PDA

View Full Version : 20V Dizzy Relocation Kits:



Sam-Q
15th December 2011, 10:37 AM
Dizzy Relocation Kits



To allow the cap and rotor of a 20V to be relocated to work off the cam pulley. This lets the orininal ECU to be used in a rear wheel drive conversion without firewall mods


These are in development and are due to be released very soon, expected price $320 for a kit.


Pics:

http://www.ae86drivingclub.com.au/dcimages/2/5/2/241804.jpg

http://i127.photobucket.com/albums/p143/daunderdweller/sq%20engineering/in%20the%20build/2nd-dizzy-kit-3.jpg

Panda BVB700
17th December 2011, 10:57 AM
now that is a neat looking bit of gear

Sam-Q
17th December 2011, 11:29 AM
the final prototype is about to be tested soon as well

Matt
18th December 2011, 10:31 AM
When it is ready shoot me a pm and i'll happily buy one to test it. Would be universal for silver vs black right?

Sam-Q
18th December 2011, 12:46 PM
I have someone who is going to test one already but thanks. I am making 5 at once though.

It will be universal, with even the possibility of working with adjustable cam pulleys.

z_brutalis
27th January 2012, 12:06 AM
definitely interested so early expression of interest here.

Sam-Q
20th February 2012, 11:40 AM
Progress isn't good on this product at the moment, I have to revise the design to have a bearing and oil seal.

spoon
22nd May 2012, 01:28 PM
also expressing interest :-)

Sam-Q
23rd May 2012, 10:01 PM
I now have a customer car running with this kit, I will be seeing how this fares for a few weeks and if it's all good then I will make more. I have enough here to make 30

nikki_sunn
7th July 2012, 09:44 AM
Dizzy Relocation Kits



To allow the cap and rotor of a 20V to be relocated to work off the cam pulley. This lets the orininal ECU to be used in a rear wheel drive conversion without firewall mods


These are in development and are due to be released very soon, expected price $320 for a kit.


Pics:

http://www.ae86drivingclub.com.au/dcimages/2/5/2/241804.jpg

http://i127.photobucket.com/albums/p143/daunderdweller/sq%20engineering/in%20the%20build/2nd-dizzy-kit-3.jpg

Hey is it still for sale and will you be willing to ship to the U.S? txt me. 360 516 3849 thanks

Sam-Q
7th July 2012, 06:25 PM
This product was developed for the U.S market. While I know I will sell some here most will go off shore. I already have two people running prototypes and four others with final versions. I am putting all my attention to a batch of 20 right now.

Sam-Q
7th July 2012, 07:11 PM
This is where it's currently at:

http://i127.photobucket.com/albums/p143/daunderdweller/sq%20engineering/in%20the%20build/4th-dizzy-kit-2.jpg

For the time being these are going to be $380 each

Dori_Dori
7th July 2012, 10:47 PM
Is that the final design kits?

Sam-Q
7th July 2012, 10:53 PM
yes, fourth version

Mickey_Gee
18th July 2012, 09:46 PM
Hi are you still doing this kit. I need one for a 20V. How do I get this..!

Regards

Mick

Sam-Q
18th July 2012, 10:49 PM
Hi Mick I have a few here and I have also finished my install guide. Here is the information I give to people:

The main part of the kit includes the following:

Main adapter, center section, fasteners and spacers. No modification is needed to the head or engine however it holds the cap too close to the exhaust wheel to clear the cam cover. Soon a shroud will be available to cover the open hole against the cam cover if used.

This kit it is a distributor cap relocation kit. The cap and rotor button are moved to the front of the engine while the original distributor base along with the wiring is kept intact at the back. This means all wiring bar the spark plug leads are left in their original position. It is suggested that the distributor blanking cover product is used to block off the electronics of the base. The original spark plug leads can be used in reverse bar the longest lead. A custom lead is for sale that looks like the OEM leads and costs $30. Also of note on the cap leads 2 and 3 need to be swapped positions as the cap is being rotated in the opposite direction. A single drop of Loctite or any other low grade retaining compound is needed to put this kit together.

Video instructions are available and this product comes with a warranty.

Price is $380 AUD, or about $388 USD

contact me on sq-parts@aanet.com.au or 0421 010 890

Davecb80
19th August 2012, 12:40 AM
Hi Sam,
I am after a dizzy relocation kit for my black top 20v. Do you have any in stock ? Can you give me a price including postage to 3690 VIC ?
How can I pay you ? paypal, over the phone, direct debit ?

Thanks, Dave.

Sam-Q
20th August 2012, 10:28 AM
I have them in stock as well as dizzy blanking covers adn longer leads.

Payment is either from direct debit or through my merchant account with westpac that uses Visa or Mastercard. I will send you a PM.

Also please have a read of the info on this kit here:

http://s-86.com/s-parts-dizzy-kits.html