PDA

View Full Version : 4age 16V- Genuine and upgrade parts



Sam-Q
23rd August 2013, 08:06 PM
Genuine new Toyota parts
unless otherwise stated


- Private message
- Post in this thread
- call: 0421 010 890 (9am to 9pm in Victoria)


Almost all parts kept on the shelf in Victoria, is if it's urgent call


Other parts not in this list can potentially be ordered, just ask.

Prices subect to change.

GST inclusive.


Genuine 16V parts

- TRD Head gasket: $120
- Exhaust gasket: $30

- Cam seals: $10 each

- Flywheel bolts: $2 each
- Head bolts set- 5 intake and 5 exhaust without washers: $35

- RWD water pump: $110 (complete front and housing)
- FWD pump: $110 (complete front and housing)
- pump to top outlet bypass pipe: $30

- Timing belt: $65
- Timing belt pulley: $55
- Timing belt pulley spring: $8
- Timing belt kit with the above: $128

- Cam belt drive pulley: $22
- Crank pulley: $230

- Pistons +0.5mm: depends on model
- 4AGZE pistons 8.9:1 : $55 each



Custom and Upgrade 16V parts



- Upgraded oil pump: The original 16V pumps have a square tooth design which even with a TRD gear set is known to fail from it's stress raising square gear shape. This upgrade is a genuine Toyota pump is meant for a 4AGE 20V Silvertop and not only has thicker gears for more flow but a round tooth design which can handle much higher sustained revs. For an additional cost these are stripped to be ported on the gear housing inlet + outlet and the pump main outlet. From here the gears are packed with engine assembly lube for quick priming and finally re-assembled with high tensile bolts. Also available is a pressure up kit which is a spring and a pre-load washer to lift the pressure threshold of the oil. This is identical to the now redundant HKS kit.

Upgrade pump: $170
Ported oil pump: +$50
Pressure up kit: +$40 for either pump


- Distributor blanking covers: Billet CNC machined covers to suit all 3 types of distributor, negates the need for a ZE crank angle sensor: $90 each inc bolts.

- Exhaust flanges: Laser cut out of thick 12mm plate for only $50.

- Coilpack adapter plate: Replaces the original metal cover between cam covers to let many types of Toyota coil-packs bolt down. These are $120 each

- Dizzy blanking cover: 4agze crank angle sensors are rare and expensive, however they are electrically identical to normal 4age distributors. Use this blanking cover to replace the original cap and rotor button. Will require the rotor button shaft to be trimmed on small port engines. Price: $80 with bolts

- Velocity stacks: see here (http://www.ae86drivingclub.com.au/forums/showthread.php/68323-Velocity-Stacks-Trumpets-Ram-tubes)

- Billet oil caps: CNC machined from billet aluminium, custom options available. Cost: $65 or $95 with a custom design

- Adjustable cam pulleys: Reliable pulleys with a zinc coated steel outer section. Aluminium and Durilium pulleys may last in the short term but eventually they will wear out. No such problem with these steel outers. Price $280 exchange

Sam-Q
23rd August 2013, 09:02 PM
- RWD water pump:

http://i127.photobucket.com/albums/p143/daunderdweller/sq%20engineering/resold-goods/water-pump-4age-16v-rwd_zps67bd1c76.jpg
http://i127.photobucket.com/albums/p143/daunderdweller/sq%20engineering/resold-goods/water-pump-4age-16V-rwd-extras_zps1f8af4de.jpg



- Upgraded oil pump: Showing two of the three areas that are ported to allow the greatest oil flow and least drag. The third area which is isn't pictured has the greatest effect.

http://i127.photobucket.com/albums/p143/daunderdweller/sq%20engineering/services/20v-4_zpsa922f194.jpg



- Coilpack adapter plate: As shown with 1ZZ coils fitted

http://i127.photobucket.com/albums/p143/daunderdweller/sq%20engineering/16Vplate2.jpg



- Dizzy blanking cover:

http://i127.photobucket.com/albums/p143/daunderdweller/sq%20engineering/16V-dizzy-cover2.jpg



