sotiros86
18th November 2012, 04:12 PM
Hey guys, just bought myself a new set of wheels and these have to go. I always swore that id never sell these, but there's no point just leaving these sitting in the garage.
SSR Longchamps XR4 15x8 -15 and 15x8 -2 $1700
15x8 -15's come with decent condition Nankang NS2s, a little bit of camber wear, but still plenty of life left in them.
They have a very small amount of gutter rash, but are overall in very good condition, and with a quick polish would look amazing.
The 15x8 -2's also come with ok condition Nankang NS2s, have a few shitty sections, but tyres still have plenty of skids left in them.
1 is immaculate, the other has had a repair done professionally after i clipped a ripple strip :(
The repair was done by Spot On Wheel Repairs in Unanderra, just needs some final light sanding and a polish, and it would be as good as gold.
http://i480.photobucket.com/albums/rr168/asotiros/01C00FAD-F4C1-42F0-AEB8-24CDBE0CDC84-5966-000002A7514CBA2E.jpg
http://i480.photobucket.com/albums/rr168/asotiros/62CA75BE-891C-4DEC-8B93-B0535FF0DF85-5966-000002A751FA46AC.jpg
AME Mesh 15x7 -3 and 15x6.5 +4 $450
I was using these as skid wheels for the track. Tyres still have a few skids left in them though.
I was going to get new outers spun up from Whitehorse Industries in Melbourne and widen these, but i just dont have the time at the moment.
For anyone interested, new outers are about $120 a wheel. So for under $1000 you could have yourself of crazy meshies :)
These wheels do have a few light marks and a little bit of rash (very minimal though), and with a good polish would come up looking sweet.
The 7s are the ones on the left, and 6.5s on the right.
http://i480.photobucket.com/albums/rr168/asotiros/IMG_3776.jpg
Will do all 8 wheels with tyres for $2000
All wheels are located in Wollongong NSW, about an hour south of Sydney.
I can drop them at the local e-go depot, so youll save 25% on postage, or can deliver them to Sydney also.
Cheers,
Andrew
SSR Longchamps XR4 15x8 -15 and 15x8 -2 $1700
15x8 -15's come with decent condition Nankang NS2s, a little bit of camber wear, but still plenty of life left in them.
They have a very small amount of gutter rash, but are overall in very good condition, and with a quick polish would look amazing.
The 15x8 -2's also come with ok condition Nankang NS2s, have a few shitty sections, but tyres still have plenty of skids left in them.
1 is immaculate, the other has had a repair done professionally after i clipped a ripple strip :(
The repair was done by Spot On Wheel Repairs in Unanderra, just needs some final light sanding and a polish, and it would be as good as gold.
http://i480.photobucket.com/albums/rr168/asotiros/01C00FAD-F4C1-42F0-AEB8-24CDBE0CDC84-5966-000002A7514CBA2E.jpg
http://i480.photobucket.com/albums/rr168/asotiros/62CA75BE-891C-4DEC-8B93-B0535FF0DF85-5966-000002A751FA46AC.jpg
AME Mesh 15x7 -3 and 15x6.5 +4 $450
I was using these as skid wheels for the track. Tyres still have a few skids left in them though.
I was going to get new outers spun up from Whitehorse Industries in Melbourne and widen these, but i just dont have the time at the moment.
For anyone interested, new outers are about $120 a wheel. So for under $1000 you could have yourself of crazy meshies :)
These wheels do have a few light marks and a little bit of rash (very minimal though), and with a good polish would come up looking sweet.
The 7s are the ones on the left, and 6.5s on the right.
http://i480.photobucket.com/albums/rr168/asotiros/IMG_3776.jpg
Will do all 8 wheels with tyres for $2000
All wheels are located in Wollongong NSW, about an hour south of Sydney.
I can drop them at the local e-go depot, so youll save 25% on postage, or can deliver them to Sydney also.
Cheers,
Andrew