macca1590
23rd February 2012, 11:37 AM
owned it for a while now and a boring rainy day lead to me making this thread
anywho is a 92 80 series landcruiser, got it mates rates from a guy at work
factory turbo
430,000kms, just run in
supposed 3" lift, bought it like that
33" bfg muddies
new transfer case when i bought it
a/c done just before i got it too
boost gauge
exhaust with all mufflers cut out
since i have owned it
built and installed 2nd battery tray, all wired up with solenoid(links batterys when engine has oil pressure and during crank to give both a work out)
welded up cracks and made plate to go over chassis where steering box mounts (apparlenly most lifted 80's and live axle 100's do it)
re wired headlights with extra relays and new semi sealed inserts
installed cheep and nasty snorkel
extended diff and gearbox breathers
extra fuel filter
exhaust gas temp gauge
boost tee (now 14psi)
played with max fuel screw on pump :DD
changed all wheel bearings
changed big end bearings (http://www.lcool.org/technical/80_series/td_bearings.html)
http://www.ae86drivingclub.com.au/dcimages/1/9/6/7/294782.jpg
http://www.ae86drivingclub.com.au/dcimages/1/9/6/7/294783.jpg
plans
steel bullbar
maybe a 3" exhaust
maybe a intercooler
go camping and shit
and pull shitty nissans out :P
anywho is a 92 80 series landcruiser, got it mates rates from a guy at work
factory turbo
430,000kms, just run in
supposed 3" lift, bought it like that
33" bfg muddies
new transfer case when i bought it
a/c done just before i got it too
boost gauge
exhaust with all mufflers cut out
since i have owned it
built and installed 2nd battery tray, all wired up with solenoid(links batterys when engine has oil pressure and during crank to give both a work out)
welded up cracks and made plate to go over chassis where steering box mounts (apparlenly most lifted 80's and live axle 100's do it)
re wired headlights with extra relays and new semi sealed inserts
installed cheep and nasty snorkel
extended diff and gearbox breathers
extra fuel filter
exhaust gas temp gauge
boost tee (now 14psi)
played with max fuel screw on pump :DD
changed all wheel bearings
changed big end bearings (http://www.lcool.org/technical/80_series/td_bearings.html)
http://www.ae86drivingclub.com.au/dcimages/1/9/6/7/294782.jpg
http://www.ae86drivingclub.com.au/dcimages/1/9/6/7/294783.jpg
plans
steel bullbar
maybe a 3" exhaust
maybe a intercooler
go camping and shit
and pull shitty nissans out :P