PDA

View Full Version : AE71 Track/Road Build!



pt_y2k
22nd November 2012, 09:38 PM
Picked this up recently and have been tipping away at it...Might aswel throw it up here..:)

Originally an auto AE71,nice clean shell with minimal rust issues..:)

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407485.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407486.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407487.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407488.jpg


http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407489.jpg


http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407490.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407491.jpg

Painted the engine bay and got the body in a quick coat of primer...
http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407492.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407493.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407494.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407495.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407496.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407497.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407498.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407499.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407499.jpg


http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407501.jpg

And clear coat on!
http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407502.jpg

Painted the tubs:
http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407503.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407504.jpg

And back in the corner...:) i DOnt get at it during the week as im working 12 hour days...:/
http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407505.jpg

pt_y2k
22nd November 2012, 09:40 PM
Then picked this lot for it and stripped it down...


Ae101 GZE
Motor runs 12psi with a T3 pully and a 0.8mm TRD head gasket.
HKS Mushroom filter
Custom 1GGZE intercooler and piping.
212mm silvertop flywheel and exedy heavy duty clutch
ADM T50
Cusco Solid Engine Mounts
TRD Exhaust Mani.


http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407506.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407507.jpg

http://i51.photobucket.com/albums/f361/pt_y2k/DA5397BE-3A21-467B-B8FB-0B4B697653D1-961-000000D05566EEB1.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407509.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407510.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407511.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407512.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407513.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407514.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407515.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407516.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407517.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407518.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407519.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407520.jpg

pt_y2k
22nd November 2012, 09:42 PM
http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/538394.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407521.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407522.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407523.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407524.jpg

Got my box cleaned up too...must get at it with a dremel in the hard places tomor and give it a lick,
Before:
http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407525.jpg

After:
http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407526.jpg

pt_y2k
22nd November 2012, 09:45 PM
http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/538395.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407527.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407528.jpg


Then i went to clean the sump to make a new gasket and heard a dreaded rattle...found these sitting in the bottom..:(

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407529.jpg

Thrust washers fell out and done all the damage!
http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407530.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407531.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407532.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407533.jpg

Broken squirter...
http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407534.jpg

Chip outta the skirt:
http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407535.jpg

You can just make out the marks under the piston...
http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407536.jpg

pt_y2k
22nd November 2012, 09:46 PM
Picked up another gze and assembled it..:)

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407537.jpg


http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407538.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407539.jpg

Made up a few gaskets...

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407540.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407541.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407542.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407543.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407544.jpg

Propped the car up to whack in the 86 crossmember..:)

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407545.jpg

pt_y2k
22nd November 2012, 09:48 PM
Changed over the subframe....
http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407546.jpg

Whacked on the clutch and fly...
http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407547.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407548.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407549.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407550.jpg


And got this t3 tri brace of Spirited Drive..:)

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407551.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/1/9/407552.jpg

Also stripped my damaged engine and took it to the local engine shop...he reckons block is good! So picked up a silvertop block for cheap,gonna pull the crank out and put it into my 16v block with new bearings,and gonna turbo it...:)

Low Style
23rd November 2012, 11:00 AM
Digging the progress on this!

I have a bunch of SP and BP parts and a T series tail shalft if you want :)

(OO)SKYLINE(OO)
23rd November 2012, 09:10 PM
So far looking good!

Welldone! :)

Mika
25th November 2012, 11:42 PM
Looks soo good. Hanging to see progress on this! Love the colour of the car!

joeschmo_57
26th November 2012, 01:47 PM
Whole body purple?

pt_y2k
26th November 2012, 09:00 PM
Cheers Jon,if im stuck il be in touch..:) Nah gonna go 202 black as of yet anyway,not gonna get paint until the new year though..:)