- Billet oil caps: Standard type:

http://img266.imageshack.us/img266/597/dsc02186u.jpg



- Adjustable cam pulleys:

http://i127.photobucket.com/albums/p143/daunderdweller/sq%20engineering/resold-goods/technico-4age-pulleys1.jpg

http://i127.photobucket.com/albums/p143/daunderdweller/sq%20engineering/resold-goods/technico-4age-pulleys2.jpg

Vaughn
24th August 2013, 12:16 AM
Gze pistons :O :)

Think you forgot pricing on the Cam Pulleys ;)

Sam-Q
24th August 2013, 12:32 AM
Gze pistons :O :)

Think you forgot pricing on the Cam Pulleys ;)

I can source other pistons also, I just have not bothered to price them up that's all.

As for the cam-pulley price, you're right thanks and now all fixed.

Delazy
24th August 2013, 09:54 AM
Awesome work Sam. Some of the cheapest prices I've seen... :)

Sam-Q
24th August 2013, 10:37 AM
thanks John, who would of thought that buying bolts would be so cheap. I have 32 of those flywheel bolts on the way.

dove grey 64
24th August 2013, 12:11 PM
X2 on good prices. I'll start saving for those cam pulleys. Nice

turn69up
24th August 2013, 08:37 PM
So can the 20v oil pump be used on 16v aswell?

Sam-Q
24th August 2013, 09:17 PM
So can the 20v oil pump be used on 16v aswell?

yes that's the whole point, directly interchangeable but quite the upgrade.

turn69up
25th August 2013, 10:56 PM
Oh I didn't reolise, cool when i build my next motor this is a definite

Sam-Q
18th November 2013, 04:01 PM
Now in stock:

bigport +0.5mm rings
cam seals
crank pulleys
thrust bearings
small end bearings
smallport gasket and seal kit

I am trying to organise to get the following:

TPS
Bigport gasket sets
cam cover seals
head stud seals
16V injector O-rings
genuine oil filters

Sam-Q
13th February 2014, 01:06 PM
Now available 16V distributor blanking covers:

http://i127.photobucket.com/albums/p143/daunderdweller/sq%20engineering/Custom%20parts/4age-16V/16V-dizzy-blanking-1_zpsad9b8162.jpg

http://i127.photobucket.com/albums/p143/daunderdweller/sq%20engineering/Custom%20parts/4age-16V/16V-dizzy-blanking-2_zps79db02be.jpg


Stop the need for 4AGZE crank angle sensors and even be used to replace the OEM ZE cover as a dress up item. It's a universal design so it should suit all three types of 16V distributor I have found so far and even 3SG engines.


Price $90 + post inc bolts

Jake70
2nd April 2014, 08:45 AM
hi mate are you able to order 4agze conrods and rebuild kit?
thanks, Jake

Sam-Q
2nd April 2014, 10:28 PM
Jake I looked up the price of some rods a little while ago and it was the same as aftermarket. So that considered and the fact of how much they weigh that I don't suggest it.

I have little end and crank thrust bearings in stock, big ends and crank shells can be ordered in as needed but ACL performance shells are pretty good.

Getting a small port gasket set is no problem, haven't checked for bigport ZE set yet.

Water pumps and belt kits are easy.

For the oil pump pending what you have now I have an off the shelf upgrade from Toyota for $150 new and genuine.

lk8687
4th June 2014, 11:53 PM
Hi Sam,

Do you have a crankshaft for 4age 16V?If so, how much?

Leo

Sam-Q
5th June 2014, 01:38 AM
I have a single one. Suits smallport to blacktop.

New in the box for $700

K1W1 Simo
24th September 2014, 01:03 PM
Hi Sam,
Do you know where I can get my hands on a new shaft and drive gear for my distributor?
Cheers
Simon

Sam-Q
24th September 2014, 03:09 PM
Hi Sam,
Do you know where I can get my hands on a new shaft and drive gear for my distributor?
Cheers
Simon

The shaft no, as they are only listed as a complete unit but the drive gear and pin yes, I could probably get one for $40. Send me a PM if interested