa3f9_b.jpg
http://farm8.staticflickr.com/7006/6444610485_4ab9c1232a_b.jpg
http://farm8.staticflickr.com/7167/6444610119_e482f61b29_b.jpg
http://farm8.staticflickr.com/7019/6444609737_39ee131a29_b.jpg
http://farm8.staticflickr.com/7012/6444610781_6e818f3f95_b.jpg

Rob.

[marvis]

SOOOOOO COOOL!


ABS and AUTO, fuck them off.

[plohl]

Clean find man!

Hope to see you out in it soon!

[willa]

My brother has a zenki too, ive grown to love them! Keen for the future of this build

*subscribes

Will.

[benzo]

ABS and AUTO, fuck them off.

just ditch sensors unplug everything and take fuse out.

these respond well to simple mods. more snappy than S13 chassis too

Zenki love :heart:

[Jacobxxx]

http://24.media.tumblr.com/tumblr_lvpnhhGcZL1qfmo1do1_500.jpg

[Robo86]

so ive bought some gear for the old girl, kinda just getting everything together so i can throw it all in over xmas.

-8/7kg Silkroad RM/A8's
-Nismo 2way / 4.3 (5 bolt shafts for extra win)
-R33 GTR Wheels / 15mm bolt on's for the front
-Apexi front brace (og as HELLLLLL)

sorting the rest of manual this week.
new exedy clutch kit, new master/slave etc :)

[slide86]

stock as a rock........dont see many of them nowdays

[Vaughn]

hope to see this with as much win as your 86 :)

[johl]

kinda wish it came with the 4 stud brakes so you could run 15's

[slydar]

wow, that enigne bay! nice start. you can get like a plastic nismo? lip for these? good choice of wheels.

[HachiRoku444]

I hope you are going with a RB trans. Can't go wrong with that cheap of a swap. Did you score some 33 wheels? Good luck. I just sold my R32 GTR so I can finish my Beast AE86.

[James86]

wow so clean! looking forward to seeing you drive a car with power!

[Robo86]

cheers!
so this happened.
-15mm front bolt ons
-GTR's (215/45)
-Silkroads w/ apexi front brace
-Rolled front guards
-Tucked loom on drivers side.

just needs manual and diff now!

http://shirtstuckedin.com/wp-content/uploads/2011/12/IMG14144.jpg
http://shirtstuckedin.com/wp-content/uploads/2011/12/R.jpg
http://www.ae86drivingclub.com.au/dcimages/6/9/271977.jpg

[bigm]

looking good man,

i thought the Wheels would fill out the guarrds a bit better though? needs less camber?

[Vaughn]

mint! Neutral dump the shit out of the auto! get manual and 2way haha :D

[johl]

looking good man,

i thought the Wheels would fill out the guarrds a bit better though? needs less camber?

i think most people run 25mm spacers to make them fill the guards

[benzo]

i thought the Wheels would fill out the guarrds a bit better though? needs less camber?

S14's just have big guards.

I'm running 15x8 -37 (effective) 15x8.5 -20 under stock metal

[Jacobxxx]

Wheels staying black?

[bigm]

fair enough

[Robo86]

manual/2way this week i think.

http://farm8.staticflickr.com/7022/6659683821_c03db7724e_b.jpg

[McLEVIN]

pretty colour

[Robo86]

Ok so, after alot of BS, wrong parts and time between work etc.

car is now manual/hd clutch/ 2way 4.3 equipped.

got it done late friday night with many thanks to the lovely TOXIN.

drove it sat night 24 hours later and blew the head gasket. awesome!

suspect it was on the way out when it was auto and first good drive in manual mode popped it.

sizing up options but most likely just doing nissan HG kit, new gaskets for manifold and turbo and install my braided line kit/ water temp gauge.

http://www.ae86drivingclub.com.au/dcimages/6/9/283313.jpg
http://www.ae86drivingclub.com.au/dcimages/6/9/283314.jpg
Bit of handy work by Toxin, had to extend the fork section on the master, worked a treat.
http://www.ae86drivingclub.com.au/dcimages/6/9/283315.jpg
http://www.ae86drivingclub.com.au/dcimages/6/9/283316.jpg

[bigm]

looking the goods man

[s13 james]

so awsome ,pretty much what i want to do when off my p's,goodwork

[Robo86]

Ok so,
Since last update the HG is now fixed. It was blown in-between 3-4. Running nice now with rocker stoppers, braided turbo lines and new gaskets throughout the head/turbo side.

