PDA

View Full Version : Tools to purchase for Panel Beating



Matt
20th May 2013, 04:31 PM
Hammers / Dollies

When picking a hammer / dolly the best you can buy are the sykes pickavant range. These are perfect if you are in the trade and use them all day every day. The set you buy will last you from your first day until the day you retire.

However, for the home handy / hobbyist , something middle ground will last you as well the same time.

When purchasing dollies it is reasonably safe to assume that the heavier the dolly the better it is.

[img]http://thumbs2.ebaystatic.com/d/l225/m/mgojNcXsRaFdGue3chxV3qA.jpg[/url]

Jefferson Paint Supplies (http://stores.ebay.com.au/JEFFERSON-PAINT-SUPPLIES?_trksid=p2047675.l2563) in melbourne have some good equipment at reasonable prices.


Pullers

Slide hammers

Clamps

Welder

Other Bits

K1W1 Simo
20th May 2013, 05:13 PM
http://www.harborfreight.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/i/m/image_13440.jpg (http://www.ae86drivingclub.com.au/url?sa=i&source=images&cd=&cad=rja&docid=o8Bv8JNDDjBQQM&tbnid=aCOWrYuQ5LWQqM:&ved=0CAgQjRwwAA&url=http%3A%2F%2Fwww.harborfreight.com%2F3-8-eighth-inch-double-sided-rotary-spot-weld-cutter-95343.html&ei=Jr2ZUdupHYmuiQe_vID4CA&psig=AFQjCNGiDWU5E0d8XSauZWsAcuYPdqtQ7A&ust=1369116326517359)
SPOT WELD DRILL BIT
These are such an important tool if you are full on unstitching your panels from your body. A dot punch is needed to start at the centre of the spot weld. You will be left with a surface to weld new/restored panels onto, instead of holes where your drill has gone right through.