A week after fixing that the 2 Way shit itself so much so the car wouldn't even move! lol.

Sent it up to Duncan at Top Cog where he did a full rebuild on it. It's so tight and nice now, note to others out there... don't trust retards with important shit, use people with EXPERIENCE and KNOWLEDGE, costly exercise!

Track day coming up I'm trying to make it too, before then i hope to do a metal intake, castor rods and install my water temp gauge.

I'm sick of working on it! Also had to replace the rear seal on the gearbox, hopefully that will stop the smoke show when i pull up at lights...

Shiney Shiney
http://farm8.staticflickr.com/7207/6933552227_b24cfce3cf_b.jpg

Engine bay, somewhat tidy again
http://farm8.staticflickr.com/7201/6787424838_2ee1602ac9_b.jpg

Daily..
http://farm8.staticflickr.com/7067/6787413926_e8fe29732e_b.jpg

[blinded]

Makes me want to sell my car and buy an S chassis :)

Engine bay looks really good! Definitely seems like a safe daily compared to the look of your old 86!

[Vaughn]

Alex, Robo just said he is sick of working on it, you want something like that? :P













iJoke

[obey wan boenny]

Updates! skidss?

[niclol]

Copped a defect a think?

[kyle unwin]

Hope he didn't cop defect.
This thing is rad.

[Rice86]

If he got defected and the car looked as clean as it did on the last photo then there really is no virgin marry

[bigm]

there is really no virgin mary then.

defected for too low

[Jacobxxx]

Rob's name is blacklisted for too much badassery

[Robo86]

long time no speak! things happened. got defected, sold 33r's, bought 32r's, raised it up (noooo) and have been sliding it a fair bit. went to a morning sesh, heres the outcome!

45376683

go to vimeo and watch in hd, fuck embed!

[niclol]

Wow Nice driving!

If you don't mind me asking what size and brand tyres are you using? And are your silkroads 8/6 rate?

[Robo86]

thanks man, sure thing!

front: 205/50/16 KU31
rear: 205/55/16 Sumo FIRENZA ST-05A for drifting, whatever 205/55 for street :)

Coilovers are 8/7, thats what the default rate is for s14 in RMA8's

http://www.ae86drivingclub.com.au/dcimages/6/9/395501.jpg

http://www.ae86drivingclub.com.au/dcimages/6/9/395503.jpg

http://www.ae86drivingclub.com.au/dcimages/6/9/395505.jpg

[mdr.91]

Was good to see you back out there dude! Still killing it!

[benzo]

Robo livin' the life

[ke_70]

first sesh in the nissan?

[shift_rook]

Oh so nice, good to see some proper lines, Nice work!

[Robo86]

thanks bro.

been a while since ive been around these traps! missing the 86 life for sure.

i broke the engine in this again.

yanked it out, going to do a decent rebuild and get it nice and reliable with a bit more poke.

pretty stock rebuild just with poncams and an intake.

pics to come.

[niclol]

That's a shame, stock turbo SR's are usually really reliable providing you keep the oil temps under control.

[benzo]

dang

keep at it!

[Robo86]

So, new engine happened. It took longer than it should but thats ok.

Full OEM style rebuild with new oil pump, water pump, nismo thermostat, GKTECH fan and 256 11.5 poncams.

Have done about 1700km on the new motor, goes great.

Had trouble with VTC screwing up so I replaced the intake gear with a S13 intake cam gear to delete it all together, nice and quiet now.

Also snagged a good deal on a Fujitsubo cat back so I put that on.

Great to be driving it daily again, skids good too. Next morning session im in!

Pics soon!

Oh, i also got a JDM rear bar for it... sooo much better

[Jacobxxx]

March morning session? I wanna do it too

[blair]

March session - cool cats only?

[Jacobxxx]

Paying now

[Robo86]

63309023

^___^

[Rice86]

so good!

[Drift Channel]

How's this thing going? Any new videos to show us?

[benzo]

Was sold a long time ago?